mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Alexandre Belloni](/assets/img/avatar_default.png)
When CONFIG_OF is disabled then the matching table is not referenced. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210202112219.3610853-16-alexandre.belloni@bootlin.com
919 lines
22 KiB
C
919 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Micro Crystal RV-3029 / RV-3049 rtc class driver
|
|
*
|
|
* Author: Gregory Hermant <gregory.hermant@calao-systems.com>
|
|
* Michael Buesch <m@bues.ch>
|
|
*
|
|
* based on previously existing rtc class drivers
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* Register map */
|
|
/* control section */
|
|
#define RV3029_ONOFF_CTRL 0x00
|
|
#define RV3029_ONOFF_CTRL_WE BIT(0)
|
|
#define RV3029_ONOFF_CTRL_TE BIT(1)
|
|
#define RV3029_ONOFF_CTRL_TAR BIT(2)
|
|
#define RV3029_ONOFF_CTRL_EERE BIT(3)
|
|
#define RV3029_ONOFF_CTRL_SRON BIT(4)
|
|
#define RV3029_ONOFF_CTRL_TD0 BIT(5)
|
|
#define RV3029_ONOFF_CTRL_TD1 BIT(6)
|
|
#define RV3029_ONOFF_CTRL_CLKINT BIT(7)
|
|
#define RV3029_IRQ_CTRL 0x01
|
|
#define RV3029_IRQ_CTRL_AIE BIT(0)
|
|
#define RV3029_IRQ_CTRL_TIE BIT(1)
|
|
#define RV3029_IRQ_CTRL_V1IE BIT(2)
|
|
#define RV3029_IRQ_CTRL_V2IE BIT(3)
|
|
#define RV3029_IRQ_CTRL_SRIE BIT(4)
|
|
#define RV3029_IRQ_FLAGS 0x02
|
|
#define RV3029_IRQ_FLAGS_AF BIT(0)
|
|
#define RV3029_IRQ_FLAGS_TF BIT(1)
|
|
#define RV3029_IRQ_FLAGS_V1IF BIT(2)
|
|
#define RV3029_IRQ_FLAGS_V2IF BIT(3)
|
|
#define RV3029_IRQ_FLAGS_SRF BIT(4)
|
|
#define RV3029_STATUS 0x03
|
|
#define RV3029_STATUS_VLOW1 BIT(2)
|
|
#define RV3029_STATUS_VLOW2 BIT(3)
|
|
#define RV3029_STATUS_SR BIT(4)
|
|
#define RV3029_STATUS_PON BIT(5)
|
|
#define RV3029_STATUS_EEBUSY BIT(7)
|
|
#define RV3029_RST_CTRL 0x04
|
|
#define RV3029_RST_CTRL_SYSR BIT(4)
|
|
#define RV3029_CONTROL_SECTION_LEN 0x05
|
|
|
|
/* watch section */
|
|
#define RV3029_W_SEC 0x08
|
|
#define RV3029_W_MINUTES 0x09
|
|
#define RV3029_W_HOURS 0x0A
|
|
#define RV3029_REG_HR_12_24 BIT(6) /* 24h/12h mode */
|
|
#define RV3029_REG_HR_PM BIT(5) /* PM/AM bit in 12h mode */
|
|
#define RV3029_W_DATE 0x0B
|
|
#define RV3029_W_DAYS 0x0C
|
|
#define RV3029_W_MONTHS 0x0D
|
|
#define RV3029_W_YEARS 0x0E
|
|
#define RV3029_WATCH_SECTION_LEN 0x07
|
|
|
|
/* alarm section */
|
|
#define RV3029_A_SC 0x10
|
|
#define RV3029_A_MN 0x11
|
|
#define RV3029_A_HR 0x12
|
|
#define RV3029_A_DT 0x13
|
|
#define RV3029_A_DW 0x14
|
|
#define RV3029_A_MO 0x15
|
|
#define RV3029_A_YR 0x16
|
|
#define RV3029_A_AE_X BIT(7)
|
|
#define RV3029_ALARM_SECTION_LEN 0x07
|
|
|
|
/* timer section */
|
|
#define RV3029_TIMER_LOW 0x18
