mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Ralf Baechle](/assets/img/avatar_default.png)
The SB1 core has a three cycle interrupt disable hazard but we were wrongly treating it as fully interlocked. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
289 lines
5.9 KiB
C
289 lines
5.9 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org>
|
|
* Copyright (C) MIPS Technologies, Inc.
|
|
* written by Ralf Baechle <ralf@linux-mips.org>
|
|
*/
|
|
#ifndef _ASM_HAZARDS_H
|
|
#define _ASM_HAZARDS_H
|
|
|
|
#include <linux/config.h>
|
|
|
|
#ifdef __ASSEMBLY__
|
|
|
|
.macro _ssnop
|
|
sll $0, $0, 1
|
|
.endm
|
|
|
|
.macro _ehb
|
|
sll $0, $0, 3
|
|
.endm
|
|
|
|
/*
|
|
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
|
|
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
|
|
* for data translations should not occur for 3 cpu cycles.
|
|
*/
|
|
#ifdef CONFIG_CPU_RM9000
|
|
|
|
.macro mtc0_tlbw_hazard
|
|
.set push
|
|
.set mips32
|
|
_ssnop; _ssnop; _ssnop; _ssnop
|
|
.set pop
|
|
.endm
|
|
|
|
.macro tlbw_eret_hazard
|
|
.set push
|
|
.set mips32
|
|
_ssnop; _ssnop; _ssnop; _ssnop
|
|
.set pop
|
|
.endm
|
|
|
|
#else
|
|
|
|
/*
|
|
* The taken branch will result in a two cycle penalty for the two killed
|
|
* instructions on R4000 / R4400. Other processors only have a single cycle
|
|
* hazard so this is nice trick to have an optimal code for a range of
|
|
* processors.
|
|
*/
|
|
.macro mtc0_tlbw_hazard
|
|
b . + 8
|
|
.endm
|
|
|
|
.macro tlbw_eret_hazard
|
|
.endm
|
|
#endif
|
|
|
|
/*
|
|
* mtc0->mfc0 hazard
|
|
* The 24K has a 2 cycle mtc0/mfc0 execution hazard.
|
|
* It is a MIPS32R2 processor so ehb will clear the hazard.
|
|
*/
|
|
|
|
#ifdef CONFIG_CPU_MIPSR2
|
|
/*
|
|
* Use a macro for ehb unless explicit support for MIPSR2 is enabled
|
|
*/
|
|
|
|
#define irq_enable_hazard
|
|
_ehb
|
|
|
|
#define irq_disable_hazard
|
|
_ehb
|
|
|
|
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
|
|
|
|
/*
|
|
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
|
|
*/
|
|
|
|
#define irq_enable_hazard
|
|
|
|
#define irq_disable_hazard
|
|
|
|
#else
|
|
|
|
/*
|
|
* Classic MIPS needs 1 - 3 nops or ssnops
|
|
*/
|
|
#define irq_enable_hazard
|
|
#define irq_disable_hazard \
|
|
_ssnop; _ssnop; _ssnop
|
|
|
|
#endif
|
|
|
|
#else /* __ASSEMBLY__ */
|
|
|
|
__asm__(
|
|
" .macro _ssnop \n"
|
|
" sll $0, $0, 1 \n"
|
|
" .endm \n"
|
|
" \n"
|
|
" .macro _ehb \n"
|
|
" sll $0, $0, 3 \n"
|
|
" .endm \n");
|
|
|
|
#ifdef CONFIG_CPU_RM9000
|
|
|
|
/*
|
|
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
|
|
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
|
|
* for data translations should not occur for 3 cpu cycles.
|
|
*/
|
|
|
|
#define mtc0_tlbw_hazard() \
|
|
__asm__ __volatile__( \
|
|
" .set mips32 \n" \
|
|
" _ssnop \n" \
|
|
" _ssnop \n" \
|
|
" _ssnop \n" \
|
|
" _ssnop \n" \
|
|
" .set mips0 \n")
|
|
|
|
#define tlbw_use_hazard() \
|
|
__asm__ __volatile__( \
|
|
" .set mips32 \n" \
|
|
" _ssnop \n" \
|
|
" _ssnop \n" \
|
|
" _ssnop \n" \
|
|
" _ssnop \n" \
|
|
" .set mips0 \n")
|
|
|
|
#else
|
|
|
|
/*
|
|
* Overkill warning ...
