mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-29 23:53:32 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/media/i2c/ov9640.c
Tomi Valkeinen 0d346d2a6f media: v4l2-subdev: add subdev-wide state struct 
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.

I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.

This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.

The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:

dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done

Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:

For drivers/media/i2c/s5k5baf.c:

	@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
	 				&s5k5baf_cis_rect,
	 				v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
	 				v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
	-				v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
	+				v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
	 			};
	 		s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
	 		return 0;

For drivers/media/platform/s3c-camif/camif-capture.c:

	@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
	 		*mf = camif->mbus_fmt;
	 		break;

	-	case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
	+	case CAMIF_SD_PAD_SOURCE_C:
	 		/* crop rectangle at camera interface input */
	 		mf->width = camif->camif_crop.width;
	 		mf->height = camif->camif_crop.height;
	@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
	 		}
	 		break;

	-	case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
	+	case CAMIF_SD_PAD_SOURCE_C:
	 		/* Pixel format can be only changed on the sink pad. */
	 		mf->code = camif->mbus_fmt.code;
	 		mf->width = crop->width;

The semantic patch is:

// <smpl>

// Change function parameter

@@
identifier func;
identifier cfg;
@@

 func(...,
-   struct v4l2_subdev_pad_config *cfg
+   struct v4l2_subdev_state *sd_state
    , ...)
 {
 <...
- cfg
+ sd_state
 ...>
 }

// Change function declaration parameter

@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
-   struct v4l2_subdev_pad_config *cfg
+   struct v4l2_subdev_state *sd_state
    , ...);

// Change function return value

@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
 *func(...)
 {
    ...
 }

// Change function declaration return value

@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
 *func(...);

// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.

@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
    ...
    struct v4l2_subdev_pad_config pad_cfg;
+   struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };

    <+...

(
    v4l2_subdev_call
|
    sensor_call
|
    isi_try_fse
|
    isc_try_fse
|
    saa_call_all
)
    (...,
-   &pad_cfg
+   &pad_state
    ,...)

    ...+>
}

// If the function uses fields from pad_config, access via state->pads

@@
identifier func;
identifier state;
@@
 func(...,
    struct v4l2_subdev_state *state
    , ...)
 {
    <...
(
-   state->try_fmt
+   state->pads->try_fmt
|
-   state->try_crop
+   state->pads->try_crop
|
-   state->try_compose
+   state->pads->try_compose
)
    ...>
}

// If the function accesses the filehandle, use fh->state instead

@@
struct v4l2_subdev_fh *fh;
@@
-    fh->pad
+    fh->state

@@
struct v4l2_subdev_fh fh;
@@
-    fh.pad
+    fh.state

// Start of vsp1 specific

@@
@@
struct vsp1_entity {
    ...
-    struct v4l2_subdev_pad_config *config;
+    struct v4l2_subdev_state *config;
    ...
};

@@
symbol entity;
@@
vsp1_entity_init(...)
{
    ...
    entity->config =
-    v4l2_subdev_alloc_pad_config
+    v4l2_subdev_alloc_state
    (&entity->subdev);
    ...
}

@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
    ...
-   v4l2_subdev_free_pad_config
+   v4l2_subdev_free_state
    (entity->config);
    ...
}

@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
    ...
-    struct v4l2_subdev_pad_config *config;
+    struct v4l2_subdev_state *config;
    ...
}

// End of vsp1 specific

// Start of rcar specific

@@
identifier sd;
identifier pad_cfg;
@@
 rvin_try_format(...)
 {
    ...
-   struct v4l2_subdev_pad_config *pad_cfg;
+   struct v4l2_subdev_state *sd_state;
    ...
-   pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+   sd_state = v4l2_subdev_alloc_state(sd);
    <...
-   pad_cfg
+   sd_state
    ...>
-   v4l2_subdev_free_pad_config(pad_cfg);
+   v4l2_subdev_free_state(sd_state);
    ...
 }

// End of rcar specific

// Start of rockchip specific

@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@

 func(...)
 {
+   struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
    ...
-   rsz->pad_cfg
+   &state
    ...
 }

@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@

 func(...)
 {
+   struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
    ...
-   isp->pad_cfg
+   &state
    ...
 }

