mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 19:29:37 +00:00
![Tony Lindgren](/assets/img/avatar_default.png)
If syscon_config.max_register is initialized like it should be, we have omap_ctrl_read/write() fail with out of range register access at least for omap3. We have omap3.dtsi setting up a regmap range for scm_conf, but we now have omap_ctrl_read/write() also attempt to use the regmap. However, omap_ctrl_read/write() is also used for other register ranges in the system control module (SCM). Let's fix the issue by just removing the regmap_read/write() usage for control module as suggested by Tero Kristo <t-kristo@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
735 lines
22 KiB
C
735 lines
22 KiB
C
/*
|
|
* OMAP2/3 System Control Module register access
|
|
*
|
|
* Copyright (C) 2007, 2012 Texas Instruments, Inc.
|
|
* Copyright (C) 2007 Nokia Corporation
|
|
*
|
|
* Written by Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#include "soc.h"
|
|
#include "iomap.h"
|
|
#include "common.h"
|
|
#include "cm-regbits-34xx.h"
|
|
#include "prm-regbits-34xx.h"
|
|
#include "prm3xxx.h"
|
|
#include "cm3xxx.h"
|
|
#include "sdrc.h"
|
|
#include "pm.h"
|
|
#include "control.h"
|
|
#include "clock.h"
|
|
|
|
/* Used by omap3_ctrl_save_padconf() */
|
|
#define START_PADCONF_SAVE 0x2
|
|
#define PADCONF_SAVE_DONE 0x1
|
|
|
|
static void __iomem *omap2_ctrl_base;
|
|
static s16 omap2_ctrl_offset;
|
|
|
|
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
|
|
struct omap3_scratchpad {
|
|
u32 boot_config_ptr;
|
|
u32 public_restore_ptr;
|
|
u32 secure_ram_restore_ptr;
|
|
u32 sdrc_module_semaphore;
|
|
u32 prcm_block_offset;
|
|
u32 sdrc_block_offset;
|
|
};
|
|
|
|
struct omap3_scratchpad_prcm_block {
|
|
u32 prm_contents[2];
|
|
u32 cm_contents[11];
|
|
u32 prcm_block_size;
|
|
};
|
|
|
|
struct omap3_scratchpad_sdrc_block {
|
|
u16 sysconfig;
|
|
u16 cs_cfg;
|
|
u16 sharing;
|
|
u16 err_type;
|
|
u32 dll_a_ctrl;
|
|
u32 dll_b_ctrl;
|
|
u32 power;
|
|
u32 cs_0;
|
|
u32 mcfg_0;
|
|
u16 mr_0;
|
|
u16 emr_1_0;
|
|
u16 emr_2_0;
|
|
u16 emr_3_0;
|
|
u32 actim_ctrla_0;
|
|
u32 actim_ctrlb_0;
|
|
u32 rfr_ctrl_0;
|
|
u32 cs_1;
|
|
u32 mcfg_1;
|
|
u16 mr_1;
|
|
u16 emr_1_1;
|
|
u16 emr_2_1;
|
|
u16 emr_3_1;
|
|
u32 actim_ctrla_1;
|
|
u32 actim_ctrlb_1;
|
|
u32 rfr_ctrl_1;
|
|
u16 dcdl_1_ctrl;
|
|
u16 dcdl_2_ctrl;
|
|
u32 flags;
|
|
u32 block_size;
|
|
};
|
|
|
|
void *omap3_secure_ram_storage;
|
|
|
|
/*
|
|
* This is used to store ARM registers in SDRAM before attempting
|
|
* an MPU OFF. The save and restore happens from the SRAM sleep code.
|
|
* The address is stored in scratchpad, so that it can be used
|
|
* during the restore path.
