mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-29 23:53:32 +00:00
e952849a02
This patch fix some typos found in a printk message and MODULE_DESCRIPTION. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
740 lines
19 KiB
C
740 lines
19 KiB
C
/*
|
|
* Blackfin On-Chip Two Wire Interface Driver
|
|
*
|
|
* Copyright 2005-2007 Analog Devices Inc.
|
|
*
|
|
* Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c/bfin_twi.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/bfin_twi.h>
|
|
|
|
/* SMBus mode*/
|
|
#define TWI_I2C_MODE_STANDARD 1
|
|
#define TWI_I2C_MODE_STANDARDSUB 2
|
|
#define TWI_I2C_MODE_COMBINED 3
|
|
#define TWI_I2C_MODE_REPEAT 4
|
|
|
|
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
|
|
unsigned short twi_int_status)
|
|
{
|
|
unsigned short mast_stat = read_MASTER_STAT(iface);
|
|
|
|
if (twi_int_status & XMTSERV) {
|
|
if (iface->writeNum <= 0) {
|
|
/* start receive immediately after complete sending in
|
|
* combine mode.
|
|
*/
|
|
if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | MDIR);
|
|
else if (iface->manual_stop)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | STOP);
|
|
else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
|
|
iface->cur_msg + 1 < iface->msg_num) {
|
|
if (iface->pmsg[iface->cur_msg + 1].flags &
|
|
I2C_M_RD)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) |
|
|
MDIR);
|
|
else
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) &
|
|
~MDIR);
|
|
}
|
|
}
|
|
/* Transmit next data */
|
|
while (iface->writeNum > 0 &&
|
|
(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
|
|
write_XMT_DATA8(iface, *(iface->transPtr++));
|
|
iface->writeNum--;
|
|
}
|
|
}
|
|
if (twi_int_status & RCVSERV) {
|
|
while (iface->readNum > 0 &&
|
|
(read_FIFO_STAT(iface) & RCVSTAT)) {
|
|
/* Receive next data */
|
|
*(iface->transPtr) = read_RCV_DATA8(iface);
|
|
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
|
|
/* Change combine mode into sub mode after
|
|
* read first data.
|
|
*/
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
/* Get read number from first byte in block
|
|
* combine mode.
|
|
*/
|
|
if (iface->readNum == 1 && iface->manual_stop)
|
|
iface->readNum = *iface->transPtr + 1;
|
|
}
|
|
iface->transPtr++;
|
|
iface->readNum--;
|
|
}
|
|
|
|
if (iface->readNum == 0) {
|
|
if (iface->manual_stop) {
|
|
/* Temporary workaround to avoid possible bus stall -
|
|
* Flush FIFO before issuing the STOP condition
|
|
*/
|
|
read_RCV_DATA16(iface);
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | STOP);
|
|
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
|
|
iface->cur_msg + 1 < iface->msg_num) {
|
|
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | MDIR);
|
|
else
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) & ~MDIR);
|
|
}
|
|
}
|
|
}
|
|
if (twi_int_status & MERR) {
|
|
write_INT_MASK(iface, 0);
|
|
write_MASTER_STAT(iface, 0x3e);
|
|
write_MASTER_CTL(iface, 0);
|
|
iface->result = -EIO;
|
|
|
|
if (mast_stat & LOSTARB)
|
|
dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
|
|
if (mast_stat & ANAK)
|
|
dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
|
|
if (mast_stat & DNAK)
|
|
dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
|
|
if (mast_stat & BUFRDERR)
|
|
dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
|
|
if (mast_stat & BUFWRERR)
|
|
dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
|
|
|
|
/* Faulty slave devices, may drive SDA low after a transfer
|
|
* finishes. To release the bus this code generates up to 9
|
|
* extra clocks until SDA is released.
|
|
*/
|
|
|
|
if (read_MASTER_STAT(iface) & SDASEN) {
|
|
int cnt = 9;
|
|
do {
|
|
write_MASTER_CTL(iface, SCLOVR);
|
|
udelay(6);
|
|
write_MASTER_CTL(iface, 0);
|
|
udelay(6);
|
|
} while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
|
|
|
|
write_MASTER_CTL(iface, SDAOVR | SCLOVR);
|
|
udelay(6);
|
|
write_MASTER_CTL(iface, SDAOVR);
|
|
udelay(6);
|
|
write_MASTER_CTL(iface, 0);
|
|
}
|
|
|
|
/* If it is a quick transfer, only address without data,
|
|
* not an err, return 1.
