mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 19:29:37 +00:00
![Arnd Bergmann](/assets/img/avatar_default.png)
We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
931 lines
21 KiB
C
931 lines
21 KiB
C
/*
|
|
* Support for the Arcom ZEUS.
|
|
*
|
|
* Copyright (C) 2006 Arcom Control Systems Ltd.
|
|
*
|
|
* Loosely based on Arcom's 2.6.16.28.
|
|
* Maintained by Marc Zyngier <maz@misterjones.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/dm9000.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/pxa2xx_spi.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/pxa-i2c.h>
|
|
#include <linux/platform_data/pca953x.h>
|
|
#include <linux/apm-emulation.h>
|
|
#include <linux/can/platform/mcp251x.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/suspend.h>
|
|
#include <asm/system_info.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "pxa27x.h"
|
|
#include <mach/regs-uart.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include "pxa27x-udc.h"
|
|
#include "udc.h"
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include "pm.h"
|
|
#include <mach/audio.h>
|
|
#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
|
|
#include "zeus.h"
|
|
#include <mach/smemc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
/*
|
|
* Interrupt handling
|
|
*/
|
|
|
|
static unsigned long zeus_irq_enabled_mask;
|
|
static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
|
|
static const int zeus_isa_irq_map[] = {
|
|
0, /* ISA irq #0, invalid */
|
|
0, /* ISA irq #1, invalid */
|
|
0, /* ISA irq #2, invalid */
|
|
1 << 0, /* ISA irq #3 */
|
|
1 << 1, /* ISA irq #4 */
|
|
1 << 2, /* ISA irq #5 */
|
|
1 << 3, /* ISA irq #6 */
|
|
1 << 4, /* ISA irq #7 */
|
|
0, /* ISA irq #8, invalid */
|
|
0, /* ISA irq #9, invalid */
|
|
1 << 5, /* ISA irq #10 */
|
|
1 << 6, /* ISA irq #11 */
|
|
1 << 7, /* ISA irq #12 */
|
|
};
|
|
|
|
static inline int zeus_irq_to_bitmask(unsigned int irq)
|
|
{
|
|
return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
|
|
}
|
|
|
|
static inline int zeus_bit_to_irq(int bit)
|
|
{
|
|
return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
|
|
}
|
|
|
|
static void zeus_ack_irq(struct irq_data *d)
|
|
{
|
|
__raw_writew(zeus_irq_to_bitmask(d->irq), ZEUS_CPLD_ISA_IRQ);
|
|
}
|
|
|
|
static void zeus_mask_irq(struct irq_data *d)
|
|
{
|
|
zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(d->irq));
|
|
}
|
|
|
|
static void zeus_unmask_irq(struct irq_data *d)
|
|
{
|
|
zeus_irq_enabled_mask |= zeus_irq_to_bitmask(d->irq);
|
|
}
|
|
|
|
static inline unsigned long zeus_irq_pending(void)
|
|
{
|
|
return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
|
|
}
|
|
|
|
static void zeus_irq_handler(struct irq_desc *desc)
|
|
{
|
|
unsigned int irq;
|
|
unsigned long pending;
|
|
|
|
pending = zeus_irq_pending();
|
|
do {
|
|
/* we're in a chained irq handler,
|
|
* so ack the interrupt by hand */
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
|
|
if (likely(pending)) {
|
|
irq = zeus_bit_to_irq(__ffs(pending));
|
|
generic_handle_irq(irq);
|
|
}
|
|
pending = zeus_irq_pending();
