linux-stable/kernel/time/hrtimer.c
Arnd Bergmann 9afc5eee65 y2038: globally rename compat_time to old_time32
Christoph Hellwig suggested a slightly different path for handling
backwards compatibility with the 32-bit time_t based system calls:

Rather than simply reusing the compat_sys_* entry points on 32-bit
architectures unchanged, we get rid of those entry points and the
compat_time types by renaming them to something that makes more sense
on 32-bit architectures (which don't have a compat mode otherwise),
and then share the entry points under the new name with the 64-bit
architectures that use them for implementing the compatibility.

The following types and interfaces are renamed here, and moved
from linux/compat_time.h to linux/time32.h:

old				new
---				---
compat_time_t			old_time32_t
struct compat_timeval		struct old_timeval32
struct compat_timespec		struct old_timespec32
struct compat_itimerspec	struct old_itimerspec32
ns_to_compat_timeval()		ns_to_old_timeval32()
get_compat_itimerspec64()	get_old_itimerspec32()
put_compat_itimerspec64()	put_old_itimerspec32()
compat_get_timespec64()		get_old_timespec32()
compat_put_timespec64()		put_old_timespec32()

As we already have aliases in place, this patch addresses only the
instances that are relevant to the system call interface in particular,
not those that occur in device drivers and other modules. Those
will get handled separately, while providing the 64-bit version
of the respective interfaces.

I'm not renaming the timex, rusage and itimerval structures, as we are
still debating what the new interface will look like, and whether we
will need a replacement at all.

This also doesn't change the names of the syscall entry points, which can
be done more easily when we actually switch over the 32-bit architectures
to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to
SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-27 14:48:48 +02:00

2028 lines
54 KiB
C

/*
* linux/kernel/hrtimer.c
*
* Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
* Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
* Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner
*
* High-resolution kernel timers
*
* In contrast to the low-resolution timeout API implemented in
* kernel/timer.c, hrtimers provide finer resolution and accuracy
* depending on system configuration and capabilities.
*
* These timers are currently used for:
* - itimers
* - POSIX timers
* - nanosleep
* - precise in-kernel timing
*
* Started by: Thomas Gleixner and Ingo Molnar
*
* Credits:
* based on kernel/timer.c
*
* Help, testing, suggestions, bugfixes, improvements were
* provided by:
*
* George Anzinger, Andrew Morton, Steven Rostedt, Roman Zippel
* et. al.
*
* For licencing details see kernel-base/COPYING
*/
#include <linux/cpu.h>
#include <linux/export.h>
#include <linux/percpu.h>
#include <linux/hrtimer.h>
#include <linux/notifier.h>
#include <linux/syscalls.h>
#include <linux/interrupt.h>
#include <linux/tick.h>
#include <linux/seq_file.h>
#include <linux/err.h>
#include <linux/debugobjects.h>
#include <linux/sched/signal.h>
#include <linux/sched/sysctl.h>
#include <linux/sched/rt.h>
#include <linux/sched/deadline.h>
#include <linux/sched/nohz.h>
#include <linux/sched/debug.h>
#include <linux/timer.h>
#include <linux/freezer.h>
#include <linux/compat.h>
#include <linux/uaccess.h>
#include <trace/events/timer.h>
#include "tick-internal.h"
/*
* Masks for selecting the soft and hard context timers from
* cpu_base->active
*/
#define MASK_SHIFT (HRTIMER_BASE_MONOTONIC_SOFT)
#define HRTIMER_ACTIVE_HARD ((1U << MASK_SHIFT) - 1)
#define HRTIMER_ACTIVE_SOFT (HRTIMER_ACTIVE_HARD << MASK_SHIFT)
#define HRTIMER_ACTIVE_ALL (HRTIMER_ACTIVE_SOFT | HRTIMER_ACTIVE_HARD)
/*
* The timer bases:
*
* There are more clockids than hrtimer bases. Thus, we index
* into the timer bases by the hrtimer_base_type enum. When trying
* to reach a base using a clockid, hrtimer_clockid_to_base()
* is used to convert from clockid to the proper hrtimer_base_type.
*/
DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
{
.lock = __RAW_SPIN_LOCK_UNLOCKED(hrtimer_bases.lock),
.clock_base =
{
{
.index = HRTIMER_BASE_MONOTONIC,
.clockid = CLOCK_MONOTONIC,
.get_time = &ktime_get,
},
{
.index = HRTIMER_BASE_REALTIME,
.clockid = CLOCK_REALTIME,
.get_time = &ktime_get_real,
},
{
.index = HRTIMER_BASE_BOOTTIME,
.clockid = CLOCK_BOOTTIME,
.get_time = &ktime_get_boottime,
},
{
.index = HRTIMER_BASE_TAI,
.clockid = CLOCK_TAI,
.get_time = &ktime_get_clocktai,
},
{
.index = HRTIMER_BASE_MONOTONIC_SOFT,
.clockid = CLOCK_MONOTONIC,
.get_time = &ktime_get,
},
{
.index = HRTIMER_BASE_REALTIME_SOFT,
.clockid = CLOCK_REALTIME,
.get_time = &ktime_get_real,
},
{
.index = HRTIMER_BASE_BOOTTIME_SOFT,
.clockid = CLOCK_BOOTTIME,
.get_time = &ktime_get_boottime,
},
{
.index = HRTIMER_BASE_TAI_SOFT,
.clockid = CLOCK_TAI,
.get_time = &ktime_get_clocktai,
},
}
};
static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
/* Make sure we catch unsupported clockids */
[0 ... MAX_CLOCKS - 1] = HRTIMER_MAX_CLOCK_BASES,
[CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
[CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC,
[CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME,
[CLOCK_TAI] = HRTIMER_BASE_TAI,
};
/*
* Functions and macros which are different for UP/SMP systems are kept in a
* single place
*/
#ifdef CONFIG_SMP
/*
* We require the migration_base for lock_hrtimer_base()/switch_hrtimer_base()
* such that hrtimer_callback_running() can unconditionally dereference
* timer->base->cpu_base
*/
static struct hrtimer_cpu_base migration_cpu_base = {
.clock_base = { { .cpu_base = &migration_cpu_base, }, },
};
#define migration_base migration_cpu_base.clock_base[0]
/*
* We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock
* means that all timers which are tied to this base via timer->base are
* locked, and the base itself is locked too.
*
* So __run_timers/migrate_timers can safely modify all timers which could
* be found on the lists/queues.
*
* When the timer's base is locked, and the timer removed from list, it is
* possible to set timer->base = &migration_base and drop the lock: the timer
* remains locked.
*/
static
struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
unsigned long *flags)
{
struct hrtimer_clock_base *base;
for (;;) {
base = timer->base;
if (likely(base != &migration_base)) {
raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
if (likely(base == timer->base))
return base;
/* The timer has migrated to another CPU: */
raw_spin_unlock_irqrestore(&base->cpu_base->lock, *flags);
}
cpu_relax();
}
}
/*
* We do not migrate the timer when it is expiring before the next
* event on the target cpu. When high resolution is enabled, we cannot
* reprogram the target cpu hardware and we would cause it to fire
* late. To keep it simple, we handle the high resolution enabled and
* disabled case similar.
*
* Called with cpu_base->lock of target cpu held.