@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@

 rkisp1_isp_register(...)
 {
+   struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
    ...
-   rkisp1->isp.pad_cfg
+   &state
    ...
 }

// End of rockchip specific

// Start of tegra-video specific

@@
identifier sd;
identifier pad_cfg;
@@
 __tegra_channel_try_format(...)
 {
    ...
-   struct v4l2_subdev_pad_config *pad_cfg;
+   struct v4l2_subdev_state *sd_state;
    ...
-   pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+   sd_state = v4l2_subdev_alloc_state(sd);
    <...
-   pad_cfg
+   sd_state
    ...>
-   v4l2_subdev_free_pad_config(pad_cfg);
+   v4l2_subdev_free_state(sd_state);
    ...
 }

@@
identifier sd_state;
@@
 __tegra_channel_try_format(...)
 {
    ...
    struct v4l2_subdev_state *sd_state;
    <...
-   sd_state->try_crop
+   sd_state->pads->try_crop
    ...>
 }

// End of tegra-video specific

// </smpl>

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17 10:01:27 +02:00

775 lines
19 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* OmniVision OV96xx Camera Driver
*
* Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
*
* Based on ov772x camera driver:
*
* Copyright (C) 2008 Renesas Solutions Corp.
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
*
* Based on ov7670 and soc_camera_platform driver,
* transition from soc_camera to pxa_camera based on mt9m111
*
* Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
* Copyright (C) 2008 Magnus Damm
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
*/
#include <linux/clk.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
#include <media/v4l2-async.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
#include <linux/gpio/consumer.h>
#include "ov9640.h"
#define to_ov9640_sensor(sd) container_of(sd, struct ov9640_priv, subdev)
/* default register setup */
static const struct ov9640_reg ov9640_regs_dflt[] = {
{ OV9640_COM5, OV9640_COM5_SYSCLK | OV9640_COM5_LONGEXP },
{ OV9640_COM6, OV9640_COM6_OPT_BLC | OV9640_COM6_ADBLC_BIAS |
OV9640_COM6_FMT_RST | OV9640_COM6_ADBLC_OPTEN },
{ OV9640_PSHFT, OV9640_PSHFT_VAL(0x01) },
{ OV9640_ACOM, OV9640_ACOM_2X_ANALOG | OV9640_ACOM_RSVD },
{ OV9640_TSLB, OV9640_TSLB_YUYV_UYVY },
{ OV9640_COM16, OV9640_COM16_RB_AVG },
/* Gamma curve P */
{ 0x6c, 0x40 }, { 0x6d, 0x30 }, { 0x6e, 0x4b }, { 0x6f, 0x60 },
{ 0x70, 0x70 }, { 0x71, 0x70 }, { 0x72, 0x70 }, { 0x73, 0x70 },
{ 0x74, 0x60 }, { 0x75, 0x60 }, { 0x76, 0x50 }, { 0x77, 0x48 },
{ 0x78, 0x3a }, { 0x79, 0x2e }, { 0x7a, 0x28 }, { 0x7b, 0x22 },
/* Gamma curve T */
{ 0x7c, 0x04 }, { 0x7d, 0x07 }, { 0x7e, 0x10 }, { 0x7f, 0x28 },
{ 0x80, 0x36 }, { 0x81, 0x44 }, { 0x82, 0x52 }, { 0x83, 0x60 },
{ 0x84, 0x6c }, { 0x85, 0x78 }, { 0x86, 0x8c }, { 0x87, 0x9e },
{ 0x88, 0xbb }, { 0x89, 0xd2 }, { 0x8a, 0xe6 },
};
/* Configurations
* NOTE: for YUV, alter the following registers:
* COM12 |= OV9640_COM12_YUV_AVG
*
* for RGB, alter the following registers:
* COM7 |= OV9640_COM7_RGB
* COM13 |= OV9640_COM13_RGB_AVG
* COM15 |= proper RGB color encoding mode
*/
static const struct ov9640_reg ov9640_regs_qqcif[] = {
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x0f) },
{ OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP },
{ OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
{ OV9640_COM7, OV9640_COM7_QCIF },
{ OV9640_COM12, OV9640_COM12_RSVD },
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
};
static const struct ov9640_reg ov9640_regs_qqvga[] = {
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) },
{ OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP },
{ OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
{ OV9640_COM7, OV9640_COM7_QVGA },
{ OV9640_COM12, OV9640_COM12_RSVD },
