mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 13:55:32 +00:00
a5de4be0aa
It seems that we cannot differentiate 88X3310 from 88X3340 by simply
looking at bit 3 of revision ID. This only works on revisions A0 and A1.
On revision B0, this bit is always 1.
Instead use the 3.d00d register for differentiation, since this register
contains information about number of ports on the device.
Fixes: 9885d016ff ("net: phy: marvell10g: add separate structure for 88X3340")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reported-by: Matteo Croce <mcroce@linux.microsoft.com>
Tested-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
47 lines
1.7 KiB
C
47 lines
1.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef _MARVELL_PHY_H
|
|
#define _MARVELL_PHY_H
|
|
|
|
/* Mask used for ID comparisons */
|
|
#define MARVELL_PHY_ID_MASK 0xfffffff0
|
|
|
|
/* Known PHY IDs */
|
|
#define MARVELL_PHY_ID_88E1101 0x01410c60
|
|
#define MARVELL_PHY_ID_88E1112 0x01410c90
|
|
#define MARVELL_PHY_ID_88E1111 0x01410cc0
|
|
#define MARVELL_PHY_ID_88E1118 0x01410e10
|
|
#define MARVELL_PHY_ID_88E1121R 0x01410cb0
|
|
#define MARVELL_PHY_ID_88E1145 0x01410cd0
|
|
#define MARVELL_PHY_ID_88E1149R 0x01410e50
|
|
#define MARVELL_PHY_ID_88E1240 0x01410e30
|
|
#define MARVELL_PHY_ID_88E1318S 0x01410e90
|
|
#define MARVELL_PHY_ID_88E1340S 0x01410dc0
|
|
#define MARVELL_PHY_ID_88E1116R 0x01410e40
|
|
#define MARVELL_PHY_ID_88E1510 0x01410dd0
|
|
#define MARVELL_PHY_ID_88E1540 0x01410eb0
|
|
#define MARVELL_PHY_ID_88E1545 0x01410ea0
|
|
#define MARVELL_PHY_ID_88E1548P 0x01410ec0
|
|
#define MARVELL_PHY_ID_88E3016 0x01410e60
|
|
#define MARVELL_PHY_ID_88X3310 0x002b09a0
|
|
#define MARVELL_PHY_ID_88E2110 0x002b09b0
|
|
#define MARVELL_PHY_ID_88X2222 0x01410f10
|
|
|
|
/* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
|
|
#define MARVELL_PHY_ID_88E1111_FINISAR 0x01ff0cc0
|
|
|
|
/* These Ethernet switch families contain embedded PHYs, but they do
|
|
* not have a model ID. So the switch driver traps reads to the ID2
|
|
* register and returns the switch family ID
|
|
*/
|
|
#define MARVELL_PHY_ID_88E6341_FAMILY 0x01410f41
|
|
#define MARVELL_PHY_ID_88E6390_FAMILY 0x01410f90
|
|
#define MARVELL_PHY_ID_88E6393_FAMILY 0x002b0b9b
|
|
|
|
#define MARVELL_PHY_FAMILY_ID(id) ((id) >> 4)
|
|
|
|
/* struct phy_device dev_flags definitions */
|
|
#define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001
|
|
#define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002
|
|
#define MARVELL_PHY_LED0_LINK_LED1_ACTIVE 0x00000004
|
|
|
|
#endif /* _MARVELL_PHY_H */
|