mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-05 18:39:59 +00:00
![Linus Torvalds](/assets/img/avatar_default.png)
This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7 3uikzYHlDo3C5pvtJ5TS =ZWk9 -----END PGP SIGNATURE----- Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
819 lines
19 KiB
C
819 lines
19 KiB
C
/*
|
|
* Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
|
|
* Copyright (c) 2007-2010 Vasily Khoruzhick
|
|
*
|
|
* based on smdk2440 written by Ben Dooks
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/memblock.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/input.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/device.h>
|
|
#include <linux/pda_power.h>
|
|
#include <linux/pwm_backlight.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/s3c_adc_battery.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <linux/platform_data/i2c-s3c2410.h>
|
|
#include <linux/platform_data/mmc-s3cmci.h>
|
|
#include <linux/platform_data/mtd-nand-s3c2410.h>
|
|
#include <linux/platform_data/touchscreen-s3c2410.h>
|
|
#include <linux/platform_data/usb-s3c2410_udc.h>
|
|
|
|
#include <sound/uda1380.h>
|
|
|
|
#include <mach/fb.h>
|
|
#include <mach/regs-gpio.h>
|
|
#include <mach/regs-lcd.h>
|
|
|
|
#include <plat/clock.h>
|
|
#include <plat/cpu.h>
|
|
#include <plat/devs.h>
|
|
#include <plat/pm.h>
|
|
#include <plat/regs-serial.h>
|
|
#include <plat/samsung-time.h>
|
|
|
|
#include "common.h"
|
|
#include "h1940.h"
|
|
|
|
#define LCD_PWM_PERIOD 192960
|
|
#define LCD_PWM_DUTY 127353
|
|
|
|
static struct map_desc rx1950_iodesc[] __initdata = {
|
|
};
|
|
|
|
static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
|
|
[0] = {
|
|
.hwport = 0,
|
|
.flags = 0,
|
|
.ucon = 0x3c5,
|
|
.ulcon = 0x03,
|
|
.ufcon = 0x51,
|
|
.clk_sel = S3C2410_UCON_CLKSEL3,
|
|
},
|
|
[1] = {
|
|
.hwport = 1,
|
|
.flags = 0,
|
|
.ucon = 0x3c5,
|
|
.ulcon = 0x03,
|
|
.ufcon = 0x51,
|
|
.clk_sel = S3C2410_UCON_CLKSEL3,
|
|
},
|
|
/* IR port */
|
|
[2] = {
|
|
.hwport = 2,
|
|
.flags = 0,
|
|
.ucon = 0x3c5,
|
|
.ulcon = 0x43,
|
|
.ufcon = 0xf1,
|
|
.clk_sel = S3C2410_UCON_CLKSEL3,
|
|
},
|
|
};
|
|
|
|
static struct s3c2410fb_display rx1950_display = {
|
|
.type = S3C2410_LCDCON1_TFT,
|
|
.width = 240,
|
|
.height = 320,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
|
|
.pixclock = 260000,
|
|
.left_margin = 10,
|
|
.right_margin = 20,
|
|
.hsync_len = 10,
|
|
.upper_margin = 2,
|
|
.lower_margin = 2,
|
|
.vsync_len = 2,
|
|
|
|
.lcdcon5 = S3C2410_LCDCON5_FRM565 |
|
|
S3C2410_LCDCON5_INVVCLK |
|
|
S3C2410_LCDCON5_INVVLINE |
|
|
S3C2410_LCDCON5_INVVFRAME |
|
|
S3C2410_LCDCON5_HWSWP |
|
|
(0x02 << 13) |
|
|
(0x02 << 15),
|
|
|
|
};
|
|
|
|
static int power_supply_init(struct device *dev)
|
|
{
|
|
return gpio_request(S3C2410_GPF(2), "cable plugged");
|
|
}
|
|
|
|
static int rx1950_is_ac_online(void)
|
|
{
|
|
return !gpio_get_value(S3C2410_GPF(2));
|
|
}
|
|
|
|
static void power_supply_exit(struct device *dev)
|
|
{
|
|
gpio_free(S3C2410_GPF(2));
|
|
}
|
|
|
|
static char *rx1950_supplicants[] = {
|
|
