linux-stable/arch/x86/pci/numa.c
Yinghai Lu d49c428840 x86: make generic arch support NUMAQ
... so it could fall back to normal numa and we'd reduce the impact of the
NUMAQ subarch.

NUMAQ depends on GENERICARCH
also decouple genericarch numa from acpi.
also make it fall back to bigsmp if apicid > 8.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 11:34:42 +02:00

180 lines
4 KiB
C

/*
* numa.c - Low-level PCI access for NUMA-Q machines
*/
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/nodemask.h>
#include <mach_apic.h>
#include <asm/mpspec.h>
#include "pci.h"
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
#define BUS2QUAD(global) (mp_bus_id_to_node[global])
#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
EXPORT_SYMBOL(xquad_portio);
#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
{
unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
if (xquad_portio)
writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
else
outl(val, 0xCF8);
}
static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
spin_lock_irqsave(&pci_config_lock, flags);
write_cf8(bus, devfn, reg);
switch (len) {
case 1:
if (xquad_portio)
*value = readb(adr + (reg & 3));
else
*value = inb(0xCFC + (reg & 3));
break;
case 2:
if (xquad_portio)
*value = readw(adr + (reg & 2));
else
*value = inw(0xCFC + (reg & 2));
break;
case 4:
if (xquad_portio)
*value = readl(adr);
else
*value = inl(0xCFC);
break;
}
spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
spin_lock_irqsave(&pci_config_lock, flags);
write_cf8(bus, devfn, reg);
switch (len) {
case 1:
if (xquad_portio)
writeb(value, adr + (reg & 3));
else
outb((u8)value, 0xCFC + (reg & 3));
break;
case 2:
if (xquad_portio)
writew(value, adr + (reg & 2));
else
outw((u16)value, 0xCFC + (reg & 2));
break;
case 4:
if (xquad_portio)
writel(value, adr + reg);
else
outl((u32)value, 0xCFC);
break;
}
spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
#undef PCI_CONF1_MQ_ADDRESS
static struct pci_raw_ops pci_direct_conf1_mq = {
.read = pci_conf1_mq_read,
.write = pci_conf1_mq_write
};
static void __devinit pci_fixup_i450nx(struct pci_dev *d)
{
/*
* i450NX -- Find and scan all secondary buses on all PXB's.
*/
int pxb, reg;
u8 busno, suba, subb;
int quad = BUS2QUAD(d->bus->number);
printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
reg = 0xd0;
for(pxb=0; pxb<2; pxb++) {
pci_read_config_byte(d, reg++, &busno);
pci_read_config_byte(d, reg++, &suba);
pci_read_config_byte(d, reg++, &subb);
DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
if (busno) {
/* Bus A */
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
}
if (suba < subb) {
/* Bus B */
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
}
}
pcibios_last_bus = -1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
static int __init pci_numa_init(void)
{
int quad;
if (!found_numaq)
return 0;
raw_pci_ops = &pci_direct_conf1_mq;
if (pcibios_scanned++)
return 0;
pci_root_bus = pcibios_scan_root(0);
if (pci_root_bus)
pci_bus_add_devices(pci_root_bus);
if (num_online_nodes() > 1)
for_each_online_node(quad) {
if (quad == 0)
continue;
printk("Scanning PCI bus %d for quad %d\n",
QUADLOCAL2BUS(quad,0), quad);
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
}
return 0;
}
subsys_initcall(pci_numa_init);