|
|
#define RV3029_TIMER_HIGH 0x19
|
|
|
|
/* temperature section */
|
|
#define RV3029_TEMP_PAGE 0x20
|
|
|
|
/* eeprom data section */
|
|
#define RV3029_E2P_EEDATA1 0x28
|
|
#define RV3029_E2P_EEDATA2 0x29
|
|
#define RV3029_E2PDATA_SECTION_LEN 0x02
|
|
|
|
/* eeprom control section */
|
|
#define RV3029_CONTROL_E2P_EECTRL 0x30
|
|
#define RV3029_EECTRL_THP BIT(0) /* temp scan interval */
|
|
#define RV3029_EECTRL_THE BIT(1) /* thermometer enable */
|
|
#define RV3029_EECTRL_FD0 BIT(2) /* CLKOUT */
|
|
#define RV3029_EECTRL_FD1 BIT(3) /* CLKOUT */
|
|
#define RV3029_TRICKLE_1K BIT(4) /* 1.5K resistance */
|
|
#define RV3029_TRICKLE_5K BIT(5) /* 5K resistance */
|
|
#define RV3029_TRICKLE_20K BIT(6) /* 20K resistance */
|
|
#define RV3029_TRICKLE_80K BIT(7) /* 80K resistance */
|
|
#define RV3029_TRICKLE_MASK (RV3029_TRICKLE_1K |\
|
|
RV3029_TRICKLE_5K |\
|
|
RV3029_TRICKLE_20K |\
|
|
RV3029_TRICKLE_80K)
|
|
#define RV3029_TRICKLE_SHIFT 4
|
|
#define RV3029_CONTROL_E2P_XOFFS 0x31 /* XTAL offset */
|
|
#define RV3029_CONTROL_E2P_XOFFS_SIGN BIT(7) /* Sign: 1->pos, 0->neg */
|
|
#define RV3029_CONTROL_E2P_QCOEF 0x32 /* XTAL temp drift coef */
|
|
#define RV3029_CONTROL_E2P_TURNOVER 0x33 /* XTAL turnover temp (in *C) */
|
|
#define RV3029_CONTROL_E2P_TOV_MASK 0x3F /* XTAL turnover temp mask */
|
|
|
|
/* user ram section */
|
|
#define RV3029_RAM_PAGE 0x38
|
|
#define RV3029_RAM_SECTION_LEN 8
|
|
|
|
struct rv3029_data {
|
|
struct device *dev;
|
|
struct rtc_device *rtc;
|
|
struct regmap *regmap;
|
|
int irq;
|
|
};
|
|
|
|
static int rv3029_eeprom_busywait(struct rv3029_data *rv3029)
|
|
{
|
|
unsigned int sr;
|
|
int i, ret;
|
|
|
|
for (i = 100; i > 0; i--) {
|
|
ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
|
|
if (ret < 0)
|
|
break;
|
|
if (!(sr & RV3029_STATUS_EEBUSY))
|
|
break;
|
|
usleep_range(1000, 10000);
|
|
}
|
|
if (i <= 0) {
|
|
dev_err(rv3029->dev, "EEPROM busy wait timeout.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rv3029_eeprom_exit(struct rv3029_data *rv3029)
|
|
{
|
|
/* Re-enable eeprom refresh */
|
|
return regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL,
|
|
RV3029_ONOFF_CTRL_EERE,
|
|
RV3029_ONOFF_CTRL_EERE);
|
|
}
|
|
|
|
static int rv3029_eeprom_enter(struct rv3029_data *rv3029)
|
|
{
|
|
unsigned int sr;
|
|
int ret;
|
|
|
|
/* Check whether we are in the allowed voltage range. */
|
|
ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (sr & RV3029_STATUS_VLOW2)
|
|
return -ENODEV;
|
|
if (sr & RV3029_STATUS_VLOW1) {
|
|
/* We clear the bits and retry once just in case
|
|
* we had a brown out in early startup.