|
|
*/
|
|
if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
|
|
iface->transPtr == NULL &&
|
|
(twi_int_status & MCOMP) && (mast_stat & DNAK))
|
|
iface->result = 1;
|
|
|
|
complete(&iface->complete);
|
|
return;
|
|
}
|
|
if (twi_int_status & MCOMP) {
|
|
if (twi_int_status & (XMTSERV | RCVSERV) &&
|
|
(read_MASTER_CTL(iface) & MEN) == 0 &&
|
|
(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
|
|
iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
|
|
iface->result = -1;
|
|
write_INT_MASK(iface, 0);
|
|
write_MASTER_CTL(iface, 0);
|
|
} else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
|
|
if (iface->readNum == 0) {
|
|
/* set the read number to 1 and ask for manual
|
|
* stop in block combine mode
|
|
*/
|
|
iface->readNum = 1;
|
|
iface->manual_stop = 1;
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | (0xff << 6));
|
|
} else {
|
|
/* set the readd number in other
|
|
* combine mode.
|
|
*/
|
|
write_MASTER_CTL(iface,
|
|
(read_MASTER_CTL(iface) &
|
|
(~(0xff << 6))) |
|
|
(iface->readNum << 6));
|
|
}
|
|
/* remove restart bit and enable master receive */
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) & ~RSTART);
|
|
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
|
|
iface->cur_msg + 1 < iface->msg_num) {
|
|
iface->cur_msg++;
|
|
iface->transPtr = iface->pmsg[iface->cur_msg].buf;
|
|
iface->writeNum = iface->readNum =
|
|
iface->pmsg[iface->cur_msg].len;
|
|
/* Set Transmit device address */
|
|
write_MASTER_ADDR(iface,
|
|
iface->pmsg[iface->cur_msg].addr);
|
|
if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
|
|
iface->read_write = I2C_SMBUS_READ;
|
|
else {
|
|
iface->read_write = I2C_SMBUS_WRITE;
|
|
/* Transmit first data */
|
|
if (iface->writeNum > 0) {
|
|
write_XMT_DATA8(iface,
|
|
*(iface->transPtr++));
|
|
iface->writeNum--;
|
|
}
|
|
}
|
|
|
|
if (iface->pmsg[iface->cur_msg].len <= 255) {
|
|
write_MASTER_CTL(iface,
|
|
(read_MASTER_CTL(iface) &
|
|
(~(0xff << 6))) |
|
|
(iface->pmsg[iface->cur_msg].len << 6));
|
|
iface->manual_stop = 0;
|
|
} else {
|
|
write_MASTER_CTL(iface,
|
|
(read_MASTER_CTL(iface) |
|
|
(0xff << 6)));
|
|
iface->manual_stop = 1;
|
|
}
|
|
/* remove restart bit before last message */
|
|
if (iface->cur_msg + 1 == iface->msg_num)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) & ~RSTART);
|
|
} else {
|
|
iface->result = 1;
|
|
write_INT_MASK(iface, 0);
|
|
write_MASTER_CTL(iface, 0);
|
|
}
|
|
complete(&iface->complete);
|
|
}
|
|
}
|
|
|
|
/* Interrupt handler */
|
|
static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
|
|
{
|
|
struct bfin_twi_iface *iface = dev_id;
|
|
unsigned long flags;
|
|
unsigned short twi_int_status;
|
|
|
|
spin_lock_irqsave(&iface->lock, flags);
|
|
while (1) {
|
|
twi_int_status = read_INT_STAT(iface);
|
|
if (!twi_int_status)
|
|
break;
|
|
/* Clear interrupt status */
|
|
write_INT_STAT(iface, twi_int_status);
|
|
bfin_twi_handle_interrupt(iface, twi_int_status);
|
|
}
|
|
spin_unlock_irqrestore(&iface->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* One i2c master transfer
|
|
*/
|
|
static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct bfin_twi_iface *iface = adap->algo_data;
|
|
struct i2c_msg *pmsg;
|
|
int rc = 0;
|
|
|
|
if (!(read_CONTROL(iface) & TWI_ENA))
|
|
return -ENXIO;
|
|
|
|
if (read_MASTER_STAT(iface) & BUSBUSY)
|
|
return -EAGAIN;
|
|
|
|
iface->pmsg = msgs;
|
|
iface->msg_num = num;
|
|
iface->cur_msg = 0;
|
|
|
|
pmsg = &msgs[0];
|
|
if (pmsg->flags & I2C_M_TEN) {
|
|
dev_err(&adap->dev, "10 bits addr not supported!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (iface->msg_num > 1)
|
|
iface->cur_mode = TWI_I2C_MODE_REPEAT;
|
|
iface->manual_stop = 0;
|
|
iface->transPtr = pmsg->buf;
|
|
iface->writeNum = iface->readNum = pmsg->len;
|
|
iface->result = 0;
|
|
init_completion(&(iface->complete));
|
|
/* Set Transmit device address */
|
|
write_MASTER_ADDR(iface, pmsg->addr);
|
|
|
|
/* FIFO Initiation. Data in FIFO should be
|
|
* discarded before start a new operation.
