Changming Huang 9d4b827063 fsl/usb: Workarourd for USB erratum-A005697 ... The EHCI specification states the following in the SUSP bit description: In the Suspend state, the port is sensitive to resume detection. Note that the bit status does not change until the port is suspended and that there may be a delay in suspending a port if there is a transaction currently in progress on the USB. However, in NXP USBDR controller, the PORTSCx[SUSP] bit changes immediately when the application sets it and not when the port is actually suspended. So the application must wait for at least 10 milliseconds after a port indicates that it is suspended, to make sure this port has entered suspended state before initiating this port resume using the Force Port Resume bit. This bit is for NXP controller, not EHCI compatible. Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2016-12-05 15:13:58 +01:00
..
whci	whci: Remove deprecated create_singlethread_workqueue	2016-08-15 16:25:58 +02:00
bcma-hcd.c	USB: bcma: drop Northstar PHY 2.0 initialization code	2016-09-27 12:20:17 +02:00
ehci-atmel.c	usb: ehci-atmel: use __maybe_unused to hide pm functions	2016-03-03 20:37:41 -08:00
ehci-dbg.c	USB: EHCI: make all debugging depend on CONFIG_DYNAMIC_DEBUG	2016-04-29 15:31:30 -07:00
ehci-exynos.c	usb/host/: const data must use __initconst not __initdata	2016-04-28 12:35:36 -07:00
ehci-fsl.c	fsl/usb: Workarourd for USB erratum-A005697	2016-12-05 15:13:58 +01:00
ehci-fsl.h
ehci-grlib.c
ehci-hcd.c	USB: host: ehci-sead3: Remove SEAD-3 EHCI code	2016-10-05 01:31:20 +02:00
ehci-hub.c	fsl/usb: Workarourd for USB erratum-A005697	2016-12-05 15:13:58 +01:00
ehci-mem.c
ehci-msm.c	usb: host: ehci-msm: Conditionally call ehci suspend/resume	2016-06-07 22:15:25 -07:00
ehci-mv.c
ehci-mxc.c
ehci-omap.c	usb/host/: const data must use __initconst not __initdata	2016-04-28 12:35:36 -07:00
ehci-orion.c
ehci-pci.c	USB: EHCI: merge all cases that disable the IO watchdog	2016-10-24 14:36:25 +02:00
ehci-platform.c	usb: ehci-platform: increase EHCI_MAX_RSTS to 4	2016-10-24 14:29:08 +02:00
ehci-pmcmsp.c
ehci-ppc-of.c
ehci-ps3.c
ehci-q.c	usb: host: ehci: remove unnecessary max_packet() macro	2016-11-03 10:38:24 +02:00
ehci-sched.c	usb: host: ehci: remove unnecessary max_packet() macro	2016-11-03 10:38:24 +02:00
ehci-sh.c
ehci-spear.c	usb/host/: const data must use __initconst not __initdata	2016-04-28 12:35:36 -07:00
ehci-st.c	usb: host: ehci-st: Inform the reset framework that our reset line may be shared	2016-06-30 07:44:21 +01:00
ehci-sysfs.c
ehci-tegra.c	usb: host: ehci-tegra: Avoid getting the same reset twice	2016-06-07 22:15:25 -07:00
ehci-tilegx.c
ehci-timer.c	USB: EHCI: add a delay when unlinking an active QH	2016-02-03 13:14:52 -08:00
ehci-w90x900.c	USB: EHCI: ehci-w90x900: remove unuseful functions	2016-11-29 17:36:43 +01:00
ehci-xilinx-of.c
ehci.h	fsl/usb: Workarourd for USB erratum-A005697	2016-12-05 15:13:58 +01:00
fhci-dbg.c
fhci-hcd.c	usb: host: fhci-hcd: don't print on ENOMEM	2016-08-30 19:17:37 +02:00
fhci-hub.c	QE: Move QE from arch/powerpc to drivers/soc	2015-12-22 17:12:56 -06:00
fhci-mem.c
fhci-q.c
fhci-sched.c	USB: FHCI: avoid redundant condition	2016-05-09 13:08:46 +02:00
fhci-tds.c	usb: whci: fhci: remove comparison to bool	2015-12-04 08:25:58 -08:00
fhci.h	QE: Move QE from arch/powerpc to drivers/soc	2015-12-22 17:12:56 -06:00
fotg210-hcd.c	usb/host/fotg210: remove dead code in create_sysfs_files	2016-05-09 13:08:46 +02:00
fotg210.h
fsl-mph-dr-of.c	fsl/usb: Workarourd for USB erratum-A005697	2016-12-05 15:13:58 +01:00
hwa-hc.c
imx21-dbg.c
imx21-hcd.c
imx21-hcd.h
isp116x-hcd.c
isp116x.h
isp1362-hcd.c	usb: Convert pr_warning to pr_warn	2016-11-03 10:38:36 +02:00
isp1362.h