|
|
*/
|
|
ret = regmap_update_bits(rv3029->regmap, RV3029_STATUS,
|
|
RV3029_STATUS_VLOW1, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(1000, 10000);
|
|
ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (sr & RV3029_STATUS_VLOW1) {
|
|
dev_err(rv3029->dev,
|
|
"Supply voltage is too low to safely access the EEPROM.\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/* Disable eeprom refresh. */
|
|
ret = regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL,
|
|
RV3029_ONOFF_CTRL_EERE, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Wait for any previous eeprom accesses to finish. */
|
|
ret = rv3029_eeprom_busywait(rv3029);
|
|
if (ret < 0)
|
|
rv3029_eeprom_exit(rv3029);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rv3029_eeprom_read(struct rv3029_data *rv3029, u8 reg,
|
|
u8 buf[], size_t len)
|
|
{
|
|
int ret, err;
|
|
|
|
err = rv3029_eeprom_enter(rv3029);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
ret = regmap_bulk_read(rv3029->regmap, reg, buf, len);
|
|
|
|
err = rv3029_eeprom_exit(rv3029);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rv3029_eeprom_write(struct rv3029_data *rv3029, u8 reg,
|
|
u8 const buf[], size_t len)
|
|
{
|
|
unsigned int tmp;
|
|
int ret, err;
|
|
size_t i;
|
|
|
|
err = rv3029_eeprom_enter(rv3029);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
for (i = 0; i < len; i++, reg++) {
|
|
ret = regmap_read(rv3029->regmap, reg, &tmp);
|
|
if (ret < 0)
|
|
break;
|
|
if (tmp != buf[i]) {
|
|
tmp = buf[i];
|
|
ret = regmap_write(rv3029->regmap, reg, tmp);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
ret = rv3029_eeprom_busywait(rv3029);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
|
|
err = rv3029_eeprom_exit(rv3029);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rv3029_eeprom_update_bits(struct rv3029_data *rv3029,
|
|
u8 reg, u8 mask, u8 set)
|
|
{
|
|
u8 buf;
|
|
int ret;
|
|
|
|
ret = rv3029_eeprom_read(rv3029, reg, &buf, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
buf &= ~mask;
|
|
buf |= set & mask;
|
|
ret = rv3029_eeprom_write(rv3029, reg, &buf, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t rv3029_handle_irq(int irq, void *dev_id)
|
|
{
|
|
struct device *dev = dev_id;
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
unsigned int flags, controls;
|
|
unsigned long events = 0;
|
|
int ret;
|
|
|
|
rtc_lock(rv3029->rtc);
|
|
|
|
ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls);
|
|
if (ret) {
|
|
dev_warn(dev, "Read IRQ Control Register error %d\n", ret);
|
|
rtc_unlock(rv3029->rtc);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags);
|
|
if (ret) {
|
|
dev_warn(dev, "Read IRQ Flags Register error %d\n", ret);
|
|
rtc_unlock(rv3029->rtc);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (flags & RV3029_IRQ_FLAGS_AF) {
|
|
flags &= ~RV3029_IRQ_FLAGS_AF;
|
|
controls &= ~RV3029_IRQ_CTRL_AIE;
|
|
events |= RTC_AF;
|
|
}
|
|
|
|
if (events) {
|
|
rtc_update_irq(rv3029->rtc, 1, events);
|
|
regmap_write(rv3029->regmap, RV3029_IRQ_FLAGS, flags);
|
|
regmap_write(rv3029->regmap, RV3029_IRQ_CTRL, controls);
|
|
}
|
|
rtc_unlock(rv3029->rtc);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int rv3029_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
