linux-stable/drivers/mfd/tps6105x.c
Bill Pemberton 4740f73fe5 mfd: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:22:27 -08:00

247 lines
5.5 KiB
C

/*
* Core driver for TPS61050/61052 boost converters, used for while LED
* driving, audio power amplification, white LED flash, and generic
* boost conversion. Additionally it provides a 1-bit GPIO pin (out or in)
* and a flash synchronization pin to synchronize flash events when used as
* flashgun.
*
* Copyright (C) 2011 ST-Ericsson SA
* Written on behalf of Linaro for ST-Ericsson
*
* Author: Linus Walleij <linus.walleij@linaro.org>
*
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/regulator/driver.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps6105x.h>
int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value)
{
int ret;
ret = mutex_lock_interruptible(&tps6105x->lock);
if (ret)
return ret;
ret = i2c_smbus_write_byte_data(tps6105x->client, reg, value);
mutex_unlock(&tps6105x->lock);
if (ret < 0)
return ret;
return 0;
}
EXPORT_SYMBOL(tps6105x_set);
int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf)
{
int ret;
ret = mutex_lock_interruptible(&tps6105x->lock);
if (ret)
return ret;
ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
mutex_unlock(&tps6105x->lock);
if (ret < 0)
return ret;
*buf = ret;
return 0;
}
EXPORT_SYMBOL(tps6105x_get);
/*
* Masks off the bits in the mask and sets the bits in the bitvalues
* parameter in one atomic operation
*/
int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
u8 bitmask, u8 bitvalues)
{
int ret;
u8 regval;
ret = mutex_lock_interruptible(&tps6105x->lock);
if (ret)
return ret;
ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
if (ret < 0)
goto fail;
regval = ret;
regval = (~bitmask & regval) | (bitmask & bitvalues);
ret = i2c_smbus_write_byte_data(tps6105x->client, reg, regval);
fail:
mutex_unlock(&tps6105x->lock);
if (ret < 0)
return ret;
return 0;
}
EXPORT_SYMBOL(tps6105x_mask_and_set);
static int tps6105x_startup(struct tps6105x *tps6105x)
{
int ret;
u8 regval;
ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
if (ret)
return ret;
switch (regval >> TPS6105X_REG0_MODE_SHIFT) {
case TPS6105X_REG0_MODE_SHUTDOWN:
dev_info(&tps6105x->client->dev,
"TPS6105x found in SHUTDOWN mode\n");
break;
case TPS6105X_REG0_MODE_TORCH:
dev_info(&tps6105x->client->dev,
"TPS6105x found in TORCH mode\n");
break;
case TPS6105X_REG0_MODE_TORCH_FLASH:
dev_info(&tps6105x->client->dev,
"TPS6105x found in FLASH mode\n");
break;
case TPS6105X_REG0_MODE_VOLTAGE:
dev_info(&tps6105x->client->dev,
"TPS6105x found in VOLTAGE mode\n");
break;
default:
break;
}
return ret;
}
/*
* MFD cells - we have one cell which is selected operation
* mode, and we always have a GPIO cell.
*/
static struct mfd_cell tps6105x_cells[] = {
{
/* name will be runtime assigned */
.id = -1,
},
{
.name = "tps6105x-gpio",
.id = -1,
},
};
static int tps6105x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tps6105x *tps6105x;
struct tps6105x_platform_data *pdata;
int ret;
int i;
tps6105x = kmalloc(sizeof(*tps6105x), GFP_KERNEL);
if (!tps6105x)
return -ENOMEM;
i2c_set_clientdata(client, tps6105x);
tps6105x->client = client;
pdata = client->dev.platform_data;
tps6105x->pdata = pdata;
mutex_init(&tps6105x->lock);
ret = tps6105x_startup(tps6105x);
if (ret) {
dev_err(&client->dev, "chip initialization failed\n");
goto fail;
}
/* Remove warning texts when you implement new cell drivers */
switch (pdata->mode) {
case TPS6105X_MODE_SHUTDOWN:
dev_info(&client->dev,
"present, not used for anything, only GPIO\n");
break;
case TPS6105X_MODE_TORCH:
tps6105x_cells[0].name = "tps6105x-leds";
dev_warn(&client->dev,
"torch mode is unsupported\n");
break;
case TPS6105X_MODE_TORCH_FLASH:
tps6105x_cells[0].name = "tps6105x-flash";
dev_warn(&client->dev,
"flash mode is unsupported\n");
break;
case TPS6105X_MODE_VOLTAGE:
tps6105x_cells[0].name ="tps6105x-regulator";
break;
default:
break;
}
/* Set up and register the platform devices. */
for (i = 0; i < ARRAY_SIZE(tps6105x_cells); i++) {
/* One state holder for all drivers, this is simple */
tps6105x_cells[i].platform_data = tps6105x;
tps6105x_cells[i].pdata_size = sizeof(*tps6105x);
}
ret = mfd_add_devices(&client->dev, 0, tps6105x_cells,
ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL);
if (ret)
goto fail;
return 0;
fail:
kfree(tps6105x);
return ret;
}
static int tps6105x_remove(struct i2c_client *client)
{
struct tps6105x *tps6105x = i2c_get_clientdata(client);
mfd_remove_devices(&client->dev);
/* Put chip in shutdown mode */
tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
TPS6105X_REG0_MODE_MASK,
TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
kfree(tps6105x);
return 0;
}
static const struct i2c_device_id tps6105x_id[] = {
{ "tps61050", 0 },
{ "tps61052", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tps6105x_id);
static struct i2c_driver tps6105x_driver = {
.driver = {
.name = "tps6105x",
},
.probe = tps6105x_probe,
.remove = tps6105x_remove,
.id_table = tps6105x_id,
};
static int __init tps6105x_init(void)
{
return i2c_add_driver(&tps6105x_driver);
}
subsys_initcall(tps6105x_init);
static void __exit tps6105x_exit(void)
{
i2c_del_driver(&tps6105x_driver);
}
module_exit(tps6105x_exit);
MODULE_AUTHOR("Linus Walleij");
MODULE_DESCRIPTION("TPS6105x White LED Boost Converter Driver");
MODULE_LICENSE("GPL v2");