mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
8bf1a529cd
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore. - Include TPIDR2 in the signal context and add the corresponding kselftests. - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time. - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables. - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values). - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure. - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice. - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone. - Further arm64 sysreg conversion and some fixes. - arm64 kselftest fixes and improvements. - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation. - Pseudo-NMI code generation optimisations. - Minor fixes for SME and TPIDR2 handling. - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmP0/QsACgkQa9axLQDI XvG+gA/+JDVEH9wRzAIZvbp9hSuohPc48xgAmIMP1eiVB0/5qeRjYAJwS33H0rXS BPC2kj9IBy/eQeM9ICg0nFd0zYznSVacITqe6NrqeJ1F+ftS4rrHdfxd+J7kIoCs V2L8e+BJvmHdhmNV2qMAgJdGlfxfQBA7fv2cy52HKYcouoOh1AUVR/x+yXVXAsCd qJP3+dlUKccgm/oc5unEC1eZ49u8O+EoasqOyfG6K5udMgzhEX3K6imT9J3hw0WT UjstYkx5uGS/prUrRCQAX96VCHoZmzEDKtQuHkHvQXEYXsYPF3ldbR2CziNJnHe7 QfSkjJlt8HAtExA+BkwEe9i0MQO/2VF5qsa2e4fA6l7uqGu3LOtS/jJd23C9n9fR Id8aBMeN6S8+MjqRA9L2uf4t6e4ISEHoG9ZRdc4WOwloxEEiJoIeun+7bHdOSZLj AFdHFCz4NXiiwC0UP0xPDI2YeCLqt5np7HmnrUqwzRpVO8UUagiJD8TIpcBSjBN9 J68eidenHUW7/SlIeaMKE2lmo8AUEAJs9AorDSugF19/ThJcQdx7vT2UAZjeVB3j 1dbbwajnlDOk/w8PQC4thFp5/MDlfst0htS3WRwa+vgkweE2EAdTU4hUZ8qEP7FQ smhYtlT1xUSTYDTqoaG/U2OWR6/UU79wP0jgcOsHXTuyYrtPI/Q= =VmXL -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ...
222 lines
7.2 KiB
Makefile
222 lines
7.2 KiB
Makefile
#
|
|
# arch/arm64/Makefile
|
|
#
|
|
# This file is included by the global makefile so that you can add your own
|
|
# architecture-specific flags and dependencies.
|
|
#
|
|
# This file is subject to the terms and conditions of the GNU General Public
|
|
# License. See the file "COPYING" in the main directory of this archive
|
|
# for more details.
|
|
#
|
|
# Copyright (C) 1995-2001 by Russell King
|
|
|
|
LDFLAGS_vmlinux :=--no-undefined -X
|
|
|
|
ifeq ($(CONFIG_RELOCATABLE), y)
|
|
# Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
|
|
# for relative relocs, since this leads to better Image compression
|
|
# with the relocation offsets always being zero.
|
|
LDFLAGS_vmlinux += -shared -Bsymbolic -z notext \
|
|
$(call ld-option, --no-apply-dynamic-relocs)
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
|
|
ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
|
|
LDFLAGS_vmlinux += --fix-cortex-a53-843419
|
|
endif
|
|
endif
|
|
|
|
cc_has_k_constraint := $(call try-run,echo \
|
|
'int main(void) { \
|
|
asm volatile("and w0, w0, %w0" :: "K" (4294967295)); \
|
|
return 0; \
|
|
}' | $(CC) -S -x c -o "$$TMP" -,,-DCONFIG_CC_HAS_K_CONSTRAINT=1)
|
|
|
|
ifeq ($(CONFIG_BROKEN_GAS_INST),y)
|
|
$(warning Detected assembler with broken .inst; disassembly will be unreliable)
|
|
endif
|
|
|
|
KBUILD_CFLAGS += -mgeneral-regs-only \
|
|
$(compat_vdso) $(cc_has_k_constraint)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, psabi)
|
|
KBUILD_AFLAGS += $(compat_vdso)
|
|
|
|
KBUILD_CFLAGS += $(call cc-option,-mabi=lp64)
|
|
KBUILD_AFLAGS += $(call cc-option,-mabi=lp64)
|
|
|
|
# Avoid generating .eh_frame* sections.
|
|
ifneq ($(CONFIG_UNWIND_TABLES),y)
|
|
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables
|
|
KBUILD_AFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables
|
|
else
|
|
KBUILD_CFLAGS += -fasynchronous-unwind-tables
|
|
KBUILD_AFLAGS += -fasynchronous-unwind-tables
|
|
endif
|
|
|
|
ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
|
|
prepare: stack_protector_prepare
|
|
stack_protector_prepare: prepare0
|
|
$(eval KBUILD_CFLAGS += -mstack-protector-guard=sysreg \
|
|
-mstack-protector-guard-reg=sp_el0 \
|
|
-mstack-protector-guard-offset=$(shell \
|
|
awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
|
|
include/generated/asm-offsets.h))
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARM64_BTI_KERNEL),y)
|
|
KBUILD_CFLAGS += -mbranch-protection=pac-ret+bti
|
|
else ifeq ($(CONFIG_ARM64_PTR_AUTH_KERNEL),y)
|
|
ifeq ($(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET),y)
|
|
KBUILD_CFLAGS += -mbranch-protection=pac-ret
|
|
else
|
|
KBUILD_CFLAGS += -msign-return-address=non-leaf
|
|
endif
|
|
else
|
|
KBUILD_CFLAGS += $(call cc-option,-mbranch-protection=none)