|
|
*/
|
|
write_FIFO_CTL(iface, 0x3);
|
|
write_FIFO_CTL(iface, 0);
|
|
|
|
if (pmsg->flags & I2C_M_RD)
|
|
iface->read_write = I2C_SMBUS_READ;
|
|
else {
|
|
iface->read_write = I2C_SMBUS_WRITE;
|
|
/* Transmit first data */
|
|
if (iface->writeNum > 0) {
|
|
write_XMT_DATA8(iface, *(iface->transPtr++));
|
|
iface->writeNum--;
|
|
}
|
|
}
|
|
|
|
/* clear int stat */
|
|
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
|
|
|
|
/* Interrupt mask . Enable XMT, RCV interrupt */
|
|
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
|
|
|
|
if (pmsg->len <= 255)
|
|
write_MASTER_CTL(iface, pmsg->len << 6);
|
|
else {
|
|
write_MASTER_CTL(iface, 0xff << 6);
|
|
iface->manual_stop = 1;
|
|
}
|
|
|
|
/* Master enable */
|
|
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
|
|
(iface->msg_num > 1 ? RSTART : 0) |
|
|
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
|
|
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
|
|
|
|
while (!iface->result) {
|
|
if (!wait_for_completion_timeout(&iface->complete,
|
|
adap->timeout)) {
|
|
iface->result = -1;
|
|
dev_err(&adap->dev, "master transfer timeout\n");
|
|
}
|
|
}
|
|
|
|
if (iface->result == 1)
|
|
rc = iface->cur_msg + 1;
|
|
else
|
|
rc = iface->result;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Generic i2c master transfer entrypoint
|
|
*/
|
|
static int bfin_twi_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
return bfin_twi_do_master_xfer(adap, msgs, num);
|
|
}
|
|
|
|
/*
|
|
* One I2C SMBus transfer
|
|
*/
|
|
int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write,
|
|
u8 command, int size, union i2c_smbus_data *data)
|
|
{
|
|
struct bfin_twi_iface *iface = adap->algo_data;
|
|
int rc = 0;
|
|
|
|
if (!(read_CONTROL(iface) & TWI_ENA))
|
|
return -ENXIO;
|
|
|
|
if (read_MASTER_STAT(iface) & BUSBUSY)
|
|
return -EAGAIN;
|
|
|
|
iface->writeNum = 0;
|
|
iface->readNum = 0;
|
|
|
|
/* Prepare datas & select mode */
|
|
switch (size) {
|
|
case I2C_SMBUS_QUICK:
|
|
iface->transPtr = NULL;
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARD;
|
|
break;
|
|
case I2C_SMBUS_BYTE:
|
|
if (data == NULL)
|
|
iface->transPtr = NULL;
|
|
else {
|
|
if (read_write == I2C_SMBUS_READ)
|
|
iface->readNum = 1;
|
|
else
|
|
iface->writeNum = 1;
|
|
iface->transPtr = &data->byte;
|
|
}
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARD;
|
|
break;
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
iface->readNum = 1;
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
} else {
|
|
iface->writeNum = 1;
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
}
|
|
iface->transPtr = &data->byte;
|
|
break;
|
|
case I2C_SMBUS_WORD_DATA:
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
iface->readNum = 2;
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
} else {
|
|
iface->writeNum = 2;
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
}
|
|
iface->transPtr = (u8 *)&data->word;
|
|
break;
|
|
case I2C_SMBUS_PROC_CALL:
|
|
iface->writeNum = 2;
|
|
iface->readNum = 2;
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
iface->transPtr = (u8 *)&data->word;
|
|
break;
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
iface->readNum = 0;
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
} else {
|
|
iface->writeNum = data->block[0] + 1;
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
}
|
|
iface->transPtr = data->block;
|
|
break;
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
iface->readNum = data->block[0];
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
} else {
|
|
iface->writeNum = data->block[0];
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
}
|
|
iface->transPtr = (u8 *)&data->block[1];
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
iface->result = 0;
|
|
iface->manual_stop = 0;
|
|
iface->read_write = read_write;
|
|
iface->command = command;
|
|
init_completion(&(iface->complete));
|
|
|
|
/* FIFO Initiation. Data in FIFO should be discarded before
|
|
* start a new operation.