*/
static int
hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
{
ktime_t expires;
expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
return expires < new_base->cpu_base->expires_next;
}
static inline
struct hrtimer_cpu_base *get_target_base(struct hrtimer_cpu_base *base,
int pinned)
{
#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
if (static_branch_likely(&timers_migration_enabled) && !pinned)
return &per_cpu(hrtimer_bases, get_nohz_timer_target());
#endif
return base;
}
/*
* We switch the timer base to a power-optimized selected CPU target,
* if:
* - NO_HZ_COMMON is enabled
* - timer migration is enabled
* - the timer callback is not running
* - the timer is not the first expiring timer on the new target
*
* If one of the above requirements is not fulfilled we move the timer
* to the current CPU or leave it on the previously assigned CPU if
* the timer callback is currently running.
*/
static inline struct hrtimer_clock_base *
switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
int pinned)
{
struct hrtimer_cpu_base *new_cpu_base, *this_cpu_base;
struct hrtimer_clock_base *new_base;
int basenum = base->index;
this_cpu_base = this_cpu_ptr(&hrtimer_bases);
new_cpu_base = get_target_base(this_cpu_base, pinned);
again:
new_base = &new_cpu_base->clock_base[basenum];
if (base != new_base) {
/*
* We are trying to move timer to new_base.
* However we can't change timer's base while it is running,
* so we keep it on the same CPU. No hassle vs. reprogramming
* the event source in the high resolution case. The softirq
* code will take care of this when the timer function has
* completed. There is no conflict as we hold the lock until
* the timer is enqueued.
*/
if (unlikely(hrtimer_callback_running(timer)))
return base;
/* See the comment in lock_hrtimer_base() */
timer->base = &migration_base;
raw_spin_unlock(&base->cpu_base->lock);
raw_spin_lock(&new_base->cpu_base->lock);
if (new_cpu_base != this_cpu_base &&
hrtimer_check_target(timer, new_base)) {
raw_spin_unlock(&new_base->cpu_base->lock);
raw_spin_lock(&base->cpu_base->lock);
new_cpu_base = this_cpu_base;
timer->base = base;
goto again;
}
timer->base = new_base;
} else {
if (new_cpu_base != this_cpu_base &&
hrtimer_check_target(timer, new_base)) {
new_cpu_base = this_cpu_base;
goto again;
}
}
return new_base;
}
#else /* CONFIG_SMP */
static inline struct hrtimer_clock_base *
lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
{
struct hrtimer_clock_base *base = timer->base;
raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
return base;
}
# define switch_hrtimer_base(t, b, p) (b)
#endif /* !CONFIG_SMP */
/*
* Functions for the union type storage format of ktime_t which are
* too large for inlining:
*/
#if BITS_PER_LONG < 64
/*
* Divide a ktime value by a nanosecond value
*/
s64 __ktime_divns(const ktime_t kt, s64 div)
{
int sft = 0;
s64 dclc;
u64 tmp;
dclc = ktime_to_ns(kt);
tmp = dclc < 0 ? -dclc : dclc;
/* Make sure the divisor is less than 2^32: */
while (div >> 32) {
sft++;
div >>= 1;
}
tmp >>= sft;
do_div(tmp, (unsigned long) div);
return dclc < 0 ? -tmp : tmp;
}
EXPORT_SYMBOL_GPL(__ktime_divns);
#endif /* BITS_PER_LONG >= 64 */
/*
* Add two ktime values and do a safety check for overflow:
*/
ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs)
{
ktime_t res = ktime_add_unsafe(lhs, rhs);
/*
* We use KTIME_SEC_MAX here, the maximum timeout which we can
* return to user space in a timespec:
*/
if (res < 0 || res < lhs || res < rhs)
res = ktime_set(KTIME_SEC_MAX, 0);
return res;
}
EXPORT_SYMBOL_GPL(ktime_add_safe);
#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
static struct debug_obj_descr hrtimer_debug_descr;
static void *hrtimer_debug_hint(void *addr)
{
return ((struct hrtimer *) addr)->function;
}
/*
* fixup_init is called when:
* - an active object is initialized
*/
static bool hrtimer_fixup_init(void *addr, enum debug_obj_state state)
{
struct hrtimer *timer = addr;
switch (state) {
case ODEBUG_STATE_ACTIVE:
hrtimer_cancel(timer);
debug_object_init(timer, &hrtimer_debug_descr);
return true;
default:
return false;
}
}
/*
* fixup_activate is called when:
* - an active object is activated
* - an unknown non-static object is activated
*/
static bool hrtimer_fixup_activate(void *addr, enum debug_obj_state state)
{
switch (state) {
case ODEBUG_STATE_ACTIVE:
WARN_ON(1);
default:
return false;
}
}
/*
* fixup_free is called when:
* - an active object is freed
*/
static bool hrtimer_fixup_free(void *addr, enum debug_obj_state state)
{
struct hrtimer *timer = addr;
switch (state) {
case ODEBUG_STATE_ACTIVE:
hrtimer_cancel(timer);
debug_object_free(timer, &hrtimer_debug_descr);
return true;
default:
return false;
}
}
static struct debug_obj_descr hrtimer_debug_descr = {
.name = "hrtimer",
.debug_hint = hrtimer_debug_hint,
.fixup_init = hrtimer_fixup_init,
.fixup_activate = hrtimer_fixup_activate,
.fixup_free = hrtimer_fixup_free,
};
static inline void debug_hrtimer_init(struct hrtimer *timer)
{
debug_object_init(timer, &hrtimer_debug_descr);
}
static inline void debug_hrtimer_activate(struct hrtimer *timer,
enum hrtimer_mode mode)
{
debug_object_activate(timer, &hrtimer_debug_descr);
}
static inline void debug_hrtimer_deactivate(struct hrtimer *timer)
{
debug_object_deactivate(timer, &hrtimer_debug_descr);
}
static inline void debug_hrtimer_free(struct hrtimer *timer)
{
debug_object_free(timer, &hrtimer_debug_descr);
}
static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
enum hrtimer_mode mode);
void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t clock_id,
enum hrtimer_mode mode)
{
debug_object_init_on_stack(timer, &hrtimer_debug_descr);
__hrtimer_init(timer, clock_id, mode);
}
EXPORT_SYMBOL_GPL(hrtimer_init_on_stack);
void destroy_hrtimer_on_stack(struct hrtimer *timer)
{
debug_object_free(timer, &hrtimer_debug_descr);
}
EXPORT_SYMBOL_GPL(destroy_hrtimer_on_stack);
#else
static inline void debug_hrtimer_init(struct hrtimer *timer) { }
static inline void debug_hrtimer_activate(struct hrtimer *timer,
enum hrtimer_mode mode) { }
static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { }
#endif
static inline void
debug_init(struct hrtimer *timer, clockid_t clockid,
enum hrtimer_mode mode)
{
debug_hrtimer_init(timer);
trace_hrtimer_init(timer, clockid, mode);
}
static inline void debug_activate(struct hrtimer *timer,
enum hrtimer_mode mode)
{
debug_hrtimer_activate(timer, mode);
trace_hrtimer_start(timer, mode);
}
static inline void debug_deactivate(struct hrtimer *timer)
{
debug_hrtimer_deactivate(timer);
trace_hrtimer_cancel(timer);
}
static struct hrtimer_clock_base *
__next_base(struct hrtimer_cpu_base *cpu_base, unsigned int *active)
{
unsigned int idx;
if (!*active)
return NULL;
idx = __ffs(*active);
*active &= ~(1U << idx);
return &cpu_base->clock_base[idx];
}
#define for_each_active_base(base, cpu_base, active) \
while ((base = __next_base((cpu_base), &(active))))
static ktime_t __hrtimer_next_event_base(struct hrtimer_cpu_base *cpu_base,
const struct hrtimer *exclude,
unsigned int active,
ktime_t expires_next)
{
struct hrtimer_clock_base *base;
ktime_t expires;
for_each_active_base(base, cpu_base, active) {
struct timerqueue_node *next;
struct hrtimer *timer;
next = timerqueue_getnext(&base->active);
timer = container_of(next, struct hrtimer, node);
if (timer == exclude) {
/* Get to the next timer in the queue. */
next = timerqueue_iterate_next(next);
if (!next)
continue;
timer = container_of(next, struct hrtimer, node);
}
expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
if (expires < expires_next) {
expires_next = expires;
/* Skip cpu_base update if a timer is being excluded. */
if (exclude)
continue;
if (timer->is_soft)
cpu_base->softirq_next_timer = timer;
else
cpu_base->next_timer = timer;
}
}
/*
* clock_was_set() might have changed base->offset of any of
* the clock bases so the result might be negative. Fix it up
* to prevent a false positive in clockevents_program_event().
