mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Joe Perches](/assets/img/avatar_default.png)
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2095 lines
60 KiB
C
2095 lines
60 KiB
C
/* depca.c: A DIGITAL DEPCA & EtherWORKS ethernet driver for linux.
|
|
|
|
Written 1994, 1995 by David C. Davies.
|
|
|
|
|
|
Copyright 1994 David C. Davies
|
|
and
|
|
United States Government
|
|
(as represented by the Director, National Security Agency).
|
|
|
|
Copyright 1995 Digital Equipment Corporation.
|
|
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License, incorporated herein by reference.
|
|
|
|
This driver is written for the Digital Equipment Corporation series
|
|
of DEPCA and EtherWORKS ethernet cards:
|
|
|
|
DEPCA (the original)
|
|
DE100
|
|
DE101
|
|
DE200 Turbo
|
|
DE201 Turbo
|
|
DE202 Turbo (TP BNC)
|
|
DE210
|
|
DE422 (EISA)
|
|
|
|
The driver has been tested on DE100, DE200 and DE202 cards in a
|
|
relatively busy network. The DE422 has been tested a little.
|
|
|
|
This driver will NOT work for the DE203, DE204 and DE205 series of
|
|
cards, since they have a new custom ASIC in place of the AMD LANCE
|
|
chip. See the 'ewrk3.c' driver in the Linux source tree for running
|
|
those cards.
|
|
|
|
I have benchmarked the driver with a DE100 at 595kB/s to (542kB/s from)
|
|
a DECstation 5000/200.
|
|
|
|
The author may be reached at davies@maniac.ultranet.com
|
|
|
|
=========================================================================
|
|
|
|
The driver was originally based on the 'lance.c' driver from Donald
|
|
Becker which is included with the standard driver distribution for
|
|
linux. V0.4 is a complete re-write with only the kernel interface
|
|
remaining from the original code.
|
|
|
|
1) Lance.c code in /linux/drivers/net/
|
|
2) "Ethernet/IEEE 802.3 Family. 1992 World Network Data Book/Handbook",
|
|
AMD, 1992 [(800) 222-9323].
|
|
3) "Am79C90 CMOS Local Area Network Controller for Ethernet (C-LANCE)",
|
|
AMD, Pub. #17881, May 1993.
|
|
4) "Am79C960 PCnet-ISA(tm), Single-Chip Ethernet Controller for ISA",
|
|
AMD, Pub. #16907, May 1992
|
|
5) "DEC EtherWORKS LC Ethernet Controller Owners Manual",
|
|
Digital Equipment corporation, 1990, Pub. #EK-DE100-OM.003
|
|
6) "DEC EtherWORKS Turbo Ethernet Controller Owners Manual",
|
|
Digital Equipment corporation, 1990, Pub. #EK-DE200-OM.003
|
|
7) "DEPCA Hardware Reference Manual", Pub. #EK-DEPCA-PR
|
|
Digital Equipment Corporation, 1989
|
|
8) "DEC EtherWORKS Turbo_(TP BNC) Ethernet Controller Owners Manual",
|
|
Digital Equipment corporation, 1991, Pub. #EK-DE202-OM.001
|
|
|
|
|
|
Peter Bauer's depca.c (V0.5) was referred to when debugging V0.1 of this
|
|
driver.
|
|
|
|
The original DEPCA card requires that the ethernet ROM address counter
|
|
be enabled to count and has an 8 bit NICSR. The ROM counter enabling is
|
|
only done when a 0x08 is read as the first address octet (to minimise
|
|
the chances of writing over some other hardware's I/O register). The
|
|
NICSR accesses have been changed to byte accesses for all the cards
|
|
supported by this driver, since there is only one useful bit in the MSB
|
|
(remote boot timeout) and it is not used. Also, there is a maximum of
|
|
only 48kB network RAM for this card. My thanks to Torbjorn Lindh for
|
|
help debugging all this (and holding my feet to the fire until I got it
|
|
right).
|
|
|
|
The DE200 series boards have on-board 64kB RAM for use as a shared
|
|
memory network buffer. Only the DE100 cards make use of a 2kB buffer
|
|
mode which has not been implemented in this driver (only the 32kB and
|
|
64kB modes are supported [16kB/48kB for the original DEPCA]).
|
|
|
|
At the most only 2 DEPCA cards can be supported on the ISA bus because
|
|
there is only provision for two I/O base addresses on each card (0x300
|
|
and 0x200). The I/O address is detected by searching for a byte sequence
|
|
in the Ethernet station address PROM at the expected I/O address for the
|
|
Ethernet PROM. The shared memory base address is 'autoprobed' by
|
|
looking for the self test PROM and detecting the card name. When a
|
|
second DEPCA is detected, information is placed in the base_addr
|
|
variable of the next device structure (which is created if necessary),
|
|
thus enabling ethif_probe initialization for the device. More than 2
|
|
EISA cards can be supported, but care will be needed assigning the
|
|
shared memory to ensure that each slot has the correct IRQ, I/O address
|
|
and shared memory address assigned.
|
|
|
|
************************************************************************
|
|
|
|
NOTE: If you are using two ISA DEPCAs, it is important that you assign
|
|
the base memory addresses correctly. The driver autoprobes I/O 0x300
|
|
then 0x200. The base memory address for the first device must be less
|
|
than that of the second so that the auto probe will correctly assign the
|
|
I/O and memory addresses on the same card. I can't think of a way to do
|
|
this unambiguously at the moment, since there is nothing on the cards to
|
|
tie I/O and memory information together.
|
|
|
|
I am unable to test 2 cards together for now, so this code is
|
|
unchecked. All reports, good or bad, are welcome.
|
|
|
|
************************************************************************
|
|
|
|
The board IRQ setting must be at an unused IRQ which is auto-probed
|
|
using Donald Becker's autoprobe routines. DEPCA and DE100 board IRQs are
|
|
{2,3,4,5,7}, whereas the DE200 is at {5,9,10,11,15}. Note that IRQ2 is
|
|
really IRQ9 in machines with 16 IRQ lines.
|
|
|
|
No 16MB memory limitation should exist with this driver as DMA is not
|
|
used and the common memory area is in low memory on the network card (my
|
|
current system has 20MB and I've not had problems yet).
|
|
|
|
The ability to load this driver as a loadable module has been added. To
|
|
utilise this ability, you have to do <8 things:
|
|
|
|
0) have a copy of the loadable modules code installed on your system.
|
|
1) copy depca.c from the /linux/drivers/net directory to your favourite
|
|
temporary directory.
|
|
2) if you wish, edit the source code near line 1530 to reflect the I/O
|
|
address and IRQ you're using (see also 5).
|
|
3) compile depca.c, but include -DMODULE in the command line to ensure
|
|
that the correct bits are compiled (see end of source code).
|
|
4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
|
|
kernel with the depca configuration turned off and reboot.
|
|
5) insmod depca.o [irq=7] [io=0x200] [mem=0xd0000] [adapter_name=DE100]
|
|
[Alan Cox: Changed the code to allow command line irq/io assignments]
|
|
[Dave Davies: Changed the code to allow command line mem/name
|
|
assignments]
|
|
6) run the net startup bits for your eth?? interface manually
|
|
(usually /etc/rc.inet[12] at boot time).
|
|
7) enjoy!
|
|
|
|
Note that autoprobing is not allowed in loadable modules - the system is
|
|
already up and running and you're messing with interrupts.
|
|
|
|
To unload a module, turn off the associated interface
|
|
'ifconfig eth?? down' then 'rmmod depca'.
|
|
|
|
To assign a base memory address for the shared memory when running as a
|
|
loadable module, see 5 above. To include the adapter name (if you have
|
|
no PROM but know the card name) also see 5 above. Note that this last
|
|
option will not work with kernel built-in depca's.
|
|
|
|
The shared memory assignment for a loadable module makes sense to avoid
|
|
the 'memory autoprobe' picking the wrong shared memory (for the case of
|
|
2 depca's in a PC).
|
|
|
|
************************************************************************
|
|
Support for MCA EtherWORKS cards added 11-3-98.
|
|
Verified to work with up to 2 DE212 cards in a system (although not
|
|
fully stress-tested).
