linux-stable/arch/powerpc/mm/init_32.c
Dale Farnsworth ccdcef72c2 powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
Add the ability for a classic ppc kernel to be loaded at an address
of 32MB.  This done by fixing a few places that assume we are loaded
at address 0, and by changing several uses of KERNELBASE to use
PAGE_OFFSET, instead.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:29 +11:00

286 lines
6.9 KiB
C

/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
* PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
#include <asm/sections.h>
#include <asm/system.h>
#include "mmu_decl.h"
#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
#endif
#endif
#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
phys_addr_t total_memory;
phys_addr_t total_lowmem;
phys_addr_t memstart_addr = (phys_addr_t)~0ull;
EXPORT_SYMBOL(memstart_addr);
phys_addr_t kernstart_addr;
EXPORT_SYMBOL(kernstart_addr);
phys_addr_t lowmem_end_addr;
int boot_mapsize;
#ifdef CONFIG_PPC_PMAC
unsigned long agp_special_page;
EXPORT_SYMBOL(agp_special_page);
#endif
void MMU_init(void);
/* XXX should be in current.h -- paulus */
extern struct task_struct *current_set[NR_CPUS];
/*
* this tells the system to map all of ram with the segregs
* (i.e. page tables) instead of the bats.
* -- Cort
*/
int __map_without_bats;
int __map_without_ltlbs;
/* max amount of low RAM to map in */
unsigned long __max_low_memory = MAX_LOW_MEM;
/*
* address of the limit of what is accessible with initial MMU setup -
* 256MB usually, but only 16MB on 601.
*/
phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000;
/*
* Check for command-line options that affect what MMU_init will do.
*/
void MMU_setup(void)
{
/* Check for nobats option (used in mapin_ram). */
if (strstr(cmd_line, "nobats")) {
__map_without_bats = 1;
}
if (strstr(cmd_line, "noltlbs")) {
__map_without_ltlbs = 1;
}
#ifdef CONFIG_DEBUG_PAGEALLOC
__map_without_bats = 1;
__map_without_ltlbs = 1;
#endif
}
/*
* MMU_init sets up the basic memory mappings for the kernel,
* including both RAM and possibly some I/O regions,
* and sets up the page tables and the MMU hardware ready to go.
*/
void __init MMU_init(void)
{
if (ppc_md.progress)
ppc_md.progress("MMU:enter", 0x111);
/* 601 can only access 16MB at the moment */
if (PVR_VER(mfspr(SPRN_PVR)) == 1)
__initial_memory_limit_addr = 0x01000000;
/* 8xx can only access 8MB at the moment */
if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
__initial_memory_limit_addr = 0x00800000;
/* parse args from command line */
MMU_setup();
if (lmb.memory.cnt > 1) {
lmb.memory.cnt = 1;
lmb_analyze();
printk(KERN_WARNING "Only using first contiguous memory region");
}
total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
lowmem_end_addr = memstart_addr + total_lowmem;
#ifdef CONFIG_FSL_BOOKE
/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
* entries, so we need to adjust lowmem to match the amount we can map
* in the fixed entries */
adjust_total_lowmem();
#endif /* CONFIG_FSL_BOOKE */
if (total_lowmem > __max_low_memory) {
total_lowmem = __max_low_memory;
lowmem_end_addr = memstart_addr + total_lowmem;
#ifndef CONFIG_HIGHMEM
total_memory = total_lowmem;
lmb_enforce_memory_limit(lowmem_end_addr);
lmb_analyze();
#endif /* CONFIG_HIGHMEM */
}
/* Initialize the MMU hardware */
if (ppc_md.progress)
ppc_md.progress("MMU:hw init", 0x300);
MMU_init_hw();
/* Map in all of RAM starting at KERNELBASE */
if (ppc_md.progress)
ppc_md.progress("MMU:mapin", 0x301);
mapin_ram();
#ifdef CONFIG_HIGHMEM
ioremap_base = PKMAP_BASE;
#else
ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
#endif /* CONFIG_HIGHMEM */
ioremap_bot = ioremap_base;
/* Map in I/O resources */
if (ppc_md.progress)
ppc_md.progress("MMU:setio", 0x302);
if (ppc_md.progress)
ppc_md.progress("MMU:exit", 0x211);
/* From now on, btext is no longer BAT mapped if it was at all */
#ifdef CONFIG_BOOTX_TEXT
btext_unmap();
#endif
}
/* This is only called until mem_init is done. */
void __init *early_get_page(void)
{
void *p;
if (init_bootmem_done) {
p = alloc_bootmem_pages(PAGE_SIZE);
} else {
p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
__initial_memory_limit_addr));
}
return p;
}
/* Free up now-unused memory */
static void free_sec(unsigned long start, unsigned long end, const char *name)
{
unsigned long cnt = 0;
while (start < end) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
free_page(start);
cnt++;
start += PAGE_SIZE;
}
if (cnt) {
printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name);
totalram_pages += cnt;
}
}
void free_initmem(void)
{
#define FREESEC(TYPE) \
free_sec((unsigned long)(&__ ## TYPE ## _begin), \
(unsigned long)(&__ ## TYPE ## _end), \
#TYPE);
printk ("Freeing unused kernel memory:");
FREESEC(init);
printk("\n");
ppc_md.progress = NULL;
#undef FREESEC
}
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (start < end)
printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
free_page(start);
totalram_pages++;
}
}
#endif
#ifdef CONFIG_PROC_KCORE
static struct kcore_list kcore_vmem;
static int __init setup_kcore(void)
{
int i;
for (i = 0; i < lmb.memory.cnt; i++) {
unsigned long base;
unsigned long size;
struct kcore_list *kcore_mem;
base = lmb.memory.region[i].base;
size = lmb.memory.region[i].size;
kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
if (!kcore_mem)
panic("%s: kmalloc failed\n", __func__);
/* must stay under 32 bits */
if ( 0xfffffffful - (unsigned long)__va(base) < size) {
size = 0xfffffffful - (unsigned long)(__va(base));
printk(KERN_DEBUG "setup_kcore: restrict size=%lx\n",
size);
}
kclist_add(kcore_mem, __va(base), size);
}
kclist_add(&kcore_vmem, (void *)VMALLOC_START,
VMALLOC_END-VMALLOC_START);
return 0;
}
module_init(setup_kcore);
#endif