|
|
} while (pending);
|
|
}
|
|
|
|
static struct irq_chip zeus_irq_chip = {
|
|
.name = "ISA",
|
|
.irq_ack = zeus_ack_irq,
|
|
.irq_mask = zeus_mask_irq,
|
|
.irq_unmask = zeus_unmask_irq,
|
|
};
|
|
|
|
static void __init zeus_init_irq(void)
|
|
{
|
|
int level;
|
|
int isa_irq;
|
|
|
|
pxa27x_init_irq();
|
|
|
|
/* Peripheral IRQs. It would be nice to move those inside driver
|
|
configuration, but it is not supported at the moment. */
|
|
irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
|
|
irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
|
|
irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
|
|
irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),
|
|
IRQ_TYPE_EDGE_FALLING);
|
|
irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
|
|
|
|
/* Setup ISA IRQs */
|
|
for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
|
|
isa_irq = zeus_bit_to_irq(level);
|
|
irq_set_chip_and_handler(isa_irq, &zeus_irq_chip,
|
|
handle_edge_irq);
|
|
irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
}
|
|
|
|
irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
|
|
irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
|
|
}
|
|
|
|
|
|
/*
|
|
* Platform devices
|
|
*/
|
|
|
|
/* Flash */
|
|
static struct resource zeus_mtd_resources[] = {
|
|
[0] = { /* NOR Flash (up to 64MB) */
|
|
.start = ZEUS_FLASH_PHYS,
|
|
.end = ZEUS_FLASH_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = { /* SRAM */
|
|
.start = ZEUS_SRAM_PHYS,
|
|
.end = ZEUS_SRAM_PHYS + SZ_512K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data zeus_flash_data[] = {
|
|
[0] = {
|
|
.width = 2,
|
|
.parts = NULL,
|
|
.nr_parts = 0,
|
|
},
|
|
};
|
|
|
|
static struct platform_device zeus_mtd_devices[] = {
|
|
[0] = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &zeus_flash_data[0],
|
|
},
|
|
.resource = &zeus_mtd_resources[0],
|
|
.num_resources = 1,
|
|
},
|
|
};
|
|
|
|
/* Serial */
|
|
static struct resource zeus_serial_resources[] = {
|
|
{
|
|
.start = 0x10000000,
|
|
.end = 0x1000000f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = 0x10800000,
|
|
.end = 0x1080000f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = 0x11000000,
|
|
.end = 0x1100000f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = 0x40100000,
|
|
.end = 0x4010001f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = 0x40200000,
|
|
.end = 0x4020001f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = 0x40700000,
|
|
.end = 0x4070001f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct plat_serial8250_port serial_platform_data[] = {
|
|
/* External UARTs */
|
|
/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
|
|
{ /* COM1 */
|
|
.mapbase = 0x10000000,
|
|
.irq = PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
|
|
.irqflags = IRQF_TRIGGER_RISING,
|
|
.uartclk = 14745600,
|
|
.regshift = 1,
|
|
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
},
|
|
{ /* COM2 */
|
|
.mapbase = 0x10800000,
|
|
.irq = PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
|
|
.irqflags = IRQF_TRIGGER_RISING,
|
|
.uartclk = 14745600,