|
|
*/
|
|
u32 omap3_arm_context[128];
|
|
|
|
struct omap3_control_regs {
|
|
u32 sysconfig;
|
|
u32 devconf0;
|
|
u32 mem_dftrw0;
|
|
u32 mem_dftrw1;
|
|
u32 msuspendmux_0;
|
|
u32 msuspendmux_1;
|
|
u32 msuspendmux_2;
|
|
u32 msuspendmux_3;
|
|
u32 msuspendmux_4;
|
|
u32 msuspendmux_5;
|
|
u32 sec_ctrl;
|
|
u32 devconf1;
|
|
u32 csirxfe;
|
|
u32 iva2_bootaddr;
|
|
u32 iva2_bootmod;
|
|
u32 wkup_ctrl;
|
|
u32 debobs_0;
|
|
u32 debobs_1;
|
|
u32 debobs_2;
|
|
u32 debobs_3;
|
|
u32 debobs_4;
|
|
u32 debobs_5;
|
|
u32 debobs_6;
|
|
u32 debobs_7;
|
|
u32 debobs_8;
|
|
u32 prog_io0;
|
|
u32 prog_io1;
|
|
u32 dss_dpll_spreading;
|
|
u32 core_dpll_spreading;
|
|
u32 per_dpll_spreading;
|
|
u32 usbhost_dpll_spreading;
|
|
u32 pbias_lite;
|
|
u32 temp_sensor;
|
|
u32 sramldo4;
|
|
u32 sramldo5;
|
|
u32 csi;
|
|
u32 padconf_sys_nirq;
|
|
};
|
|
|
|
static struct omap3_control_regs control_context;
|
|
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
|
|
|
|
void __init omap2_set_globals_control(void __iomem *ctrl)
|
|
{
|
|
omap2_ctrl_base = ctrl;
|
|
}
|
|
|
|
u8 omap_ctrl_readb(u16 offset)
|
|
{
|
|
u32 val;
|
|
u8 byte_offset = offset & 0x3;
|
|
|
|
val = omap_ctrl_readl(offset);
|
|
|
|
return (val >> (byte_offset * 8)) & 0xff;
|
|
}
|
|
|
|
u16 omap_ctrl_readw(u16 offset)
|
|
{
|
|
u32 val;
|
|
u16 byte_offset = offset & 0x2;
|
|
|
|
val = omap_ctrl_readl(offset);
|
|
|
|
return (val >> (byte_offset * 8)) & 0xffff;
|
|
}
|
|
|
|
u32 omap_ctrl_readl(u16 offset)
|
|
{
|
|
offset &= 0xfffc;
|
|
|
|
return readl_relaxed(omap2_ctrl_base + offset);
|
|
}
|
|
|
|
void omap_ctrl_writeb(u8 val, u16 offset)
|
|
{
|
|
u32 tmp;
|
|
u8 byte_offset = offset & 0x3;
|
|
|
|
tmp = omap_ctrl_readl(offset);
|
|
|
|
tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
|
|
tmp |= val << (byte_offset * 8);
|
|
|
|
omap_ctrl_writel(tmp, offset);
|
|
}
|
|
|
|
void omap_ctrl_writew(u16 val, u16 offset)
|
|
{
|
|
u32 tmp;
|
|
u8 byte_offset = offset & 0x2;
|
|
|
|
tmp = omap_ctrl_readl(offset);
|
|
|
|
tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
|
|
tmp |= val << (byte_offset * 8);
|
|
|
|
omap_ctrl_writel(tmp, offset);
|
|
}
|
|
|
|
void omap_ctrl_writel(u32 val, u16 offset)
|
|
{
|
|
offset &= 0xfffc;
|
|
writel_relaxed(val, omap2_ctrl_base + offset);
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
|
|
/**
|
|
* omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
|
|
* @bootmode: 8-bit value to pass to some boot code
|
|
*
|
|
* Set the bootmode in the scratchpad RAM. This is used after the
|
|
* system restarts. Not sure what actually uses this - it may be the
|
|
* bootloader, rather than the boot ROM - contrary to the preserved
|
|
* comment below. No return value.
|
|
*/
|
|
void omap3_ctrl_write_boot_mode(u8 bootmode)
|
|
{
|
|
u32 l;
|
|
|
|
l = ('B' << 24) | ('M' << 16) | bootmode;
|
|
|
|
/*
|
|
* Reserve the first word in scratchpad for communicating
|
|
* with the boot ROM. A pointer to a data structure
|
|
* describing the boot process can be stored there,
|
|
* cf. OMAP34xx TRM, Initialization / Software Booting
|
|
* Configuration.
|
|
*
|
|
* XXX This should use some omap_ctrl_writel()-type function
|
|
*/
|
|
writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
|
|
}
|
|
|
|
#endif
|
|
|
|
/**
|
|
* omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
|
|
* @bootaddr: physical address of the boot loader
|
|
*
|
|
* Set boot address for the boot loader of a supported processor
|
|
* when a power ON sequence occurs.