*/
if (expires_next < 0)
expires_next = 0;
return expires_next;
}
/*
* Recomputes cpu_base::*next_timer and returns the earliest expires_next but
* does not set cpu_base::*expires_next, that is done by hrtimer_reprogram.
*
* When a softirq is pending, we can ignore the HRTIMER_ACTIVE_SOFT bases,
* those timers will get run whenever the softirq gets handled, at the end of
* hrtimer_run_softirq(), hrtimer_update_softirq_timer() will re-add these bases.
*
* Therefore softirq values are those from the HRTIMER_ACTIVE_SOFT clock bases.
* The !softirq values are the minima across HRTIMER_ACTIVE_ALL, unless an actual
* softirq is pending, in which case they're the minima of HRTIMER_ACTIVE_HARD.
*
* @active_mask must be one of:
* - HRTIMER_ACTIVE_ALL,
* - HRTIMER_ACTIVE_SOFT, or
* - HRTIMER_ACTIVE_HARD.
*/
static ktime_t
__hrtimer_get_next_event(struct hrtimer_cpu_base *cpu_base, unsigned int active_mask)
{
unsigned int active;
struct hrtimer *next_timer = NULL;
ktime_t expires_next = KTIME_MAX;
if (!cpu_base->softirq_activated && (active_mask & HRTIMER_ACTIVE_SOFT)) {
active = cpu_base->active_bases & HRTIMER_ACTIVE_SOFT;
cpu_base->softirq_next_timer = NULL;
expires_next = __hrtimer_next_event_base(cpu_base, NULL,
active, KTIME_MAX);
next_timer = cpu_base->softirq_next_timer;
}
if (active_mask & HRTIMER_ACTIVE_HARD) {
active = cpu_base->active_bases & HRTIMER_ACTIVE_HARD;
cpu_base->next_timer = next_timer;
expires_next = __hrtimer_next_event_base(cpu_base, NULL, active,
expires_next);
}
return expires_next;
}
static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
{
ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset;
ktime_t now = ktime_get_update_offsets_now(&base->clock_was_set_seq,
offs_real, offs_boot, offs_tai);
base->clock_base[HRTIMER_BASE_REALTIME_SOFT].offset = *offs_real;
base->clock_base[HRTIMER_BASE_BOOTTIME_SOFT].offset = *offs_boot;
base->clock_base[HRTIMER_BASE_TAI_SOFT].offset = *offs_tai;
return now;
}
/*
* Is the high resolution mode active ?
*/
static inline int __hrtimer_hres_active(struct hrtimer_cpu_base *cpu_base)
{
return IS_ENABLED(CONFIG_HIGH_RES_TIMERS) ?
cpu_base->hres_active : 0;
}
static inline int hrtimer_hres_active(void)
{
return __hrtimer_hres_active(this_cpu_ptr(&hrtimer_bases));
}
/*
* Reprogram the event source with checking both queues for the
* next event
* Called with interrupts disabled and base->lock held
*/
static void
hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
{
ktime_t expires_next;
/*
* Find the current next expiration time.
*/
expires_next = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_ALL);
if (cpu_base->next_timer && cpu_base->next_timer->is_soft) {
/*
* When the softirq is activated, hrtimer has to be
* programmed with the first hard hrtimer because soft
* timer interrupt could occur too late.
*/
if (cpu_base->softirq_activated)
expires_next = __hrtimer_get_next_event(cpu_base,
HRTIMER_ACTIVE_HARD);
else
cpu_base->softirq_expires_next = expires_next;
}
if (skip_equal && expires_next == cpu_base->expires_next)
return;
cpu_base->expires_next = expires_next;
/*
* If hres is not active, hardware does not have to be
* reprogrammed yet.
*
* If a hang was detected in the last timer interrupt then we
* leave the hang delay active in the hardware. We want the
* system to make progress. That also prevents the following
* scenario:
* T1 expires 50ms from now
* T2 expires 5s from now
*
* T1 is removed, so this code is called and would reprogram
* the hardware to 5s from now. Any hrtimer_start after that
* will not reprogram the hardware due to hang_detected being
* set. So we'd effectivly block all timers until the T2 event
* fires.
*/
if (!__hrtimer_hres_active(cpu_base) || cpu_base->hang_detected)
return;
tick_program_event(cpu_base->expires_next, 1);
}
/* High resolution timer related functions */
#ifdef CONFIG_HIGH_RES_TIMERS
/*
* High resolution timer enabled ?
*/
static bool hrtimer_hres_enabled __read_mostly = true;
unsigned int hrtimer_resolution __read_mostly = LOW_RES_NSEC;
EXPORT_SYMBOL_GPL(hrtimer_resolution);
/*
* Enable / Disable high resolution mode
*/
static int __init setup_hrtimer_hres(char *str)
{
return (kstrtobool(str, &hrtimer_hres_enabled) == 0);
}
__setup("highres=", setup_hrtimer_hres);
/*
* hrtimer_high_res_enabled - query, if the highres mode is enabled
*/
static inline int hrtimer_is_hres_enabled(void)
{
return hrtimer_hres_enabled;
}
/*
* Retrigger next event is called after clock was set
*
* Called with interrupts disabled via on_each_cpu()
*/
static void retrigger_next_event(void *arg)
{
struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases);
if (!__hrtimer_hres_active(base))
return;
raw_spin_lock(&base->lock);
hrtimer_update_base(base);
hrtimer_force_reprogram(base, 0);
raw_spin_unlock(&base->lock);
}
/*
* Switch to high resolution mode
*/
static void hrtimer_switch_to_hres(void)
{
struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases);
if (tick_init_highres()) {
pr_warn("Could not switch to high resolution mode on CPU %u\n",
base->cpu);
return;
}
base->hres_active = 1;
hrtimer_resolution = HIGH_RES_NSEC;
tick_setup_sched_timer();
/* "Retrigger" the interrupt to get things going */
retrigger_next_event(NULL);
}
static void clock_was_set_work(struct work_struct *work)
{
clock_was_set();
}
static DECLARE_WORK(hrtimer_work, clock_was_set_work);
/*
* Called from timekeeping and resume code to reprogram the hrtimer
* interrupt device on all cpus.