|
|
|
|
Currently known bugs/limitations:
|
|
|
|
Note: with the MCA stuff as a module, it trusts the MCA configuration,
|
|
not the command line for IRQ and memory address. You can
|
|
specify them if you want, but it will throw your values out.
|
|
You still have to pass the IO address it was configured as
|
|
though.
|
|
|
|
************************************************************************
|
|
TO DO:
|
|
------
|
|
|
|
|
|
Revision History
|
|
----------------
|
|
|
|
Version Date Description
|
|
|
|
0.1 25-jan-94 Initial writing.
|
|
0.2 27-jan-94 Added LANCE TX hardware buffer chaining.
|
|
0.3 1-feb-94 Added multiple DEPCA support.
|
|
0.31 4-feb-94 Added DE202 recognition.
|
|
0.32 19-feb-94 Tidy up. Improve multi-DEPCA support.
|
|
0.33 25-feb-94 Fix DEPCA ethernet ROM counter enable.
|
|
Add jabber packet fix from murf@perftech.com
|
|
and becker@super.org
|
|
0.34 7-mar-94 Fix DEPCA max network memory RAM & NICSR access.
|
|
0.35 8-mar-94 Added DE201 recognition. Tidied up.
|
|
0.351 30-apr-94 Added EISA support. Added DE422 recognition.
|
|
0.36 16-may-94 DE422 fix released.
|
|
0.37 22-jul-94 Added MODULE support
|
|
0.38 15-aug-94 Added DBR ROM switch in depca_close().
|
|
Multi DEPCA bug fix.
|
|
0.38axp 15-sep-94 Special version for Alpha AXP Linux V1.0.
|
|
0.381 12-dec-94 Added DE101 recognition, fix multicast bug.
|
|
0.382 9-feb-95 Fix recognition bug reported by <bkm@star.rl.ac.uk>.
|
|
0.383 22-feb-95 Fix for conflict with VESA SCSI reported by
|
|
<stromain@alf.dec.com>
|
|
0.384 17-mar-95 Fix a ring full bug reported by <bkm@star.rl.ac.uk>
|
|
0.385 3-apr-95 Fix a recognition bug reported by
|
|
<ryan.niemi@lastfrontier.com>
|
|
0.386 21-apr-95 Fix the last fix...sorry, must be galloping senility
|
|
0.40 25-May-95 Rewrite for portability & updated.
|
|
ALPHA support from <jestabro@amt.tay1.dec.com>
|
|
0.41 26-Jun-95 Added verify_area() calls in depca_ioctl() from
|
|
suggestion by <heiko@colossus.escape.de>
|
|
0.42 27-Dec-95 Add 'mem' shared memory assignment for loadable
|
|
modules.
|
|
Add 'adapter_name' for loadable modules when no PROM.
|
|
Both above from a suggestion by
|
|
<pchen@woodruffs121.residence.gatech.edu>.
|
|
Add new multicasting code.
|
|
0.421 22-Apr-96 Fix alloc_device() bug <jari@markkus2.fimr.fi>
|
|
0.422 29-Apr-96 Fix depca_hw_init() bug <jari@markkus2.fimr.fi>
|
|
0.423 7-Jun-96 Fix module load bug <kmg@barco.be>
|
|
0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c
|
|
0.44 1-Sep-97 Fix *_probe() to test check_region() first - bug
|
|
reported by <mmogilvi@elbert.uccs.edu>
|
|
0.45 3-Nov-98 Added support for MCA EtherWORKS (DE210/DE212) cards
|
|
by <tymm@computer.org>
|
|
0.451 5-Nov-98 Fixed mca stuff cuz I'm a dummy. <tymm@computer.org>
|
|
0.5 14-Nov-98 Re-spin for 2.1.x kernels.
|
|
0.51 27-Jun-99 Correct received packet length for CRC from
|
|
report by <worm@dkik.dk>
|
|
0.52 16-Oct-00 Fixes for 2.3 io memory accesses
|
|
Fix show-stopper (ints left masked) in depca_interrupt
|
|
by <peterd@pnd-pc.demon.co.uk>
|
|
0.53 12-Jan-01 Release resources on failure, bss tidbits
|
|
by acme@conectiva.com.br
|
|
0.54 08-Nov-01 use library crc32 functions
|
|
by Matt_Domsch@dell.com
|
|
0.55 01-Mar-03 Use EISA/sysfs framework <maz@wild-wind.fr.eu.org>
|
|
|
|
=========================================================================
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/time.h>
|
|
#include <linux/types.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
|
|
#ifdef CONFIG_MCA
|
|
#include <linux/mca.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_EISA
|
|
#include <linux/eisa.h>
|
|
#endif
|
|
|
|
#include "depca.h"
|
|
|
|
static char version[] __initdata = "depca.c:v0.53 2001/1/12 davies@maniac.ultranet.com\n";
|
|
|
|
#ifdef DEPCA_DEBUG
|
|
static int depca_debug = DEPCA_DEBUG;
|
|
#else
|
|
static int depca_debug = 1;
|
|
#endif
|
|
|
|
#define DEPCA_NDA 0xffe0 /* No Device Address */
|
|
|
|
#define TX_TIMEOUT (1*HZ)
|
|
|
|
/*
|
|
** Ethernet PROM defines
|
|
*/
|
|
#define PROBE_LENGTH 32
|
|
#define ETH_PROM_SIG 0xAA5500FFUL
|
|
|
|
/*
|
|
** Set the number of Tx and Rx buffers. Ensure that the memory requested
|
|
** here is <= to the amount of shared memory set up by the board switches.
|
|
** The number of descriptors MUST BE A POWER OF 2.
|
|
**
|
|
** total_memory = NUM_RX_DESC*(8+RX_BUFF_SZ) + NUM_TX_DESC*(8+TX_BUFF_SZ)
|
|
*/
|
|
#define NUM_RX_DESC 8 /* Number of RX descriptors */
|
|
#define NUM_TX_DESC 8 /* Number of TX descriptors */
|
|
#define RX_BUFF_SZ 1536 /* Buffer size for each Rx buffer */
|
|
#define TX_BUFF_SZ 1536 /* Buffer size for each Tx buffer */
|
|
|
|
/*
|
|
** EISA bus defines
|
|
*/
|
|
#define DEPCA_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */
|
|
|
|
/*
|
|
** ISA Bus defines
|
|
*/
|
|
#define DEPCA_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0xe0000,0x00000}
|
|
#define DEPCA_TOTAL_SIZE 0x10
|
|
|
|
static struct {
|
|
u_long iobase;
|
|
struct platform_device *device;
|
|
} depca_io_ports[] = {
|
|
{ 0x300, NULL },
|
|
{ 0x200, NULL },
|
|
{ 0 , NULL },
|
|
};
|
|
|
|
/*
|
|
** Name <-> Adapter mapping
|
|
*/
|
|
#define DEPCA_SIGNATURE {"DEPCA",\
|
|
"DE100","DE101",\
|
|
"DE200","DE201","DE202",\
|
|
"DE210","DE212",\
|
|
"DE422",\
|
|
""}
|
|
|
|
static char* __initdata depca_signature[] = DEPCA_SIGNATURE;
|
|
|
|
enum depca_type {
|
|
DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown
|
|
};
|
|
|
|
static char depca_string[] = "depca";
|
|
|
|
static int depca_device_remove (struct device *device);
|
|
|
|
#ifdef CONFIG_EISA
|
|
static struct eisa_device_id depca_eisa_ids[] = {
|
|
{ "DEC4220", de422 },
|
|
{ "" }
|
|
};
|
|
MODULE_DEVICE_TABLE(eisa, depca_eisa_ids);
|
|
|
|
static int depca_eisa_probe (struct device *device);
|
|
|
|
static struct eisa_driver depca_eisa_driver = {
|
|
.id_table = depca_eisa_ids,
|
|
.driver = {
|
|
.name = depca_string,
|
|
.probe = depca_eisa_probe,
|
|
.remove = __devexit_p (depca_device_remove)
|
|
}
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_MCA
|
|
/*
|
|
** Adapter ID for the MCA EtherWORKS DE210/212 adapter
|
|
*/
|
|
#define DE210_ID 0x628d
|
|
#define DE212_ID 0x6def
|
|
|
|
static short depca_mca_adapter_ids[] = {
|
|
DE210_ID,
|
|
DE212_ID,
|
|
0x0000
|
|
};
|
|
|
|
static char *depca_mca_adapter_name[] = {
|
|
"DEC EtherWORKS MC Adapter (DE210)",
|
|
"DEC EtherWORKS MC Adapter (DE212)",
|
|
NULL
|
|
};
|
|
|
|
static enum depca_type depca_mca_adapter_type[] = {
|
|
de210,
|
|
de212,
|
|
0
|
|
};
|
|
|
|
static int depca_mca_probe (struct device *);
|
|
|
|
static struct mca_driver depca_mca_driver = {
|
|
.id_table = depca_mca_adapter_ids,
|
|
.driver = {
|
|
.name = depca_string,
|
|
.bus = &mca_bus_type,
|
|
.probe = depca_mca_probe,
|
|
.remove = __devexit_p(depca_device_remove),
|
|
},
|
|
};
|
|
#endif
|
|
|
|
static int depca_isa_probe (struct platform_device *);
|
|
|
|
static int __devexit depca_isa_remove(struct platform_device *pdev)
|
|
{
|
|
return depca_device_remove(&pdev->dev);
|
|
}
|
|
|
|
static struct platform_driver depca_isa_driver = {
|
|
.probe = depca_isa_probe,
|
|
.remove = __devexit_p(depca_isa_remove),
|
|
.driver = {
|
|
.name = depca_string,
|
|
},
|
|
};