"main-battery"
|
|
};
|
|
|
|
static struct pda_power_pdata power_supply_info = {
|
|
.init = power_supply_init,
|
|
.is_ac_online = rx1950_is_ac_online,
|
|
.exit = power_supply_exit,
|
|
.supplied_to = rx1950_supplicants,
|
|
.num_supplicants = ARRAY_SIZE(rx1950_supplicants),
|
|
};
|
|
|
|
static struct resource power_supply_resources[] = {
|
|
[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
|
|
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
|
|
};
|
|
|
|
static struct platform_device power_supply = {
|
|
.name = "pda-power",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data =
|
|
&power_supply_info,
|
|
},
|
|
.resource = power_supply_resources,
|
|
.num_resources = ARRAY_SIZE(power_supply_resources),
|
|
};
|
|
|
|
static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
|
|
{ .volt = 4100, .cur = 156, .level = 100},
|
|
{ .volt = 4050, .cur = 156, .level = 95},
|
|
{ .volt = 4025, .cur = 141, .level = 90},
|
|
{ .volt = 3995, .cur = 144, .level = 85},
|
|
{ .volt = 3957, .cur = 162, .level = 80},
|
|
{ .volt = 3931, .cur = 147, .level = 75},
|
|
{ .volt = 3902, .cur = 147, .level = 70},
|
|
{ .volt = 3863, .cur = 153, .level = 65},
|
|
{ .volt = 3838, .cur = 150, .level = 60},
|
|
{ .volt = 3800, .cur = 153, .level = 55},
|
|
{ .volt = 3765, .cur = 153, .level = 50},
|
|
{ .volt = 3748, .cur = 172, .level = 45},
|
|
{ .volt = 3740, .cur = 153, .level = 40},
|
|
{ .volt = 3714, .cur = 175, .level = 35},
|
|
{ .volt = 3710, .cur = 156, .level = 30},
|
|
{ .volt = 3963, .cur = 156, .level = 25},
|
|
{ .volt = 3672, .cur = 178, .level = 20},
|
|
{ .volt = 3651, .cur = 178, .level = 15},
|
|
{ .volt = 3629, .cur = 178, .level = 10},
|
|
{ .volt = 3612, .cur = 162, .level = 5},
|
|
{ .volt = 3605, .cur = 162, .level = 0},
|
|
};
|
|
|
|
static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
|
|
{ .volt = 4200, .cur = 0, .level = 100},
|
|
{ .volt = 4190, .cur = 0, .level = 99},
|
|
{ .volt = 4178, .cur = 0, .level = 95},
|
|
{ .volt = 4110, .cur = 0, .level = 70},
|
|
{ .volt = 4076, .cur = 0, .level = 65},
|
|
{ .volt = 4046, .cur = 0, .level = 60},
|
|
{ .volt = 4021, .cur = 0, .level = 55},
|
|
{ .volt = 3999, .cur = 0, .level = 50},
|
|
{ .volt = 3982, .cur = 0, .level = 45},
|
|
{ .volt = 3965, .cur = 0, .level = 40},
|
|
{ .volt = 3957, .cur = 0, .level = 35},
|
|
{ .volt = 3948, .cur = 0, .level = 30},
|
|
{ .volt = 3936, .cur = 0, .level = 25},
|
|
{ .volt = 3927, .cur = 0, .level = 20},
|
|
{ .volt = 3906, .cur = 0, .level = 15},
|
|
{ .volt = 3880, .cur = 0, .level = 10},
|
|
{ .volt = 3829, .cur = 0, .level = 5},
|
|
{ .volt = 3820, .cur = 0, .level = 0},
|
|
};
|
|
|
|
static int rx1950_bat_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
|
|
if (ret)
|
|
goto err_gpio1;
|
|
ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
|
|
if (ret)
|
|
goto err_gpio2;
|
|
|
|
return 0;
|
|
|
|
err_gpio2:
|
|
gpio_free(S3C2410_GPJ(2));
|
|
err_gpio1:
|
|
return ret;
|
|
}
|
|
|
|
static void rx1950_bat_exit(void)
|
|
{
|
|
gpio_free(S3C2410_GPJ(2));
|
|
gpio_free(S3C2410_GPJ(3));
|
|
}
|
|
