mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
![Ralf Baechle](/assets/img/avatar_default.png)
The kernel has used a stale email address of Andreas for a few years. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
175 lines
7.8 KiB
Text
175 lines
7.8 KiB
Text
This is the 6pack-mini-HOWTO, written by
|
|
|
|
Andreas Könsgen DG3KQ
|
|
Internet: ajk@comnets.uni-bremen.de
|
|
AMPR-net: dg3kq@db0pra.ampr.org
|
|
AX.25: dg3kq@db0ach.#nrw.deu.eu
|
|
|
|
Last update: April 7, 1998
|
|
|
|
1. What is 6pack, and what are the advantages to KISS?
|
|
|
|
6pack is a transmission protocol for data exchange between the PC and
|
|
the TNC over a serial line. It can be used as an alternative to KISS.
|
|
|
|
6pack has two major advantages:
|
|
- The PC is given full control over the radio
|
|
channel. Special control data is exchanged between the PC and the TNC so
|
|
that the PC knows at any time if the TNC is receiving data, if a TNC
|
|
buffer underrun or overrun has occurred, if the PTT is
|
|
set and so on. This control data is processed at a higher priority than
|
|
normal data, so a data stream can be interrupted at any time to issue an
|
|
important event. This helps to improve the channel access and timing
|
|
algorithms as everything is computed in the PC. It would even be possible
|
|
to experiment with something completely different from the known CSMA and
|
|
DAMA channel access methods.
|
|
This kind of real-time control is especially important to supply several
|
|
TNCs that are connected between each other and the PC by a daisy chain
|
|
(however, this feature is not supported yet by the Linux 6pack driver).
|
|
|
|
- Each packet transferred over the serial line is supplied with a checksum,
|
|
so it is easy to detect errors due to problems on the serial line.
|
|
Received packets that are corrupt are not passed on to the AX.25 layer.
|
|
Damaged packets that the TNC has received from the PC are not transmitted.
|
|
|
|
More details about 6pack are described in the file 6pack.ps that is located
|
|
in the doc directory of the AX.25 utilities package.
|
|
|
|
2. Who has developed the 6pack protocol?
|
|
|
|
The 6pack protocol has been developed by Ekki Plicht DF4OR, Henning Rech
|
|
DF9IC and Gunter Jost DK7WJ. A driver for 6pack, written by Gunter Jost and
|
|
Matthias Welwarsky DG2FEF, comes along with the PC version of FlexNet.
|
|
They have also written a firmware for TNCs to perform the 6pack
|
|
protocol (see section 4 below).
|
|
|
|
3. Where can I get the latest version of 6pack for LinuX?
|
|
|
|
At the moment, the 6pack stuff can obtained via anonymous ftp from
|
|
db0bm.automation.fh-aachen.de. In the directory /incoming/dg3kq,
|
|
there is a file named 6pack.tgz.
|
|
|
|
4. Preparing the TNC for 6pack operation
|
|
|
|
To be able to use 6pack, a special firmware for the TNC is needed. The EPROM
|
|
of a newly bought TNC does not contain 6pack, so you will have to
|
|
program an EPROM yourself. The image file for 6pack EPROMs should be
|
|
available on any packet radio box where PC/FlexNet can be found. The name of
|
|
the file is 6pack.bin. This file is copyrighted and maintained by the FlexNet
|
|
team. It can be used under the terms of the license that comes along
|
|
with PC/FlexNet. Please do not ask me about the internals of this file as I
|
|
don't know anything about it. I used a textual description of the 6pack
|
|
protocol to program the Linux driver.
|
|
|
|
TNCs contain a 64kByte EPROM, the lower half of which is used for
|
|
the firmware/KISS. The upper half is either empty or is sometimes
|
|
programmed with software called TAPR. In the latter case, the TNC
|
|
is supplied with a DIP switch so you can easily change between the
|
|
two systems. When programming a new EPROM, one of the systems is replaced
|
|
by 6pack. It is useful to replace TAPR, as this software is rarely used
|
|
nowadays. If your TNC is not equipped with the switch mentioned above, you
|
|
can build in one yourself that switches over the highest address pin
|
|
of the EPROM between HIGH and LOW level. After having inserted the new EPROM
|
|
and switched to 6pack, apply power to the TNC for a first test. The connect
|
|
and the status LED are lit for about a second if the firmware initialises
|
|
the TNC correctly.