|
|
|
|
/*
|
|
** Miscellaneous info...
|
|
*/
|
|
#define DEPCA_STRLEN 16
|
|
|
|
/*
|
|
** Memory Alignment. Each descriptor is 4 longwords long. To force a
|
|
** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
|
|
** DESC_ALIGN. DEPCA_ALIGN aligns the start address of the private memory area
|
|
** and hence the RX descriptor ring's first entry.
|
|
*/
|
|
#define DEPCA_ALIGN4 ((u_long)4 - 1) /* 1 longword align */
|
|
#define DEPCA_ALIGN8 ((u_long)8 - 1) /* 2 longword (quadword) align */
|
|
#define DEPCA_ALIGN DEPCA_ALIGN8 /* Keep the LANCE happy... */
|
|
|
|
/*
|
|
** The DEPCA Rx and Tx ring descriptors.
|
|
*/
|
|
struct depca_rx_desc {
|
|
volatile s32 base;
|
|
s16 buf_length; /* This length is negative 2's complement! */
|
|
s16 msg_length; /* This length is "normal". */
|
|
};
|
|
|
|
struct depca_tx_desc {
|
|
volatile s32 base;
|
|
s16 length; /* This length is negative 2's complement! */
|
|
s16 misc; /* Errors and TDR info */
|
|
};
|
|
|
|
#define LA_MASK 0x0000ffff /* LANCE address mask for mapping network RAM
|
|
to LANCE memory address space */
|
|
|
|
/*
|
|
** The Lance initialization block, described in databook, in common memory.
|
|
*/
|
|
struct depca_init {
|
|
u16 mode; /* Mode register */
|
|
u8 phys_addr[ETH_ALEN]; /* Physical ethernet address */
|
|
u8 mcast_table[8]; /* Multicast Hash Table. */
|
|
u32 rx_ring; /* Rx ring base pointer & ring length */
|
|
u32 tx_ring; /* Tx ring base pointer & ring length */
|
|
};
|
|
|
|
#define DEPCA_PKT_STAT_SZ 16
|
|
#define DEPCA_PKT_BIN_SZ 128 /* Should be >=100 unless you
|
|
increase DEPCA_PKT_STAT_SZ */
|
|
struct depca_private {
|
|
char adapter_name[DEPCA_STRLEN]; /* /proc/ioports string */
|
|
enum depca_type adapter; /* Adapter type */
|
|
enum {
|
|
DEPCA_BUS_MCA = 1,
|
|
DEPCA_BUS_ISA,
|
|
DEPCA_BUS_EISA,
|
|
} depca_bus; /* type of bus */
|
|
struct depca_init init_block; /* Shadow Initialization block */
|
|
/* CPU address space fields */
|
|
struct depca_rx_desc __iomem *rx_ring; /* Pointer to start of RX descriptor ring */
|
|
struct depca_tx_desc __iomem *tx_ring; /* Pointer to start of TX descriptor ring */
|
|
void __iomem *rx_buff[NUM_RX_DESC]; /* CPU virt address of sh'd memory buffs */
|
|
void __iomem *tx_buff[NUM_TX_DESC]; /* CPU virt address of sh'd memory buffs */
|
|
void __iomem *sh_mem; /* CPU mapped virt address of device RAM */
|
|
u_long mem_start; /* Bus address of device RAM (before remap) */
|
|
u_long mem_len; /* device memory size */
|
|
/* Device address space fields */
|
|
u_long device_ram_start; /* Start of RAM in device addr space */
|
|
/* Offsets used in both address spaces */
|
|
u_long rx_ring_offset; /* Offset from start of RAM to rx_ring */
|
|
u_long tx_ring_offset; /* Offset from start of RAM to tx_ring */
|
|
u_long buffs_offset; /* LANCE Rx and Tx buffers start address. */
|
|
/* Kernel-only (not device) fields */
|
|
int rx_new, tx_new; /* The next free ring entry */
|
|
int rx_old, tx_old; /* The ring entries to be free()ed. */
|
|
spinlock_t lock;
|
|
struct { /* Private stats counters */
|
|
u32 bins[DEPCA_PKT_STAT_SZ];
|
|
u32 unicast;
|
|
u32 multicast;
|
|
u32 broadcast;
|
|
u32 excessive_collisions;
|
|
u32 tx_underruns;
|
|
u32 excessive_underruns;
|
|
} pktStats;
|
|
int txRingMask; /* TX ring mask */
|
|
int rxRingMask; /* RX ring mask */
|
|
s32 rx_rlen; /* log2(rxRingMask+1) for the descriptors */
|
|
s32 tx_rlen; /* log2(txRingMask+1) for the descriptors */
|
|
};
|
|
|
|
/*
|
|
** The transmit ring full condition is described by the tx_old and tx_new
|
|
** pointers by:
|
|
** tx_old = tx_new Empty ring
|
|
** tx_old = tx_new+1 Full ring
|
|
** tx_old+txRingMask = tx_new Full ring (wrapped condition)
|
|
*/
|
|
#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
|
|
lp->tx_old+lp->txRingMask-lp->tx_new:\
|
|
lp->tx_old -lp->tx_new-1)
|
|
|
|
/*
|
|
** Public Functions
|
|
*/
|
|
static int depca_open(struct net_device *dev);
|
|
static int depca_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t depca_interrupt(int irq, void *dev_id);
|
|
static int depca_close(struct net_device *dev);
|
|
static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static void depca_tx_timeout(struct net_device *dev);
|
|
static void set_multicast_list(struct net_device *dev);
|
|
|
|
/*
|
|
** Private functions
|
|
*/
|
|
static void depca_init_ring(struct net_device *dev);
|
|
static int depca_rx(struct net_device *dev);
|
|
static int depca_tx(struct net_device *dev);
|
|
|
|
static void LoadCSRs(struct net_device *dev);
|
|
static int InitRestartDepca(struct net_device *dev);
|
|
static int DepcaSignature(char *name, u_long paddr);
|
|
static int DevicePresent(u_long ioaddr);
|
|
static int get_hw_addr(struct net_device *dev);
|
|
static void SetMulticastFilter(struct net_device *dev);
|
|
static int load_packet(struct net_device *dev, struct sk_buff *skb);
|
|
static void depca_dbg_open(struct net_device *dev);
|
|
|
|
static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 };
|
|
static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 };
|
|
static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 };
|
|
static u_char *depca_irq;
|
|
|
|
static int irq;
|
|
static int io;
|
|
static char *adapter_name;
|
|
static int mem; /* For loadable module assignment
|
|
use insmod mem=0x????? .... */
|
|
module_param (irq, int, 0);
|
|
module_param (io, int, 0);
|
|
module_param (adapter_name, charp, 0);
|
|
module_param (mem, int, 0);
|
|
MODULE_PARM_DESC(irq, "DEPCA IRQ number");
|
|
MODULE_PARM_DESC(io, "DEPCA I/O base address");
|
|
MODULE_PARM_DESC(adapter_name, "DEPCA adapter name");
|
|
MODULE_PARM_DESC(mem, "DEPCA shared memory address");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