|
|
static void rx1950_enable_charger(void)
|
|
{
|
|
gpio_direction_output(S3C2410_GPJ(2), 1);
|
|
gpio_direction_output(S3C2410_GPJ(3), 1);
|
|
}
|
|
|
|
static void rx1950_disable_charger(void)
|
|
{
|
|
gpio_direction_output(S3C2410_GPJ(2), 0);
|
|
gpio_direction_output(S3C2410_GPJ(3), 0);
|
|
}
|
|
|
|
static DEFINE_SPINLOCK(rx1950_blink_spin);
|
|
|
|
static int rx1950_led_blink_set(unsigned gpio, int state,
|
|
unsigned long *delay_on, unsigned long *delay_off)
|
|
{
|
|
int blink_gpio, check_gpio;
|
|
|
|
switch (gpio) {
|
|
case S3C2410_GPA(6):
|
|
blink_gpio = S3C2410_GPA(4);
|
|
check_gpio = S3C2410_GPA(3);
|
|
break;
|
|
case S3C2410_GPA(7):
|
|
blink_gpio = S3C2410_GPA(3);
|
|
check_gpio = S3C2410_GPA(4);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (delay_on && delay_off && !*delay_on && !*delay_off)
|
|
*delay_on = *delay_off = 500;
|
|
|
|
spin_lock(&rx1950_blink_spin);
|
|
|
|
switch (state) {
|
|
case GPIO_LED_NO_BLINK_LOW:
|
|
case GPIO_LED_NO_BLINK_HIGH:
|
|
if (!gpio_get_value(check_gpio))
|
|
gpio_set_value(S3C2410_GPJ(6), 0);
|
|
gpio_set_value(blink_gpio, 0);
|
|
gpio_set_value(gpio, state);
|
|
break;
|
|
case GPIO_LED_BLINK:
|
|
gpio_set_value(gpio, 0);
|
|
gpio_set_value(S3C2410_GPJ(6), 1);
|
|
gpio_set_value(blink_gpio, 1);
|
|
break;
|
|
}
|
|
|
|
spin_unlock(&rx1950_blink_spin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct gpio_led rx1950_leds_desc[] = {
|
|
{
|
|
.name = "Green",
|
|
.default_trigger = "main-battery-full",
|
|
.gpio = S3C2410_GPA(6),
|
|
.retain_state_suspended = 1,
|
|
},
|
|
{
|
|
.name = "Red",
|
|
.default_trigger
|
|
= "main-battery-charging-blink-full-solid",
|
|
.gpio = S3C2410_GPA(7),
|
|
.retain_state_suspended = 1,
|
|
},
|
|
{
|
|
.name = "Blue",
|
|
.default_trigger = "rx1950-acx-mem",
|
|
.gpio = S3C2410_GPA(11),
|
|
.retain_state_suspended = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data rx1950_leds_pdata = {
|
|
.num_leds = ARRAY_SIZE(rx1950_leds_desc),
|
|
.leds = rx1950_leds_desc,
|
|
.gpio_blink_set = rx1950_led_blink_set,
|
|
};
|
|
|
|
static struct platform_device rx1950_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &rx1950_leds_pdata,
|
|
},
|
|
};
|
|
|
|
static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
|
|
.init = rx1950_bat_init,
|
|
.exit = rx1950_bat_exit,
|
|
.enable_charger = rx1950_enable_charger,
|
|
.disable_charger = rx1950_disable_charger,
|
|
.gpio_charge_finished = S3C2410_GPF(3),
|
|
.lut_noac = bat_lut_noac,
|
|
.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
|
|
.lut_acin = bat_lut_acin,
|
|
.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
|
|
.volt_channel = 0,
|
|
.current_channel = 1,
|
|
.volt_mult = 4235,
|
|
.current_mult = 2900,
|
|
.internal_impedance = 200,
|
|
};
|
|
|
|
static struct platform_device rx1950_battery = {
|
|
.name = "s3c-adc-battery",
|
|
.id = -1,
|
|
.dev = {
|
|
.parent = &s3c_device_adc.dev,
|
|
.platform_data = &rx1950_bat_cfg,
|
|
},
|
|
};
|
|
|
|
static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
|
|
.displays = &rx1950_display,
|
|
