linux-stable/include/dt-bindings/phy/phy-qcom-qusb2.h
Manu Gautam a8b70ccf10 dt-bindings: phy-qcom-usb2: Add support to override tuning values
To improve eye diagram for PHYs on different boards of same SOC,
some parameters may need to be changed. Provide device tree
properties to override these from board specific device tree
files. While at it, replace "qcom,qusb2-v2-phy" with compatible
string for USB2 PHY on sdm845 which was earlier added for
sdm845 only.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-05-20 21:51:31 +05:30

37 lines
1.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
#ifndef _DT_BINDINGS_QCOM_PHY_QUSB2_H_
#define _DT_BINDINGS_QCOM_PHY_QUSB2_H_
/* PHY HSTX TRIM bit values (24mA to 15mA) */
#define QUSB2_V2_HSTX_TRIM_24_0_MA 0x0
#define QUSB2_V2_HSTX_TRIM_23_4_MA 0x1
#define QUSB2_V2_HSTX_TRIM_22_8_MA 0x2
#define QUSB2_V2_HSTX_TRIM_22_2_MA 0x3
#define QUSB2_V2_HSTX_TRIM_21_6_MA 0x4
#define QUSB2_V2_HSTX_TRIM_21_0_MA 0x5
#define QUSB2_V2_HSTX_TRIM_20_4_MA 0x6
#define QUSB2_V2_HSTX_TRIM_19_8_MA 0x7
#define QUSB2_V2_HSTX_TRIM_19_2_MA 0x8
#define QUSB2_V2_HSTX_TRIM_18_6_MA 0x9
#define QUSB2_V2_HSTX_TRIM_18_0_MA 0xa
#define QUSB2_V2_HSTX_TRIM_17_4_MA 0xb
#define QUSB2_V2_HSTX_TRIM_16_8_MA 0xc
#define QUSB2_V2_HSTX_TRIM_16_2_MA 0xd
#define QUSB2_V2_HSTX_TRIM_15_6_MA 0xe
#define QUSB2_V2_HSTX_TRIM_15_0_MA 0xf
/* PHY PREEMPHASIS bit values */
#define QUSB2_V2_PREEMPHASIS_NONE 0
#define QUSB2_V2_PREEMPHASIS_5_PERCENT 1
#define QUSB2_V2_PREEMPHASIS_10_PERCENT 2
#define QUSB2_V2_PREEMPHASIS_15_PERCENT 3
/* PHY PREEMPHASIS-WIDTH bit values */
#define QUSB2_V2_PREEMPHASIS_WIDTH_FULL_BIT 0
#define QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT 1
#endif