** Miscellaneous defines...
|
|
*/
|
|
#define STOP_DEPCA \
|
|
outw(CSR0, DEPCA_ADDR);\
|
|
outw(STOP, DEPCA_DATA)
|
|
|
|
static int __init depca_hw_init (struct net_device *dev, struct device *device)
|
|
{
|
|
struct depca_private *lp;
|
|
int i, j, offset, netRAM, mem_len, status = 0;
|
|
s16 nicsr;
|
|
u_long ioaddr;
|
|
u_long mem_start;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
/*
|
|
* We are now supposed to enter this function with the
|
|
* following fields filled with proper values :
|
|
*
|
|
* dev->base_addr
|
|
* lp->mem_start
|
|
* lp->depca_bus
|
|
* lp->adapter
|
|
*
|
|
* dev->irq can be set if known from device configuration (on
|
|
* MCA or EISA) or module option. Otherwise, it will be auto
|
|
* detected.
|
|
*/
|
|
|
|
ioaddr = dev->base_addr;
|
|
|
|
STOP_DEPCA;
|
|
|
|
nicsr = inb(DEPCA_NICSR);
|
|
nicsr = ((nicsr & ~SHE & ~RBE & ~IEN) | IM);
|
|
outb(nicsr, DEPCA_NICSR);
|
|
|
|
if (inw(DEPCA_DATA) != STOP) {
|
|
return -ENXIO;
|
|
}
|
|
|
|
lp = (struct depca_private *) dev->priv;
|
|
mem_start = lp->mem_start;
|
|
|
|
if (!mem_start || lp->adapter < DEPCA || lp->adapter >=unknown)
|
|
return -ENXIO;
|
|
|
|
printk ("%s: %s at 0x%04lx",
|
|
device->bus_id, depca_signature[lp->adapter], ioaddr);
|
|
|
|
switch (lp->depca_bus) {
|
|
#ifdef CONFIG_MCA
|
|
case DEPCA_BUS_MCA:
|
|
printk(" (MCA slot %d)", to_mca_device(device)->slot + 1);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef CONFIG_EISA
|
|
case DEPCA_BUS_EISA:
|
|
printk(" (EISA slot %d)", to_eisa_device(device)->slot);
|
|
break;
|
|
#endif
|
|
|
|
case DEPCA_BUS_ISA:
|
|
break;
|
|
|
|
default:
|
|
printk("Unknown DEPCA bus %d\n", lp->depca_bus);
|
|
return -ENXIO;
|
|
}
|
|
|
|
printk(", h/w address ");
|
|
status = get_hw_addr(dev);
|
|
printk("%s", print_mac(mac, dev->dev_addr));
|
|
if (status != 0) {
|
|
printk(" which has an Ethernet PROM CRC error.\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Set up the maximum amount of network RAM(kB) */
|
|
netRAM = ((lp->adapter != DEPCA) ? 64 : 48);
|
|
if ((nicsr & _128KB) && (lp->adapter == de422))
|
|
netRAM = 128;
|
|
|
|
/* Shared Memory Base Address */
|
|
if (nicsr & BUF) {
|
|
nicsr &= ~BS; /* DEPCA RAM in top 32k */
|
|
netRAM -= 32;
|
|
|
|
/* Only EISA/ISA needs start address to be re-computed */
|
|
if (lp->depca_bus != DEPCA_BUS_MCA)
|
|
mem_start += 0x8000;
|
|
}
|
|
|
|
if ((mem_len = (NUM_RX_DESC * (sizeof(struct depca_rx_desc) + RX_BUFF_SZ) + NUM_TX_DESC * (sizeof(struct depca_tx_desc) + TX_BUFF_SZ) + sizeof(struct depca_init)))
|
|
> (netRAM << 10)) {
|
|
printk(",\n requests %dkB RAM: only %dkB is available!\n", (mem_len >> 10), netRAM);
|
|
return -ENXIO;
|
|
}
|
|
|
|
printk(",\n has %dkB RAM at 0x%.5lx", netRAM, mem_start);
|
|
|
|
/* Enable the shadow RAM. */
|
|
if (lp->adapter != DEPCA) {
|
|
nicsr |= SHE;
|
|
outb(nicsr, DEPCA_NICSR);
|
|
}
|
|
|
|
spin_lock_init(&lp->lock);
|
|
sprintf(lp->adapter_name, "%s (%s)",
|
|
depca_signature[lp->adapter], device->bus_id);
|
|
status = -EBUSY;
|
|
|
|
/* Initialisation Block */
|
|
if (!request_mem_region (mem_start, mem_len, lp->adapter_name)) {
|
|
printk(KERN_ERR "depca: cannot request ISA memory, aborting\n");
|
|
goto out_priv;
|
|
}
|
|
|
|
status = -EIO;
|
|
lp->sh_mem = ioremap(mem_start, mem_len);
|
|
if (lp->sh_mem == NULL) {
|
|
printk(KERN_ERR "depca: cannot remap ISA memory, aborting\n");
|
|
goto out1;
|
|
}
|
|
|
|
lp->mem_start = mem_start;
|
|
lp->mem_len = mem_len;
|
|
lp->device_ram_start = mem_start & LA_MASK;
|
|
|
|
offset = 0;
|
|
offset += sizeof(struct depca_init);
|
|
|
|
/* Tx & Rx descriptors (aligned to a quadword boundary) */
|
|
offset = (offset + DEPCA_ALIGN) & ~DEPCA_ALIGN;
|
|
lp->rx_ring = (struct depca_rx_desc __iomem *) (lp->sh_mem + offset);
|
|
lp->rx_ring_offset = offset;
|
|
|
|
offset += (sizeof(struct depca_rx_desc) * NUM_RX_DESC);
|
|
lp->tx_ring = (struct depca_tx_desc __iomem *) (lp->sh_mem + offset);
|
|
lp->tx_ring_offset = offset;
|
|
|
|
offset += (sizeof(struct depca_tx_desc) * NUM_TX_DESC);
|
|
|
|
lp->buffs_offset = offset;
|
|
|
|
/* Finish initialising the ring information. */
|
|
lp->rxRingMask = NUM_RX_DESC - 1;
|
|
lp->txRingMask = NUM_TX_DESC - 1;
|
|
|
|
/* Calculate Tx/Rx RLEN size for the descriptors. */
|
|
for (i = 0, j = lp->rxRingMask; j > 0; i++) {
|
|
j >>= 1;
|
|
}
|
|
lp->rx_rlen = (s32) (i << 29);
|
|
for (i = 0, j = lp->txRingMask; j > 0; i++) {
|
|
j >>= 1;
|
|
}
|
|
lp->tx_rlen = (s32) (i << 29);
|
|
|
|
/* Load the initialisation block */
|
|
depca_init_ring(dev);
|
|
|
|
/* Initialise the control and status registers */
|
|
LoadCSRs(dev);
|
|
|
|
/* Enable DEPCA board interrupts for autoprobing */
|
|
nicsr = ((nicsr & ~IM) | IEN);
|
|
outb(nicsr, DEPCA_NICSR);
|
|
|
|
/* To auto-IRQ we enable the initialization-done and DMA err,
|
|
interrupts. For now we will always get a DMA error. */
|
|
if (dev->irq < 2) {
|
|
unsigned char irqnum;
|
|
unsigned long irq_mask, delay;
|
|
|
|
irq_mask = probe_irq_on();
|
|
|
|
/* Assign the correct irq list */
|
|
switch (lp->adapter) {
|
|
case DEPCA:
|
|
case de100:
|
|
case de101:
|
|
depca_irq = de1xx_irq;
|
|
break;
|
|
case de200:
|
|
case de201:
|
|
case de202:
|
|
case de210:
|
|
case de212:
|
|
depca_irq = de2xx_irq;
|
|
break;
|
|
case de422:
|
|
depca_irq = de422_irq;
|
|
break;
|
|
|
|
default:
|
|
break; /* Not reached */
|
|
}
|
|
|
|
/* Trigger an initialization just for the interrupt. */
|
|
outw(INEA | INIT, DEPCA_DATA);
|
|
|
|
delay = jiffies + HZ/50;
|
|
while (time_before(jiffies, delay))
|
|
yield();
|
|
|
|
irqnum = probe_irq_off(irq_mask);
|
|
|
|
status = -ENXIO;
|
|
if (!irqnum) {
|
|
printk(" and failed to detect IRQ line.\n");
|
|
goto out2;
|
|
} else {
|
|
for (dev->irq = 0, i = 0; (depca_irq[i]) && (!dev->irq); i++)
|
|
if (irqnum == depca_irq[i]) {
|
|
dev->irq = irqnum;
|
|
printk(" and uses IRQ%d.\n", dev->irq);
|
|
}
|
|
|
|
if (!dev->irq) {
|
|
printk(" but incorrect IRQ line detected.\n");
|
|
goto out2;
|
|
}
|
|
}
|
|
} else {
|
|
printk(" and assigned IRQ%d.\n", dev->irq);
|
|
}
|
|
|
|
if (depca_debug > 1) {
|
|
printk(version);
|
|
}
|
|
|
|
/* The DEPCA-specific entries in the device structure. */
|
|
dev->open = &depca_open;
|
|
dev->hard_start_xmit = &depca_start_xmit;
|
|
dev->stop = &depca_close;
|
|
dev->set_multicast_list = &set_multicast_list;
|
|
dev->do_ioctl = &depca_ioctl;
|
|
dev->tx_timeout = depca_tx_timeout;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
dev->mem_start = 0;
|
|
|
|
device->driver_data = dev;
|
|
SET_NETDEV_DEV (dev, device);
|
|
|
|
status = register_netdev(dev);
|
|
if (status == 0)
|
|
return 0;
|
|
out2:
|
|
iounmap(lp->sh_mem);
|
|
out1:
|
|
release_mem_region (mem_start, mem_len);
|
|
out_priv:
|
|
return status;
|
|
}
|
|
|
|
|
|
static int depca_open(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
u_long ioaddr = dev->base_addr;
|
|
s16 nicsr;
|
|
int status = 0;
|
|
|
|
STOP_DEPCA;
|
|
nicsr = inb(DEPCA_NICSR);
|
|
|
|
/* Make sure the shadow RAM is enabled */
|
|
if (lp->adapter != DEPCA) {
|
|
nicsr |= SHE;
|
|
outb(nicsr, DEPCA_NICSR);
|
|
}
|
|
|
|
/* Re-initialize the DEPCA... */
|
|
depca_init_ring(dev);
|
|
LoadCSRs(dev);
|
|
|
|
depca_dbg_open(dev);
|
|
|
|
if (request_irq(dev->irq, &depca_interrupt, 0, lp->adapter_name, dev)) {
|
|
printk("depca_open(): Requested IRQ%d is busy\n", dev->irq);
|
|
status = -EAGAIN;
|
|
} else {
|
|
|
|
/* Enable DEPCA board interrupts and turn off LED */
|
|
nicsr = ((nicsr & ~IM & ~LED) | IEN);
|
|
outb(nicsr, DEPCA_NICSR);
|
|
outw(CSR0, DEPCA_ADDR);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
status = InitRestartDepca(dev);
|
|
|
|
if (depca_debug > 1) {
|
|
printk("CSR0: 0x%4.4x\n", inw(DEPCA_DATA));
|
|
printk("nicsr: 0x%02x\n", inb(DEPCA_NICSR));
|
|
}
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/* Initialize the lance Rx and Tx descriptor rings. */
|
|
static void depca_init_ring(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
u_int i;
|
|
u_long offset;
|
|
|
|
/* Lock out other processes whilst setting up the hardware */
|
|
netif_stop_queue(dev);
|
|
|
|
lp->rx_new = lp->tx_new = 0;
|
|
lp->rx_old = lp->tx_old = 0;
|
|
|
|
/* Initialize the base address and length of each buffer in the ring */
|
|
for (i = 0; i <= lp->rxRingMask; i++) {
|
|
offset = lp->buffs_offset + i * RX_BUFF_SZ;
|
|
writel((lp->device_ram_start + offset) | R_OWN, &lp->rx_ring[i].base);
|
|
writew(-RX_BUFF_SZ, &lp->rx_ring[i].buf_length);
|
|
lp->rx_buff[i] = lp->sh_mem + offset;
|
|
}
|
|
|
|
for (i = 0; i <= lp->txRingMask; i++) {
|
|
offset = lp->buffs_offset + (i + lp->rxRingMask + 1) * TX_BUFF_SZ;
|
|
writel((lp->device_ram_start + offset) & 0x00ffffff, &lp->tx_ring[i].base);
|
|
lp->tx_buff[i] = lp->sh_mem + offset;
|
|
}
|
|
|
|
/* Set up the initialization block */
|
|
lp->init_block.rx_ring = (lp->device_ram_start + lp->rx_ring_offset) | lp->rx_rlen;
|
|
lp->init_block.tx_ring = (lp->device_ram_start + lp->tx_ring_offset) | lp->tx_rlen;
|
|
|
|
SetMulticastFilter(dev);
|
|
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
lp->init_block.phys_addr[i] = dev->dev_addr[i];
|
|
}
|
|
|
|
lp->init_block.mode = 0x0000; /* Enable the Tx and Rx */
|
|
}
|
|
|
|
|
|
static void depca_tx_timeout(struct net_device *dev)
|
|
{
|
|
u_long ioaddr = dev->base_addr;
|
|
|
|
printk("%s: transmit timed out, status %04x, resetting.\n", dev->name, inw(DEPCA_DATA));
|
|
|
|
STOP_DEPCA;
|
|
depca_init_ring(dev);
|
|
LoadCSRs(dev);
|
|
dev->trans_start = jiffies;
|
|
netif_wake_queue(dev);
|
|
InitRestartDepca(dev);
|
|
}
|
|
|
|
|
|
/*
|
|
** Writes a socket buffer to TX descriptor ring and starts transmission
|
|
*/
|
|
static int depca_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
u_long ioaddr = dev->base_addr;
|
|
int status = 0;
|
|
|
|
/* Transmitter timeout, serious problems. */
|
|
if (skb->len < 1)
|
|
goto out;
|
|
|
|
if (skb_padto(skb, ETH_ZLEN))
|
|
goto out;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (TX_BUFFS_AVAIL) { /* Fill in a Tx ring entry */
|
|
status = load_packet(dev, skb);
|
|
|
|
if (!status) {
|
|
/* Trigger an immediate send demand. */
|
|
outw(CSR0, DEPCA_ADDR);
|
|
outw(INEA | TDMD, DEPCA_DATA);
|
|
|
|
dev->trans_start = jiffies;
|
|
dev_kfree_skb(skb);
|
|
}
|
|
if (TX_BUFFS_AVAIL)
|
|
netif_start_queue(dev);
|
|
} else
|
|
status = -1;
|
|
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** The DEPCA interrupt handler.