.num_displays = 1,
|
|
.default_display = 0,
|
|
|
|
.lpcsel = 0x02,
|
|
.gpccon = 0xaa9556a9,
|
|
.gpccon_mask = 0xffc003fc,
|
|
.gpcup = 0x0000ffff,
|
|
.gpcup_mask = 0xffffffff,
|
|
|
|
.gpdcon = 0xaa90aaa1,
|
|
.gpdcon_mask = 0xffc0fff0,
|
|
.gpdup = 0x0000fcfd,
|
|
.gpdup_mask = 0xffffffff,
|
|
|
|
};
|
|
|
|
static struct pwm_device *lcd_pwm;
|
|
|
|
static void rx1950_lcd_power(int enable)
|
|
{
|
|
int i;
|
|
static int enabled;
|
|
if (enabled == enable)
|
|
return;
|
|
if (!enable) {
|
|
|
|
/* GPC11-GPC15->OUTPUT */
|
|
for (i = 11; i < 16; i++)
|
|
gpio_direction_output(S3C2410_GPC(i), 1);
|
|
|
|
/* Wait a bit here... */
|
|
mdelay(100);
|
|
|
|
/* GPD2-GPD7->OUTPUT */
|
|
/* GPD11-GPD15->OUTPUT */
|
|
/* GPD2-GPD7->1, GPD11-GPD15->1 */
|
|
for (i = 2; i < 8; i++)
|
|
gpio_direction_output(S3C2410_GPD(i), 1);
|
|
for (i = 11; i < 16; i++)
|
|
gpio_direction_output(S3C2410_GPD(i), 1);
|
|
|
|
/* Wait a bit here...*/
|
|
mdelay(100);
|
|
|
|
/* GPB0->OUTPUT, GPB0->0 */
|
|
gpio_direction_output(S3C2410_GPB(0), 0);
|
|
|
|
/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
|
|
for (i = 1; i < 5; i++)
|
|
gpio_direction_output(S3C2410_GPC(i), 0);
|
|
|
|
/* GPC15-GPC11->0 */
|
|
for (i = 11; i < 16; i++)
|
|
gpio_direction_output(S3C2410_GPC(i), 0);
|
|
|
|
/* GPD15-GPD11->0, GPD2->GPD7->0 */
|
|
for (i = 11; i < 16; i++)
|
|
gpio_direction_output(S3C2410_GPD(i), 0);
|
|
|
|
for (i = 2; i < 8; i++)
|
|
gpio_direction_output(S3C2410_GPD(i), 0);
|
|
|
|
/* GPC6->0, GPC7->0, GPC5->0 */
|
|
gpio_direction_output(S3C2410_GPC(6), 0);
|
|
gpio_direction_output(S3C2410_GPC(7), 0);
|
|
gpio_direction_output(S3C2410_GPC(5), 0);
|
|
|
|
/* GPB1->OUTPUT, GPB1->0 */
|
|
gpio_direction_output(S3C2410_GPB(1), 0);
|
|
pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
|
|
pwm_disable(lcd_pwm);
|
|
|
|
/* GPC0->0, GPC10->0 */
|
|
gpio_direction_output(S3C2410_GPC(0), 0);
|
|
gpio_direction_output(S3C2410_GPC(10), 0);
|
|
} else {
|
|
pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
|
|
pwm_enable(lcd_pwm);
|
|
|
|
gpio_direction_output(S3C2410_GPC(0), 1);
|
|
gpio_direction_output(S3C2410_GPC(5), 1);
|
|
|
|
s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
|
|
gpio_direction_output(S3C2410_GPC(7), 1);
|
|
|
|
for (i = 1; i < 5; i++)
|
|
s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
|
|
|
|
for (i = 11; i < 16; i++)
|
|
s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
|
|
|
|
for (i = 2; i < 8; i++)
|
|
s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
|
|
|
|
for (i = 11; i < 16; i++)
|
|
s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
|
|
|
|
gpio_direction_output(S3C2410_GPC(10), 1);
|
|
gpio_direction_output(S3C2410_GPC(6), 1);
|
|
}
|
|
enabled = enable;
|
|
}
|
|
|
|
static void rx1950_bl_power(int enable)
|
|
{
|
|
static int enabled;
|
|
if (enabled == enable)
|
|
return;
|
|
if (!enable) {
|
|
gpio_direction_output(S3C2410_GPB(0), 0);
|
|
} else {
|
|
/* LED driver need a "push" to power on */
|
|
gpio_direction_output(S3C2410_GPB(0), 1);
|
|
/* Warm up backlight for one period of PWM.