unsigned int sr;
|
|
int ret;
|
|
u8 regs[RV3029_WATCH_SECTION_LEN] = { 0, };
|
|
|
|
ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON))
|
|
return -EINVAL;
|
|
|
|
ret = regmap_bulk_read(rv3029->regmap, RV3029_W_SEC, regs,
|
|
RV3029_WATCH_SECTION_LEN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
tm->tm_sec = bcd2bin(regs[RV3029_W_SEC - RV3029_W_SEC]);
|
|
tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES - RV3029_W_SEC]);
|
|
|
|
/* HR field has a more complex interpretation */
|
|
{
|
|
const u8 _hr = regs[RV3029_W_HOURS - RV3029_W_SEC];
|
|
|
|
if (_hr & RV3029_REG_HR_12_24) {
|
|
/* 12h format */
|
|
tm->tm_hour = bcd2bin(_hr & 0x1f);
|
|
if (_hr & RV3029_REG_HR_PM) /* PM flag set */
|
|
tm->tm_hour += 12;
|
|
} else /* 24h format */
|
|
tm->tm_hour = bcd2bin(_hr & 0x3f);
|
|
}
|
|
|
|
tm->tm_mday = bcd2bin(regs[RV3029_W_DATE - RV3029_W_SEC]);
|
|
tm->tm_mon = bcd2bin(regs[RV3029_W_MONTHS - RV3029_W_SEC]) - 1;
|
|
tm->tm_year = bcd2bin(regs[RV3029_W_YEARS - RV3029_W_SEC]) + 100;
|
|
tm->tm_wday = bcd2bin(regs[RV3029_W_DAYS - RV3029_W_SEC]) - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv3029_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
struct rtc_time *const tm = &alarm->time;
|
|
unsigned int controls, flags;
|
|
int ret;
|
|
u8 regs[8];
|
|
|
|
ret = regmap_bulk_read(rv3029->regmap, RV3029_A_SC, regs,
|
|
RV3029_ALARM_SECTION_LEN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
tm->tm_sec = bcd2bin(regs[RV3029_A_SC - RV3029_A_SC] & 0x7f);
|
|
tm->tm_min = bcd2bin(regs[RV3029_A_MN - RV3029_A_SC] & 0x7f);
|
|
tm->tm_hour = bcd2bin(regs[RV3029_A_HR - RV3029_A_SC] & 0x3f);
|
|
tm->tm_mday = bcd2bin(regs[RV3029_A_DT - RV3029_A_SC] & 0x3f);
|
|
tm->tm_mon = bcd2bin(regs[RV3029_A_MO - RV3029_A_SC] & 0x1f) - 1;
|
|
tm->tm_year = bcd2bin(regs[RV3029_A_YR - RV3029_A_SC] & 0x7f) + 100;
|
|
tm->tm_wday = bcd2bin(regs[RV3029_A_DW - RV3029_A_SC] & 0x07) - 1;
|
|
|
|
alarm->enabled = !!(controls & RV3029_IRQ_CTRL_AIE);
|
|
alarm->pending = (flags & RV3029_IRQ_FLAGS_AF) && alarm->enabled;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv3029_alarm_irq_enable(struct device *dev, unsigned int enable)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
|
|
return regmap_update_bits(rv3029->regmap, RV3029_IRQ_CTRL,
|
|
RV3029_IRQ_CTRL_AIE,
|
|
enable ? RV3029_IRQ_CTRL_AIE : 0);
|
|
}
|
|
|
|
static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
struct rtc_time *const tm = &alarm->time;
|
|
int ret;
|
|
u8 regs[8];
|
|
|
|
/* Activate all the alarms with AE_x bit */
|
|
regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec) | RV3029_A_AE_X;
|
|
regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min) | RV3029_A_AE_X;
|
|
regs[RV3029_A_HR - RV3029_A_SC] = (bin2bcd(tm->tm_hour) & 0x3f)
|
|
| RV3029_A_AE_X;
|
|
regs[RV3029_A_DT - RV3029_A_SC] = (bin2bcd(tm->tm_mday) & 0x3f)
|
|
| RV3029_A_AE_X;
|
|
regs[RV3029_A_MO - RV3029_A_SC] = (bin2bcd(tm->tm_mon + 1) & 0x1f)
|
|
| RV3029_A_AE_X;
|
|
regs[RV3029_A_DW - RV3029_A_SC] = (bin2bcd(tm->tm_wday + 1) & 0x7)
|
|
| RV3029_A_AE_X;
|
|
regs[RV3029_A_YR - RV3029_A_SC] = (bin2bcd(tm->tm_year - 100))
|
|
| RV3029_A_AE_X;
|
|
|
|
