mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
![]() checkpatch.pl warning: Symbolic permissions are not preferred. Consider using octal permissions. Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
---|---|---|
.. | ||
.gitignore | ||
Android.mk | ||
lbtest | ||
loopback_test.c | ||
Makefile | ||
README.loopback |
1 - LOOPBACK DRIVER The driver implements the main logic of the loopback test and provides sysfs files to configure the test and retrieve the results. A user could run a test without the need of the test application given that he understands the sysfs interface of the loopback driver. The loopback kernel driver needs to be loaded and at least one module with the loopback feature enabled must be present for the sysfs files to be created and for the loopback test application to be able to run. To load the module: # modprobe gb-loopback When the module is probed, New files are available on the sysfs directory of the detected loopback device. (typically under "/sys/bus/graybus/devices"). Here is a short summary of the sysfs interface files that should be visible: * Loopback Configuration Files: async - Use asynchronous operations. iteration_max - Number of tests iterations to perform. size - payload size of the transfer. timeout - The number of microseconds to give an individual asynchronous request before timing out. us_wait - Time to wait between 2 messages type - By writing the test type to this file, the test starts. Valid tests are: 0 stop the test 2 - ping 3 - transfer 4 - sink * Loopback feedback files: error - number of errors that have occurred. iteration_count - Number of iterations performed. requests_completed - Number of requests successfully completed. requests_timedout - Number of requests that have timed out. timeout_max - Max allowed timeout timeout_min - Min allowed timeout. * Loopback result files: apbridge_unipro_latency_avg apbridge_unipro_latency_max apbridge_unipro_latency_min gpbridge_firmware_latency_avg gpbridge_firmware_latency_max gpbridge_firmware_latency_min requests_per_second_avg requests_per_second_max requests_per_second_min latency_avg latency_max latency_min throughput_avg throughput_max throughput_min 2 - LOOPBACK TEST APPLICATION The loopback test application manages and formats the results provided by the loopback kernel module. The purpose of this application is to: - Start and manage multiple loopback device tests concurrently. - Calculate the aggregate results for multiple devices. - Gather and format test results (csv or human readable). The best way to get up to date usage information for the application is usually to pass the "-h" parameter. Here is the summary of the available options: Mandatory arguments -t must be one of the test names - sink, transfer or ping -i iteration count - the number of iterations to run the test over Optional arguments -S sysfs location - location for greybus 'endo' entires default /sys/bus/greybus/devices/ -D debugfs location - location for loopback debugfs entries default /sys/kernel/debug/gb_loopback/ -s size of data packet to send during test - defaults to zero -m mask - a bit mask of connections to include example: -m 8 = 4th connection -m 9 = 1st and 4th connection etc default is zero which means broadcast to all connections -v verbose output -d debug output -r raw data output - when specified the full list of latency values are included in the output CSV -p porcelain - when specified printout is in a user-friendly non-CSV format. This option suppresses writing to CSV file -a aggregate - show aggregation of all enabled devies -l list found loopback devices and exit. -x Async - Enable async transfers. -o Timeout - Timeout in microseconds for async operations. 