|
|
*/
|
|
static irqreturn_t depca_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct depca_private *lp;
|
|
s16 csr0, nicsr;
|
|
u_long ioaddr;
|
|
|
|
if (dev == NULL) {
|
|
printk("depca_interrupt(): irq %d for unknown device.\n", irq);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
lp = (struct depca_private *) dev->priv;
|
|
ioaddr = dev->base_addr;
|
|
|
|
spin_lock(&lp->lock);
|
|
|
|
/* mask the DEPCA board interrupts and turn on the LED */
|
|
nicsr = inb(DEPCA_NICSR);
|
|
nicsr |= (IM | LED);
|
|
outb(nicsr, DEPCA_NICSR);
|
|
|
|
outw(CSR0, DEPCA_ADDR);
|
|
csr0 = inw(DEPCA_DATA);
|
|
|
|
/* Acknowledge all of the current interrupt sources ASAP. */
|
|
outw(csr0 & INTE, DEPCA_DATA);
|
|
|
|
if (csr0 & RINT) /* Rx interrupt (packet arrived) */
|
|
depca_rx(dev);
|
|
|
|
if (csr0 & TINT) /* Tx interrupt (packet sent) */
|
|
depca_tx(dev);
|
|
|
|
/* Any resources available? */
|
|
if ((TX_BUFFS_AVAIL >= 0) && netif_queue_stopped(dev)) {
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/* Unmask the DEPCA board interrupts and turn off the LED */
|
|
nicsr = (nicsr & ~IM & ~LED);
|
|
outb(nicsr, DEPCA_NICSR);
|
|
|
|
spin_unlock(&lp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Called with lp->lock held */
|
|
static int depca_rx(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
int i, entry;
|
|
s32 status;
|
|
|
|
for (entry = lp->rx_new; !(readl(&lp->rx_ring[entry].base) & R_OWN); entry = lp->rx_new) {
|
|
status = readl(&lp->rx_ring[entry].base) >> 16;
|
|
if (status & R_STP) { /* Remember start of frame */
|
|
lp->rx_old = entry;
|
|
}
|
|
if (status & R_ENP) { /* Valid frame status */
|
|
if (status & R_ERR) { /* There was an error. */
|
|
dev->stats.rx_errors++; /* Update the error stats. */
|
|
if (status & R_FRAM)
|
|
dev->stats.rx_frame_errors++;
|
|
if (status & R_OFLO)
|
|
dev->stats.rx_over_errors++;
|
|
if (status & R_CRC)
|
|
dev->stats.rx_crc_errors++;
|
|
if (status & R_BUFF)
|
|
dev->stats.rx_fifo_errors++;
|
|
} else {
|
|
short len, pkt_len = readw(&lp->rx_ring[entry].msg_length) - 4;
|
|
struct sk_buff *skb;
|
|
|
|
skb = dev_alloc_skb(pkt_len + 2);
|
|
if (skb != NULL) {
|
|
unsigned char *buf;
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
|
buf = skb_put(skb, pkt_len);
|
|
if (entry < lp->rx_old) { /* Wrapped buffer */
|
|
len = (lp->rxRingMask - lp->rx_old + 1) * RX_BUFF_SZ;
|
|
memcpy_fromio(buf, lp->rx_buff[lp->rx_old], len);
|
|
memcpy_fromio(buf + len, lp->rx_buff[0], pkt_len - len);
|
|
} else { /* Linear buffer */
|
|
memcpy_fromio(buf, lp->rx_buff[lp->rx_old], pkt_len);
|
|
}
|
|
|
|
/*
|
|
** Notify the upper protocol layers that there is another
|
|
** packet to handle
|
|
*/
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
|
|
/*
|
|
** Update stats
|
|
*/
|
|
dev->last_rx = jiffies;
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += pkt_len;
|
|
for (i = 1; i < DEPCA_PKT_STAT_SZ - 1; i++) {
|
|
if (pkt_len < (i * DEPCA_PKT_BIN_SZ)) {
|
|
lp->pktStats.bins[i]++;
|
|
i = DEPCA_PKT_STAT_SZ;
|
|
}
|
|
}
|
|
if (buf[0] & 0x01) { /* Multicast/Broadcast */
|
|
if ((*(s16 *) & buf[0] == -1) && (*(s16 *) & buf[2] == -1) && (*(s16 *) & buf[4] == -1)) {
|
|
lp->pktStats.broadcast++;
|
|
} else {
|
|
lp->pktStats.multicast++;
|
|
}
|
|
} else if ((*(s16 *) & buf[0] == *(s16 *) & dev->dev_addr[0]) && (*(s16 *) & buf[2] == *(s16 *) & dev->dev_addr[2]) && (*(s16 *) & buf[4] == *(s16 *) & dev->dev_addr[4])) {
|
|
lp->pktStats.unicast++;
|
|
}
|
|
|
|
lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */
|
|
if (lp->pktStats.bins[0] == 0) { /* Reset counters */
|
|
memset((char *) &lp->pktStats, 0, sizeof(lp->pktStats));
|
|
}
|
|
} else {
|
|
printk("%s: Memory squeeze, deferring packet.\n", dev->name);
|
|
dev->stats.rx_dropped++; /* Really, deferred. */
|
|
break;
|
|
}
|
|
}
|
|
/* Change buffer ownership for this last frame, back to the adapter */
|
|
for (; lp->rx_old != entry; lp->rx_old = (++lp->rx_old) & lp->rxRingMask) {
|
|
writel(readl(&lp->rx_ring[lp->rx_old].base) | R_OWN, &lp->rx_ring[lp->rx_old].base);
|
|
}
|
|
writel(readl(&lp->rx_ring[entry].base) | R_OWN, &lp->rx_ring[entry].base);
|
|
}
|
|
|
|
/*
|
|
** Update entry information
|
|
*/
|
|
lp->rx_new = (++lp->rx_new) & lp->rxRingMask;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
** Buffer sent - check for buffer errors.
|
|
** Called with lp->lock held
|
|
*/
|
|
static int depca_tx(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
int entry;
|
|
s32 status;
|
|
u_long ioaddr = dev->base_addr;
|
|
|
|
for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
|
|
status = readl(&lp->tx_ring[entry].base) >> 16;
|
|
|
|
if (status < 0) { /* Packet not yet sent! */
|
|
break;
|
|
} else if (status & T_ERR) { /* An error occurred. */
|
|
status = readl(&lp->tx_ring[entry].misc);
|
|
dev->stats.tx_errors++;
|
|
if (status & TMD3_RTRY)
|
|
dev->stats.tx_aborted_errors++;
|
|
if (status & TMD3_LCAR)
|
|
dev->stats.tx_carrier_errors++;
|
|
if (status & TMD3_LCOL)
|
|
dev->stats.tx_window_errors++;
|
|
if (status & TMD3_UFLO)
|
|
dev->stats.tx_fifo_errors++;
|
|
if (status & (TMD3_BUFF | TMD3_UFLO)) {
|
|
/* Trigger an immediate send demand. */
|
|
outw(CSR0, DEPCA_ADDR);
|
|
outw(INEA | TDMD, DEPCA_DATA);
|
|
}
|
|
} else if (status & (T_MORE | T_ONE)) {
|
|
dev->stats.collisions++;
|
|
} else {
|
|
dev->stats.tx_packets++;
|
|
}
|
|
|
|
/* Update all the pointers */
|
|
lp->tx_old = (++lp->tx_old) & lp->txRingMask;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int depca_close(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
s16 nicsr;
|
|
u_long ioaddr = dev->base_addr;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
outw(CSR0, DEPCA_ADDR);
|
|
|
|
if (depca_debug > 1) {
|
|
printk("%s: Shutting down ethercard, status was %2.2x.\n", dev->name, inw(DEPCA_DATA));