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
};
static const struct ov9640_reg ov9640_regs_qcif[] = {
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) },
{ OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
{ OV9640_COM7, OV9640_COM7_QCIF },
{ OV9640_COM12, OV9640_COM12_RSVD },
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
};
static const struct ov9640_reg ov9640_regs_qvga[] = {
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) },
{ OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
{ OV9640_COM7, OV9640_COM7_QVGA },
{ OV9640_COM12, OV9640_COM12_RSVD },
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
};
static const struct ov9640_reg ov9640_regs_cif[] = {
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) },
{ OV9640_COM3, OV9640_COM3_VP },
{ OV9640_COM7, OV9640_COM7_CIF },
{ OV9640_COM12, OV9640_COM12_RSVD },
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
};
static const struct ov9640_reg ov9640_regs_vga[] = {
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) },
{ OV9640_COM3, OV9640_COM3_VP },
{ OV9640_COM7, OV9640_COM7_VGA },
{ OV9640_COM12, OV9640_COM12_RSVD },
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
};
static const struct ov9640_reg ov9640_regs_sxga[] = {
{ OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) },
{ OV9640_COM3, OV9640_COM3_VP },
{ OV9640_COM7, 0 },
{ OV9640_COM12, OV9640_COM12_RSVD },
{ OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
{ OV9640_COM15, OV9640_COM15_OR_10F0 },
};
static const struct ov9640_reg ov9640_regs_yuv[] = {
{ OV9640_MTX1, 0x58 },
{ OV9640_MTX2, 0x48 },
{ OV9640_MTX3, 0x10 },
{ OV9640_MTX4, 0x28 },
{ OV9640_MTX5, 0x48 },
{ OV9640_MTX6, 0x70 },
{ OV9640_MTX7, 0x40 },
{ OV9640_MTX8, 0x40 },
{ OV9640_MTX9, 0x40 },
{ OV9640_MTXS, 0x0f },
};
static const struct ov9640_reg ov9640_regs_rgb[] = {
{ OV9640_MTX1, 0x71 },
{ OV9640_MTX2, 0x3e },
{ OV9640_MTX3, 0x0c },
{ OV9640_MTX4, 0x33 },
{ OV9640_MTX5, 0x72 },
{ OV9640_MTX6, 0x00 },
{ OV9640_MTX7, 0x2b },
{ OV9640_MTX8, 0x66 },
{ OV9640_MTX9, 0xd2 },
{ OV9640_MTXS, 0x65 },
};
static const u32 ov9640_codes[] = {
MEDIA_BUS_FMT_UYVY8_2X8,
MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
MEDIA_BUS_FMT_RGB565_2X8_LE,
};
/* read a register */
static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val)
{
int ret;
u8 data = reg;
struct i2c_msg msg = {
.addr = client->addr,
.flags = 0,
.len = 1,
.buf = &data,
};
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret < 0)
goto err;
msg.flags = I2C_M_RD;
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret < 0)
goto err;
*val = data;
return 0;
err:
dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
return ret;
}
/* write a register */
static int ov9640_reg_write(struct i2c_client *client, u8 reg, u8 val)
{
int ret;
u8 _val;
unsigned char data[2] = { reg, val };
struct i2c_msg msg = {
.addr = client->addr,
.flags = 0,
.len = 2,
.buf = data,
};
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret < 0) {
dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
return ret;
}
/* we have to read the register back ... no idea why, maybe HW bug */
ret = ov9640_reg_read(client, reg, &_val);
if (ret)
dev_err(&client->dev,
"Failed reading back register 0x%02x!\n", reg);
return 0;
}
/* Read a register, alter its bits, write it back */
static int ov9640_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 unset)
{
u8 val;
int ret;
ret = ov9640_reg_read(client, reg, &val);
if (ret) {
dev_err(&client->dev,
"[Read]-Modify-Write of register %02x failed!\n", reg);
return ret;
}
val |= set;
val &= ~unset;
ret = ov9640_reg_write(client, reg, val);
if (ret)
dev_err(&client->dev,
"Read-Modify-[Write] of register %02x failed!\n", reg);
return ret;
}
