mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 17:59:32 +00:00
![Linas Vepstas](/assets/img/avatar_default.png)
Documentation for the spidernet driver. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
204 lines
9.7 KiB
Text
204 lines
9.7 KiB
Text
|
|
The Spidernet Device Driver
|
|
===========================
|
|
|
|
Written by Linas Vepstas <linas@austin.ibm.com>
|
|
|
|
Version of 7 June 2007
|
|
|
|
Abstract
|
|
========
|
|
This document sketches the structure of portions of the spidernet
|
|
device driver in the Linux kernel tree. The spidernet is a gigabit
|
|
ethernet device built into the Toshiba southbridge commonly used
|
|
in the SONY Playstation 3 and the IBM QS20 Cell blade.
|
|
|
|
The Structure of the RX Ring.
|
|
=============================
|
|
The receive (RX) ring is a circular linked list of RX descriptors,
|
|
together with three pointers into the ring that are used to manage its
|
|
contents.
|
|
|
|
The elements of the ring are called "descriptors" or "descrs"; they
|
|
describe the received data. This includes a pointer to a buffer
|
|
containing the received data, the buffer size, and various status bits.
|
|
|
|
There are three primary states that a descriptor can be in: "empty",
|
|
"full" and "not-in-use". An "empty" or "ready" descriptor is ready
|
|
to receive data from the hardware. A "full" descriptor has data in it,
|
|
and is waiting to be emptied and processed by the OS. A "not-in-use"
|
|
descriptor is neither empty or full; it is simply not ready. It may
|
|
not even have a data buffer in it, or is otherwise unusable.
|
|
|
|
During normal operation, on device startup, the OS (specifically, the
|
|
spidernet device driver) allocates a set of RX descriptors and RX
|
|
buffers. These are all marked "empty", ready to receive data. This
|
|
ring is handed off to the hardware, which sequentially fills in the
|
|
buffers, and marks them "full". The OS follows up, taking the full
|
|
buffers, processing them, and re-marking them empty.
|
|
|
|
This filling and emptying is managed by three pointers, the "head"
|
|
and "tail" pointers, managed by the OS, and a hardware current
|
|
descriptor pointer (GDACTDPA). The GDACTDPA points at the descr
|
|
currently being filled. When this descr is filled, the hardware
|
|
marks it full, and advances the GDACTDPA by one. Thus, when there is
|
|
flowing RX traffic, every descr behind it should be marked "full",
|
|
and everything in front of it should be "empty". If the hardware
|
|
discovers that the current descr is not empty, it will signal an
|
|
interrupt, and halt processing.
|
|
|
|
The tail pointer tails or trails the hardware pointer. When the
|
|
hardware is ahead, the tail pointer will be pointing at a "full"
|
|
descr. The OS will process this descr, and then mark it "not-in-use",
|
|
and advance the tail pointer. Thus, when there is flowing RX traffic,
|
|
all of the descrs in front of the tail pointer should be "full", and
|
|
all of those behind it should be "not-in-use". When RX traffic is not
|
|
flowing, then the tail pointer can catch up to the hardware pointer.
|
|
The OS will then note that the current tail is "empty", and halt
|
|
processing.
|
|
|
|
The head pointer (somewhat mis-named) follows after the tail pointer.
|
|
When traffic is flowing, then the head pointer will be pointing at
|
|
a "not-in-use" descr. The OS will perform various housekeeping duties
|
|
on this descr. This includes allocating a new data buffer and
|
|
dma-mapping it so as to make it visible to the hardware. The OS will
|
|
then mark the descr as "empty", ready to receive data. Thus, when there
|
|
is flowing RX traffic, everything in front of the head pointer should
|
|
be "not-in-use", and everything behind it should be "empty". If no
|
|
RX traffic is flowing, then the head pointer can catch up to the tail
|
|
pointer, at which point the OS will notice that the head descr is
|
|
"empty", and it will halt processing.
|
|
|
|
Thus, in an idle system, the GDACTDPA, tail and head pointers will
|
|
all be pointing at the same descr, which should be "empty". All of the
|
|
other descrs in the ring should be "empty" as well.
|
|
|
|
The show_rx_chain() routine will print out the the locations of the
|
|
GDACTDPA, tail and head pointers. It will also summarize the contents
|
|
of the ring, starting at the tail pointer, and listing the status
|
|
of the descrs that follow.
|
|
|
|
A typical example of the output, for a nearly idle system, might be
|
|
|
|
net eth1: Total number of descrs=256
|
|
net eth1: Chain tail located at descr=20
|
|
net eth1: Chain head is at 20
|
|
net eth1: HW curr desc (GDACTDPA) is at 21
|
|
net eth1: Have 1 descrs with stat=x40800101
|
|
net eth1: HW next desc (GDACNEXTDA) is at 22
|
|
net eth1: Last 255 descrs with stat=xa0800000
|
|
|
|
In the above, the hardware has filled in one descr, number 20. Both
|
|
head and tail are pointing at 20, because it has not yet been emptied.
|
|
Meanwhile, hw is pointing at 21, which is free.
|
|
|
|
The "Have nnn decrs" refers to the descr starting at the tail: in this
|
|
case, nnn=1 descr, starting at descr 20. The "Last nnn descrs" refers
|
|
to all of the rest of the descrs, from the last status change. The "nnn"
|
|
is a count of how many descrs have exactly the same status.
|
|
|
|
The status x4... corresponds to "full" and status xa... corresponds
|
|
to "empty". The actual value printed is RXCOMST_A.