|
|
* Without this trick its almost impossible to
|
|
* enable backlight with low brightness value
|
|
*/
|
|
ndelay(48000);
|
|
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
|
|
}
|
|
enabled = enable;
|
|
}
|
|
|
|
static int rx1950_backlight_init(struct device *dev)
|
|
{
|
|
WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
|
|
lcd_pwm = pwm_request(1, "RX1950 LCD");
|
|
if (IS_ERR(lcd_pwm)) {
|
|
dev_err(dev, "Unable to request PWM for LCD power!\n");
|
|
return PTR_ERR(lcd_pwm);
|
|
}
|
|
|
|
rx1950_lcd_power(1);
|
|
rx1950_bl_power(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rx1950_backlight_exit(struct device *dev)
|
|
{
|
|
rx1950_bl_power(0);
|
|
rx1950_lcd_power(0);
|
|
|
|
pwm_free(lcd_pwm);
|
|
gpio_free(S3C2410_GPB(0));
|
|
}
|
|
|
|
|
|
static int rx1950_backlight_notify(struct device *dev, int brightness)
|
|
{
|
|
if (!brightness) {
|
|
rx1950_bl_power(0);
|
|
rx1950_lcd_power(0);
|
|
} else {
|
|
rx1950_lcd_power(1);
|
|
rx1950_bl_power(1);
|
|
}
|
|
return brightness;
|
|
}
|
|
|
|
static struct platform_pwm_backlight_data rx1950_backlight_data = {
|
|
.pwm_id = 0,
|
|
.max_brightness = 24,
|
|
.dft_brightness = 4,
|
|
.pwm_period_ns = 48000,
|
|
.init = rx1950_backlight_init,
|
|
.notify = rx1950_backlight_notify,
|
|
.exit = rx1950_backlight_exit,
|
|
};
|
|
|
|
static struct platform_device rx1950_backlight = {
|
|
.name = "pwm-backlight",
|
|
.dev = {
|
|
.parent = &s3c_device_timer[0].dev,
|
|
.platform_data = &rx1950_backlight_data,
|
|
},
|
|
};
|
|
|
|
static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
|
|
{
|
|
switch (power_mode) {
|
|
case MMC_POWER_OFF:
|
|
gpio_direction_output(S3C2410_GPJ(1), 0);
|
|
break;
|
|
case MMC_POWER_UP:
|
|
case MMC_POWER_ON:
|
|
gpio_direction_output(S3C2410_GPJ(1), 1);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
|
|
.gpio_detect = S3C2410_GPF(5),
|
|
.gpio_wprotect = S3C2410_GPH(8),
|
|
.set_power = rx1950_set_mmc_power,
|
|
.ocr_avail = MMC_VDD_32_33,
|
|
};
|
|
|
|
static struct mtd_partition rx1950_nand_part[] = {
|
|
[0] = {
|
|
.name = "Boot0",
|
|
.offset = 0,
|
|
.size = 0x4000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
[1] = {
|
|
.name = "Boot1",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 0x40000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
[2] = {
|
|
.name = "Kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 0x300000,
|
|
.mask_flags = 0,
|
|
},
|
|
[3] = {
|
|
.name = "Filesystem",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0,
|
|
},
|
|
};
|
|
|
|
static struct s3c2410_nand_set rx1950_nand_sets[] = {
|
|
[0] = {
|
|
.name = "Internal",
|
|
.nr_chips = 1,
|
|
.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
|
|
.partitions = rx1950_nand_part,
|
|
},
|
|
};
|
|
|
|
static struct s3c2410_platform_nand rx1950_nand_info = {
|
|
.tacls = 25,