Kconfig	USB: OHCI: make ohci-da8xx a separate driver	2016-10-27 16:59:59 +02:00
Makefile	USB: OHCI: make ohci-da8xx a separate driver	2016-10-27 16:59:59 +02:00
max3421-hcd.c	usb: host: max3421-hcd: don't print on ENOMEM	2016-08-30 19:17:37 +02:00
ohci-at91.c	Merge 4.9-rc3 into usb-next	2016-10-30 06:40:39 -04:00
ohci-da8xx.c	USB: ohci: da8xx: Resume the entire host controller	2016-11-29 17:31:36 +01:00
ohci-dbg.c
ohci-exynos.c
ohci-hcd.c	Merge 4.9-rc3 into usb-next	2016-10-30 06:40:39 -04:00
ohci-hub.c
ohci-mem.c	USB: OHCI: use dma_pool_zalloc	2016-11-21 17:33:40 +01:00
ohci-nxp.c	usb: ohci: nxp: remove USB PLL and USB OTG clock management	2016-03-03 20:38:53 -08:00
ohci-omap.c	USB: ohci-omap - avoid including mach/irqs.h	2016-08-30 19:31:33 +02:00
ohci-omap3.c
ohci-pci.c
ohci-platform.c	ohci-platform: Add support for controllers with multiple reset lines	2016-06-07 22:21:41 -07:00
ohci-ppc-of.c
ohci-ps3.c
ohci-pxa27x.c	usb: host: ohci-pxa27x: propagate the irq error code	2016-02-14 17:06:43 -08:00
ohci-q.c	USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails	2016-06-07 22:15:25 -07:00
ohci-s3c2410.c	usb: ohci: s3c2410: allow probing from device tree	2016-11-29 17:31:36 +01:00
ohci-sa1111.c	usb: ohci-sa1111: remove mach/hardware.h include	2016-08-30 19:24:59 +02:00
ohci-sm501.c
ohci-spear.c
ohci-st.c	usb: host: ohci-st: Inform the reset framework that our reset line may be shared	2016-06-30 07:44:20 +01:00
ohci-tilegx.c
ohci-tmio.c
ohci.h	usb: host: unhide suspend/resume declarations	2016-03-03 20:37:41 -08:00
oxu210hp-hcd.c	usb: host: oxu210hp-hcd: use list_for_each_entry_safe	2016-01-24 20:55:33 -08:00
oxu210hp.h
pci-quirks.c	drivers/usb: Skip auto handoff for TI and RENESAS usb controllers	2016-11-07 10:12:22 +01:00
pci-quirks.h
r8a66597-hcd.c	usb: r8a66597: add locking to r8a66597_check_detect_child	2016-02-06 21:55:57 -08:00
r8a66597.h
sl811-hcd.c
sl811.h
sl811_cs.c
ssb-hcd.c
u132-hcd.c	usb: host: u132-hcd: use list_for_each_entry	2016-01-24 20:55:33 -08:00
uhci-debug.c	new helpers: no_seek_end_llseek{,_size}()	2015-12-23 10:41:31 -05:00
uhci-grlib.c
uhci-hcd.c	usb: host: uhci-hcd: don't print on ENOMEM	2016-08-30 19:17:37 +02:00
uhci-hcd.h
uhci-hub.c
uhci-pci.c
uhci-platform.c
uhci-q.c
xhci-dbg.c
xhci-ext-caps.h	xhci: harden xhci_find_next_ext_cap against device removal	2016-02-04 17:00:10 -08:00
xhci-hub.c	xhci: use default USB_RESUME_TIMEOUT when resuming ports.	2016-10-20 17:54:55 +02:00
xhci-mem.c	usb: patches for v4.10 merge window	2016-11-18 16:02:15 +01:00
xhci-mtk-sch.c	usb: host: xhci: purge GET_MAX_PACKET()	2016-11-03 10:38:22 +02:00
xhci-mtk.c	usb: xhci-mtk: make IPPC register optional	2016-10-27 17:02:41 +02:00
xhci-mtk.h	usb: xhci-mtk: make IPPC register optional	2016-10-27 17:02:41 +02:00
xhci-mvebu.c	usb: host: xhci: plat: change type of mvebu init_quirk()	2016-04-26 16:08:02 -07:00
xhci-mvebu.h	usb: host: xhci: plat: change type of mvebu init_quirk()	2016-04-26 16:08:02 -07:00
xhci-pci.c	xhci: workaround for hosts missing CAS bit	2016-10-20 17:54:55 +02:00
xhci-plat.c	usb: host: xhci: plat: add support for Renesas r8a7796 SoC	2016-11-14 10:18:22 +01:00
xhci-plat.h	usb: host: xhci: plat: finally get rid of xhci_plat_type_is()	2016-04-26 16:08:02 -07:00
xhci-rcar.c	usb: host: xhci: plat: add support for Renesas r8a7796 SoC	2016-11-14 10:18:22 +01:00
xhci-rcar.h	usb: host: xhci: rcar: add a new firmware version for r8a7796	2016-11-14 10:18:22 +01:00
xhci-ring.c	usb: patches for v4.10 merge window	2016-11-18 16:02:15 +01:00
xhci-tegra.c	usb: host: xhci-tegra: Fix error return code in tegra_xusb_probe()	2016-09-13 17:24:24 +02:00
xhci-trace.c
xhci-trace.h
xhci.c	usb: patches for v4.10 merge window	2016-11-18 16:02:15 +01:00
xhci.h	usb: patches for v4.10 merge window	2016-11-18 16:02:15 +01:00