|
|
|
|
In the device driver source code, a different set of names are
|
|
used for these same concepts, so that
|
|
|
|
"empty" == SPIDER_NET_DESCR_CARDOWNED == 0xa
|
|
"full" == SPIDER_NET_DESCR_FRAME_END == 0x4
|
|
"not in use" == SPIDER_NET_DESCR_NOT_IN_USE == 0xf
|
|
|
|
|
|
The RX RAM full bug/feature
|
|
===========================
|
|
|
|
As long as the OS can empty out the RX buffers at a rate faster than
|
|
the hardware can fill them, there is no problem. If, for some reason,
|
|
the OS fails to empty the RX ring fast enough, the hardware GDACTDPA
|
|
pointer will catch up to the head, notice the not-empty condition,
|
|
ad stop. However, RX packets may still continue arriving on the wire.
|
|
The spidernet chip can save some limited number of these in local RAM.
|
|
When this local ram fills up, the spider chip will issue an interrupt
|
|
indicating this (GHIINT0STS will show ERRINT, and the GRMFLLINT bit
|
|
will be set in GHIINT1STS). When the RX ram full condition occurs,
|
|
a certain bug/feature is triggered that has to be specially handled.
|
|
This section describes the special handling for this condition.
|
|
|
|
When the OS finally has a chance to run, it will empty out the RX ring.
|
|
In particular, it will clear the descriptor on which the hardware had
|
|
stopped. However, once the hardware has decided that a certain
|
|
descriptor is invalid, it will not restart at that descriptor; instead
|
|
it will restart at the next descr. This potentially will lead to a
|
|
deadlock condition, as the tail pointer will be pointing at this descr,
|
|
which, from the OS point of view, is empty; the OS will be waiting for
|
|
this descr to be filled. However, the hardware has skipped this descr,
|
|
and is filling the next descrs. Since the OS doesn't see this, there
|
|
is a potential deadlock, with the OS waiting for one descr to fill,
|
|
while the hardware is waiting for a different set of descrs to become
|
|
empty.
|
|
|
|
A call to show_rx_chain() at this point indicates the nature of the
|
|
problem. A typical print when the network is hung shows the following:
|
|
|
|
net eth1: Spider RX RAM full, incoming packets might be discarded!
|
|
net eth1: Total number of descrs=256
|
|
net eth1: Chain tail located at descr=255
|
|
net eth1: Chain head is at 255
|
|
net eth1: HW curr desc (GDACTDPA) is at 0
|
|
net eth1: Have 1 descrs with stat=xa0800000
|
|
net eth1: HW next desc (GDACNEXTDA) is at 1
|
|
net eth1: Have 127 descrs with stat=x40800101
|
|
net eth1: Have 1 descrs with stat=x40800001
|
|
net eth1: Have 126 descrs with stat=x40800101
|
|
net eth1: Last 1 descrs with stat=xa0800000
|
|
|
|
Both the tail and head pointers are pointing at descr 255, which is
|
|
marked xa... which is "empty". Thus, from the OS point of view, there
|
|
is nothing to be done. In particular, there is the implicit assumption
|
|
that everything in front of the "empty" descr must surely also be empty,
|
|
as explained in the last section. The OS is waiting for descr 255 to
|
|
become non-empty, which, in this case, will never happen.
|
|
|
|
The HW pointer is at descr 0. This descr is marked 0x4.. or "full".
|
|
Since its already full, the hardware can do nothing more, and thus has
|
|
halted processing. Notice that descrs 0 through 254 are all marked
|
|
"full", while descr 254 and 255 are empty. (The "Last 1 descrs" is
|
|
descr 254, since tail was at 255.) Thus, the system is deadlocked,
|
|
and there can be no forward progress; the OS thinks there's nothing
|
|
to do, and the hardware has nowhere to put incoming data.
|
|
|
|
This bug/feature is worked around with the spider_net_resync_head_ptr()
|
|
routine. When the driver receives RX interrupts, but an examination
|
|
of the RX chain seems to show it is empty, then it is probable that
|
|
the hardware has skipped a descr or two (sometimes dozens under heavy
|
|
network conditions). The spider_net_resync_head_ptr() subroutine will
|
|
search the ring for the next full descr, and the driver will resume
|
|
operations there. Since this will leave "holes" in the ring, there
|
|
is also a spider_net_resync_tail_ptr() that will skip over such holes.
|
|
|
|
As of this writing, the spider_net_resync() strategy seems to work very
|
|
well, even under heavy network loads.
|
|
|
|
|
|
The TX ring
|
|
===========
|
|
The TX ring uses a low-watermark interrupt scheme to make sure that
|
|
the TX queue is appropriately serviced for large packet sizes.
|
|
|
|
For packet sizes greater than about 1KBytes, the kernel can fill
|
|
the TX ring quicker than the device can drain it. Once the ring
|
|
is full, the netdev is stopped. When there is room in the ring,
|
|
the netdev needs to be reawakened, so that more TX packets are placed
|
|
in the ring. The hardware can empty the ring about four times per jiffy,
|
|
so its not appropriate to wait for the poll routine to refill, since
|
|
the poll routine runs only once per jiffy. The low-watermark mechanism
|
|
marks a descr about 1/4th of the way from the bottom of the queue, so
|
|
that an interrupt is generated when the descr is processed. This
|
|
interrupt wakes up the netdev, which can then refill the queue.
|
|
For large packets, this mechanism generates a relatively small number
|
|
of interrupts, about 1K/sec. For smaller packets, this will drop to zero
|
|
interrupts, as the hardware can empty the queue faster than the kernel
|
|
can fill it.
|
|
|
|
|
|
======= END OF DOCUMENT ========
|
|
|