linux-stable/include/linux/platform_data
Arnd Bergmann 9bdca822cb ASoC: samsung: pass filter function as pointer
As we are now passing the filter data as pointers to the drivers,
we can take the final step and also pass the filter function the
same way. I'm keeping this change separate, as there it's less
obvious that this is a net win.

Upsides of this are:

- The ASoC drivers are completely independent from the DMA engine
  implementation, which simplifies the Kconfig logic and in theory
  allows the same sound drivers to be built in a kernel that supports
  different kinds of dmaengine drivers.

- Consistency with other subsystems and drivers

On the other hand, we have a few downsides:

- The s3c24xx-dma driver now needs to be built-in for the ac97 platform
  device to be instantiated on s3c2440.

- samsung_dmaengine_pcm_config cannot be marked 'const' any more
  because the filter function pointer needs to be set at runtime.
  This is safe as long we don't have multiple different DMA engines
  in thet same system at runtime, but is nonetheless ugly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21 13:27:22 +00:00
..
ad5449.h
ad5755.h
ad7266.h
ad7291.h staging:iio:ad7291: Move out of staging 2014-07-08 21:17:30 +01:00
ad7298.h
ad7303.h
ad7791.h
ad7793.h
ad7887.h
adau17x1.h ASoC: Add ADAU1381/ADAU1781 audio CODEC support 2014-05-27 20:54:51 +01:00
adau1977.h
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h ASoC: samsung: pass filter function as pointer 2015-11-21 13:27:22 +00:00
asoc-s3c24xx_simtec.h
asoc-ti-mcbsp.h
asoc-ux500-msp.h
at24.h
at91_adc.h iio: adc: at91_adc: Add support for touchscreens without TSMR 2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h ata: pata_samsung_cf: removes s5pc100 related ata codes 2014-06-30 10:48:08 -04:00
atmel.h ARM: SoC platform updates for v4.4 2015-11-10 14:56:23 -08:00
atmel_mxt_ts.h Input: atmel_mxt_ts - use deep sleep mode when stopped 2015-08-04 17:03:52 -07:00
bcmgenet.h net: bcmgenet: enable driver to work without a device tree 2014-12-08 20:26:59 -05:00
bd6107.h
bfin_rotary.h Input: bfin_rotary - move pin lists into into platform data 2015-02-15 16:06:27 -08:00
brcmfmac-sdio.h
bt-nokia-h4p.h
camera-mx2.h
camera-mx3.h
camera-pxa.h
camera-rcar.h
clk-integrator.h
clk-lpss.h
clk-realview.h
clk-u300.h
clk-ux500.h clk/ARM: move Ux500 PRCC bases to the device tree 2015-08-24 16:49:14 -07:00
coda.h
cpuidle-exynos.h cpuidle: exynos: add coupled cpuidle support for exynos4210 2015-01-30 08:39:15 +09:00
crypto-atmel.h
crypto-ux500.h
cyttsp4.h
davinci_asp.h
db8500_thermal.h
dma-atmel.h
dma-coh901318.h
dma-dw.h dmaengine: dw: some Intel devices has no memcpy support 2015-10-31 07:32:43 +05:30
dma-ep93xx.h
dma-hsu.h dmaengine: hsu: remove platform data 2015-10-17 21:22:08 -07:00
dma-imx-sdma.h dmaengine: imx-sdma: Add support for version 3 firmware 2015-03-18 13:53:33 +05:30
dma-imx.h dmaengine: imx-sdma: Add a new DMATYPE for SAI 2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h dma: mmp_tdma: Fix build for ARM64 2015-02-03 17:47:35 -08:00
dma-mv_xor.h
dma-rcar-hpbdma.h
dma-s3c24xx.h
dma-ste-dma40.h
dmtimer-omap.h
drv260x-pdata.h Input: drv260x - add TI drv260x haptics driver 2014-08-19 22:19:28 -07:00
dwc3-omap.h
edma.h dmaengine: edma: New device tree binding 2015-10-27 10:22:45 +09:00
efm32-spi.h
efm32-uart.h
ehci-sh.h
elm.h nand: omap2: Remove horrible ifdefs to fix module probe 2014-09-22 11:37:51 -07:00
emif_plat.h
eth-netx.h
fsa9480.h
g762.h
gpio-ath79.h MIPS: ath79: Add OF support to the GPIO driver 2015-06-21 21:54:09 +02:00
gpio-davinci.h
gpio-dwapb.h GPIO: gpio-dwapb: Enable platform driver binding to MFD driver 2014-09-23 17:51:37 +02:00
gpio-lpc32xx.h
gpio-omap.h gpio: omap: Allow building as a loadable module 2015-05-06 15:23:03 +02:00
gpio-rcar.h
gpio-ts5500.h
gpio_backlight.h
hsmmc-omap.h ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin 2015-03-27 12:19:37 +01:00
hwmon-s3c.h
i2c-cbus-gpio.h
i2c-davinci.h i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery 2015-04-10 17:57:28 +02:00
i2c-designware.h i2c: designware: add support of platform data to set I2C mode 2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-mux-reg.h i2c: mux: Add register-based mux i2c-mux-reg 2015-08-24 14:05:18 +02:00
i2c-nuc900.h
i2c-s3c2410.h
ina2xx.h
intel-mid_wdt.h watchdog: add Intel MID watchdog driver support 2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
iommu-omap.h iommu/omap: Remove platform data da_start and da_end fields 2014-07-29 12:39:56 +02:00
irda-pxaficp.h
irda-sa11x0.h arm: sa1100: move irda header to linux/platform_data 2014-12-30 18:44:07 -05:00
irq-renesas-intc-irqpin.h