|
|
.regshift = 1,
|
|
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
},
|
|
{ /* COM3 */
|
|
.mapbase = 0x11000000,
|
|
.irq = PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
|
|
.irqflags = IRQF_TRIGGER_RISING,
|
|
.uartclk = 14745600,
|
|
.regshift = 1,
|
|
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
},
|
|
{ /* COM4 */
|
|
.mapbase = 0x11800000,
|
|
.irq = PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
|
|
.irqflags = IRQF_TRIGGER_RISING,
|
|
.uartclk = 14745600,
|
|
.regshift = 1,
|
|
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
},
|
|
/* Internal UARTs */
|
|
{ /* FFUART */
|
|
.membase = (void *)&FFUART,
|
|
.mapbase = __PREG(FFUART),
|
|
.irq = IRQ_FFUART,
|
|
.uartclk = 921600 * 16,
|
|
.regshift = 2,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
},
|
|
{ /* BTUART */
|
|
.membase = (void *)&BTUART,
|
|
.mapbase = __PREG(BTUART),
|
|
.irq = IRQ_BTUART,
|
|
.uartclk = 921600 * 16,
|
|
.regshift = 2,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
},
|
|
{ /* STUART */
|
|
.membase = (void *)&STUART,
|
|
.mapbase = __PREG(STUART),
|
|
.irq = IRQ_STUART,
|
|
.uartclk = 921600 * 16,
|
|
.regshift = 2,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device zeus_serial_device = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev = {
|
|
.platform_data = serial_platform_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(zeus_serial_resources),
|
|
.resource = zeus_serial_resources,
|
|
};
|
|
|
|
/* Ethernet */
|
|
static struct resource zeus_dm9k0_resource[] = {
|
|
[0] = {
|
|
.start = ZEUS_ETH0_PHYS,
|
|
.end = ZEUS_ETH0_PHYS + 1,
|
|
.flags = IORESOURCE_MEM
|
|
},
|
|
[1] = {
|
|
.start = ZEUS_ETH0_PHYS + 2,
|
|
.end = ZEUS_ETH0_PHYS + 3,
|
|
.flags = IORESOURCE_MEM
|
|
},
|
|
[2] = {
|
|
.start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
|
|
.end = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
|
},
|
|
};
|
|
|
|
static struct resource zeus_dm9k1_resource[] = {
|
|
[0] = {
|
|
.start = ZEUS_ETH1_PHYS,
|
|
.end = ZEUS_ETH1_PHYS + 1,
|
|
.flags = IORESOURCE_MEM
|
|
},
|
|
[1] = {
|
|
.start = ZEUS_ETH1_PHYS + 2,
|
|
.end = ZEUS_ETH1_PHYS + 3,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
|
|
.end = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
|
},
|
|
};
|
|
|
|
static struct dm9000_plat_data zeus_dm9k_platdata = {
|
|
.flags = DM9000_PLATF_16BITONLY,
|
|
};
|
|
|
|
static struct platform_device zeus_dm9k0_device = {
|
|
.name = "dm9000",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(zeus_dm9k0_resource),
|
|
.resource = zeus_dm9k0_resource,
|
|
.dev = {
|
|
.platform_data = &zeus_dm9k_platdata,
|
|
}
|
|
};
|
|
|
|
static struct platform_device zeus_dm9k1_device = {
|
|
.name = "dm9000",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(zeus_dm9k1_resource),
|
|
.resource = zeus_dm9k1_resource,
|
|
.dev = {
|
|
.platform_data = &zeus_dm9k_platdata,
|
|
}
|
|
};
|
|
|
|
/* External SRAM */
|
|
static struct resource zeus_sram_resource = {
|
|
.start = ZEUS_SRAM_PHYS,
|
|
.end = ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device zeus_sram_device = {
