mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 11:19:37 +00:00
![Bartlomiej Zolnierkiewicz](/assets/img/avatar_default.png)
This patch fixes host drivers to use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable. Benefits of this change: * unused code is not being compiled in for CONFIG_PM=y, CONFIG_PM_SLEEP=n and CONFIG_PM_RUNTIME=y configurations * easier transition to use struct dev_pm_ops and SIMPLE_DEV_PM_OPS() in the future * more consistent code (there are host drivers which are using the correct CONFIG_PM_SLEEP checks already) The patch leaves the core libata code and ->port_[suspend,resume] support in sata_[inic162x,nv,sil24].c alone for now. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
238 lines
6.9 KiB
C
238 lines
6.9 KiB
C
/*
|
|
* pata_mpiix.c - Intel MPIIX PATA for new ATA layer
|
|
* (C) 2005-2006 Red Hat Inc
|
|
* Alan Cox <alan@lxorguk.ukuu.org.uk>
|
|
*
|
|
* The MPIIX is different enough to the PIIX4 and friends that we give it
|
|
* a separate driver. The old ide/pci code handles this by just not tuning
|
|
* MPIIX at all.
|
|
*
|
|
* The MPIIX also differs in another important way from the majority of PIIX
|
|
* devices. The chip is a bridge (pardon the pun) between the old world of
|
|
* ISA IDE and PCI IDE. Although the ATA timings are PCI configured the actual
|
|
* IDE controller is not decoded in PCI space and the chip does not claim to
|
|
* be IDE class PCI. This requires slightly non-standard probe logic compared
|
|
* with PCI IDE and also that we do not disable the device when our driver is
|
|
* unloaded (as it has many other functions).
|
|
*
|
|
* The driver consciously keeps this logic internally to avoid pushing quirky
|
|
* PATA history into the clean libata layer.
|
|
*
|
|
* Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
|
|
* hard disk present this driver will not detect it. This is not a bug. In this
|
|
* configuration the secondary port of the MPIIX is disabled and the addresses
|
|
* are decoded by the PCMCIA bridge and therefore are for a generic IDE driver
|
|
* to operate.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_mpiix"
|
|
#define DRV_VERSION "0.7.7"
|
|
|
|
enum {
|
|
IDETIM = 0x6C, /* IDE control register */
|
|
IORDY = (1 << 1),
|
|
PPE = (1 << 2),
|
|
FTIM = (1 << 0),
|
|
ENABLED = (1 << 15),
|
|
SECONDARY = (1 << 14)
|
|
};
|
|
|
|
static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static const struct pci_bits mpiix_enable_bits = { 0x6D, 1, 0x80, 0x80 };
|
|
|
|
if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
|
|
return -ENOENT;
|
|
|
|
return ata_sff_prereset(link, deadline);
|
|
}
|
|
|
|
/**
|
|
* mpiix_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the PIO mode setup. The MPIIX allows us to program the
|
|
* IORDY sample point (2-5 clocks), recovery (1-4 clocks) and whether
|
|
* prefetching or IORDY are used.
|
|
*
|
|
* This would get very ugly because we can only program timing for one
|
|
* device at a time, the other gets PIO0. Fortunately libata calls
|
|
* our qc_issue command before a command is issued so we can flip the
|
|
* timings back and forth to reduce the pain.
|
|
*/
|
|
|
|
static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
int control = 0;
|
|
int pio = adev->pio_mode - XFER_PIO_0;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u16 idetim;
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
pci_read_config_word(pdev, IDETIM, &idetim);
|
|
|
|
/* Mask the IORDY/TIME/PPE for this device */
|
|
if (adev->class == ATA_DEV_ATA)
|
|
control |= PPE; /* Enable prefetch/posting for disk */
|
|
if (ata_pio_need_iordy(adev))
|
|
control |= IORDY;
|
|
if (pio > 1)
|
|
control |= FTIM; /* This drive is on the fast timing bank */
|
|
|
|
/* Mask out timing and clear both TIME bank selects */
|
|
idetim &= 0xCCEE;
|
|
idetim &= ~(0x07 << (4 * adev->devno));
|
|
idetim |= control << (4 * adev->devno);
|
|
|
|
idetim |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
|
pci_write_config_word(pdev, IDETIM, idetim);
|
|
|
|
/* We use ap->private_data as a pointer to the device currently
|
|
loaded for timing */
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* mpiix_qc_issue - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings if
|
|
* necessary. Our logic also clears TIME0/TIME1 for the other device so
|
|
* that, even if we get this wrong, cycles to the other device will
|
|
* be made PIO0.