|
|
|
|
5. Building and installing the 6pack driver
|
|
|
|
The driver has been tested with kernel version 2.1.90. Use with older
|
|
kernels may lead to a compilation error because the interface to a kernel
|
|
function has been changed in the 2.1.8x kernels.
|
|
|
|
How to turn on 6pack support:
|
|
|
|
- In the linux kernel configuration program, select the code maturity level
|
|
options menu and turn on the prompting for development drivers.
|
|
|
|
- Select the amateur radio support menu and turn on the serial port 6pack
|
|
driver.
|
|
|
|
- Compile and install the kernel and the modules.
|
|
|
|
To use the driver, the kissattach program delivered with the AX.25 utilities
|
|
has to be modified.
|
|
|
|
- Do a cd to the directory that holds the kissattach sources. Edit the
|
|
kissattach.c file. At the top, insert the following lines:
|
|
|
|
#ifndef N_6PACK
|
|
#define N_6PACK (N_AX25+1)
|
|
#endif
|
|
|
|
Then find the line
|
|
|
|
int disc = N_AX25;
|
|
|
|
and replace N_AX25 by N_6PACK.
|
|
|
|
- Recompile kissattach. Rename it to spattach to avoid confusions.
|
|
|
|
Installing the driver:
|
|
|
|
- Do an insmod 6pack. Look at your /var/log/messages file to check if the
|
|
module has printed its initialization message.
|
|
|
|
- Do a spattach as you would launch kissattach when starting a KISS port.
|
|
Check if the kernel prints the message '6pack: TNC found'.
|
|
|
|
- From here, everything should work as if you were setting up a KISS port.
|
|
The only difference is that the network device that represents
|
|
the 6pack port is called sp instead of sl or ax. So, sp0 would be the
|
|
first 6pack port.
|
|
|
|
Although the driver has been tested on various platforms, I still declare it
|
|
ALPHA. BE CAREFUL! Sync your disks before insmoding the 6pack module
|
|
and spattaching. Watch out if your computer behaves strangely. Read section
|
|
6 of this file about known problems.
|
|
|
|
Note that the connect and status LEDs of the TNC are controlled in a
|
|
different way than they are when the TNC is used with PC/FlexNet. When using
|
|
FlexNet, the connect LED is on if there is a connection; the status LED is
|
|
on if there is data in the buffer of the PC's AX.25 engine that has to be
|
|
transmitted. Under Linux, the 6pack layer is beyond the AX.25 layer,
|
|
so the 6pack driver doesn't know anything about connects or data that
|
|
has not yet been transmitted. Therefore the LEDs are controlled
|
|
as they are in KISS mode: The connect LED is turned on if data is transferred
|
|
from the PC to the TNC over the serial line, the status LED if data is
|
|
sent to the PC.
|
|
|
|
6. Known problems
|
|
|
|
When testing the driver with 2.0.3x kernels and
|
|
operating with data rates on the radio channel of 9600 Baud or higher,
|
|
the driver may, on certain systems, sometimes print the message '6pack:
|
|
bad checksum', which is due to data loss if the other station sends two
|
|
or more subsequent packets. I have been told that this is due to a problem
|
|
with the serial driver of 2.0.3x kernels. I don't know yet if the problem
|
|
still exists with 2.1.x kernels, as I have heard that the serial driver
|
|
code has been changed with 2.1.x.
|
|
|
|
When shutting down the sp interface with ifconfig, the kernel crashes if
|
|
there is still an AX.25 connection left over which an IP connection was
|
|
running, even if that IP connection is already closed. The problem does not
|
|
occur when there is a bare AX.25 connection still running. I don't know if
|
|
this is a problem of the 6pack driver or something else in the kernel.
|
|
|
|
The driver has been tested as a module, not yet as a kernel-builtin driver.
|
|
|
|
The 6pack protocol supports daisy-chaining of TNCs in a token ring, which is
|
|
connected to one serial port of the PC. This feature is not implemented
|
|
and at least at the moment I won't be able to do it because I do not have
|
|
the opportunity to build a TNC daisy-chain and test it.
|
|
|
|
Some of the comments in the source code are inaccurate. They are left from
|
|
the SLIP/KISS driver, from which the 6pack driver has been derived.
|
|
I haven't modified or removed them yet -- sorry! The code itself needs
|
|
some cleaning and optimizing. This will be done in a later release.
|
|
|
|
If you encounter a bug or if you have a question or suggestion concerning the
|
|
driver, feel free to mail me, using the addresses given at the beginning of
|
|
this file.
|
|
|
|
Have fun!
|
|
|
|
Andreas
|