|
|
*/
|
|
void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
|
|
{
|
|
u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
|
|
cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
|
|
cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
|
|
soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
|
|
0;
|
|
|
|
if (!offset) {
|
|
pr_err("%s: unsupported omap type\n", __func__);
|
|
return;
|
|
}
|
|
|
|
omap_ctrl_writel(bootaddr, offset);
|
|
}
|
|
|
|
/**
|
|
* omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
|
|
* @bootmode: 8-bit value to pass to some boot code
|
|
*
|
|
* Sets boot mode for the boot loader of a supported processor
|
|
* when a power ON sequence occurs.
|
|
*/
|
|
void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
|
|
{
|
|
u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
|
|
cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
|
|
0;
|
|
|
|
if (!offset) {
|
|
pr_err("%s: unsupported omap type\n", __func__);
|
|
return;
|
|
}
|
|
|
|
omap_ctrl_writel(bootmode, offset);
|
|
}
|
|
|
|
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
|
|
/*
|
|
* Clears the scratchpad contents in case of cold boot-
|
|
* called during bootup
|
|
*/
|
|
void omap3_clear_scratchpad_contents(void)
|
|
{
|
|
u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
|
|
void __iomem *v_addr;
|
|
u32 offset = 0;
|
|
|
|
v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
|
|
if (omap3xxx_prm_clear_global_cold_reset()) {
|
|
for ( ; offset <= max_offset; offset += 0x4)
|
|
writel_relaxed(0x0, (v_addr + offset));
|
|
}
|
|
}
|
|
|
|
/* Populate the scratchpad structure with restore structure */
|
|
void omap3_save_scratchpad_contents(void)
|
|
{
|
|
void __iomem *scratchpad_address;
|
|
u32 arm_context_addr;
|
|
struct omap3_scratchpad scratchpad_contents;
|
|
struct omap3_scratchpad_prcm_block prcm_block_contents;
|
|
struct omap3_scratchpad_sdrc_block sdrc_block_contents;
|
|
|
|
/*
|
|
* Populate the Scratchpad contents
|
|
*
|
|
* The "get_*restore_pointer" functions are used to provide a
|
|
* physical restore address where the ROM code jumps while waking
|
|
* up from MPU OFF/OSWR state.
|
|
* The restore pointer is stored into the scratchpad.
|
|
*/
|
|
scratchpad_contents.boot_config_ptr = 0x0;
|
|
if (cpu_is_omap3630())
|
|
scratchpad_contents.public_restore_ptr =
|
|
virt_to_phys(omap3_restore_3630);
|
|
else if (omap_rev() != OMAP3430_REV_ES3_0 &&
|
|
omap_rev() != OMAP3430_REV_ES3_1 &&
|
|
omap_rev() != OMAP3430_REV_ES3_1_2)
|
|
scratchpad_contents.public_restore_ptr =
|
|
virt_to_phys(omap3_restore);
|
|
else
|
|
scratchpad_contents.public_restore_ptr =
|
|
virt_to_phys(omap3_restore_es3);
|
|
|
|
if (omap_type() == OMAP2_DEVICE_TYPE_GP)
|
|
scratchpad_contents.secure_ram_restore_ptr = 0x0;
|
|
else
|
|
scratchpad_contents.secure_ram_restore_ptr =
|
|
(u32) __pa(omap3_secure_ram_storage);
|
|
scratchpad_contents.sdrc_module_semaphore = 0x0;
|
|
scratchpad_contents.prcm_block_offset = 0x2C;
|
|
scratchpad_contents.sdrc_block_offset = 0x64;
|
|
|
|
/* Populate the PRCM block contents */
|
|
omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
|
|
omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
|
|
|
|
prcm_block_contents.prcm_block_size = 0x0;
|
|
|
|
/* Populate the SDRC block contents */
|
|
sdrc_block_contents.sysconfig =
|
|
(sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
|
|
sdrc_block_contents.cs_cfg =
|
|
(sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
|
|
sdrc_block_contents.sharing =
|
|
(sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
|
|
sdrc_block_contents.err_type =
|
|
(sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
|
|
sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
|
|
sdrc_block_contents.dll_b_ctrl = 0x0;
|
|
/*
|
|
* Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
|
|
* be programed to issue automatic self refresh on timeout
|
|
* of AUTO_CNT = 1 prior to any transition to OFF mode.