|
|
*/
|
|
write_FIFO_CTL(iface, 0x3);
|
|
write_FIFO_CTL(iface, 0);
|
|
|
|
/* clear int stat */
|
|
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
|
|
|
|
/* Set Transmit device address */
|
|
write_MASTER_ADDR(iface, addr);
|
|
|
|
switch (iface->cur_mode) {
|
|
case TWI_I2C_MODE_STANDARDSUB:
|
|
write_XMT_DATA8(iface, iface->command);
|
|
write_INT_MASK(iface, MCOMP | MERR |
|
|
((iface->read_write == I2C_SMBUS_READ) ?
|
|
RCVSERV : XMTSERV));
|
|
|
|
if (iface->writeNum + 1 <= 255)
|
|
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
|
|
else {
|
|
write_MASTER_CTL(iface, 0xff << 6);
|
|
iface->manual_stop = 1;
|
|
}
|
|
/* Master enable */
|
|
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
|
|
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
|
|
break;
|
|
case TWI_I2C_MODE_COMBINED:
|
|
write_XMT_DATA8(iface, iface->command);
|
|
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
|
|
|
|
if (iface->writeNum > 0)
|
|
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
|
|
else
|
|
write_MASTER_CTL(iface, 0x1 << 6);
|
|
/* Master enable */
|
|
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
|
|
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
|
|
break;
|
|
default:
|
|
write_MASTER_CTL(iface, 0);
|
|
if (size != I2C_SMBUS_QUICK) {
|
|
/* Don't access xmit data register when this is a
|
|
* read operation.
|
|
*/
|
|
if (iface->read_write != I2C_SMBUS_READ) {
|
|
if (iface->writeNum > 0) {
|
|
write_XMT_DATA8(iface,
|
|
*(iface->transPtr++));
|
|
if (iface->writeNum <= 255)
|
|
write_MASTER_CTL(iface,
|
|
iface->writeNum << 6);
|
|
else {
|
|
write_MASTER_CTL(iface,
|
|
0xff << 6);
|
|
iface->manual_stop = 1;
|
|
}
|
|
iface->writeNum--;
|
|
} else {
|
|
write_XMT_DATA8(iface, iface->command);
|
|
write_MASTER_CTL(iface, 1 << 6);
|
|
}
|
|
} else {
|
|
if (iface->readNum > 0 && iface->readNum <= 255)
|
|
write_MASTER_CTL(iface,
|
|
iface->readNum << 6);
|
|
else if (iface->readNum > 255) {
|
|
write_MASTER_CTL(iface, 0xff << 6);
|
|
iface->manual_stop = 1;
|
|
} else
|
|
break;
|
|
}
|
|
}
|
|
write_INT_MASK(iface, MCOMP | MERR |
|
|
((iface->read_write == I2C_SMBUS_READ) ?
|
|
RCVSERV : XMTSERV));
|
|
|
|
/* Master enable */
|
|
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
|
|
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
|
|
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
|
|
break;
|
|
}
|
|
|
|
while (!iface->result) {
|
|
if (!wait_for_completion_timeout(&iface->complete,
|
|
adap->timeout)) {
|
|
iface->result = -1;
|
|
dev_err(&adap->dev, "smbus transfer timeout\n");
|
|
}
|
|
}
|
|
|
|
rc = (iface->result >= 0) ? 0 : -1;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Generic I2C SMBus transfer entrypoint
|
|
*/
|
|
int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write,
|
|
u8 command, int size, union i2c_smbus_data *data)
|
|
{
|
|
return bfin_twi_do_smbus_xfer(adap, addr, flags,
|
|
read_write, command, size, data);
|
|
}
|
|
|
|
/*
|
|
* Return what the adapter supports
|
|
*/
|
|
static u32 bfin_twi_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
|
|
I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
|
|
}
|
|
|
|
static struct i2c_algorithm bfin_twi_algorithm = {
|
|
.master_xfer = bfin_twi_master_xfer,
|
|
.smbus_xfer = bfin_twi_smbus_xfer,
|
|
.functionality = bfin_twi_functionality,
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int i2c_bfin_twi_suspend(struct device *dev)
|
|
{
|
|
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
|
|
|
|
iface->saved_clkdiv = read_CLKDIV(iface);
|
|
iface->saved_control = read_CONTROL(iface);
|
|
|
|
free_irq(iface->irq, iface);
|
|
|
|
/* Disable TWI */
|
|
write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_bfin_twi_resume(struct device *dev)
|
|
{
|
|
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
|
|
|
|
int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