|
|
.name = "pxa2xx-8bit-sram",
|
|
.id = 0,
|
|
.num_resources = 1,
|
|
.resource = &zeus_sram_resource,
|
|
};
|
|
|
|
/* SPI interface on SSP3 */
|
|
static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
|
|
.num_chipselect = 1,
|
|
.enable_dma = 1,
|
|
};
|
|
|
|
/* CAN bus on SPI */
|
|
static struct regulator_consumer_supply can_regulator_consumer =
|
|
REGULATOR_SUPPLY("vdd", "spi3.0");
|
|
|
|
static struct regulator_init_data can_regulator_init_data = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.consumer_supplies = &can_regulator_consumer,
|
|
.num_consumer_supplies = 1,
|
|
};
|
|
|
|
static struct fixed_voltage_config can_regulator_pdata = {
|
|
.supply_name = "CAN_SHDN",
|
|
.microvolts = 3300000,
|
|
.gpio = ZEUS_CAN_SHDN_GPIO,
|
|
.init_data = &can_regulator_init_data,
|
|
};
|
|
|
|
static struct platform_device can_regulator_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &can_regulator_pdata,
|
|
},
|
|
};
|
|
|
|
static struct mcp251x_platform_data zeus_mcp2515_pdata = {
|
|
.oscillator_frequency = 16*1000*1000,
|
|
};
|
|
|
|
static struct spi_board_info zeus_spi_board_info[] = {
|
|
[0] = {
|
|
.modalias = "mcp2515",
|
|
.platform_data = &zeus_mcp2515_pdata,
|
|
.irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
|
|
.max_speed_hz = 1*1000*1000,
|
|
.bus_num = 3,
|
|
.mode = SPI_MODE_0,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
/* Leds */
|
|
static struct gpio_led zeus_leds[] = {
|
|
[0] = {
|
|
.name = "zeus:yellow:1",
|
|
.default_trigger = "heartbeat",
|
|
.gpio = ZEUS_EXT0_GPIO(3),
|
|
.active_low = 1,
|
|
},
|
|
[1] = {
|
|
.name = "zeus:yellow:2",
|
|
.default_trigger = "default-on",
|
|
.gpio = ZEUS_EXT0_GPIO(4),
|
|
.active_low = 1,
|
|
},
|
|
[2] = {
|
|
.name = "zeus:yellow:3",
|
|
.default_trigger = "default-on",
|
|
.gpio = ZEUS_EXT0_GPIO(5),
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data zeus_leds_info = {
|
|
.leds = zeus_leds,
|
|
.num_leds = ARRAY_SIZE(zeus_leds),
|
|
};
|
|
|
|
static struct platform_device zeus_leds_device = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &zeus_leds_info,
|
|
},
|
|
};
|
|
|
|
static void zeus_cf_reset(int state)
|
|
{
|
|
u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
|
|
|
|
if (state)
|
|
cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
|
|
else
|
|
cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
|
|
|
|
__raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
|
|
}
|
|
|
|
static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
|
|
.cd_gpio = ZEUS_CF_CD_GPIO,
|
|
.rdy_gpio = ZEUS_CF_RDY_GPIO,
|
|
.pwr_gpio = ZEUS_CF_PWEN_GPIO,
|
|
.reset = zeus_cf_reset,
|
|
};
|
|
|
|
static struct platform_device zeus_pcmcia_device = {
|
|
.name = "zeus-pcmcia",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &zeus_pcmcia_info,
|
|
},
|
|
};
|
|
|
|
static struct resource zeus_max6369_resource = {
|
|
.start = ZEUS_CPLD_EXTWDOG_PHYS,
|
|
.end = ZEUS_CPLD_EXTWDOG_PHYS,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
struct platform_device zeus_max6369_device = {