*/
void clock_was_set_delayed(void)
{
schedule_work(&hrtimer_work);
}
#else
static inline int hrtimer_is_hres_enabled(void) { return 0; }
static inline void hrtimer_switch_to_hres(void) { }
static inline void retrigger_next_event(void *arg) { }
#endif /* CONFIG_HIGH_RES_TIMERS */
/*
* When a timer is enqueued and expires earlier than the already enqueued
* timers, we have to check, whether it expires earlier than the timer for
* which the clock event device was armed.
*
* Called with interrupts disabled and base->cpu_base.lock held
*/
static void hrtimer_reprogram(struct hrtimer *timer, bool reprogram)
{
struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
struct hrtimer_clock_base *base = timer->base;
ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
/*
* CLOCK_REALTIME timer might be requested with an absolute
* expiry time which is less than base->offset. Set it to 0.
*/
if (expires < 0)
expires = 0;
if (timer->is_soft) {
/*
* soft hrtimer could be started on a remote CPU. In this
* case softirq_expires_next needs to be updated on the
* remote CPU. The soft hrtimer will not expire before the
* first hard hrtimer on the remote CPU -
* hrtimer_check_target() prevents this case.
*/
struct hrtimer_cpu_base *timer_cpu_base = base->cpu_base;
if (timer_cpu_base->softirq_activated)
return;
if (!ktime_before(expires, timer_cpu_base->softirq_expires_next))
return;
timer_cpu_base->softirq_next_timer = timer;
timer_cpu_base->softirq_expires_next = expires;
if (!ktime_before(expires, timer_cpu_base->expires_next) ||
!reprogram)
return;
}
/*
* If the timer is not on the current cpu, we cannot reprogram
* the other cpus clock event device.
*/
if (base->cpu_base != cpu_base)
return;
/*
* If the hrtimer interrupt is running, then it will
* reevaluate the clock bases and reprogram the clock event
* device. The callbacks are always executed in hard interrupt
* context so we don't need an extra check for a running
* callback.
*/
if (cpu_base->in_hrtirq)
return;
if (expires >= cpu_base->expires_next)
return;
/* Update the pointer to the next expiring timer */
cpu_base->next_timer = timer;
cpu_base->expires_next = expires;
/*
* If hres is not active, hardware does not have to be
* programmed yet.
*
* If a hang was detected in the last timer interrupt then we
* do not schedule a timer which is earlier than the expiry
* which we enforced in the hang detection. We want the system
* to make progress.
*/
if (!__hrtimer_hres_active(cpu_base) || cpu_base->hang_detected)
return;
/*
* Program the timer hardware. We enforce the expiry for
* events which are already in the past.
*/
tick_program_event(expires, 1);
}
/*
* Clock realtime was set
*
* Change the offset of the realtime clock vs. the monotonic
* clock.
*
* We might have to reprogram the high resolution timer interrupt. On
* SMP we call the architecture specific code to retrigger _all_ high
* resolution timer interrupts. On UP we just disable interrupts and
* call the high resolution interrupt code.
*/
void clock_was_set(void)
{
#ifdef CONFIG_HIGH_RES_TIMERS
/* Retrigger the CPU local events everywhere */
on_each_cpu(retrigger_next_event, NULL, 1);
#endif
timerfd_clock_was_set();
}
/*
* During resume we might have to reprogram the high resolution timer
* interrupt on all online CPUs. However, all other CPUs will be
* stopped with IRQs interrupts disabled so the clock_was_set() call
* must be deferred.
*/
void hrtimers_resume(void)
{
lockdep_assert_irqs_disabled();
/* Retrigger on the local CPU */
retrigger_next_event(NULL);
/* And schedule a retrigger for all others */
clock_was_set_delayed();
}
/*
* Counterpart to lock_hrtimer_base above:
*/
static inline
void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
{
raw_spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
}
/**
* hrtimer_forward - forward the timer expiry
* @timer: hrtimer to forward
* @now: forward past this time
* @interval: the interval to forward
*
* Forward the timer expiry so it will expire in the future.
* Returns the number of overruns.
*
* Can be safely called from the callback function of @timer. If
* called from other contexts @timer must neither be enqueued nor
* running the callback and the caller needs to take care of
* serialization.
*
* Note: This only updates the timer expiry value and does not requeue
* the timer.
*/
u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
{
u64 orun = 1;
ktime_t delta;
delta = ktime_sub(now, hrtimer_get_expires(timer));
if (delta < 0)
return 0;
if (WARN_ON(timer->state & HRTIMER_STATE_ENQUEUED))
return 0;
if (interval < hrtimer_resolution)
interval = hrtimer_resolution;
if (unlikely(delta >= interval)) {
s64 incr = ktime_to_ns(interval);
orun = ktime_divns(delta, incr);
hrtimer_add_expires_ns(timer, incr * orun);
if (hrtimer_get_expires_tv64(timer) > now)
return orun;
/*
* This (and the ktime_add() below) is the
* correction for exact:
*/
orun++;
}
hrtimer_add_expires(timer, interval);
return orun;
}
EXPORT_SYMBOL_GPL(hrtimer_forward);
/*
* enqueue_hrtimer - internal function to (re)start a timer
*
* The timer is inserted in expiry order. Insertion into the
* red black tree is O(log(n)). Must hold the base lock.
*
* Returns 1 when the new timer is the leftmost timer in the tree.
*/
static int enqueue_hrtimer(struct hrtimer *timer,
struct hrtimer_clock_base *base,
enum hrtimer_mode mode)
{
debug_activate(timer, mode);
base->cpu_base->active_bases |= 1 << base->index;
timer->state = HRTIMER_STATE_ENQUEUED;
return timerqueue_add(&base->active, &timer->node);
}
/*
* __remove_hrtimer - internal function to remove a timer
*
* Caller must hold the base lock.
*
* High resolution timer mode reprograms the clock event device when the
* timer is the one which expires next. The caller can disable this by setting
* reprogram to zero. This is useful, when the context does a reprogramming
* anyway (e.g. timer interrupt)
*/
static void __remove_hrtimer(struct hrtimer *timer,
struct hrtimer_clock_base *base,
u8 newstate, int reprogram)
{
struct hrtimer_cpu_base *cpu_base = base->cpu_base;
u8 state = timer->state;
timer->state = newstate;
if (!(state & HRTIMER_STATE_ENQUEUED))
return;
if (!timerqueue_del(&base->active, &timer->node))
cpu_base->active_bases &= ~(1 << base->index);
/*
* Note: If reprogram is false we do not update
* cpu_base->next_timer. This happens when we remove the first
* timer on a remote cpu. No harm as we never dereference
* cpu_base->next_timer. So the worst thing what can happen is
* an superflous call to hrtimer_force_reprogram() on the
* remote cpu later on if the same timer gets enqueued again.
*/
if (reprogram && timer == cpu_base->next_timer)
hrtimer_force_reprogram(cpu_base, 1);
}
/*
* remove hrtimer, called with base lock held
*/
static inline int
remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart)
{
if (hrtimer_is_queued(timer)) {
u8 state = timer->state;
int reprogram;
/*
* Remove the timer and force reprogramming when high
* resolution mode is active and the timer is on the current
* CPU. If we remove a timer on another CPU, reprogramming is
* skipped. The interrupt event on this CPU is fired and
* reprogramming happens in the interrupt handler. This is a
* rare case and less expensive than a smp call.