|
|
0, to_platform_device(dev)->name, iface);
|
|
if (rc) {
|
|
dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Resume TWI interface clock as specified */
|
|
write_CLKDIV(iface, iface->saved_clkdiv);
|
|
|
|
/* Resume TWI */
|
|
write_CONTROL(iface, iface->saved_control);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
|
|
i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
|
|
#define I2C_BFIN_TWI_PM_OPS (&i2c_bfin_twi_pm)
|
|
#else
|
|
#define I2C_BFIN_TWI_PM_OPS NULL
|
|
#endif
|
|
|
|
static int i2c_bfin_twi_probe(struct platform_device *pdev)
|
|
{
|
|
struct bfin_twi_iface *iface;
|
|
struct i2c_adapter *p_adap;
|
|
struct resource *res;
|
|
int rc;
|
|
unsigned int clkhilow;
|
|
|
|
iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
|
|
GFP_KERNEL);
|
|
if (!iface) {
|
|
dev_err(&pdev->dev, "Cannot allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spin_lock_init(&(iface->lock));
|
|
|
|
/* Find and map our resources */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(iface->regs_base)) {
|
|
dev_err(&pdev->dev, "Cannot map IO\n");
|
|
return PTR_ERR(iface->regs_base);
|
|
}
|
|
|
|
iface->irq = platform_get_irq(pdev, 0);
|
|
if (iface->irq < 0) {
|
|
dev_err(&pdev->dev, "No IRQ specified\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
p_adap = &iface->adap;
|
|
p_adap->nr = pdev->id;
|
|
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
|
|
p_adap->algo = &bfin_twi_algorithm;
|
|
p_adap->algo_data = iface;
|
|
p_adap->class = I2C_CLASS_DEPRECATED;
|
|
p_adap->dev.parent = &pdev->dev;
|
|
p_adap->timeout = 5 * HZ;
|
|
p_adap->retries = 3;
|
|
|
|
rc = peripheral_request_list(
|
|
dev_get_platdata(&pdev->dev),
|
|
"i2c-bfin-twi");
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "Can't setup pin mux!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
|
|
0, pdev->name, iface);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
|
|
rc = -ENODEV;
|
|
goto out_error;
|
|
}
|
|
|
|
/* Set TWI internal clock as 10MHz */
|
|
write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
|
|
|
|
/*
|
|
* We will not end up with a CLKDIV=0 because no one will specify
|
|
* 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
|
|
*/
|
|
clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
|
|
|
|
/* Set Twi interface clock as specified */
|
|
write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
|
|
|
|
/* Enable TWI */
|
|
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
|
|
|
|
rc = i2c_add_numbered_adapter(p_adap);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "Can't add i2c adapter!\n");
|
|
goto out_error;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, iface);
|
|
|
|
dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Controller, "
|
|
"regs_base@%p\n", iface->regs_base);
|
|
|
|
return 0;
|
|
|
|
out_error:
|
|
peripheral_free_list(dev_get_platdata(&pdev->dev));
|
|
return rc;
|
|
}
|
|
|
|
static int i2c_bfin_twi_remove(struct platform_device *pdev)
|
|
{
|
|
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&(iface->adap));
|
|
peripheral_free_list(dev_get_platdata(&pdev->dev));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver i2c_bfin_twi_driver = {
|
|
.probe = i2c_bfin_twi_probe,
|
|
.remove = i2c_bfin_twi_remove,
|
|
.driver = {
|
|
.name = "i2c-bfin-twi",
|
|
.pm = I2C_BFIN_TWI_PM_OPS,
|
|
},
|
|
};
|
|
|
|
static int __init i2c_bfin_twi_init(void)
|
|
{
|
|
return platform_driver_register(&i2c_bfin_twi_driver);
|
|
}
|
|
|
|
static void __exit i2c_bfin_twi_exit(void)
|
|
{
|
|
platform_driver_unregister(&i2c_bfin_twi_driver);
|
|
}
|
|
|
|
subsys_initcall(i2c_bfin_twi_init);
|
|
module_exit(i2c_bfin_twi_exit);
|
|
|
|
MODULE_AUTHOR("Bryan Wu, Sonic Zhang");
|
|
MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Controller Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:i2c-bfin-twi");
|