/* Soft reset the camera. This has nothing to do with the RESET pin! */
static int ov9640_reset(struct i2c_client *client)
{
int ret;
ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET);
if (ret)
dev_err(&client->dev,
"An error occurred while entering soft reset!\n");
return ret;
}
/* Start/Stop streaming from the device */
static int ov9640_s_stream(struct v4l2_subdev *sd, int enable)
{
return 0;
}
/* Set status of additional camera capabilities */
static int ov9640_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct ov9640_priv *priv = container_of(ctrl->handler,
struct ov9640_priv, hdl);
struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
if (ctrl->val)
return ov9640_reg_rmw(client, OV9640_MVFP,
OV9640_MVFP_V, 0);
return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_V);
case V4L2_CID_HFLIP:
if (ctrl->val)
return ov9640_reg_rmw(client, OV9640_MVFP,
OV9640_MVFP_H, 0);
return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_H);
}
return -EINVAL;
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int ov9640_get_register(struct v4l2_subdev *sd,
struct v4l2_dbg_register *reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret;
u8 val;
if (reg->reg & ~0xff)
return -EINVAL;
reg->size = 1;
ret = ov9640_reg_read(client, reg->reg, &val);
if (ret)
return ret;
reg->val = (__u64)val;
return 0;
}
static int ov9640_set_register(struct v4l2_subdev *sd,
const struct v4l2_dbg_register *reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
if (reg->reg & ~0xff || reg->val & ~0xff)
return -EINVAL;
return ov9640_reg_write(client, reg->reg, reg->val);
}
#endif
static int ov9640_s_power(struct v4l2_subdev *sd, int on)
{
struct ov9640_priv *priv = to_ov9640_sensor(sd);
int ret = 0;
if (on) {
gpiod_set_value(priv->gpio_power, 1);
usleep_range(1000, 2000);
ret = clk_prepare_enable(priv->clk);
usleep_range(1000, 2000);
gpiod_set_value(priv->gpio_reset, 0);
} else {
gpiod_set_value(priv->gpio_reset, 1);
usleep_range(1000, 2000);
clk_disable_unprepare(priv->clk);
usleep_range(1000, 2000);
gpiod_set_value(priv->gpio_power, 0);
}
return ret;
}
/* select nearest higher resolution for capture */
static void ov9640_res_roundup(u32 *width, u32 *height)
{
unsigned int i;
enum { QQCIF, QQVGA, QCIF, QVGA, CIF, VGA, SXGA };
static const u32 res_x[] = { 88, 160, 176, 320, 352, 640, 1280 };
static const u32 res_y[] = { 72, 120, 144, 240, 288, 480, 960 };
for (i = 0; i < ARRAY_SIZE(res_x); i++) {
if (res_x[i] >= *width && res_y[i] >= *height) {
*width = res_x[i];
*height = res_y[i];
return;
}
}
*width = res_x[SXGA];
*height = res_y[SXGA];
}
/* Prepare necessary register changes depending on color encoding */
static void ov9640_alter_regs(u32 code,
struct ov9640_reg_alt *alt)
{
switch (code) {
default:
case MEDIA_BUS_FMT_UYVY8_2X8:
alt->com12 = OV9640_COM12_YUV_AVG;
alt->com13 = OV9640_COM13_Y_DELAY_EN |
OV9640_COM13_YUV_DLY(0x01);
break;
case MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE:
alt->com7 = OV9640_COM7_RGB;
alt->com13 = OV9640_COM13_RGB_AVG;
alt->com15 = OV9640_COM15_RGB_555;
break;
case MEDIA_BUS_FMT_RGB565_2X8_LE:
alt->com7 = OV9640_COM7_RGB;
alt->com13 = OV9640_COM13_RGB_AVG;
alt->com15 = OV9640_COM15_RGB_565;
break;
}
}
/* Setup registers according to resolution and color encoding */
static int ov9640_write_regs(struct i2c_client *client, u32 width,
u32 code, struct ov9640_reg_alt *alts)
{
const struct ov9640_reg *ov9640_regs, *matrix_regs;
unsigned int ov9640_regs_len, matrix_regs_len;
unsigned int i;
int ret;
u8 val;
/* select register configuration for given resolution */
switch (width) {
case W_QQCIF:
ov9640_regs = ov9640_regs_qqcif;
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqcif);
break;
case W_QQVGA:
ov9640_regs = ov9640_regs_qqvga;