|
|
*/
|
|
#define mtc0_tlbw_hazard() \
|
|
__asm__ __volatile__( \
|
|
" .set noreorder \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" .set reorder \n")
|
|
|
|
#define tlbw_use_hazard() \
|
|
__asm__ __volatile__( \
|
|
" .set noreorder \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" nop \n" \
|
|
" .set reorder \n")
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Interrupt enable/disable hazards
|
|
* Some processors have hazards when modifying
|
|
* the status register to change the interrupt state
|
|
*/
|
|
|
|
#ifdef CONFIG_CPU_MIPSR2
|
|
|
|
__asm__(" .macro irq_enable_hazard \n"
|
|
" _ehb \n"
|
|
" .endm \n"
|
|
" \n"
|
|
" .macro irq_disable_hazard \n"
|
|
" _ehb \n"
|
|
" .endm \n");
|
|
|
|
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
|
|
|
|
/*
|
|
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
|
|
*/
|
|
|
|
__asm__(
|
|
" .macro irq_enable_hazard \n"
|
|
" .endm \n"
|
|
" \n"
|
|
" .macro irq_disable_hazard \n"
|
|
" .endm \n");
|
|
|
|
#else
|
|
|
|
/*
|
|
* Default for classic MIPS processors. Assume worst case hazards but don't
|
|
* care about the irq_enable_hazard - sooner or later the hardware will
|
|
* enable it and we don't care when exactly.
|
|
*/
|
|
|
|
__asm__(
|
|
" # \n"
|
|
" # There is a hazard but we do not care \n"
|
|
" # \n"
|
|
" .macro\tirq_enable_hazard \n"
|
|
" .endm \n"
|
|
" \n"
|
|
" .macro\tirq_disable_hazard \n"
|
|
" _ssnop \n"
|
|
" _ssnop \n"
|
|
" _ssnop \n"
|
|
" .endm \n");
|
|
|
|
#endif
|
|
|
|
#define irq_enable_hazard() \
|
|
__asm__ __volatile__("irq_enable_hazard")
|
|
#define irq_disable_hazard() \
|
|
__asm__ __volatile__("irq_disable_hazard")
|
|
|
|
|
|
/*
|
|
* Back-to-back hazards -
|
|
*
|
|
* What is needed to separate a move to cp0 from a subsequent read from the
|
|
* same cp0 register?
|
|
*/
|
|
#ifdef CONFIG_CPU_MIPSR2
|
|
|
|
__asm__(" .macro back_to_back_c0_hazard \n"
|
|
" _ehb \n"
|
|
" .endm \n");
|
|
|
|
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
|
|
defined(CONFIG_CPU_SB1)
|
|
|
|
__asm__(" .macro back_to_back_c0_hazard \n"
|
|
" .endm \n");
|
|
|
|
#else
|
|
|
|
__asm__(" .macro back_to_back_c0_hazard \n"
|
|
" .set noreorder \n"
|
|
" _ssnop \n"
|
|
" _ssnop \n"
|
|
" _ssnop \n"
|
|
" .set reorder \n"
|
|
" .endm");
|
|
|
|
#endif
|
|
|
|
#define back_to_back_c0_hazard() \
|
|
__asm__ __volatile__("back_to_back_c0_hazard")
|
|
|
|
|
|
/*
|
|
* Instruction execution hazard
|
|
*/
|
|
#ifdef CONFIG_CPU_MIPSR2
|
|
/*
|
|
* gcc has a tradition of misscompiling the previous construct using the
|
|
* address of a label as argument to inline assembler. Gas otoh has the
|
|
* annoying difference between la and dla which are only usable for 32-bit
|
|
* rsp. 64-bit code, so can't be used without conditional compilation.
|
|
* The alterantive is switching the assembler to 64-bit code which happens
|
|
* to work right even for 32-bit code ...
|
|
*/
|
|
#define instruction_hazard() \
|
|
do { \
|
|
unsigned long tmp; \
|
|
\
|
|
__asm__ __volatile__( \
|
|
" .set mips64r2 \n" \
|
|
" dla %0, 1f \n" \
|
|
" jr.hb %0 \n" \
|
|
" .set mips0 \n" \
|
|
"1: \n" \
|
|
: "=r" (tmp)); \
|
|
} while (0)
|
|
|
|
#else
|
|
#define instruction_hazard() do { } while (0)
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
#endif /* _ASM_HAZARDS_H */
|