|
|
*/
|
|
if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
|
|
&& (omap_rev() >= OMAP3430_REV_ES3_0))
|
|
sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
|
|
~(SDRC_POWER_AUTOCOUNT_MASK|
|
|
SDRC_POWER_CLKCTRL_MASK)) |
|
|
(1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
|
|
SDRC_SELF_REFRESH_ON_AUTOCOUNT;
|
|
else
|
|
sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
|
|
|
|
sdrc_block_contents.cs_0 = 0x0;
|
|
sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
|
|
sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
|
|
sdrc_block_contents.emr_1_0 = 0x0;
|
|
sdrc_block_contents.emr_2_0 = 0x0;
|
|
sdrc_block_contents.emr_3_0 = 0x0;
|
|
sdrc_block_contents.actim_ctrla_0 =
|
|
sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
|
|
sdrc_block_contents.actim_ctrlb_0 =
|
|
sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
|
|
sdrc_block_contents.rfr_ctrl_0 =
|
|
sdrc_read_reg(SDRC_RFR_CTRL_0);
|
|
sdrc_block_contents.cs_1 = 0x0;
|
|
sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
|
|
sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
|
|
sdrc_block_contents.emr_1_1 = 0x0;
|
|
sdrc_block_contents.emr_2_1 = 0x0;
|
|
sdrc_block_contents.emr_3_1 = 0x0;
|
|
sdrc_block_contents.actim_ctrla_1 =
|
|
sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
|
|
sdrc_block_contents.actim_ctrlb_1 =
|
|
sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
|
|
sdrc_block_contents.rfr_ctrl_1 =
|
|
sdrc_read_reg(SDRC_RFR_CTRL_1);
|
|
sdrc_block_contents.dcdl_1_ctrl = 0x0;
|
|
sdrc_block_contents.dcdl_2_ctrl = 0x0;
|
|
sdrc_block_contents.flags = 0x0;
|
|
sdrc_block_contents.block_size = 0x0;
|
|
|
|
arm_context_addr = virt_to_phys(omap3_arm_context);
|
|
|
|
/* Copy all the contents to the scratchpad location */
|
|
scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
|
|
memcpy_toio(scratchpad_address, &scratchpad_contents,
|
|
sizeof(scratchpad_contents));
|
|
/* Scratchpad contents being 32 bits, a divide by 4 done here */
|
|
memcpy_toio(scratchpad_address +
|
|
scratchpad_contents.prcm_block_offset,
|
|
&prcm_block_contents, sizeof(prcm_block_contents));
|
|
memcpy_toio(scratchpad_address +
|
|
scratchpad_contents.sdrc_block_offset,
|
|
&sdrc_block_contents, sizeof(sdrc_block_contents));
|
|
/*
|
|
* Copies the address of the location in SDRAM where ARM
|
|
* registers get saved during a MPU OFF transition.
|
|
*/
|
|
memcpy_toio(scratchpad_address +
|
|
scratchpad_contents.sdrc_block_offset +
|
|
sizeof(sdrc_block_contents), &arm_context_addr, 4);
|
|
}
|
|
|
|
void omap3_control_save_context(void)
|
|
{
|
|
control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
|
|
control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
|
|
control_context.mem_dftrw0 =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
|
|
control_context.mem_dftrw1 =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
|
|
control_context.msuspendmux_0 =
|
|
omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
|
|
control_context.msuspendmux_1 =
|
|
omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
|
|
control_context.msuspendmux_2 =
|
|
omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
|
|
control_context.msuspendmux_3 =
|
|
omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
|
|
control_context.msuspendmux_4 =
|
|
omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
|
|
control_context.msuspendmux_5 =
|
|
omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
|
|
control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
|
|
control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
|
|
control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
|
|
control_context.iva2_bootaddr =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
|
|
control_context.iva2_bootmod =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
|
|
control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
|
|
control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
|
|
control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
|
|
control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
|
|
control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
|
|
control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
|
|
control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
|
|
control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
|
|
control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
|
|
control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
|
|
control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
|
|
control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
|
|
control_context.dss_dpll_spreading =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
|
|
control_context.core_dpll_spreading =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
|
|
control_context.per_dpll_spreading =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
