mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-23 02:51:47 +00:00
Code Issues Releases Wiki Activity
linux-stable/arch/arm/boot/dts/imx53-m53evk.dts
Markus Pargmann 9eb0e5f9b2 ARM: dts: imx: remove ssi fsl,mode for audio cards 
The DAI mode is and should be configured by the sound card driver as
codec and ssi have to be in the right modes to communicate with each
other. It is possible to operate the ssi unit or the codec in master mode,
sometimes even on the same board in different configurations.

With the latest changes in the fsl-ssi driver, the 'fsl,mode' property
is only handled as a fallback property. If the sound card sets the DAI
mode correctly, this fallback configuration is dropped.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:37 +08:00

460 lines
9.9 KiB
Text
Raw Blame History

/*
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx53.dtsi"
/ {
model = "DENX M53EVK";
compatible = "denx,imx53-m53evk", "fsl,imx53";
memory {
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
};
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
800x480p60 {
native-mode;
clock-frequency = <31500000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
hback-porch = <88>;
hsync-len = <128>;
vback-porch = <33>;
vfront-porch = <9>;
vsync-len = <3>;
vsync-active = <1>;
};
};
port {
display1_in: endpoint {
remote-endpoint = <&ipu_di1_disp1>;
};
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 3000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_backlight>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin_gpio>;
user1 {
label = "user1";
gpios = <&gpio2 8 0>;
linux,default-trigger = "heartbeat";
};
user2 {
label = "user2";
gpios = <&gpio2 9 0>;
linux,default-trigger = "heartbeat";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p2v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_backlight: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "lcd-supply";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
reg_usbh1_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 0>;
};
};
sound {
compatible = "fsl,imx53-m53evk-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx53-m53evk-sgtl5000";
ssi-controller = <&ssi2>;
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT",
"Ext Spk", "LINE_OUT";
mux-int-port = <2>;
mux-ext-port = <4>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can2>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p2v>;
VDDIO-supply = <&reg_3p2v>;
clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <400000>;
status = "okay";
stmpe610@41 {
compatible = "st,stmpe610";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x41>;
id = <0>;
blocks = <0x5>;
interrupts = <6 0x0>;
interrupt-parent = <&gpio7>;
irq-trigger = <0x1>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
reg = <0>;
st,sample-time = <4>;
st,mod-12b = <1>;
st,ref-sel = <0>;
st,adc-freq = <1>;
st,ave-ctrl = <3>;
st,touch-det-delay = <3>;
st,settling = <4>;
st,fraction-z = <7>;
st,i-drive = <1>;
};
};
eeprom: eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
pagesize = <32>;
};
rtc: rtc@68 {
compatible = "stm,m41t62";
reg = <0x68>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx53-m53evk {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
MX53_PAD_GPIO_2__GPIO1_2 0x80000000
MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000
>;
};
led_pin_gpio: led_gpio@0 {
fsl,pins = <
MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
>;
};
pinctrl_can1: can1grp {
fsl,pins = <
MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
>;
};
pinctrl_can2: can2grp {
fsl,pins = <
MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
>;
};
pinctrl_ipu_disp1: ipudisp1grp {
fsl,pins = <
MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5
MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5
MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5
MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5
MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5
MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5
MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5
MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5
MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5
MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5
MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5
MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5
MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5
MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5
MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5
MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5
MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5
MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5
MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5
MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5
MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5
MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5
MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5
MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5
MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5
MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5
MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5
MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5
MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5
MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5
MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5
MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5
>;
};
pinctrl_nand: nandgrp {
fsl,pins = <
MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
>;
};
};
};
&ipu_di1_disp1 {
remote-endpoint = <&display1_in>;
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
status = "okay";
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&sata {
status = "okay";
};
&ssi2 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usbh1_vbus>;
phy_type = "utmi";
status = "okay";
};
&usbotg {
dr_mode = "peripheral";
status = "okay";
};
Reference in a new issue View git blame Copy permalink