*/
debug_deactivate(timer);
reprogram = base->cpu_base == this_cpu_ptr(&hrtimer_bases);
if (!restart)
state = HRTIMER_STATE_INACTIVE;
__remove_hrtimer(timer, base, state, reprogram);
return 1;
}
return 0;
}
static inline ktime_t hrtimer_update_lowres(struct hrtimer *timer, ktime_t tim,
const enum hrtimer_mode mode)
{
#ifdef CONFIG_TIME_LOW_RES
/*
* CONFIG_TIME_LOW_RES indicates that the system has no way to return
* granular time values. For relative timers we add hrtimer_resolution
* (i.e. one jiffie) to prevent short timeouts.
*/
timer->is_rel = mode & HRTIMER_MODE_REL;
if (timer->is_rel)
tim = ktime_add_safe(tim, hrtimer_resolution);
#endif
return tim;
}
static void
hrtimer_update_softirq_timer(struct hrtimer_cpu_base *cpu_base, bool reprogram)
{
ktime_t expires;
/*
* Find the next SOFT expiration.
*/
expires = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_SOFT);
/*
* reprogramming needs to be triggered, even if the next soft
* hrtimer expires at the same time than the next hard
* hrtimer. cpu_base->softirq_expires_next needs to be updated!
*/
if (expires == KTIME_MAX)
return;
/*
* cpu_base->*next_timer is recomputed by __hrtimer_get_next_event()
* cpu_base->*expires_next is only set by hrtimer_reprogram()
*/
hrtimer_reprogram(cpu_base->softirq_next_timer, reprogram);
}
static int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
u64 delta_ns, const enum hrtimer_mode mode,
struct hrtimer_clock_base *base)
{
struct hrtimer_clock_base *new_base;
/* Remove an active timer from the queue: */
remove_hrtimer(timer, base, true);
if (mode & HRTIMER_MODE_REL)
tim = ktime_add_safe(tim, base->get_time());
tim = hrtimer_update_lowres(timer, tim, mode);
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
/* Switch the timer base, if necessary: */
new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
return enqueue_hrtimer(timer, new_base, mode);
}
/**
* hrtimer_start_range_ns - (re)start an hrtimer
* @timer: the timer to be added
* @tim: expiry time
* @delta_ns: "slack" range for the timer
* @mode: timer mode: absolute (HRTIMER_MODE_ABS) or
* relative (HRTIMER_MODE_REL), and pinned (HRTIMER_MODE_PINNED);
* softirq based mode is considered for debug purpose only!
*/
void hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
u64 delta_ns, const enum hrtimer_mode mode)
{
struct hrtimer_clock_base *base;
unsigned long flags;
/*
* Check whether the HRTIMER_MODE_SOFT bit and hrtimer.is_soft
* match.
*/
WARN_ON_ONCE(!(mode & HRTIMER_MODE_SOFT) ^ !timer->is_soft);
base = lock_hrtimer_base(timer, &flags);
if (__hrtimer_start_range_ns(timer, tim, delta_ns, mode, base))
hrtimer_reprogram(timer, true);
unlock_hrtimer_base(timer, &flags);
}
EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
/**
* hrtimer_try_to_cancel - try to deactivate a timer
* @timer: hrtimer to stop
*
* Returns:
* 0 when the timer was not active
* 1 when the timer was active
* -1 when the timer is currently executing the callback function and
* cannot be stopped
*/
int hrtimer_try_to_cancel(struct hrtimer *timer)
{
struct hrtimer_clock_base *base;
unsigned long flags;
int ret = -1;
/*
* Check lockless first. If the timer is not active (neither
* enqueued nor running the callback, nothing to do here. The
* base lock does not serialize against a concurrent enqueue,
* so we can avoid taking it.
*/
if (!hrtimer_active(timer))
return 0;
base = lock_hrtimer_base(timer, &flags);
if (!hrtimer_callback_running(timer))
ret = remove_hrtimer(timer, base, false);
unlock_hrtimer_base(timer, &flags);
return ret;
}
EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
/**
* hrtimer_cancel - cancel a timer and wait for the handler to finish.
* @timer: the timer to be cancelled
*
* Returns:
* 0 when the timer was not active
* 1 when the timer was active
*/
int hrtimer_cancel(struct hrtimer *timer)
{
for (;;) {
int ret = hrtimer_try_to_cancel(timer);
if (ret >= 0)
return ret;
cpu_relax();
}
}
EXPORT_SYMBOL_GPL(hrtimer_cancel);
/**
* hrtimer_get_remaining - get remaining time for the timer
* @timer: the timer to read
* @adjust: adjust relative timers when CONFIG_TIME_LOW_RES=y
*/
ktime_t __hrtimer_get_remaining(const struct hrtimer *timer, bool adjust)
{
unsigned long flags;
ktime_t rem;
lock_hrtimer_base(timer, &flags);
if (IS_ENABLED(CONFIG_TIME_LOW_RES) && adjust)
rem = hrtimer_expires_remaining_adjusted(timer);
else
rem = hrtimer_expires_remaining(timer);
unlock_hrtimer_base(timer, &flags);
return rem;
}
EXPORT_SYMBOL_GPL(__hrtimer_get_remaining);
#ifdef CONFIG_NO_HZ_COMMON
/**
* hrtimer_get_next_event - get the time until next expiry event
*
* Returns the next expiry time or KTIME_MAX if no timer is pending.
*/
u64 hrtimer_get_next_event(void)
{
struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
u64 expires = KTIME_MAX;
unsigned long flags;
raw_spin_lock_irqsave(&cpu_base->lock, flags);
if (!__hrtimer_hres_active(cpu_base))
expires = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_ALL);
raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
return expires;
}
/**
* hrtimer_next_event_without - time until next expiry event w/o one timer
* @exclude: timer to exclude
*
* Returns the next expiry time over all timers except for the @exclude one or
* KTIME_MAX if none of them is pending.
*/
u64 hrtimer_next_event_without(const struct hrtimer *exclude)
{
struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
u64 expires = KTIME_MAX;
unsigned long flags;
raw_spin_lock_irqsave(&cpu_base->lock, flags);
if (__hrtimer_hres_active(cpu_base)) {
unsigned int active;
if (!cpu_base->softirq_activated) {
active = cpu_base->active_bases & HRTIMER_ACTIVE_SOFT;
expires = __hrtimer_next_event_base(cpu_base, exclude,
active, KTIME_MAX);
}
active = cpu_base->active_bases & HRTIMER_ACTIVE_HARD;
expires = __hrtimer_next_event_base(cpu_base, exclude, active,
expires);
}
raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
return expires;
}
#endif
static inline int hrtimer_clockid_to_base(clockid_t clock_id)
{
if (likely(clock_id < MAX_CLOCKS)) {
int base = hrtimer_clock_to_base_table[clock_id];
if (likely(base != HRTIMER_MAX_CLOCK_BASES))
return base;
}
WARN(1, "Invalid clockid %d. Using MONOTONIC\n", clock_id);
return HRTIMER_BASE_MONOTONIC;
}
static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
enum hrtimer_mode mode)
{
bool softtimer = !!(mode & HRTIMER_MODE_SOFT);
int base = softtimer ? HRTIMER_MAX_CLOCK_BASES / 2 : 0;
struct hrtimer_cpu_base *cpu_base;
memset(timer, 0, sizeof(struct hrtimer));
cpu_base = raw_cpu_ptr(&hrtimer_bases);
/*
* POSIX magic: Relative CLOCK_REALTIME timers are not affected by
* clock modifications, so they needs to become CLOCK_MONOTONIC to
* ensure POSIX compliance.