|
|
control_context.usbhost_dpll_spreading =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
|
|
control_context.pbias_lite =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
|
|
control_context.temp_sensor =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
|
|
control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
|
|
control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
|
|
control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
|
|
control_context.padconf_sys_nirq =
|
|
omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
|
|
}
|
|
|
|
void omap3_control_restore_context(void)
|
|
{
|
|
omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
|
|
omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
|
|
omap_ctrl_writel(control_context.mem_dftrw0,
|
|
OMAP343X_CONTROL_MEM_DFTRW0);
|
|
omap_ctrl_writel(control_context.mem_dftrw1,
|
|
OMAP343X_CONTROL_MEM_DFTRW1);
|
|
omap_ctrl_writel(control_context.msuspendmux_0,
|
|
OMAP2_CONTROL_MSUSPENDMUX_0);
|
|
omap_ctrl_writel(control_context.msuspendmux_1,
|
|
OMAP2_CONTROL_MSUSPENDMUX_1);
|
|
omap_ctrl_writel(control_context.msuspendmux_2,
|
|
OMAP2_CONTROL_MSUSPENDMUX_2);
|
|
omap_ctrl_writel(control_context.msuspendmux_3,
|
|
OMAP2_CONTROL_MSUSPENDMUX_3);
|
|
omap_ctrl_writel(control_context.msuspendmux_4,
|
|
OMAP2_CONTROL_MSUSPENDMUX_4);
|
|
omap_ctrl_writel(control_context.msuspendmux_5,
|
|
OMAP2_CONTROL_MSUSPENDMUX_5);
|
|
omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
|
|
omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
|
|
omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
|
|
omap_ctrl_writel(control_context.iva2_bootaddr,
|
|
OMAP343X_CONTROL_IVA2_BOOTADDR);
|
|
omap_ctrl_writel(control_context.iva2_bootmod,
|
|
OMAP343X_CONTROL_IVA2_BOOTMOD);
|
|
omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
|
|
omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
|
|
omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
|
|
omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
|
|
omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
|
|
omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
|
|
omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
|
|
omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
|
|
omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
|
|
omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
|
|
omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
|
|
omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
|
|
omap_ctrl_writel(control_context.dss_dpll_spreading,
|
|
OMAP343X_CONTROL_DSS_DPLL_SPREADING);
|
|
omap_ctrl_writel(control_context.core_dpll_spreading,
|
|
OMAP343X_CONTROL_CORE_DPLL_SPREADING);
|
|
omap_ctrl_writel(control_context.per_dpll_spreading,
|
|
OMAP343X_CONTROL_PER_DPLL_SPREADING);
|
|
omap_ctrl_writel(control_context.usbhost_dpll_spreading,
|
|
OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
|
|
omap_ctrl_writel(control_context.pbias_lite,
|
|
OMAP343X_CONTROL_PBIAS_LITE);
|
|
omap_ctrl_writel(control_context.temp_sensor,
|
|
OMAP343X_CONTROL_TEMP_SENSOR);
|
|
omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
|
|
omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
|
|
omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
|
|
omap_ctrl_writel(control_context.padconf_sys_nirq,
|
|
OMAP343X_CONTROL_PADCONF_SYSNIRQ);
|
|
}
|
|
|
|
void omap3630_ctrl_disable_rta(void)
|
|
{
|
|
if (!cpu_is_omap3630())
|
|
return;
|
|
omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
|
|
}
|
|
|
|
/**
|
|
* omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
|
|
*
|
|
* Tell the SCM to start saving the padconf registers, then wait for
|
|
* the process to complete. Returns 0 unconditionally, although it
|
|
* should also eventually be able to return -ETIMEDOUT, if the save
|
|
* does not complete.
|
|
*
|
|
* XXX This function is missing a timeout. What should it be?
|
|
*/
|
|
int omap3_ctrl_save_padconf(void)
|
|
{
|
|
u32 cpo;
|
|
|
|
/* Save the padconf registers */
|
|
cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
|
|
cpo |= START_PADCONF_SAVE;
|
|
omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF);
|
|
|
|
/* wait for the save to complete */
|
|
while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
|
|
& PADCONF_SAVE_DONE))
|
|
udelay(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
|
|
*
|
|
* Sets the bootmode for IVA2 to idle. This is needed by the PM code to
|
|
* force disable IVA2 so that it does not prevent any low-power states.
|
|
*/
|
|
static void __init omap3_ctrl_set_iva_bootmode_idle(void)
|
|
{
|
|
omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
|
|
OMAP343X_CONTROL_IVA2_BOOTMOD);
|
|
}
|
|
|
|
/**
|
|
* omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
|
|
*
|
|
* Sets up the pads controlling the stacked modem in such way that the
|
|
* device can enter idle.