|
|
}
|
|
|
|
/*
|
|
** We stop the DEPCA here -- it occasionally polls
|
|
** memory if we don't.
|
|
*/
|
|
outw(STOP, DEPCA_DATA);
|
|
|
|
/*
|
|
** Give back the ROM in case the user wants to go to DOS
|
|
*/
|
|
if (lp->adapter != DEPCA) {
|
|
nicsr = inb(DEPCA_NICSR);
|
|
nicsr &= ~SHE;
|
|
outb(nicsr, DEPCA_NICSR);
|
|
}
|
|
|
|
/*
|
|
** Free the associated irq
|
|
*/
|
|
free_irq(dev->irq, dev);
|
|
return 0;
|
|
}
|
|
|
|
static void LoadCSRs(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
u_long ioaddr = dev->base_addr;
|
|
|
|
outw(CSR1, DEPCA_ADDR); /* initialisation block address LSW */
|
|
outw((u16) lp->device_ram_start, DEPCA_DATA);
|
|
outw(CSR2, DEPCA_ADDR); /* initialisation block address MSW */
|
|
outw((u16) (lp->device_ram_start >> 16), DEPCA_DATA);
|
|
outw(CSR3, DEPCA_ADDR); /* ALE control */
|
|
outw(ACON, DEPCA_DATA);
|
|
|
|
outw(CSR0, DEPCA_ADDR); /* Point back to CSR0 */
|
|
|
|
return;
|
|
}
|
|
|
|
static int InitRestartDepca(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
u_long ioaddr = dev->base_addr;
|
|
int i, status = 0;
|
|
|
|
/* Copy the shadow init_block to shared memory */
|
|
memcpy_toio(lp->sh_mem, &lp->init_block, sizeof(struct depca_init));
|
|
|
|
outw(CSR0, DEPCA_ADDR); /* point back to CSR0 */
|
|
outw(INIT, DEPCA_DATA); /* initialize DEPCA */
|
|
|
|
/* wait for lance to complete initialisation */
|
|
for (i = 0; (i < 100) && !(inw(DEPCA_DATA) & IDON); i++);
|
|
|
|
if (i != 100) {
|
|
/* clear IDON by writing a "1", enable interrupts and start lance */
|
|
outw(IDON | INEA | STRT, DEPCA_DATA);
|
|
if (depca_debug > 2) {
|
|
printk("%s: DEPCA open after %d ticks, init block 0x%08lx csr0 %4.4x.\n", dev->name, i, lp->mem_start, inw(DEPCA_DATA));
|
|
}
|
|
} else {
|
|
printk("%s: DEPCA unopen after %d ticks, init block 0x%08lx csr0 %4.4x.\n", dev->name, i, lp->mem_start, inw(DEPCA_DATA));
|
|
status = -1;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** Set or clear the multicast filter for this adaptor.
|
|
*/
|
|
static void set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
u_long ioaddr = dev->base_addr;
|
|
|
|
netif_stop_queue(dev);
|
|
while (lp->tx_old != lp->tx_new); /* Wait for the ring to empty */
|
|
|
|
STOP_DEPCA; /* Temporarily stop the depca. */
|
|
depca_init_ring(dev); /* Initialize the descriptor rings */
|
|
|
|
if (dev->flags & IFF_PROMISC) { /* Set promiscuous mode */
|
|
lp->init_block.mode |= PROM;
|
|
} else {
|
|
SetMulticastFilter(dev);
|
|
lp->init_block.mode &= ~PROM; /* Unset promiscuous mode */
|
|
}
|
|
|
|
LoadCSRs(dev); /* Reload CSR3 */
|
|
InitRestartDepca(dev); /* Resume normal operation. */
|
|
netif_start_queue(dev); /* Unlock the TX ring */
|
|
}
|
|
|
|
/*
|
|
** Calculate the hash code and update the logical address filter
|
|
** from a list of ethernet multicast addresses.
|
|
** Big endian crc one liner is mine, all mine, ha ha ha ha!
|
|
** LANCE calculates its hash codes big endian.
|
|
*/
|
|
static void SetMulticastFilter(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
struct dev_mc_list *dmi = dev->mc_list;
|
|
char *addrs;
|
|
int i, j, bit, byte;
|
|
u16 hashcode;
|
|
u32 crc;
|
|
|
|
if (dev->flags & IFF_ALLMULTI) { /* Set all multicast bits */
|
|
for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) {
|
|
lp->init_block.mcast_table[i] = (char) 0xff;
|
|
}
|
|
} else {
|
|
for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { /* Clear the multicast table */
|
|
lp->init_block.mcast_table[i] = 0;
|
|
}
|
|
/* Add multicast addresses */
|
|
for (i = 0; i < dev->mc_count; i++) { /* for each address in the list */
|
|
addrs = dmi->dmi_addr;
|
|
dmi = dmi->next;
|
|
if ((*addrs & 0x01) == 1) { /* multicast address? */
|
|
crc = ether_crc(ETH_ALEN, addrs);
|
|
hashcode = (crc & 1); /* hashcode is 6 LSb of CRC ... */
|
|
for (j = 0; j < 5; j++) { /* ... in reverse order. */
|
|
hashcode = (hashcode << 1) | ((crc >>= 1) & 1);
|
|
}
|
|
|
|
|
|
byte = hashcode >> 3; /* bit[3-5] -> byte in filter */
|
|
bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */
|
|
lp->init_block.mcast_table[byte] |= bit;
|
|
}
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int __init depca_common_init (u_long ioaddr, struct net_device **devp)
|
|
{
|
|
int status = 0;
|
|
|
|
if (!request_region (ioaddr, DEPCA_TOTAL_SIZE, depca_string)) {
|
|
status = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
if (DevicePresent(ioaddr)) {
|
|
status = -ENODEV;
|
|
goto out_release;
|
|
}
|
|
|
|
if (!(*devp = alloc_etherdev (sizeof (struct depca_private)))) {
|
|
status = -ENOMEM;
|
|
goto out_release;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_release:
|
|
release_region (ioaddr, DEPCA_TOTAL_SIZE);
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
#ifdef CONFIG_MCA
|
|
/*
|
|
** Microchannel bus I/O device probe
|
|
*/
|
|
static int __init depca_mca_probe(struct device *device)
|
|
{
|
|
unsigned char pos[2];
|
|
unsigned char where;
|
|
unsigned long iobase, mem_start;
|
|
int irq, err;
|
|
struct mca_device *mdev = to_mca_device (device);
|
|
struct net_device *dev;
|
|
struct depca_private *lp;
|
|
|
|
/*
|
|
** Search for the adapter. If an address has been given, search
|
|
** specifically for the card at that address. Otherwise find the
|
|
** first card in the system.
|
|
*/
|
|
|
|
pos[0] = mca_device_read_stored_pos(mdev, 2);
|
|
pos[1] = mca_device_read_stored_pos(mdev, 3);
|
|
|
|
/*
|
|
** IO of card is handled by bits 1 and 2 of pos0.
|
|
**
|
|
** bit2 bit1 IO
|
|
** 0 0 0x2c00
|
|
** 0 1 0x2c10
|
|
** 1 0 0x2c20
|
|
** 1 1 0x2c30
|
|
*/
|
|
where = (pos[0] & 6) >> 1;
|
|
iobase = 0x2c00 + (0x10 * where);
|
|
|
|
/*
|
|
** Found the adapter we were looking for. Now start setting it up.
|
|
**
|
|
** First work on decoding the IRQ. It's stored in the lower 4 bits
|
|
** of pos1. Bits are as follows (from the ADF file):
|
|
**
|
|
** Bits
|
|
** 3 2 1 0 IRQ
|
|
** --------------------
|
|
** 0 0 1 0 5
|
|
** 0 0 0 1 9
|
|
** 0 1 0 0 10
|
|
** 1 0 0 0 11
|
|
*/
|
|
where = pos[1] & 0x0f;
|
|
switch (where) {
|
|
case 1:
|
|
irq = 9;
|
|
break;
|
|
case 2:
|
|
irq = 5;
|
|
break;
|
|
case 4:
|
|
irq = 10;
|
|
break;
|
|
case 8:
|
|
irq = 11;
|
|
break;
|
|
default:
|
|
printk("%s: mca_probe IRQ error. You should never get here (%d).\n", mdev->name, where);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