/* Write the alarm */
|
|
ret = regmap_bulk_write(rv3029->regmap, RV3029_A_SC, regs,
|
|
RV3029_ALARM_SECTION_LEN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return rv3029_alarm_irq_enable(dev, alarm->enabled);
|
|
}
|
|
|
|
static int rv3029_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
u8 regs[8];
|
|
int ret;
|
|
|
|
regs[RV3029_W_SEC - RV3029_W_SEC] = bin2bcd(tm->tm_sec);
|
|
regs[RV3029_W_MINUTES - RV3029_W_SEC] = bin2bcd(tm->tm_min);
|
|
regs[RV3029_W_HOURS - RV3029_W_SEC] = bin2bcd(tm->tm_hour);
|
|
regs[RV3029_W_DATE - RV3029_W_SEC] = bin2bcd(tm->tm_mday);
|
|
regs[RV3029_W_MONTHS - RV3029_W_SEC] = bin2bcd(tm->tm_mon + 1);
|
|
regs[RV3029_W_DAYS - RV3029_W_SEC] = bin2bcd(tm->tm_wday + 1) & 0x7;
|
|
regs[RV3029_W_YEARS - RV3029_W_SEC] = bin2bcd(tm->tm_year - 100);
|
|
|
|
ret = regmap_bulk_write(rv3029->regmap, RV3029_W_SEC, regs,
|
|
RV3029_WATCH_SECTION_LEN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* clear PON and VLOW2 bits */
|
|
return regmap_update_bits(rv3029->regmap, RV3029_STATUS,
|
|
RV3029_STATUS_PON | RV3029_STATUS_VLOW2, 0);
|
|
}
|
|
|
|
static int rv3029_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
unsigned long vl = 0;
|
|
int sr, ret = 0;
|
|
|
|
switch (cmd) {
|
|
case RTC_VL_READ:
|
|
ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (sr & RV3029_STATUS_VLOW1)
|
|
vl = RTC_VL_ACCURACY_LOW;
|
|
|
|
if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON))
|
|
vl |= RTC_VL_DATA_INVALID;
|
|
|
|
return put_user(vl, (unsigned int __user *)arg);
|
|
|
|
case RTC_VL_CLR:
|
|
return regmap_update_bits(rv3029->regmap, RV3029_STATUS,
|
|
RV3029_STATUS_VLOW1, 0);
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static int rv3029_nvram_write(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
return regmap_bulk_write(priv, RV3029_RAM_PAGE + offset, val, bytes);
|
|
}
|
|
|
|
static int rv3029_nvram_read(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
return regmap_bulk_read(priv, RV3029_RAM_PAGE + offset, val, bytes);
|
|
}
|
|
|
|
static const struct rv3029_trickle_tab_elem {
|
|
u32 r; /* resistance in ohms */
|
|
u8 conf; /* trickle config bits */
|
|
} rv3029_trickle_tab[] = {
|
|
{
|
|
.r = 1076,
|
|
.conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
|
|
RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
|
|
}, {
|
|
.r = 1091,
|
|
.conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
|
|
RV3029_TRICKLE_20K,
|
|
}, {
|
|
.r = 1137,
|
|
.conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
|
|
RV3029_TRICKLE_80K,
|
|
}, {
|
|
.r = 1154,
|
|
.conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K,
|
|
}, {
|
|
.r = 1371,
|
|
.conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_20K |
|
|
RV3029_TRICKLE_80K,
|
|
}, {
|
|
.r = 1395,
|
|
.conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_20K,
|
|
}, {
|
|
.r = 1472,
|
|
.conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_80K,
|
|
}, {
|
|
.r = 1500,
|
|
.conf = RV3029_TRICKLE_1K,
|
|
}, {
|
|
.r = 3810,
|
|
.conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_20K |
|
|
RV3029_TRICKLE_80K,
|
|
}, {
|
|
.r = 4000,
|
|
.conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_20K,
|
|
}, {
|
|