|
|
.name = "max6369_wdt",
|
|
.id = -1,
|
|
.resource = &zeus_max6369_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
/* AC'97 */
|
|
static pxa2xx_audio_ops_t zeus_ac97_info = {
|
|
.reset_gpio = 95,
|
|
};
|
|
|
|
|
|
/*
|
|
* USB host
|
|
*/
|
|
|
|
static struct regulator_consumer_supply zeus_ohci_regulator_supplies[] = {
|
|
REGULATOR_SUPPLY("vbus2", "pxa27x-ohci"),
|
|
};
|
|
|
|
static struct regulator_init_data zeus_ohci_regulator_data = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(zeus_ohci_regulator_supplies),
|
|
.consumer_supplies = zeus_ohci_regulator_supplies,
|
|
};
|
|
|
|
static struct fixed_voltage_config zeus_ohci_regulator_config = {
|
|
.supply_name = "vbus2",
|
|
.microvolts = 5000000, /* 5.0V */
|
|
.gpio = ZEUS_USB2_PWREN_GPIO,
|
|
.enable_high = 1,
|
|
.startup_delay = 0,
|
|
.init_data = &zeus_ohci_regulator_data,
|
|
};
|
|
|
|
static struct platform_device zeus_ohci_regulator_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &zeus_ohci_regulator_config,
|
|
},
|
|
};
|
|
|
|
static struct pxaohci_platform_data zeus_ohci_platform_data = {
|
|
.port_mode = PMM_NPS_MODE,
|
|
/* Clear Power Control Polarity Low and set Power Sense
|
|
* Polarity Low. Supply power to USB ports. */
|
|
.flags = ENABLE_PORT_ALL | POWER_SENSE_LOW,
|
|
};
|
|
|
|
static void zeus_register_ohci(void)
|
|
{
|
|
/* Port 2 is shared between host and client interface. */
|
|
UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
|
|
|
|
pxa_set_ohci_info(&zeus_ohci_platform_data);
|
|
}
|
|
|
|
/*
|
|
* Flat Panel
|
|
*/
|
|
|
|
static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
|
|
{
|
|
gpio_set_value(ZEUS_LCD_EN_GPIO, on);
|
|
}
|
|
|
|
static void zeus_backlight_power(int on)
|
|
{
|
|
gpio_set_value(ZEUS_BKLEN_GPIO, on);
|
|
}
|
|
|
|
static int zeus_setup_fb_gpios(void)
|
|
{
|
|
int err;
|
|
|
|
if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
|
|
goto out_err;
|
|
|
|
if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
|
|
goto out_err_lcd;
|
|
|
|
if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
|
|
goto out_err_lcd;
|
|
|
|
if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
|
|
goto out_err_bkl;
|
|
|
|
return 0;
|
|
|
|
out_err_bkl:
|
|
gpio_free(ZEUS_BKLEN_GPIO);
|
|
out_err_lcd:
|
|
gpio_free(ZEUS_LCD_EN_GPIO);
|
|
out_err:
|
|
return err;
|
|
}
|
|
|
|
static struct pxafb_mode_info zeus_fb_mode_info[] = {
|
|
{
|
|
.pixclock = 39722,
|
|
|
|
.xres = 640,
|
|
.yres = 480,
|
|
|
|
.bpp = 16,
|
|
|
|
.hsync_len = 63,
|
|
.left_margin = 16,
|
|
.right_margin = 81,
|
|
|
|
.vsync_len = 2,
|
|
.upper_margin = 12,
|
|
.lower_margin = 31,
|
|
|
|
.sync = 0,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info zeus_fb_info = {
|
|
.modes = zeus_fb_mode_info,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
.pxafb_lcd_power = zeus_lcd_power,
|
|
.pxafb_backlight_power = zeus_backlight_power,
|
|
};
|
|
|
|
/*
|
|
* MMC/SD Device
|
|
*
|
|
* The card detect interrupt isn't debounced so we delay it by 250ms
|
|
* to give the card a chance to fully insert/eject.