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqvga);
break;
case W_QCIF:
ov9640_regs = ov9640_regs_qcif;
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qcif);
break;
case W_QVGA:
ov9640_regs = ov9640_regs_qvga;
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qvga);
break;
case W_CIF:
ov9640_regs = ov9640_regs_cif;
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_cif);
break;
case W_VGA:
ov9640_regs = ov9640_regs_vga;
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_vga);
break;
case W_SXGA:
ov9640_regs = ov9640_regs_sxga;
ov9640_regs_len = ARRAY_SIZE(ov9640_regs_sxga);
break;
default:
dev_err(&client->dev, "Failed to select resolution!\n");
return -EINVAL;
}
/* select color matrix configuration for given color encoding */
if (code == MEDIA_BUS_FMT_UYVY8_2X8) {
matrix_regs = ov9640_regs_yuv;
matrix_regs_len = ARRAY_SIZE(ov9640_regs_yuv);
} else {
matrix_regs = ov9640_regs_rgb;
matrix_regs_len = ARRAY_SIZE(ov9640_regs_rgb);
}
/* write register settings into the module */
for (i = 0; i < ov9640_regs_len; i++) {
val = ov9640_regs[i].val;
switch (ov9640_regs[i].reg) {
case OV9640_COM7:
val |= alts->com7;
break;
case OV9640_COM12:
val |= alts->com12;
break;
case OV9640_COM13:
val |= alts->com13;
break;
case OV9640_COM15:
val |= alts->com15;
break;
}
ret = ov9640_reg_write(client, ov9640_regs[i].reg, val);
if (ret)
return ret;
}
/* write color matrix configuration into the module */
for (i = 0; i < matrix_regs_len; i++) {
ret = ov9640_reg_write(client, matrix_regs[i].reg,
matrix_regs[i].val);
if (ret)
return ret;
}
return 0;
}
/* program default register values */
static int ov9640_prog_dflt(struct i2c_client *client)
{
unsigned int i;
int ret;
for (i = 0; i < ARRAY_SIZE(ov9640_regs_dflt); i++) {
ret = ov9640_reg_write(client, ov9640_regs_dflt[i].reg,
ov9640_regs_dflt[i].val);
if (ret)
return ret;
}
/* wait for the changes to actually happen, 140ms are not enough yet */
msleep(150);
return 0;
}
/* set the format we will capture in */
static int ov9640_s_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mf)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov9640_reg_alt alts = {0};
int ret;
ov9640_alter_regs(mf->code, &alts);
ov9640_reset(client);
ret = ov9640_prog_dflt(client);
if (ret)
return ret;
return ov9640_write_regs(client, mf->width, mf->code, &alts);
}
static int ov9640_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *format)
{
struct v4l2_mbus_framefmt *mf = &format->format;
if (format->pad)
return -EINVAL;
ov9640_res_roundup(&mf->width, &mf->height);
mf->field = V4L2_FIELD_NONE;
switch (mf->code) {
case MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE:
case MEDIA_BUS_FMT_RGB565_2X8_LE:
mf->colorspace = V4L2_COLORSPACE_SRGB;
break;
default:
mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
fallthrough;
case MEDIA_BUS_FMT_UYVY8_2X8:
mf->colorspace = V4L2_COLORSPACE_JPEG;
break;
}
if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
return ov9640_s_fmt(sd, mf);
sd_state->pads->try_fmt = *mf;
return 0;
}
static int ov9640_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->pad || code->index >= ARRAY_SIZE(ov9640_codes))
return -EINVAL;
code->code = ov9640_codes[code->index];
return 0;
}
static int ov9640_get_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_selection *sel)
{
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
return -EINVAL;
sel->r.left = 0;
sel->r.top = 0;
switch (sel->target) {
case V4L2_SEL_TGT_CROP_BOUNDS:
case V4L2_SEL_TGT_CROP:
sel->r.width = W_SXGA;
sel->r.height = H_SXGA;
return 0;
default:
return -EINVAL;
}
}
static int ov9640_video_probe(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov9640_priv *priv = to_ov9640_sensor(sd);
u8 pid, ver, midh, midl;