.r = 4706,
|
|
.conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_80K,
|
|
}, {
|
|
.r = 5000,
|
|
.conf = RV3029_TRICKLE_5K,
|
|
}, {
|
|
.r = 16000,
|
|
.conf = RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
|
|
}, {
|
|
.r = 20000,
|
|
.conf = RV3029_TRICKLE_20K,
|
|
}, {
|
|
.r = 80000,
|
|
.conf = RV3029_TRICKLE_80K,
|
|
},
|
|
};
|
|
|
|
static void rv3029_trickle_config(struct device *dev)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
struct device_node *of_node = dev->of_node;
|
|
const struct rv3029_trickle_tab_elem *elem;
|
|
int i, err;
|
|
u32 ohms;
|
|
u8 trickle_set_bits;
|
|
|
|
if (!of_node)
|
|
return;
|
|
|
|
/* Configure the trickle charger. */
|
|
err = of_property_read_u32(of_node, "trickle-resistor-ohms", &ohms);
|
|
if (err) {
|
|
/* Disable trickle charger. */
|
|
trickle_set_bits = 0;
|
|
} else {
|
|
/* Enable trickle charger. */
|
|
for (i = 0; i < ARRAY_SIZE(rv3029_trickle_tab); i++) {
|
|
elem = &rv3029_trickle_tab[i];
|
|
if (elem->r >= ohms)
|
|
break;
|
|
}
|
|
trickle_set_bits = elem->conf;
|
|
dev_info(dev,
|
|
"Trickle charger enabled at %d ohms resistance.\n",
|
|
elem->r);
|
|
}
|
|
err = rv3029_eeprom_update_bits(rv3029, RV3029_CONTROL_E2P_EECTRL,
|
|
RV3029_TRICKLE_MASK,
|
|
trickle_set_bits);
|
|
if (err < 0)
|
|
dev_err(dev, "Failed to update trickle charger config\n");
|
|
}
|
|
|
|
#ifdef CONFIG_RTC_DRV_RV3029_HWMON
|
|
|
|
static int rv3029_read_temp(struct rv3029_data *rv3029, int *temp_mC)
|
|
{
|
|
unsigned int temp;
|
|
int ret;
|
|
|
|
ret = regmap_read(rv3029->regmap, RV3029_TEMP_PAGE, &temp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*temp_mC = ((int)temp - 60) * 1000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t rv3029_hwmon_show_temp(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
int ret, temp_mC;
|
|
|
|
ret = rv3029_read_temp(rv3029, &temp_mC);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%d\n", temp_mC);
|
|
}
|
|
|
|
static ssize_t rv3029_hwmon_set_update_interval(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t count)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
unsigned int th_set_bits = 0;
|
|
unsigned long interval_ms;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 10, &interval_ms);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (interval_ms != 0) {
|
|
th_set_bits |= RV3029_EECTRL_THE;
|
|
if (interval_ms >= 16000)
|
|
th_set_bits |= RV3029_EECTRL_THP;
|
|
}
|
|
ret = rv3029_eeprom_update_bits(rv3029, RV3029_CONTROL_E2P_EECTRL,
|
|
RV3029_EECTRL_THE | RV3029_EECTRL_THP,
|
|
th_set_bits);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t rv3029_hwmon_show_update_interval(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
int ret, interval_ms;
|
|
u8 eectrl;
|
|
|
|
ret = rv3029_eeprom_read(rv3029, RV3029_CONTROL_E2P_EECTRL,
|
|
&eectrl, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (eectrl & RV3029_EECTRL_THE) {
|
|
if (eectrl & RV3029_EECTRL_THP)
|
|
interval_ms = 16000;
|
|
else
|
|
interval_ms = 1000;
|
|
} else {
|
|
interval_ms = 0;
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", interval_ms);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, rv3029_hwmon_show_temp,
|
|
NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO,
|
|
rv3029_hwmon_show_update_interval,
|
|
rv3029_hwmon_set_update_interval, 0);
|
|
|
|
static struct attribute *rv3029_hwmon_attrs[] = {
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_update_interval.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
ATTRIBUTE_GROUPS(rv3029_hwmon);
|
|
|
|
static void rv3029_hwmon_register(struct device *dev, const char *name)
|
|
{
|
|
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
|
|
struct device *hwmon_dev;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(dev, name, rv3029,
|
|
rv3029_hwmon_groups);
|
|
if (IS_ERR(hwmon_dev)) {
|
|
dev_warn(dev, "unable to register hwmon device %ld\n",
|
|
PTR_ERR(hwmon_dev));
|
|
}
|
|
}
|
|
|
|
#else /* CONFIG_RTC_DRV_RV3029_HWMON */
|
|
|
|
static void rv3029_hwmon_register(struct device *dev, const char *name)
|
|
{
|
|
}
|
|
|
|
#endif /* CONFIG_RTC_DRV_RV3029_HWMON */
|
|
|
|
static const struct rtc_class_ops rv3029_rtc_ops = {
|
|
.read_time = rv3029_read_time,
|
|
.set_time = rv3029_set_time,
|
|
.ioctl = rv3029_ioctl,
|
|
.read_alarm = rv3029_read_alarm,
|
|
.set_alarm = rv3029_set_alarm,
|
|
.alarm_irq_enable = rv3029_alarm_irq_enable,
|
|
};
|
|
|
|
static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq,
|
|
const char *name)
|
|
{
|
|
struct rv3029_data *rv3029;
|
|
struct nvmem_config nvmem_cfg = {
|
|
.name = "rv3029_nvram",
|
|
.word_size = 1,
|
|
.stride = 1,
|
|
.size = RV3029_RAM_SECTION_LEN,
|
|
.type = NVMEM_TYPE_BATTERY_BACKED,
|
|
.reg_read = rv3029_nvram_read,
|
|
.reg_write = rv3029_nvram_write,
|
|
};
|
|
int rc = 0;
|
|
|
|
rv3029 = devm_kzalloc(dev, sizeof(*rv3029), GFP_KERNEL);
|
|
if (!rv3029)
|
|
return -ENOMEM;
|
|
|
|
rv3029->regmap = regmap;
|
|
rv3029->irq = irq;
|
|
rv3029->dev = dev;
|
|
dev_set_drvdata(dev, rv3029);
|
|
|
|
rv3029_trickle_config(dev);
|
|
rv3029_hwmon_register(dev, name);
|
|
|
|
rv3029->rtc = devm_rtc_allocate_device(dev);
|
|
if (IS_ERR(rv3029->rtc))
|
|
return PTR_ERR(rv3029->rtc);
|
|
|
|
if (rv3029->irq > 0) {
|
|
rc = devm_request_threaded_irq(dev, rv3029->irq,
|
|
NULL, rv3029_handle_irq,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
"rv3029", dev);
|
|
if (rc) {
|
|
dev_warn(dev, "unable to request IRQ, alarms disabled\n");
|
|
rv3029->irq = 0;
|
|
}
|
|
}
|
|
if (!rv3029->irq)
|
|
clear_bit(RTC_FEATURE_ALARM, rv3029->rtc->features);
|
|
|
|
rv3029->rtc->ops = &rv3029_rtc_ops;
|
|
rv3029->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
|
|
rv3029->rtc->range_max = RTC_TIMESTAMP_END_2079;
|
|
|
|
rc = devm_rtc_register_device(rv3029->rtc);
|
|
if (rc)
|
|
return rc;
|
|
|
|
nvmem_cfg.priv = rv3029->regmap;
|
|
devm_rtc_nvmem_register(rv3029->rtc, &nvmem_cfg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_range rv3029_holes_range[] = {
|
|
regmap_reg_range(0x05, 0x07),
|
|
regmap_reg_range(0x0f, 0x0f),
|
|
regmap_reg_range(0x17, 0x17),
|
|
regmap_reg_range(0x1a, 0x1f),
|
|
regmap_reg_range(0x21, 0x27),
|
|
regmap_reg_range(0x34, 0x37),
|
|
};
|
|
|
|
static const struct regmap_access_table rv3029_regs = {
|
|
.no_ranges = rv3029_holes_range,
|
|
.n_no_ranges = ARRAY_SIZE(rv3029_holes_range),
|
|
};
|
|
|
|