|
|
*/
|
|
|
|
static unsigned int mpiix_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
|
|
/* If modes have been configured and the channel data is not loaded
|
|
then load it. We have to check if pio_mode is set as the core code
|
|
does not set adev->pio_mode to XFER_PIO_0 while probing as would be
|
|
logical */
|
|
|
|
if (adev->pio_mode && adev != ap->private_data)
|
|
mpiix_set_piomode(ap, adev);
|
|
|
|
return ata_sff_qc_issue(qc);
|
|
}
|
|
|
|
static struct scsi_host_template mpiix_sht = {
|
|
ATA_PIO_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations mpiix_port_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
.qc_issue = mpiix_qc_issue,
|
|
.cable_detect = ata_cable_40wire,
|
|
.set_piomode = mpiix_set_piomode,
|
|
.prereset = mpiix_pre_reset,
|
|
.sff_data_xfer = ata_sff_data_xfer32,
|
|
};
|
|
|
|
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
/* Single threaded by the PCI probe logic */
|
|
struct ata_host *host;
|
|
struct ata_port *ap;
|
|
void __iomem *cmd_addr, *ctl_addr;
|
|
u16 idetim;
|
|
int cmd, ctl, irq;
|
|
|
|
ata_print_version_once(&dev->dev, DRV_VERSION);
|
|
|
|
host = ata_host_alloc(&dev->dev, 1);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
ap = host->ports[0];
|
|
|
|
/* MPIIX has many functions which can be turned on or off according
|
|
to other devices present. Make sure IDE is enabled before we try
|
|
and use it */
|
|
|
|
pci_read_config_word(dev, IDETIM, &idetim);
|
|
if (!(idetim & ENABLED))
|
|
return -ENODEV;
|
|
|
|
/* See if it's primary or secondary channel... */
|
|
if (!(idetim & SECONDARY)) {
|
|
cmd = 0x1F0;
|
|
ctl = 0x3F6;
|
|
irq = 14;
|
|
} else {
|
|
cmd = 0x170;
|
|
ctl = 0x376;
|
|
irq = 15;
|
|
}
|
|
|
|
cmd_addr = devm_ioport_map(&dev->dev, cmd, 8);
|
|
ctl_addr = devm_ioport_map(&dev->dev, ctl, 1);
|
|
if (!cmd_addr || !ctl_addr)
|
|
return -ENOMEM;
|
|
|
|
ata_port_desc(ap, "cmd 0x%x ctl 0x%x", cmd, ctl);
|
|
|
|
/* We do our own plumbing to avoid leaking special cases for whacko
|
|
ancient hardware into the core code. There are two issues to
|
|
worry about. #1 The chip is a bridge so if in legacy mode and
|
|
without BARs set fools the setup. #2 If you pci_disable_device
|
|
the MPIIX your box goes castors up */
|
|
|
|
ap->ops = &mpiix_port_ops;
|
|
ap->pio_mask = ATA_PIO4;
|
|
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
|
|
|
ap->ioaddr.cmd_addr = cmd_addr;
|
|
ap->ioaddr.ctl_addr = ctl_addr;
|
|
ap->ioaddr.altstatus_addr = ctl_addr;
|
|
|
|
/* Let libata fill in the port details */
|
|
ata_sff_std_ports(&ap->ioaddr);
|
|
|
|
/* activate host */
|
|
return ata_host_activate(host, irq, ata_sff_interrupt, IRQF_SHARED,
|
|
&mpiix_sht);
|
|
}
|
|
|
|
static const struct pci_device_id mpiix[] = {
|
|
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver mpiix_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = mpiix,
|
|
.probe = mpiix_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(mpiix_pci_driver);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for Intel MPIIX");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, mpiix);
|
|
MODULE_VERSION(DRV_VERSION);
|