linux-stable/drivers/usb
Neil Armstrong 831494cb2c usb: dwc3: core: add support for disabling SS instances in park mode
[ Upstream commit 7ba6b09fda ]

In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
 xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
 usb 2-1.1-port1: cannot reset (err = -22)

Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"

Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.

CC: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-17 10:48:41 +02:00
..
atm USB: atm: ueagle-atm: add missing endpoint check 2019-12-17 20:34:37 +01:00
c67x00
chipidea usb: chipidea: host: Disable port power only if previously enabled 2020-01-14 20:06:58 +01:00
class USB: cdc-acm: restore capability check order 2020-04-02 15:28:20 +02:00
common usb: common: Consider only available nodes for dr_mode 2019-04-03 06:26:27 +02:00
core usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters 2020-03-25 08:06:09 +01:00
dwc2 usb: dwc2: Fix in ISOC request length checking 2020-02-28 16:38:59 +01:00
dwc3 usb: dwc3: core: add support for disabling SS instances in park mode 2020-04-17 10:48:41 +02:00
early
gadget usb: gadget: serial: fix Tx stall after buffer overflow 2020-03-11 14:14:49 +01:00
host xhci: bail out early if driver can't accress host in resume 2020-04-17 10:48:39 +02:00
image USB: microtek: fix info-leak at probe 2019-10-17 13:45:05 -07:00
isp1760
misc USB: misc: iowarrior: add support for the 100 device 2020-02-28 16:38:45 +01:00
mon usb: mon: Fix a deadlock in usbmon between mmap and read 2019-12-17 20:34:41 +01:00
mtu3 usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler 2019-12-13 08:52:32 +01:00
musb usb: musb: fix crash with highmen PIO and usbmon 2020-04-02 15:28:20 +02:00
phy usb: gadget: fsl: fix link error against usb-gadget module 2020-01-27 14:50:43 +01:00
renesas_usbhs usb: renesas_usbhs: add suspend event support in gadget mode 2019-12-31 16:34:54 +01:00
roles usb: roles: fix a potential use after free 2019-12-17 20:34:39 +01:00
serial USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback 2020-04-02 15:28:20 +02:00
storage usb: storage: Add quirk for Samsung Fit flash 2020-03-11 14:14:57 +01:00
typec usb: typec: tcpci: mask event interrupts when remove driver 2020-02-11 04:33:55 -08:00
usbip usbip: Fix error path of vhci_recv_ret_submit() 2019-12-31 16:36:21 +01:00
wusbcore
Kconfig
Makefile
README
usb-skeleton.c USB: usb-skeleton: fix NULL-deref on disconnect 2019-10-17 13:44:50 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.