*/
if (clock_id == CLOCK_REALTIME && mode & HRTIMER_MODE_REL)
clock_id = CLOCK_MONOTONIC;
base += hrtimer_clockid_to_base(clock_id);
timer->is_soft = softtimer;
timer->base = &cpu_base->clock_base[base];
timerqueue_init(&timer->node);
}
/**
* hrtimer_init - initialize a timer to the given clock
* @timer: the timer to be initialized
* @clock_id: the clock to be used
* @mode: The modes which are relevant for intitialization:
* HRTIMER_MODE_ABS, HRTIMER_MODE_REL, HRTIMER_MODE_ABS_SOFT,
* HRTIMER_MODE_REL_SOFT
*
* The PINNED variants of the above can be handed in,
* but the PINNED bit is ignored as pinning happens
* when the hrtimer is started
*/
void hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
enum hrtimer_mode mode)
{
debug_init(timer, clock_id, mode);
__hrtimer_init(timer, clock_id, mode);
}
EXPORT_SYMBOL_GPL(hrtimer_init);
/*
* A timer is active, when it is enqueued into the rbtree or the
* callback function is running or it's in the state of being migrated
* to another cpu.
*
* It is important for this function to not return a false negative.
*/
bool hrtimer_active(const struct hrtimer *timer)
{
struct hrtimer_clock_base *base;
unsigned int seq;
do {
base = READ_ONCE(timer->base);
seq = raw_read_seqcount_begin(&base->seq);
if (timer->state != HRTIMER_STATE_INACTIVE ||
base->running == timer)
return true;
} while (read_seqcount_retry(&base->seq, seq) ||
base != READ_ONCE(timer->base));
return false;
}
EXPORT_SYMBOL_GPL(hrtimer_active);
/*
* The write_seqcount_barrier()s in __run_hrtimer() split the thing into 3
* distinct sections:
*
* - queued: the timer is queued
* - callback: the timer is being ran
* - post: the timer is inactive or (re)queued
*
* On the read side we ensure we observe timer->state and cpu_base->running
* from the same section, if anything changed while we looked at it, we retry.
* This includes timer->base changing because sequence numbers alone are
* insufficient for that.
*
* The sequence numbers are required because otherwise we could still observe
* a false negative if the read side got smeared over multiple consequtive
* __run_hrtimer() invocations.
*/
static void __run_hrtimer(struct hrtimer_cpu_base *cpu_base,
struct hrtimer_clock_base *base,
struct hrtimer *timer, ktime_t *now,
unsigned long flags)
{
enum hrtimer_restart (*fn)(struct hrtimer *);
int restart;
lockdep_assert_held(&cpu_base->lock);
debug_deactivate(timer);
base->running = timer;
/*
* Separate the ->running assignment from the ->state assignment.
*
* As with a regular write barrier, this ensures the read side in
* hrtimer_active() cannot observe base->running == NULL &&
* timer->state == INACTIVE.
*/
raw_write_seqcount_barrier(&base->seq);
__remove_hrtimer(timer, base, HRTIMER_STATE_INACTIVE, 0);
fn = timer->function;
/*
* Clear the 'is relative' flag for the TIME_LOW_RES case. If the
* timer is restarted with a period then it becomes an absolute
* timer. If its not restarted it does not matter.
*/
if (IS_ENABLED(CONFIG_TIME_LOW_RES))
timer->is_rel = false;
/*
* The timer is marked as running in the CPU base, so it is
* protected against migration to a different CPU even if the lock
* is dropped.
*/
raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
trace_hrtimer_expire_entry(timer, now);
restart = fn(timer);
trace_hrtimer_expire_exit(timer);
raw_spin_lock_irq(&cpu_base->lock);
/*
* Note: We clear the running state after enqueue_hrtimer and
* we do not reprogram the event hardware. Happens either in
* hrtimer_start_range_ns() or in hrtimer_interrupt()
*
* Note: Because we dropped the cpu_base->lock above,
* hrtimer_start_range_ns() can have popped in and enqueued the timer
* for us already.
*/
if (restart != HRTIMER_NORESTART &&
!(timer->state & HRTIMER_STATE_ENQUEUED))
enqueue_hrtimer(timer, base, HRTIMER_MODE_ABS);
/*
* Separate the ->running assignment from the ->state assignment.
*
* As with a regular write barrier, this ensures the read side in
* hrtimer_active() cannot observe base->running.timer == NULL &&
* timer->state == INACTIVE.
*/
raw_write_seqcount_barrier(&base->seq);
WARN_ON_ONCE(base->running != timer);
base->running = NULL;
}
static void __hrtimer_run_queues(struct hrtimer_cpu_base *cpu_base, ktime_t now,
unsigned long flags, unsigned int active_mask)
{
struct hrtimer_clock_base *base;
unsigned int active = cpu_base->active_bases & active_mask;
for_each_active_base(base, cpu_base, active) {
struct timerqueue_node *node;
ktime_t basenow;
basenow = ktime_add(now, base->offset);
while ((node = timerqueue_getnext(&base->active))) {
struct hrtimer *timer;
timer = container_of(node, struct hrtimer, node);
/*
* The immediate goal for using the softexpires is
* minimizing wakeups, not running timers at the
* earliest interrupt after their soft expiration.
* This allows us to avoid using a Priority Search
* Tree, which can answer a stabbing querry for
* overlapping intervals and instead use the simple
* BST we already have.
* We don't add extra wakeups by delaying timers that
* are right-of a not yet expired timer, because that
* timer will have to trigger a wakeup anyway.
*/
if (basenow < hrtimer_get_softexpires_tv64(timer))
break;
__run_hrtimer(cpu_base, base, timer, &basenow, flags);
}
}
}
static __latent_entropy void hrtimer_run_softirq(struct softirq_action *h)
{
struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
unsigned long flags;
ktime_t now;
raw_spin_lock_irqsave(&cpu_base->lock, flags);
now = hrtimer_update_base(cpu_base);
__hrtimer_run_queues(cpu_base, now, flags, HRTIMER_ACTIVE_SOFT);
cpu_base->softirq_activated = 0;
hrtimer_update_softirq_timer(cpu_base, true);
raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
}
#ifdef CONFIG_HIGH_RES_TIMERS
/*
* High resolution timer interrupt
* Called with interrupts disabled
*/
void hrtimer_interrupt(struct clock_event_device *dev)
{
struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
ktime_t expires_next, now, entry_time, delta;
unsigned long flags;
int retries = 0;
BUG_ON(!cpu_base->hres_active);
cpu_base->nr_events++;
dev->next_event = KTIME_MAX;
raw_spin_lock_irqsave(&cpu_base->lock, flags);
entry_time = now = hrtimer_update_base(cpu_base);
retry:
cpu_base->in_hrtirq = 1;
/*
* We set expires_next to KTIME_MAX here with cpu_base->lock
* held to prevent that a timer is enqueued in our queue via
* the migration code. This does not affect enqueueing of
* timers which run their callback and need to be requeued on
* this CPU.