3 - REAL WORLD EXAMPLE USAGES 3.1 - Using the driver sysfs files to run a test on a single device: * Run a 1000 transfers of a 100 byte packet. Each transfer is started only after the previous one finished successfully: echo 0 > /sys/bus/greybus/devices/1-2.17/type echo 0 > /sys/bus/greybus/devices/1-2.17/async echo 2000 > /sys/bus/greybus/devices/1-2.17/us_wait echo 100 > /sys/bus/greybus/devices/1-2.17/size echo 1000 > /sys/bus/greybus/devices/1-2.17/iteration_max echo 0 > /sys/bus/greybus/devices/1-2.17/mask echo 200000 > /sys/bus/greybus/devices/1-2.17/timeout echo 3 > /sys/bus/greybus/devices/1-2.17/type * Run a 1000 transfers of a 100 byte packet. Transfers are started without waiting for the previous one to finish: echo 0 > /sys/bus/greybus/devices/1-2.17/type echo 3 > /sys/bus/greybus/devices/1-2.17/async echo 0 > /sys/bus/greybus/devices/1-2.17/us_wait echo 100 > /sys/bus/greybus/devices/1-2.17/size echo 1000 > /sys/bus/greybus/devices/1-2.17/iteration_max echo 0 > /sys/bus/greybus/devices/1-2.17/mask echo 200000 > /sys/bus/greybus/devices/1-2.17/timeout echo 3 > /sys/bus/greybus/devices/1-2.17/type * Read the results from sysfs: cat /sys/bus/greybus/devices/1-2.17/requests_per_second_min cat /sys/bus/greybus/devices/1-2.17/requests_per_second_max cat /sys/bus/greybus/devices/1-2.17/requests_per_second_avg cat /sys/bus/greybus/devices/1-2.17/latency_min cat /sys/bus/greybus/devices/1-2.17/latency_max cat /sys/bus/greybus/devices/1-2.17/latency_avg cat /sys/bus/greybus/devices/1-2.17/apbridge_unipro_latency_min cat /sys/bus/greybus/devices/1-2.17/apbridge_unipro_latency_max cat /sys/bus/greybus/devices/1-2.17/apbridge_unipro_latency_avg cat /sys/bus/greybus/devices/1-2.17/gpbridge_firmware_latency_min cat /sys/bus/greybus/devices/1-2.17/gpbridge_firmware_latency_max cat /sys/bus/greybus/devices/1-2.17/gpbridge_firmware_latency_avg cat /sys/bus/greybus/devices/1-2.17/error cat /sys/bus/greybus/devices/1-2.17/requests_completed cat /sys/bus/greybus/devices/1-2.17/requests_timedout 3.2 - using the test application: * Run a transfer test 10 iterations of size 100 bytes on all available devices #/loopback_test -t transfer -i 10 -s 100 1970-1-1 0:10:7,transfer,1-4.17,100,10,0,443,509,471.700012,66,1963,2256,2124.600098,293,102776,118088,109318.898438,15312,1620,1998,1894.099976,378,56,57,56.799999,1 1970-1-1 0:10:7,transfer,1-5.17,100,10,0,399,542,463.399994,143,1845,2505,2175.800049,660,92568,125744,107393.296875,33176,1469,2305,1806.500000,836,56,57,56.799999,1 * Show the aggregate results of both devices. ("-a") #/loopback_test -t transfer -i 10 -s 100 -a 1970-1-1 0:10:35,transfer,1-4.17,100,10,0,448,580,494.100006,132,1722,2230,2039.400024,508,103936,134560,114515.703125,30624,1513,1980,1806.900024,467,56,57,57.299999,1 1970-1-1 0:10:35,transfer,1-5.17,100,10,0,383,558,478.600006,175,1791,2606,2115.199951,815,88856,129456,110919.703125,40600,1457,2246,1773.599976,789,56,57,57.099998,1 1970-1-1 0:10:35,transfer,aggregate,100,10,0,383,580,486.000000,197,1722,2606,2077.000000,884,88856,134560,112717.000000,45704,1457,2246,1789.000000,789,56,57,57.000000,1 * Example usage of the mask option to select which devices will run the test (1st, 2nd, or both devices): # /loopback_test -t transfer -i 10 -s 100 -m 1 1970-1-1 0:11:56,transfer,1-4.17,100,10,0,514,558,544.900024,44,1791,1943,1836.599976,152,119248,129456,126301.296875,10208,1600,1001609,101613.601562,1000009,56,57,56.900002,1 # /loopback_test -t transfer -i 10 -s 100 -m 2 1970-1-1 0:12:0,transfer,1-5.17,100,10,0,468,554,539.000000,86,1804,2134,1859.500000,330,108576,128528,124932.500000,19952,1606,1626,1619.300049,20,56,57,57.400002,1 # /loopback_test -t transfer -i 10 -s 100 -m 3 1970-1-1 0:12:3,transfer,1-4.17,100,10,0,432,510,469.399994,78,1959,2313,2135.800049,354,100224,118320,108785.296875,18096,1610,2024,1893.500000,414,56,57,57.200001,1 1970-1-1 0:12:3,transfer,1-5.17,100,10,0,404,542,468.799988,138,1843,2472,2152.500000,629,93728,125744,108646.101562,32016,1504,2247,1853.099976,743,56,57,57.099998,1 * Show output in human readable format ("-p") # /loopback_test -t transfer -i 10 -s 100 -m 3 -p 1970-1-1 0:12:37 test: transfer path: 1-4.17 size: 100 iterations: 10 errors: 0 async: Disabled requests per-sec: min=390, max=547, average=469.299988, jitter=157 ap-throughput B/s: min=90480 max=126904 average=108762.101562 jitter=36424 ap-latency usec: min=1826 max=2560 average=2146.000000 jitter=734 apbridge-latency usec: min=1620 max=1982 average=1882.099976 jitter=362 gpbridge-latency usec: min=56 max=57 average=57.099998 jitter=1 1970-1-1 0:12:37 test: transfer path: 1-5.17 size: 100 iterations: 10 errors: 0 async: Disabled requests per-sec: min=397, max=538, average=461.700012, jitter=141 ap-throughput B/s: min=92104 max=124816 average=106998.898438 jitter=32712 ap-latency usec: min=1856 max=2514 average=2185.699951 jitter=658 apbridge-latency usec: min=1460 max=2296 average=1828.599976 jitter=836 gpbridge-latency usec: min=56 max=57 average=57.099998 jitter=1