|
|
.twrph0 = 50,
|
|
.twrph1 = 15,
|
|
.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
|
|
.sets = rx1950_nand_sets,
|
|
};
|
|
|
|
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
|
|
.vbus_pin = S3C2410_GPG(5),
|
|
.vbus_pin_inverted = 1,
|
|
.pullup_pin = S3C2410_GPJ(5),
|
|
};
|
|
|
|
static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
|
|
.delay = 10000,
|
|
.presc = 49,
|
|
.oversampling_shift = 3,
|
|
};
|
|
|
|
static struct gpio_keys_button rx1950_gpio_keys_table[] = {
|
|
{
|
|
.code = KEY_POWER,
|
|
.gpio = S3C2410_GPF(0),
|
|
.active_low = 1,
|
|
.desc = "Power button",
|
|
.wakeup = 1,
|
|
},
|
|
{
|
|
.code = KEY_F5,
|
|
.gpio = S3C2410_GPF(7),
|
|
.active_low = 1,
|
|
.desc = "Record button",
|
|
},
|
|
{
|
|
.code = KEY_F1,
|
|
.gpio = S3C2410_GPG(0),
|
|
.active_low = 1,
|
|
.desc = "Calendar button",
|
|
},
|
|
{
|
|
.code = KEY_F2,
|
|
.gpio = S3C2410_GPG(2),
|
|
.active_low = 1,
|
|
.desc = "Contacts button",
|
|
},
|
|
{
|
|
.code = KEY_F3,
|
|
.gpio = S3C2410_GPG(3),
|
|
.active_low = 1,
|
|
.desc = "Mail button",
|
|
},
|
|
{
|
|
.code = KEY_F4,
|
|
.gpio = S3C2410_GPG(7),
|
|
.active_low = 1,
|
|
.desc = "WLAN button",
|
|
},
|
|
{
|
|
.code = KEY_LEFT,
|
|
.gpio = S3C2410_GPG(10),
|
|
.active_low = 1,
|
|
.desc = "Left button",
|
|
},
|
|
{
|
|
.code = KEY_RIGHT,
|
|
.gpio = S3C2410_GPG(11),
|
|
.active_low = 1,
|
|
.desc = "Right button",
|
|
},
|
|
{
|
|
.code = KEY_UP,
|
|
.gpio = S3C2410_GPG(4),
|
|
.active_low = 1,
|
|
.desc = "Up button",
|
|
},
|
|
{
|
|
.code = KEY_DOWN,
|
|
.gpio = S3C2410_GPG(6),
|
|
.active_low = 1,
|
|
.desc = "Down button",
|
|
},
|
|
{
|
|
.code = KEY_ENTER,
|
|
.gpio = S3C2410_GPG(9),
|
|
.active_low = 1,
|
|
.desc = "Ok button"
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
|
|
.buttons = rx1950_gpio_keys_table,
|
|
.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
|
|
};
|
|
|
|
static struct platform_device rx1950_device_gpiokeys = {
|
|
.name = "gpio-keys",
|
|
.dev.platform_data = &rx1950_gpio_keys_data,
|
|
};
|
|
|
|
static struct uda1380_platform_data uda1380_info = {
|
|
.gpio_power = S3C2410_GPJ(0),
|
|
.gpio_reset = S3C2410_GPD(0),
|
|
.dac_clk = UDA1380_DAC_CLK_SYSCLK,
|
|
};
|
|
|
|
static struct i2c_board_info rx1950_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("uda1380", 0x1a),
|
|
.platform_data = &uda1380_info,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *rx1950_devices[] __initdata = {
|
|
&s3c_device_lcd,
|
|
&s3c_device_wdt,
|
|
&s3c_device_i2c0,
|
|
&s3c_device_iis,
|
|
&s3c_device_usbgadget,
|
|
&s3c_device_rtc,
|
|
&s3c_device_nand,
|
|
&s3c_device_sdi,
|
|
&s3c_device_adc,
|
|
&s3c_device_ts,
|
|
&s3c_device_timer[0],
|
|
&s3c_device_timer[1],
|
|
&rx1950_backlight,
|
|
&rx1950_device_gpiokeys,
|
|
&power_supply,
|
|
&rx1950_battery,
|
|
&rx1950_leds,
|
|
};
|
|
|
|