const char *devname;
int ret;
ret = ov9640_s_power(&priv->subdev, 1);
if (ret < 0)
return ret;
/*
* check and show product ID and manufacturer ID
*/
ret = ov9640_reg_read(client, OV9640_PID, &pid);
if (!ret)
ret = ov9640_reg_read(client, OV9640_VER, &ver);
if (!ret)
ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
if (!ret)
ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
if (ret)
goto done;
switch (VERSION(pid, ver)) {
case OV9640_V2:
devname = "ov9640";
priv->revision = 2;
break;
case OV9640_V3:
devname = "ov9640";
priv->revision = 3;
break;
default:
dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
ret = -ENODEV;
goto done;
}
dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
devname, pid, ver, midh, midl);
ret = v4l2_ctrl_handler_setup(&priv->hdl);
done:
ov9640_s_power(&priv->subdev, 0);
return ret;
}
static const struct v4l2_ctrl_ops ov9640_ctrl_ops = {
.s_ctrl = ov9640_s_ctrl,
};
static const struct v4l2_subdev_core_ops ov9640_core_ops = {
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = ov9640_get_register,
.s_register = ov9640_set_register,
#endif
.s_power = ov9640_s_power,
};
/* Request bus settings on camera side */
static int ov9640_get_mbus_config(struct v4l2_subdev *sd,
unsigned int pad,
struct v4l2_mbus_config *cfg)
{
cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
V4L2_MBUS_DATA_ACTIVE_HIGH;
cfg->type = V4L2_MBUS_PARALLEL;
return 0;
}
static const struct v4l2_subdev_video_ops ov9640_video_ops = {
.s_stream = ov9640_s_stream,
};
static const struct v4l2_subdev_pad_ops ov9640_pad_ops = {
.enum_mbus_code = ov9640_enum_mbus_code,
.get_selection = ov9640_get_selection,
.set_fmt = ov9640_set_fmt,
.get_mbus_config = ov9640_get_mbus_config,
};
static const struct v4l2_subdev_ops ov9640_subdev_ops = {
.core = &ov9640_core_ops,
.video = &ov9640_video_ops,
.pad = &ov9640_pad_ops,
};
/*
* i2c_driver function
*/
static int ov9640_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
struct ov9640_priv *priv;
int ret;
priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->gpio_power = devm_gpiod_get(&client->dev, "Camera power",
GPIOD_OUT_LOW);
if (IS_ERR(priv->gpio_power)) {
ret = PTR_ERR(priv->gpio_power);
return ret;
}
priv->gpio_reset = devm_gpiod_get(&client->dev, "Camera reset",
GPIOD_OUT_HIGH);
if (IS_ERR(priv->gpio_reset)) {
ret = PTR_ERR(priv->gpio_reset);
return ret;
}
v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
v4l2_ctrl_handler_init(&priv->hdl, 2);
v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
V4L2_CID_HFLIP, 0, 1, 1, 0);
if (priv->hdl.error) {
ret = priv->hdl.error;
goto ectrlinit;
}
priv->subdev.ctrl_handler = &priv->hdl;
priv->clk = devm_clk_get(&client->dev, "mclk");
if (IS_ERR(priv->clk)) {
ret = PTR_ERR(priv->clk);
goto ectrlinit;
}
ret = ov9640_video_probe(client);
if (ret)
goto ectrlinit;
priv->subdev.dev = &client->dev;
ret = v4l2_async_register_subdev(&priv->subdev);
if (ret)
goto ectrlinit;
return 0;
ectrlinit:
v4l2_ctrl_handler_free(&priv->hdl);
return ret;
}
static int ov9640_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov9640_priv *priv = to_ov9640_sensor(sd);
v4l2_async_unregister_subdev(&priv->subdev);
v4l2_ctrl_handler_free(&priv->hdl);
return 0;
}
static const struct i2c_device_id ov9640_id[] = {
{ "ov9640", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ov9640_id);
static struct i2c_driver ov9640_i2c_driver = {
.driver = {
.name = "ov9640",
},
.probe = ov9640_probe,
.remove = ov9640_remove,
.id_table = ov9640_id,
};
module_i2c_driver(ov9640_i2c_driver);
MODULE_DESCRIPTION("OmniVision OV96xx CMOS Image Sensor driver");
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
MODULE_LICENSE("GPL v2");
Reference in a new issue View git blame Copy permalink