|
|
*/
|
|
|
|
static struct pxamci_platform_data zeus_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.detect_delay_ms = 250,
|
|
.gpio_card_detect = ZEUS_MMC_CD_GPIO,
|
|
.gpio_card_ro = ZEUS_MMC_WP_GPIO,
|
|
.gpio_card_ro_invert = 1,
|
|
.gpio_power = -1
|
|
};
|
|
|
|
/*
|
|
* USB Device Controller
|
|
*/
|
|
static void zeus_udc_command(int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case PXA2XX_UDC_CMD_DISCONNECT:
|
|
pr_info("zeus: disconnecting USB client\n");
|
|
UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
|
|
break;
|
|
|
|
case PXA2XX_UDC_CMD_CONNECT:
|
|
pr_info("zeus: connecting USB client\n");
|
|
UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static struct pxa2xx_udc_mach_info zeus_udc_info = {
|
|
.udc_command = zeus_udc_command,
|
|
};
|
|
|
|
static struct platform_device *zeus_devices[] __initdata = {
|
|
&zeus_serial_device,
|
|
&zeus_mtd_devices[0],
|
|
&zeus_dm9k0_device,
|
|
&zeus_dm9k1_device,
|
|
&zeus_sram_device,
|
|
&zeus_leds_device,
|
|
&zeus_pcmcia_device,
|
|
&zeus_max6369_device,
|
|
&can_regulator_device,
|
|
&zeus_ohci_regulator_device,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static void zeus_power_off(void)
|
|
{
|
|
local_irq_disable();
|
|
cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
|
|
}
|
|
#else
|
|
#define zeus_power_off NULL
|
|
#endif
|
|
|
|
#ifdef CONFIG_APM_EMULATION
|
|
static void zeus_get_power_status(struct apm_power_info *info)
|
|
{
|
|
/* Power supply is always present */
|
|
info->ac_line_status = APM_AC_ONLINE;
|
|
info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
|
|
info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT;
|
|
}
|
|
|
|
static inline void zeus_setup_apm(void)
|
|
{
|
|
apm_get_power_status = zeus_get_power_status;
|
|
}
|
|
#else
|
|
static inline void zeus_setup_apm(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
|
|
unsigned ngpio, void *context)
|
|
{
|
|
int i;
|
|
u8 pcb_info = 0;
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
int pcb_bit = gpio + i + 8;
|
|
|
|
if (gpio_request(pcb_bit, "pcb info")) {
|
|
dev_err(&client->dev, "Can't request pcb info %d\n", i);
|
|
continue;
|
|
}
|
|
|
|
if (gpio_direction_input(pcb_bit)) {
|
|
dev_err(&client->dev, "Can't read pcb info %d\n", i);
|
|
gpio_free(pcb_bit);
|
|
continue;
|
|
}
|
|
|
|
pcb_info |= !!gpio_get_value(pcb_bit) << i;
|
|
|
|
gpio_free(pcb_bit);
|
|
}
|
|
|
|
dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
|
|
pcb_info >> 4, pcb_info & 0xf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pca953x_platform_data zeus_pca953x_pdata[] = {
|
|
[0] = { .gpio_base = ZEUS_EXT0_GPIO_BASE, },
|
|
[1] = {
|
|
.gpio_base = ZEUS_EXT1_GPIO_BASE,
|
|
.setup = zeus_get_pcb_info,
|
|
},
|
|
[2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
|
|
};
|
|
|
|
static struct i2c_board_info __initdata zeus_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("pca9535", 0x21),
|
|
.platform_data = &zeus_pca953x_pdata[0],
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("pca9535", 0x22),
|
|
.platform_data = &zeus_pca953x_pdata[1],
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("pca9535", 0x20),
|
|
.platform_data = &zeus_pca953x_pdata[2],
|
|
.irq = PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
|
|
},
|
|
{ I2C_BOARD_INFO("lm75a", 0x48) },
|
|
{ I2C_BOARD_INFO("24c01", 0x50) },
|
|
{ I2C_BOARD_INFO("isl1208", 0x6f) },
|
|
};
|
|
|
|
static mfp_cfg_t zeus_pin_config[] __initdata = {
|
|
/* AC97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
|
|
GPIO15_nCS_1,
|
|
GPIO78_nCS_2,
|
|
GPIO80_nCS_4,
|
|
GPIO33_nCS_5,
|
|
|
|
GPIO22_GPIO,
