mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-06 02:50:43 +00:00
![Martin Blumenstingl](/assets/img/avatar_default.png)
The Meson8/Meson8b/Meson8m2 SoCs embed a DDR clock controller in the MMCBUS registers. There is no public documentation, but the u-boot GPL sources from the Amlogic BSP show that the DDR clock controller is identical on all three SoCs: #define CFG_DDR_CLK 792 #define CFG_PLL_M (((CFG_DDR_CLK/12)*12)/24) #define CFG_PLL_N 1 #define CFG_PLL_OD 1 // from set_ddr_clock: t_ddr_pll_cntl= (CFG_PLL_OD << 16)|(CFG_PLL_N<<9)|(CFG_PLL_M<<0) writel(timing_reg->t_ddr_pll_cntl|(1<<29),AM_DDR_PLL_CNTL); writel(readl(AM_DDR_PLL_CNTL) & (~(1<<29)),AM_DDR_PLL_CNTL); // from hx_ddr_power_down_enter: shut down DDR PLL writel(readl(AM_DDR_PLL_CNTL)|(1<<30),AM_DDR_PLL_CNTL); do { ... } while((readl(AM_DDR_PLL_CNTL)&(1<<31))==0) This translates to: - AM_DDR_PLL_CNTL[29] is the reset bit - AM_DDR_PLL_CNTL[30] is the enable bit - AM_DDR_PLL_CNTL[31] is the lock bit - AM_DDR_PLL_CNTL[8:0] is the m value (assuming the width is 9 bits based on the start of the n value) - AM_DDR_PLL_CNTL[13:9] is the n value (assuming the width is 5 bits based on the start of the od) - AM_DDR_PLL_CNTL[17:16] is the od (assuming the width is 2 bits based on other PLLs on this SoC) Add a driver for this PLL setup because it's used as one of the inputs of the audio clocks. There may be more clocks inside that clock controller - those can be added in subsequent patches. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
149 lines
3.3 KiB
C
149 lines
3.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Amlogic Meson8 DDR clock controller
|
|
*
|
|
* Copyright (C) 2019 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/meson8-ddr-clkc.h>
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include "clk-regmap.h"
|
|
#include "clk-pll.h"
|
|
|
|
#define AM_DDR_PLL_CNTL 0x00
|
|
#define AM_DDR_PLL_CNTL1 0x04
|
|
#define AM_DDR_PLL_CNTL2 0x08
|
|
#define AM_DDR_PLL_CNTL3 0x0c
|
|
#define AM_DDR_PLL_CNTL4 0x10
|
|
#define AM_DDR_PLL_STS 0x14
|
|
#define DDR_CLK_CNTL 0x18
|
|
#define DDR_CLK_STS 0x1c
|
|
|
|
static struct clk_regmap meson8_ddr_pll_dco = {
|
|
.data = &(struct meson_clk_pll_data){
|
|
.en = {
|
|
.reg_off = AM_DDR_PLL_CNTL,
|
|
.shift = 30,
|
|
.width = 1,
|
|
},
|
|
.m = {
|
|
.reg_off = AM_DDR_PLL_CNTL,
|
|
.shift = 0,
|
|
.width = 9,
|
|
},
|
|
.n = {
|
|
.reg_off = AM_DDR_PLL_CNTL,
|
|
.shift = 9,
|
|
.width = 5,
|
|
},
|
|
.l = {
|
|
.reg_off = AM_DDR_PLL_CNTL,
|
|
.shift = 31,
|
|
.width = 1,
|
|
},
|
|
.rst = {
|
|
.reg_off = AM_DDR_PLL_CNTL,
|
|
.shift = 29,
|
|
.width = 1,
|
|
},
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "ddr_pll_dco",
|
|
.ops = &meson_clk_pll_ro_ops,
|
|
.parent_data = &(const struct clk_parent_data) {
|
|
.fw_name = "xtal",
|
|
},
|
|
.num_parents = 1,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap meson8_ddr_pll = {
|
|
.data = &(struct clk_regmap_div_data){
|
|
.offset = AM_DDR_PLL_CNTL,
|
|
.shift = 16,
|
|
.width = 2,
|
|
.flags = CLK_DIVIDER_POWER_OF_TWO,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "ddr_pll",
|
|
.ops = &clk_regmap_divider_ro_ops,
|
|
.parent_hws = (const struct clk_hw *[]) {
|
|
&meson8_ddr_pll_dco.hw
|
|
},
|
|
.num_parents = 1,
|
|
},
|
|
};
|
|
|
|
static struct clk_hw_onecell_data meson8_ddr_clk_hw_onecell_data = {
|
|
.hws = {
|
|
[DDR_CLKID_DDR_PLL_DCO] = &meson8_ddr_pll_dco.hw,
|
|
[DDR_CLKID_DDR_PLL] = &meson8_ddr_pll.hw,
|
|
},
|
|
.num = 2,
|
|
};
|
|
|
|
static struct clk_regmap *const meson8_ddr_clk_regmaps[] = {
|
|
&meson8_ddr_pll_dco,
|
|
&meson8_ddr_pll,
|
|
};
|
|
|
|
static const struct regmap_config meson8_ddr_clkc_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = DDR_CLK_STS,
|
|
};
|
|
|
|
static int meson8_ddr_clkc_probe(struct platform_device *pdev)
|
|
{
|
|
struct regmap *regmap;
|
|
void __iomem *base;
|
|
struct clk_hw *hw;
|
|
int ret, i;
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
regmap = devm_regmap_init_mmio(&pdev->dev, base,
|
|
&meson8_ddr_clkc_regmap_config);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
/* Populate regmap */
|
|
for (i = 0; i < ARRAY_SIZE(meson8_ddr_clk_regmaps); i++)
|
|
meson8_ddr_clk_regmaps[i]->map = regmap;
|
|
|
|
/* Register all clks */
|
|
for (i = 0; i < meson8_ddr_clk_hw_onecell_data.num; i++) {
|
|
hw = meson8_ddr_clk_hw_onecell_data.hws[i];
|
|
|
|
ret = devm_clk_hw_register(&pdev->dev, hw);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Clock registration failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get,
|
|
&meson8_ddr_clk_hw_onecell_data);
|
|
}
|
|
|
|
static const struct of_device_id meson8_ddr_clkc_match_table[] = {
|
|
{ .compatible = "amlogic,meson8-ddr-clkc" },
|
|
{ .compatible = "amlogic,meson8b-ddr-clkc" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static struct platform_driver meson8_ddr_clkc_driver = {
|
|
.probe = meson8_ddr_clkc_probe,
|
|
.driver = {
|
|
.name = "meson8-ddr-clkc",
|
|
.of_match_table = meson8_ddr_clkc_match_table,
|
|
},
|
|
};
|
|
|
|
builtin_platform_driver(meson8_ddr_clkc_driver);
|