*/
cpu_base->expires_next = KTIME_MAX;
if (!ktime_before(now, cpu_base->softirq_expires_next)) {
cpu_base->softirq_expires_next = KTIME_MAX;
cpu_base->softirq_activated = 1;
raise_softirq_irqoff(HRTIMER_SOFTIRQ);
}
__hrtimer_run_queues(cpu_base, now, flags, HRTIMER_ACTIVE_HARD);
/* Reevaluate the clock bases for the next expiry */
expires_next = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_ALL);
/*
* Store the new expiry value so the migration code can verify
* against it.
*/
cpu_base->expires_next = expires_next;
cpu_base->in_hrtirq = 0;
raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
/* Reprogramming necessary ? */
if (!tick_program_event(expires_next, 0)) {
cpu_base->hang_detected = 0;
return;
}
/*
* The next timer was already expired due to:
* - tracing
* - long lasting callbacks
* - being scheduled away when running in a VM
*
* We need to prevent that we loop forever in the hrtimer
* interrupt routine. We give it 3 attempts to avoid
* overreacting on some spurious event.
*
* Acquire base lock for updating the offsets and retrieving
* the current time.
*/
raw_spin_lock_irqsave(&cpu_base->lock, flags);
now = hrtimer_update_base(cpu_base);
cpu_base->nr_retries++;
if (++retries < 3)
goto retry;
/*
* Give the system a chance to do something else than looping
* here. We stored the entry time, so we know exactly how long
* we spent here. We schedule the next event this amount of
* time away.
*/
cpu_base->nr_hangs++;
cpu_base->hang_detected = 1;
raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
delta = ktime_sub(now, entry_time);
if ((unsigned int)delta > cpu_base->max_hang_time)
cpu_base->max_hang_time = (unsigned int) delta;
/*
* Limit it to a sensible value as we enforce a longer
* delay. Give the CPU at least 100ms to catch up.
*/
if (delta > 100 * NSEC_PER_MSEC)
expires_next = ktime_add_ns(now, 100 * NSEC_PER_MSEC);
else
expires_next = ktime_add(now, delta);
tick_program_event(expires_next, 1);
pr_warn_once("hrtimer: interrupt took %llu ns\n", ktime_to_ns(delta));
}
/* called with interrupts disabled */
static inline void __hrtimer_peek_ahead_timers(void)
{
struct tick_device *td;
if (!hrtimer_hres_active())
return;
td = this_cpu_ptr(&tick_cpu_device);
if (td && td->evtdev)
hrtimer_interrupt(td->evtdev);
}
#else /* CONFIG_HIGH_RES_TIMERS */
static inline void __hrtimer_peek_ahead_timers(void) { }
#endif /* !CONFIG_HIGH_RES_TIMERS */
/*
* Called from run_local_timers in hardirq context every jiffy
*/
void hrtimer_run_queues(void)
{
struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
unsigned long flags;
ktime_t now;
if (__hrtimer_hres_active(cpu_base))
return;
/*
* This _is_ ugly: We have to check periodically, whether we
* can switch to highres and / or nohz mode. The clocksource
* switch happens with xtime_lock held. Notification from
* there only sets the check bit in the tick_oneshot code,
* otherwise we might deadlock vs. xtime_lock.
*/
if (tick_check_oneshot_change(!hrtimer_is_hres_enabled())) {
hrtimer_switch_to_hres();
return;
}
raw_spin_lock_irqsave(&cpu_base->lock, flags);
now = hrtimer_update_base(cpu_base);
if (!ktime_before(now, cpu_base->softirq_expires_next)) {
cpu_base->softirq_expires_next = KTIME_MAX;
cpu_base->softirq_activated = 1;
raise_softirq_irqoff(HRTIMER_SOFTIRQ);
}
__hrtimer_run_queues(cpu_base, now, flags, HRTIMER_ACTIVE_HARD);
raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
}
/*
* Sleep related functions:
*/
static enum hrtimer_restart hrtimer_wakeup(struct hrtimer *timer)
{
struct hrtimer_sleeper *t =
container_of(timer, struct hrtimer_sleeper, timer);
struct task_struct *task = t->task;
t->task = NULL;
if (task)
wake_up_process(task);
return HRTIMER_NORESTART;
}
void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task)
{
sl->timer.function = hrtimer_wakeup;
sl->task = task;
}
EXPORT_SYMBOL_GPL(hrtimer_init_sleeper);
int nanosleep_copyout(struct restart_block *restart, struct timespec64 *ts)
{
switch(restart->nanosleep.type) {
#ifdef CONFIG_COMPAT_32BIT_TIME
case TT_COMPAT:
if (put_old_timespec32(ts, restart->nanosleep.compat_rmtp))
return -EFAULT;
break;
#endif
case TT_NATIVE:
if (put_timespec64(ts, restart->nanosleep.rmtp))
return -EFAULT;
break;
default:
BUG();
}
return -ERESTART_RESTARTBLOCK;
}
static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
{
struct restart_block *restart;
hrtimer_init_sleeper(t, current);
do {
set_current_state(TASK_INTERRUPTIBLE);
hrtimer_start_expires(&t->timer, mode);
if (likely(t->task))
freezable_schedule();
hrtimer_cancel(&t->timer);
mode = HRTIMER_MODE_ABS;
} while (t->task && !signal_pending(current));
__set_current_state(TASK_RUNNING);
if (!t->task)
return 0;
restart = &current->restart_block;
if (restart->nanosleep.type != TT_NONE) {
ktime_t rem = hrtimer_expires_remaining(&t->timer);
struct timespec64 rmt;
if (rem <= 0)
return 0;
rmt = ktime_to_timespec64(rem);
return nanosleep_copyout(restart, &rmt);
}
return -ERESTART_RESTARTBLOCK;
}
static long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
{
struct hrtimer_sleeper t;
int ret;
hrtimer_init_on_stack(&t.timer, restart->nanosleep.clockid,
HRTIMER_MODE_ABS);
hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
ret = do_nanosleep(&t, HRTIMER_MODE_ABS);
destroy_hrtimer_on_stack(&t.timer);
return ret;
}
long hrtimer_nanosleep(const struct timespec64 *rqtp,
const enum hrtimer_mode mode, const clockid_t clockid)
{
struct restart_block *restart;
struct hrtimer_sleeper t;
int ret = 0;
u64 slack;
slack = current->timer_slack_ns;
if (dl_task(current) || rt_task(current))
slack = 0;
hrtimer_init_on_stack(&t.timer, clockid, mode);
hrtimer_set_expires_range_ns(&t.timer, timespec64_to_ktime(*rqtp), slack);
ret = do_nanosleep(&t, mode);
if (ret != -ERESTART_RESTARTBLOCK)
goto out;
/* Absolute timers do not update the rmtp value and restart: */
if (mode == HRTIMER_MODE_ABS) {
ret = -ERESTARTNOHAND;
goto out;
}
restart = &current->restart_block;
restart->fn = hrtimer_nanosleep_restart;
restart->nanosleep.clockid = t.timer.base->clockid;
restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
out:
destroy_hrtimer_on_stack(&t.timer);
return ret;
}
#if !defined(CONFIG_64BIT_TIME) || defined(CONFIG_64BIT)
SYSCALL_DEFINE2(nanosleep, struct __kernel_timespec __user *, rqtp,
struct __kernel_timespec __user *, rmtp)
{
struct timespec64 tu;
if (get_timespec64(&tu, rqtp))
return -EFAULT;
if (!timespec64_valid(&tu))
return -EINVAL;
current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE;
current->restart_block.nanosleep.rmtp = rmtp;
return hrtimer_nanosleep(&tu, HRTIMER_MODE_REL, CLOCK_MONOTONIC);
}
#endif
#ifdef CONFIG_COMPAT_32BIT_TIME