isl9305.h regulator: isl9305: Add Intersil ISL9305/H driver 2014-09-06 12:43:05 +01:00
itco_wdt.h mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform data 2015-08-11 15:03:21 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h Input: update email-id of Rajeev Kumar 2015-05-22 10:59:55 -07:00
keypad-ep93xx.h
keypad-nomadik-ske.h
keypad-omap.h
keypad-pxa27x.h
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h leds: netxbig: add device tree binding 2015-11-03 08:59:25 +01:00
leds-kirkwood-ns2.h leds: leds-ns2: move LED modes mapping outside of the driver 2015-08-28 14:06:06 +02:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h
leds-omap.h
leds-pca963x.h
leds-s3c24xx.h
lm3630a_bl.h
lm3639_bl.h
lp855x.h backlight: lp855x: Use private data for regulator control 2015-08-25 08:40:44 +01:00
lp8727.h
lp8755.h
lv5207lp.h
macb.h net/macb: convert to kernel doc 2015-07-27 01:10:29 -07:00
mailbox-omap.h
max197.h
max3421-hcd.h usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity 2014-05-29 11:19:30 -07:00
max6697.h
mdio-gpio.h net: mdio-gpio: move platform data header 2015-10-21 19:50:44 -07:00
mfd-mcp-sa11x0.h
microread.h
mmc-atmel-mci.h mmc: atmel-mci: move mach header to platform_data 2014-11-10 12:40:37 +01:00
mmc-davinci.h
mmc-esdhc-imx.h mmc: sdhci-esdhc-imx: add tuning-step setting support 2015-08-27 14:50:50 +02:00
mmc-mvsdio.h
mmc-mxcmmc.h
mmc-omap.h mmc: omap_hsmmc: remove prepare/complete system suspend support. 2015-01-19 09:56:08 +01:00
mmc-pxamci.h
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
mtd-davinci-aemif.h
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h nand: omap2: Add support for flash-based bad block table 2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h mtd: pxa3xx_nand: Remove unused platform-data flash specification 2015-09-02 14:11:40 -07:00
mtd-nand-s3c2410.h
mtd-onenand-omap2.h
mtd-orion_nand.h
mv_usb.h
net-cw1200.h
nfcmrvl.h NFC: nfcmrvl: add i2c driver 2015-10-27 04:21:14 +01:00
ntc_thermistor.h hwmon: (ntc_thermistor) Add support for ncpXXwf104 2015-05-31 22:58:36 -07:00
nxp-nci.h NFC: nxp-nci: Add support for NXP NCI chips 2015-03-26 11:07:50 +01:00
omap-twl4030.h
omap-wd-timer.h
omap1_bl.h
omap_drm.h
pca953x.h
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h
pinctrl-single.h
pixcir_i2c_ts.h Input: pixcir_i2c_ts - switch the device over to gpiod 2015-07-11 17:28:08 -07:00
pn544.h
pxa2xx_udc.h
pxa_sdhci.h mmc: sdhci-pxav3: Move private driver data to driver source 2014-11-10 12:40:31 +01:00
regulator-haptic.h Input: add regulator haptic driver 2014-12-21 18:59:20 -08:00
remoteproc-omap.h
s3c-hsotg.h usb: dwc2: rename all s3c_* to dwc2_* 2015-09-27 10:54:31 -05:00
s3c-hsudc.h
sa11x0-serial.h
sc18is602.h
serial-imx.h serial: imx: drop support for IRDA 2015-03-07 03:26:32 +01:00
serial-omap.h ARM: OMAP: serial: remove last vestige of DTR_gpio support. 2014-11-10 09:06:44 -08:00
serial-sccnxp.h
sh_ipmmu.h
shmob_drm.h
sht15.h
shtc1.h hwmon: add support for Sensirion SHTC1 sensor 2014-06-12 08:36:48 -07:00
si5351.h clk: si5351: Do not pass struct clk in platform_data 2015-05-08 11:22:30 -07:00
simplefb.h
sky81452-backlight.h backlight: Add support Skyworks SKY81452 backlight driver 2015-03-12 09:08:19 +00:00
spi-clps711x.h
spi-davinci.h spi: davinci: Choose correct pre-scaler limit based on SOC 2015-07-24 17:35:51 +01:00
spi-ep93xx.h
spi-imx.h
spi-mt65xx.h spi: mediatek: fix spi incorrect endian usage 2015-08-20 11:09:47 -07:00
spi-nuc900.h
spi-omap2-mcspi.h
spi-s3c64xx.h
ssm2518.h
st-nci.h NFC: st-nci: Add ese-present/uicc-present dts properties 2015-10-27 03:55:10 +01:00
st21nfca.h NFC: st21nfca: Adding support for secure element 2015-01-28 00:03:36 +01:00
st33zp24.h tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy) 2015-03-18 22:43:06 +01:00
st1232_pdata.h
st_sensors_pdata.h
syscon.h mfd: syscon: Add platform data with a regmap config name 2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h
usb-ehci-mxc.h ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
usb-ehci-orion.h
usb-musb-ux500.h
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
usb-omap1.h
usb-pxa3xx-ulpi.h
usb-rcar-phy.h
usb-s3c2410_udc.h
usb3503.h
ux500_wdt.h
video-clcd-versatile.h video: fix up versatile CLCD helper move 2014-07-23 17:41:00 +02:00
video-ep93xx.h ARM/fb: ep93xx: switch framebuffer to use modedb only 2015-08-13 12:25:44 +02:00
video-imxfb.h
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h
video_s3c.h
voltage-omap.h
wiznet.h
wkup_m3.h remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3 2015-06-17 09:58:08 +03:00
zforce_ts.h Input: zforce_ts - convert to use the gpiod interface 2015-07-08 21:50:57 -07:00