|
|
endif
|
|
|
|
# Tell the assembler to support instructions from the latest target
|
|
# architecture.
|
|
#
|
|
# For non-integrated assemblers we'll pass this on the command line, and for
|
|
# integrated assemblers we'll define ARM64_ASM_ARCH and ARM64_ASM_PREAMBLE for
|
|
# inline usage.
|
|
#
|
|
# We cannot pass the same arch flag to the compiler as this would allow it to
|
|
# freely generate instructions which are not supported by earlier architecture
|
|
# versions, which would prevent a single kernel image from working on earlier
|
|
# hardware.
|
|
ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
|
|
asm-arch := armv8.5-a
|
|
else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
|
|
asm-arch := armv8.4-a
|
|
else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y)
|
|
asm-arch := armv8.3-a
|
|
else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
|
|
asm-arch := armv8.2-a
|
|
endif
|
|
|
|
ifdef asm-arch
|
|
KBUILD_CFLAGS += -Wa,-march=$(asm-arch) \
|
|
-DARM64_ASM_ARCH='"$(asm-arch)"'
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
|
|
KBUILD_CFLAGS += -ffixed-x18
|
|
endif
|
|
|
|
ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
|
|
KBUILD_CPPFLAGS += -mbig-endian
|
|
CHECKFLAGS += -D__AARCH64EB__
|
|
# Prefer the baremetal ELF build target, but not all toolchains include
|
|
# it so fall back to the standard linux version if needed.
|
|
KBUILD_LDFLAGS += -EB $(call ld-option, -maarch64elfb, -maarch64linuxb -z norelro)
|
|
UTS_MACHINE := aarch64_be
|
|
else
|
|
KBUILD_CPPFLAGS += -mlittle-endian
|
|
CHECKFLAGS += -D__AARCH64EL__
|
|
# Same as above, prefer ELF but fall back to linux target if needed.
|
|
KBUILD_LDFLAGS += -EL $(call ld-option, -maarch64elf, -maarch64linux -z norelro)
|
|
UTS_MACHINE := aarch64
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LD_IS_LLD), y)
|
|
KBUILD_LDFLAGS += -z norelro
|
|
endif
|
|
|
|
CHECKFLAGS += -D__aarch64__
|
|
|
|
ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS),y)
|
|
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
|
|
CC_FLAGS_FTRACE := -fpatchable-function-entry=4,2
|
|
else ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_ARGS),y)
|
|
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
|
|
CC_FLAGS_FTRACE := -fpatchable-function-entry=2
|
|
endif
|
|
|
|
ifeq ($(CONFIG_KASAN_SW_TAGS), y)
|
|
KASAN_SHADOW_SCALE_SHIFT := 4
|
|
else ifeq ($(CONFIG_KASAN_GENERIC), y)
|
|
KASAN_SHADOW_SCALE_SHIFT := 3
|
|
endif
|
|
|
|
KBUILD_CFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
|
|
KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
|
|
KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
|
|
|
|
libs-y := arch/arm64/lib/ $(libs-y)
|
|
libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
|
|
|
|
# Default target when executing plain make
|
|
boot := arch/arm64/boot
|
|
|
|
ifeq ($(CONFIG_EFI_ZBOOT),)
|
|
KBUILD_IMAGE := $(boot)/Image.gz
|
|
else
|
|
KBUILD_IMAGE := $(boot)/vmlinuz.efi
|
|
endif
|
|
|
|
all: $(notdir $(KBUILD_IMAGE))
|
|
|
|
|
|
Image vmlinuz.efi: vmlinux
|
|
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
|
|
|
|
Image.%: Image
|
|
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
|
|
|
|
install: KBUILD_IMAGE := $(boot)/Image
|
|
install zinstall:
|
|
$(call cmd,install)
|
|
|
|
PHONY += vdso_install
|
|
vdso_install:
|
|
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
|
|
$(if $(CONFIG_COMPAT_VDSO), \
|
|
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
|
|
|
|
archprepare:
|
|
$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
|
|
ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
|
|
ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
|
|
@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
|
|
endif
|
|
endif
|
|
ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
|
|
ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
|
|
@echo "warning: LSE atomics not supported by binutils" >&2
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
|
|
# In order to do that, we should use the archprepare target, but we can't since
|
|
# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
|
|
# asm-offsets.h is built in prepare0, for which archprepare is a dependency.
|
|
# Therefore we need to generate the header after prepare0 has been made, hence
|
|
# this hack.
|
|
prepare: vdso_prepare
|
|
vdso_prepare: prepare0
|
|
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso \
|
|
include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so
|
|
ifdef CONFIG_COMPAT_VDSO
|
|
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \
|
|
include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so
|
|
endif
|
|
endif
|
|
|
|
include $(srctree)/scripts/Makefile.defconf
|
|
|
|
PHONY += virtconfig
|
|
virtconfig:
|
|
$(call merge_into_defconfig_override,defconfig,virt)
|
|
|
|
define archhelp
|
|
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
|
|
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
|
|
echo ' install - Install uncompressed kernel'
|
|
echo ' zinstall - Install compressed kernel'
|
|
echo ' Install using (your) ~/bin/installkernel or'
|
|
echo ' (distribution) /sbin/installkernel or'
|
|
echo ' install to $$(INSTALL_PATH) and run lilo'
|
|
endef
|