|
|
GPIO32_MMC_CLK,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
GPIO112_MMC_CMD,
|
|
|
|
GPIO88_USBH1_PWR,
|
|
GPIO89_USBH1_PEN,
|
|
GPIO119_USBH2_PWR,
|
|
GPIO120_USBH2_PEN,
|
|
|
|
GPIO86_LCD_LDD_16,
|
|
GPIO87_LCD_LDD_17,
|
|
|
|
GPIO102_GPIO,
|
|
GPIO104_CIF_DD_2,
|
|
GPIO105_CIF_DD_1,
|
|
|
|
GPIO81_SSP3_TXD,
|
|
GPIO82_SSP3_RXD,
|
|
GPIO83_SSP3_SFRM,
|
|
GPIO84_SSP3_SCLK,
|
|
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO85_nPCE_1,
|
|
GPIO54_nPCE_2,
|
|
GPIO79_PSKTSEL,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16,
|
|
GPIO36_GPIO, /* CF CD */
|
|
GPIO97_GPIO, /* CF PWREN */
|
|
GPIO99_GPIO, /* CF RDY */
|
|
};
|
|
|
|
/*
|
|
* DM9k MSCx settings: SRAM, 16 bits
|
|
* 17 cycles delay first access
|
|
* 5 cycles delay next access
|
|
* 13 cycles recovery time
|
|
* faster device
|
|
*/
|
|
#define DM9K_MSC_VALUE 0xe4c9
|
|
|
|
static void __init zeus_init(void)
|
|
{
|
|
u16 dm9000_msc = DM9K_MSC_VALUE;
|
|
u32 msc0, msc1;
|
|
|
|
system_rev = __raw_readw(ZEUS_CPLD_VERSION);
|
|
pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
|
|
|
|
/* Fix timings for dm9000s (CS1/CS2)*/
|
|
msc0 = (__raw_readl(MSC0) & 0x0000ffff) | (dm9000_msc << 16);
|
|
msc1 = (__raw_readl(MSC1) & 0xffff0000) | dm9000_msc;
|
|
__raw_writel(msc0, MSC0);
|
|
__raw_writel(msc1, MSC1);
|
|
|
|
pm_power_off = zeus_power_off;
|
|
zeus_setup_apm();
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
|
|
|
|
platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
|
|
|
|
zeus_register_ohci();
|
|
|
|
if (zeus_setup_fb_gpios())
|
|
pr_err("Failed to setup fb gpios\n");
|
|
else
|
|
pxa_set_fb_info(NULL, &zeus_fb_info);
|
|
|
|
pxa_set_mci_info(&zeus_mci_platform_data);
|
|
pxa_set_udc_info(&zeus_udc_info);
|
|
pxa_set_ac97_info(&zeus_ac97_info);
|
|
pxa_set_i2c_info(NULL);
|
|
i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
|
|
pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
|
|
spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
|
|
|
|
regulator_has_full_constraints();
|
|
}
|
|
|
|
static struct map_desc zeus_io_desc[] __initdata = {
|
|
{
|
|
.virtual = (unsigned long)ZEUS_CPLD_VERSION,
|
|
.pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
|
|
.length = 0x1000,
|
|
.type = MT_DEVICE,
|
|
},
|
|
{
|
|
.virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
|
|
.pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
|
|
.length = 0x1000,
|
|
.type = MT_DEVICE,
|
|
},
|
|
{
|
|
.virtual = (unsigned long)ZEUS_CPLD_CONTROL,
|
|
.pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
|
|
.length = 0x1000,
|
|
.type = MT_DEVICE,
|
|
},
|
|
{
|
|
.virtual = (unsigned long)ZEUS_PC104IO,
|
|
.pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS),
|
|
.length = 0x00800000,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
static void __init zeus_map_io(void)
|
|
{
|
|
pxa27x_map_io();
|
|
|
|
iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
|
|
|
|
/* Clear PSPR to ensure a full restart on wake-up. */
|
|
PMCR = PSPR = 0;
|
|
|
|
/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
|
|
writel(readl(OSCC) | OSCC_OON, OSCC);
|
|
|
|
/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
|
|
* float chip selects and PCMCIA */
|
|
PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
|
|
}
|
|
|
|
MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
|
|
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
|
|
.atag_offset = 0x100,
|
|
.map_io = zeus_map_io,
|
|
.nr_irqs = ZEUS_NR_IRQS,
|
|
.init_irq = zeus_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = zeus_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|
|
|