static const struct regmap_config config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.rd_table = &rv3029_regs,
|
|
.wr_table = &rv3029_regs,
|
|
.max_register = 0x3f,
|
|
};
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int rv3029_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct regmap *regmap;
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
|
|
I2C_FUNC_SMBUS_BYTE)) {
|
|
dev_err(&client->dev, "Adapter does not support SMBUS_I2C_BLOCK or SMBUS_I2C_BYTE\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
regmap = devm_regmap_init_i2c(client, &config);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
return rv3029_probe(&client->dev, regmap, client->irq, client->name);
|
|
}
|
|
|
|
static const struct i2c_device_id rv3029_id[] = {
|
|
{ "rv3029", 0 },
|
|
{ "rv3029c2", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, rv3029_id);
|
|
|
|
static const __maybe_unused struct of_device_id rv3029_of_match[] = {
|
|
{ .compatible = "microcrystal,rv3029" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rv3029_of_match);
|
|
|
|
static struct i2c_driver rv3029_driver = {
|
|
.driver = {
|
|
.name = "rv3029",
|
|
.of_match_table = of_match_ptr(rv3029_of_match),
|
|
},
|
|
.probe = rv3029_i2c_probe,
|
|
.id_table = rv3029_id,
|
|
};
|
|
|
|
static int __init rv3029_register_driver(void)
|
|
{
|
|
return i2c_add_driver(&rv3029_driver);
|
|
}
|
|
|
|
static void rv3029_unregister_driver(void)
|
|
{
|
|
i2c_del_driver(&rv3029_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __init rv3029_register_driver(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void rv3029_unregister_driver(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_SPI_MASTER)
|
|
|
|
static int rv3049_probe(struct spi_device *spi)
|
|
{
|
|
struct regmap *regmap;
|
|
|
|
regmap = devm_regmap_init_spi(spi, &config);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
return rv3029_probe(&spi->dev, regmap, spi->irq, "rv3049");
|
|
}
|
|
|
|
static struct spi_driver rv3049_driver = {
|
|
.driver = {
|
|
.name = "rv3049",
|
|
},
|
|
.probe = rv3049_probe,
|
|
};
|
|
|
|
static int __init rv3049_register_driver(void)
|
|
{
|
|
return spi_register_driver(&rv3049_driver);
|
|
}
|
|
|
|
static void __exit rv3049_unregister_driver(void)
|
|
{
|
|
spi_unregister_driver(&rv3049_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __init rv3049_register_driver(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void __exit rv3049_unregister_driver(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static int __init rv30x9_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = rv3029_register_driver();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rv3049_register_driver();
|
|
if (ret)
|
|
rv3029_unregister_driver();
|
|
|
|
return ret;
|
|
}
|
|
module_init(rv30x9_init)
|
|
|
|
static void __exit rv30x9_exit(void)
|
|
{
|
|
rv3049_unregister_driver();
|
|
rv3029_unregister_driver();
|
|
}
|
|
module_exit(rv30x9_exit)
|
|
|
|
MODULE_AUTHOR("Gregory Hermant <gregory.hermant@calao-systems.com>");
|
|
MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
|
|
MODULE_DESCRIPTION("Micro Crystal RV3029/RV3049 RTC driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("spi:rv3049");
|