COMPAT_SYSCALL_DEFINE2(nanosleep, struct old_timespec32 __user *, rqtp,
struct old_timespec32 __user *, rmtp)
{
struct timespec64 tu;
if (get_old_timespec32(&tu, rqtp))
return -EFAULT;
if (!timespec64_valid(&tu))
return -EINVAL;
current->restart_block.nanosleep.type = rmtp ? TT_COMPAT : TT_NONE;
current->restart_block.nanosleep.compat_rmtp = rmtp;
return hrtimer_nanosleep(&tu, HRTIMER_MODE_REL, CLOCK_MONOTONIC);
}
#endif
/*
* Functions related to boot-time initialization:
*/
int hrtimers_prepare_cpu(unsigned int cpu)
{
struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
int i;
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
cpu_base->clock_base[i].cpu_base = cpu_base;
timerqueue_init_head(&cpu_base->clock_base[i].active);
}
cpu_base->cpu = cpu;
cpu_base->active_bases = 0;
cpu_base->hres_active = 0;
cpu_base->hang_detected = 0;
cpu_base->next_timer = NULL;
cpu_base->softirq_next_timer = NULL;
cpu_base->expires_next = KTIME_MAX;
cpu_base->softirq_expires_next = KTIME_MAX;
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
struct hrtimer_clock_base *new_base)
{
struct hrtimer *timer;
struct timerqueue_node *node;
while ((node = timerqueue_getnext(&old_base->active))) {
timer = container_of(node, struct hrtimer, node);
BUG_ON(hrtimer_callback_running(timer));
debug_deactivate(timer);
/*
* Mark it as ENQUEUED not INACTIVE otherwise the
* timer could be seen as !active and just vanish away
* under us on another CPU
*/
__remove_hrtimer(timer, old_base, HRTIMER_STATE_ENQUEUED, 0);
timer->base = new_base;
/*
* Enqueue the timers on the new cpu. This does not
* reprogram the event device in case the timer
* expires before the earliest on this CPU, but we run
* hrtimer_interrupt after we migrated everything to
* sort out already expired timers and reprogram the
* event device.
*/
enqueue_hrtimer(timer, new_base, HRTIMER_MODE_ABS);
}
}
int hrtimers_dead_cpu(unsigned int scpu)
{
struct hrtimer_cpu_base *old_base, *new_base;
int i;
BUG_ON(cpu_online(scpu));
tick_cancel_sched_timer(scpu);
/*
* this BH disable ensures that raise_softirq_irqoff() does
* not wakeup ksoftirqd (and acquire the pi-lock) while
* holding the cpu_base lock
*/
local_bh_disable();
local_irq_disable();
old_base = &per_cpu(hrtimer_bases, scpu);
new_base = this_cpu_ptr(&hrtimer_bases);
/*
* The caller is globally serialized and nobody else
* takes two locks at once, deadlock is not possible.
*/
raw_spin_lock(&new_base->lock);
raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
migrate_hrtimer_list(&old_base->clock_base[i],
&new_base->clock_base[i]);
}
/*
* The migration might have changed the first expiring softirq
* timer on this CPU. Update it.
*/
hrtimer_update_softirq_timer(new_base, false);
raw_spin_unlock(&old_base->lock);
raw_spin_unlock(&new_base->lock);
/* Check, if we got expired work to do */
__hrtimer_peek_ahead_timers();
local_irq_enable();
local_bh_enable();
return 0;
}
#endif /* CONFIG_HOTPLUG_CPU */
void __init hrtimers_init(void)
{
hrtimers_prepare_cpu(smp_processor_id());
open_softirq(HRTIMER_SOFTIRQ, hrtimer_run_softirq);
}
/**
* schedule_hrtimeout_range_clock - sleep until timeout
* @expires: timeout value (ktime_t)
* @delta: slack in expires timeout (ktime_t)
* @mode: timer mode
* @clock_id: timer clock to be used
*/
int __sched
schedule_hrtimeout_range_clock(ktime_t *expires, u64 delta,
const enum hrtimer_mode mode, clockid_t clock_id)
{
struct hrtimer_sleeper t;
/*
* Optimize when a zero timeout value is given. It does not
* matter whether this is an absolute or a relative time.
*/
if (expires && *expires == 0) {
__set_current_state(TASK_RUNNING);
return 0;
}
/*
* A NULL parameter means "infinite"
*/
if (!expires) {
schedule();
return -EINTR;
}
hrtimer_init_on_stack(&t.timer, clock_id, mode);
hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
hrtimer_init_sleeper(&t, current);
hrtimer_start_expires(&t.timer, mode);
if (likely(t.task))
schedule();
hrtimer_cancel(&t.timer);
destroy_hrtimer_on_stack(&t.timer);
__set_current_state(TASK_RUNNING);
return !t.task ? 0 : -EINTR;
}
/**
* schedule_hrtimeout_range - sleep until timeout
* @expires: timeout value (ktime_t)
* @delta: slack in expires timeout (ktime_t)
* @mode: timer mode
*
* Make the current task sleep until the given expiry time has
* elapsed. The routine will return immediately unless
* the current task state has been set (see set_current_state()).
*
* The @delta argument gives the kernel the freedom to schedule the
* actual wakeup to a time that is both power and performance friendly.
* The kernel give the normal best effort behavior for "@expires+@delta",
* but may decide to fire the timer earlier, but no earlier than @expires.
*
* You can set the task state as follows -
*
* %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
* pass before the routine returns unless the current task is explicitly
* woken up, (e.g. by wake_up_process()).
*
* %TASK_INTERRUPTIBLE - the routine may return early if a signal is
* delivered to the current task or the current task is explicitly woken
* up.
*
* The current task state is guaranteed to be TASK_RUNNING when this
* routine returns.
*
* Returns 0 when the timer has expired. If the task was woken before the
* timer expired by a signal (only possible in state TASK_INTERRUPTIBLE) or
* by an explicit wakeup, it returns -EINTR.
*/
int __sched schedule_hrtimeout_range(ktime_t *expires, u64 delta,
const enum hrtimer_mode mode)
{
return schedule_hrtimeout_range_clock(expires, delta, mode,
CLOCK_MONOTONIC);
}
EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
/**
* schedule_hrtimeout - sleep until timeout
* @expires: timeout value (ktime_t)
* @mode: timer mode
*
* Make the current task sleep until the given expiry time has
* elapsed. The routine will return immediately unless
* the current task state has been set (see set_current_state()).
*
* You can set the task state as follows -
*
* %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
* pass before the routine returns unless the current task is explicitly
* woken up, (e.g. by wake_up_process()).
*
* %TASK_INTERRUPTIBLE - the routine may return early if a signal is
* delivered to the current task or the current task is explicitly woken
* up.
*
* The current task state is guaranteed to be TASK_RUNNING when this
* routine returns.
*
* Returns 0 when the timer has expired. If the task was woken before the
* timer expired by a signal (only possible in state TASK_INTERRUPTIBLE) or
* by an explicit wakeup, it returns -EINTR.
*/
int __sched schedule_hrtimeout(ktime_t *expires,
const enum hrtimer_mode mode)
{
return schedule_hrtimeout_range(expires, 0, mode);
}
EXPORT_SYMBOL_GPL(schedule_hrtimeout);