static struct clk *rx1950_clocks[] __initdata = {
|
|
&s3c24xx_clkout0,
|
|
&s3c24xx_clkout1,
|
|
};
|
|
|
|
static void __init rx1950_map_io(void)
|
|
{
|
|
s3c24xx_clkout0.parent = &clk_h;
|
|
s3c24xx_clkout1.parent = &clk_f;
|
|
|
|
s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
|
|
|
|
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
|
|
s3c24xx_init_clocks(16934000);
|
|
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
|
|
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
|
|
|
|
/* setup PM */
|
|
|
|
#ifdef CONFIG_PM_H1940
|
|
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
|
|
#endif
|
|
|
|
s3c_pm_init();
|
|
}
|
|
|
|
static void __init rx1950_init_machine(void)
|
|
{
|
|
int i;
|
|
|
|
s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
|
|
s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
|
|
s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
|
|
s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
|
|
s3c_i2c0_set_platdata(NULL);
|
|
s3c_nand_set_platdata(&rx1950_nand_info);
|
|
|
|
/* Turn off suspend on both USB ports, and switch the
|
|
* selectable USB port to USB device mode. */
|
|
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
|
|
S3C2410_MISCCR_USBSUSPND0 |
|
|
S3C2410_MISCCR_USBSUSPND1, 0x0);
|
|
|
|
/* mmc power is disabled by default */
|
|
WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
|
|
gpio_direction_output(S3C2410_GPJ(1), 0);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
|
|
|
|
for (i = 10; i < 16; i++)
|
|
WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
|
|
|
|
for (i = 2; i < 8; i++)
|
|
WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
|
|
|
|
for (i = 11; i < 16; i++)
|
|
WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
|
|
|
|
WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
|
|
|
|
WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
|
|
WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
|
|
WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
|
|
gpio_direction_output(S3C2410_GPA(3), 0);
|
|
gpio_direction_output(S3C2410_GPA(4), 0);
|
|
gpio_direction_output(S3C2410_GPJ(6), 0);
|
|
|
|
platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
|
|
|
|
i2c_register_board_info(0, rx1950_i2c_devices,
|
|
ARRAY_SIZE(rx1950_i2c_devices));
|
|
}
|
|
|
|
/* H1940 and RX3715 need to reserve this for suspend */
|
|
static void __init rx1950_reserve(void)
|
|
{
|
|
memblock_reserve(0x30003000, 0x1000);
|
|
memblock_reserve(0x30081000, 0x1000);
|
|
}
|
|
|
|
MACHINE_START(RX1950, "HP iPAQ RX1950")
|
|
/* Maintainers: Vasily Khoruzhick */
|
|
.atag_offset = 0x100,
|
|
.map_io = rx1950_map_io,
|
|
.reserve = rx1950_reserve,
|
|
.init_irq = s3c2442_init_irq,
|
|
.init_machine = rx1950_init_machine,
|
|
.init_time = samsung_timer_init,
|
|
.restart = s3c244x_restart,
|
|
MACHINE_END
|