|
|
*/
|
|
static void __init omap3_ctrl_setup_d2d_padconf(void)
|
|
{
|
|
u16 mask, padconf;
|
|
|
|
/*
|
|
* In a stand alone OMAP3430 where there is not a stacked
|
|
* modem for the D2D Idle Ack and D2D MStandby must be pulled
|
|
* high. S CONTROL_PADCONF_SAD2D_IDLEACK and
|
|
* CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
|
|
*/
|
|
mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
|
|
padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
|
|
padconf |= mask;
|
|
omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
|
|
|
|
padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
|
|
padconf |= mask;
|
|
omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
|
|
}
|
|
|
|
/**
|
|
* omap3_ctrl_init - does static initializations for control module
|
|
*
|
|
* Initializes system control module. This sets up the sysconfig autoidle,
|
|
* and sets up modem and iva2 so that they can be idled properly.
|
|
*/
|
|
void __init omap3_ctrl_init(void)
|
|
{
|
|
omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
|
|
|
|
omap3_ctrl_set_iva_bootmode_idle();
|
|
|
|
omap3_ctrl_setup_d2d_padconf();
|
|
}
|
|
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
|
|
|
|
struct control_init_data {
|
|
int index;
|
|
s16 offset;
|
|
};
|
|
|
|
static struct control_init_data ctrl_data = {
|
|
.index = TI_CLKM_CTRL,
|
|
};
|
|
|
|
static const struct control_init_data omap2_ctrl_data = {
|
|
.index = TI_CLKM_CTRL,
|
|
.offset = -OMAP2_CONTROL_GENERAL,
|
|
};
|
|
|
|
static const struct of_device_id omap_scrm_dt_match_table[] = {
|
|
{ .compatible = "ti,am3-scm", .data = &ctrl_data },
|
|
{ .compatible = "ti,am4-scm", .data = &ctrl_data },
|
|
{ .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
|
|
{ .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
|
|
{ .compatible = "ti,dm814-scm", .data = &ctrl_data },
|
|
{ .compatible = "ti,dm816-scrm", .data = &ctrl_data },
|
|
{ .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
|
|
{ .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
|
|
{ .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
|
|
{ }
|
|
};
|
|
|
|
/**
|
|
* omap2_control_base_init - initialize iomappings for the control driver
|
|
*
|
|
* Detects and initializes the iomappings for the control driver, based
|
|
* on the DT data. Returns 0 in success, negative error value
|
|
* otherwise.
|
|
*/
|
|
int __init omap2_control_base_init(void)
|
|
{
|
|
struct device_node *np;
|
|
const struct of_device_id *match;
|
|
struct control_init_data *data;
|
|
|
|
for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
|
|
data = (struct control_init_data *)match->data;
|
|
|
|
omap2_ctrl_base = of_iomap(np, 0);
|
|
if (!omap2_ctrl_base)
|
|
return -ENOMEM;
|
|
|
|
omap2_ctrl_offset = data->offset;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_control_init - low level init for the control driver
|
|
*
|
|
* Initializes the low level clock infrastructure for control driver.
|
|
* Returns 0 in success, negative error value in failure.
|
|
*/
|
|
int __init omap_control_init(void)
|
|
{
|
|
struct device_node *np, *scm_conf;
|
|
const struct of_device_id *match;
|
|
const struct omap_prcm_init_data *data;
|
|
int ret;
|
|
struct regmap *syscon;
|
|
|
|
for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
|
|
data = match->data;
|
|
|
|
/*
|
|
* Check if we have scm_conf node, if yes, use this to
|
|
* access clock registers.
|
|
*/
|
|
scm_conf = of_get_child_by_name(np, "scm_conf");
|
|
|
|
if (scm_conf) {
|
|
syscon = syscon_node_to_regmap(scm_conf);
|
|
|
|
if (IS_ERR(syscon))
|
|
return PTR_ERR(syscon);
|
|
|
|
if (of_get_child_by_name(scm_conf, "clocks")) {
|
|
ret = omap2_clk_provider_init(scm_conf,
|
|
data->index,
|
|
syscon, NULL);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
} else {
|
|
/* No scm_conf found, direct access */
|
|
ret = omap2_clk_provider_init(np, data->index, NULL,
|
|
omap2_ctrl_base);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap3_control_legacy_iomap_init - legacy iomap init for clock providers
|
|
*
|
|
* Legacy iomap init for clock provider. Needed only by legacy boot mode,
|
|
* where the base addresses are not parsed from DT, but still required
|
|
* by the clock driver to be setup properly.
|
|
*/
|
|
void __init omap3_control_legacy_iomap_init(void)
|
|
{
|
|
omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
|
|
}
|