** Shared memory address of adapter is stored in bits 3-5 of pos0.
|
|
** They are mapped as follows:
|
|
**
|
|
** Bit
|
|
** 5 4 3 Memory Addresses
|
|
** 0 0 0 C0000-CFFFF (64K)
|
|
** 1 0 0 C8000-CFFFF (32K)
|
|
** 0 0 1 D0000-DFFFF (64K)
|
|
** 1 0 1 D8000-DFFFF (32K)
|
|
** 0 1 0 E0000-EFFFF (64K)
|
|
** 1 1 0 E8000-EFFFF (32K)
|
|
*/
|
|
where = (pos[0] & 0x18) >> 3;
|
|
mem_start = 0xc0000 + (where * 0x10000);
|
|
if (pos[0] & 0x20) {
|
|
mem_start += 0x8000;
|
|
}
|
|
|
|
/* claim the slot */
|
|
strncpy(mdev->name, depca_mca_adapter_name[mdev->index],
|
|
sizeof(mdev->name));
|
|
mca_device_set_claim(mdev, 1);
|
|
|
|
/*
|
|
** Get everything allocated and initialized... (almost just
|
|
** like the ISA and EISA probes)
|
|
*/
|
|
irq = mca_device_transform_irq(mdev, irq);
|
|
iobase = mca_device_transform_ioport(mdev, iobase);
|
|
|
|
if ((err = depca_common_init (iobase, &dev)))
|
|
goto out_unclaim;
|
|
|
|
dev->irq = irq;
|
|
dev->base_addr = iobase;
|
|
lp = dev->priv;
|
|
lp->depca_bus = DEPCA_BUS_MCA;
|
|
lp->adapter = depca_mca_adapter_type[mdev->index];
|
|
lp->mem_start = mem_start;
|
|
|
|
if ((err = depca_hw_init(dev, device)))
|
|
goto out_free;
|
|
|
|
return 0;
|
|
|
|
out_free:
|
|
free_netdev (dev);
|
|
release_region (iobase, DEPCA_TOTAL_SIZE);
|
|
out_unclaim:
|
|
mca_device_set_claim(mdev, 0);
|
|
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
** ISA bus I/O device probe
|
|
*/
|
|
|
|
static void __init depca_platform_probe (void)
|
|
{
|
|
int i;
|
|
struct platform_device *pldev;
|
|
|
|
for (i = 0; depca_io_ports[i].iobase; i++) {
|
|
depca_io_ports[i].device = NULL;
|
|
|
|
/* if an address has been specified on the command
|
|
* line, use it (if valid) */
|
|
if (io && io != depca_io_ports[i].iobase)
|
|
continue;
|
|
|
|
pldev = platform_device_alloc(depca_string, i);
|
|
if (!pldev)
|
|
continue;
|
|
|
|
pldev->dev.platform_data = (void *) depca_io_ports[i].iobase;
|
|
depca_io_ports[i].device = pldev;
|
|
|
|
if (platform_device_add(pldev)) {
|
|
depca_io_ports[i].device = NULL;
|
|
pldev->dev.platform_data = NULL;
|
|
platform_device_put(pldev);
|
|
continue;
|
|
}
|
|
|
|
if (!pldev->dev.driver) {
|
|
/* The driver was not bound to this device, there was
|
|
* no hardware at this address. Unregister it, as the
|
|
* release fuction will take care of freeing the
|
|
* allocated structure */
|
|
|
|
depca_io_ports[i].device = NULL;
|
|
pldev->dev.platform_data = NULL;
|
|
platform_device_unregister (pldev);
|
|
}
|
|
}
|
|
}
|
|
|
|
static enum depca_type __init depca_shmem_probe (ulong *mem_start)
|
|
{
|
|
u_long mem_base[] = DEPCA_RAM_BASE_ADDRESSES;
|
|
enum depca_type adapter = unknown;
|
|
int i;
|
|
|
|
for (i = 0; mem_base[i]; i++) {
|
|
*mem_start = mem ? mem : mem_base[i];
|
|
adapter = DepcaSignature (adapter_name, *mem_start);
|
|
if (adapter != unknown)
|
|
break;
|
|
}
|
|
|
|
return adapter;
|
|
}
|
|
|
|
static int __init depca_isa_probe (struct platform_device *device)
|
|
{
|
|
struct net_device *dev;
|
|
struct depca_private *lp;
|
|
u_long ioaddr, mem_start = 0;
|
|
enum depca_type adapter = unknown;
|
|
int status = 0;
|
|
|
|
ioaddr = (u_long) device->dev.platform_data;
|
|
|
|
if ((status = depca_common_init (ioaddr, &dev)))
|
|
goto out;
|
|
|
|
adapter = depca_shmem_probe (&mem_start);
|
|
|
|
if (adapter == unknown) {
|
|
status = -ENODEV;
|
|
goto out_free;
|
|
}
|
|
|
|
dev->base_addr = ioaddr;
|
|
dev->irq = irq; /* Use whatever value the user gave
|
|
* us, and 0 if he didn't. */
|
|
lp = dev->priv;
|
|
lp->depca_bus = DEPCA_BUS_ISA;
|
|
lp->adapter = adapter;
|
|
lp->mem_start = mem_start;
|
|
|
|
if ((status = depca_hw_init(dev, &device->dev)))
|
|
goto out_free;
|
|
|
|
return 0;
|
|
|
|
out_free:
|
|
free_netdev (dev);
|
|
release_region (ioaddr, DEPCA_TOTAL_SIZE);
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** EISA callbacks from sysfs.
|
|
*/
|
|
|
|
#ifdef CONFIG_EISA
|
|
static int __init depca_eisa_probe (struct device *device)
|
|
{
|
|
struct eisa_device *edev;
|
|
struct net_device *dev;
|
|
struct depca_private *lp;
|
|
u_long ioaddr, mem_start;
|
|
int status = 0;
|
|
|
|
edev = to_eisa_device (device);
|
|
ioaddr = edev->base_addr + DEPCA_EISA_IO_PORTS;
|
|
|
|
if ((status = depca_common_init (ioaddr, &dev)))
|
|
goto out;
|
|
|
|
/* It would have been nice to get card configuration from the
|
|
* card. Unfortunately, this register is write-only (shares
|
|
* it's address with the ethernet prom)... As we don't parse
|
|
* the EISA configuration structures (yet... :-), just rely on
|
|
* the ISA probing to sort it out... */
|
|
|
|
depca_shmem_probe (&mem_start);
|
|
|
|
dev->base_addr = ioaddr;
|
|
dev->irq = irq;
|
|
lp = dev->priv;
|
|
lp->depca_bus = DEPCA_BUS_EISA;
|
|
lp->adapter = edev->id.driver_data;
|
|
lp->mem_start = mem_start;
|
|
|
|
if ((status = depca_hw_init(dev, device)))
|
|
goto out_free;
|
|
|
|
return 0;
|
|
|
|
out_free:
|
|
free_netdev (dev);
|
|
release_region (ioaddr, DEPCA_TOTAL_SIZE);
|
|
out:
|
|
return status;
|
|
}
|
|
#endif
|
|
|
|
static int __devexit depca_device_remove (struct device *device)
|
|
{
|
|
struct net_device *dev;
|
|
struct depca_private *lp;
|
|
int bus;
|
|
|
|
dev = device->driver_data;
|
|
lp = dev->priv;
|
|
|
|
unregister_netdev (dev);
|
|
iounmap (lp->sh_mem);
|
|
release_mem_region (lp->mem_start, lp->mem_len);
|
|
release_region (dev->base_addr, DEPCA_TOTAL_SIZE);
|
|
bus = lp->depca_bus;
|
|
free_netdev (dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
** Look for a particular board name in the on-board Remote Diagnostics
|
|
** and Boot (readb) ROM. This will also give us a clue to the network RAM
|
|
** base address.
|
|
*/
|
|
static int __init DepcaSignature(char *name, u_long base_addr)
|
|
{
|
|
u_int i, j, k;
|
|
void __iomem *ptr;
|
|
char tmpstr[16];
|
|
u_long prom_addr = base_addr + 0xc000;
|
|
u_long mem_addr = base_addr + 0x8000; /* 32KB */
|
|
|
|
/* Can't reserve the prom region, it is already marked as
|
|
* used, at least on x86. Instead, reserve a memory region a
|
|
* board would certainly use. If it works, go ahead. If not,
|
|
* run like hell... */
|
|
|
|
if (!request_mem_region (mem_addr, 16, depca_string))
|
|
return unknown;
|
|
|
|
/* Copy the first 16 bytes of ROM */
|
|
|
|
ptr = ioremap(prom_addr, 16);
|
|
if (ptr == NULL) {
|
|
printk(KERN_ERR "depca: I/O remap failed at %lx\n", prom_addr);
|
|
return unknown;
|
|
}
|
|
for (i = 0; i < 16; i++) {
|
|
tmpstr[i] = readb(ptr + i);
|
|
}
|
|
iounmap(ptr);
|
|
|
|
release_mem_region (mem_addr, 16);
|
|
|
|
/* Check if PROM contains a valid string */
|
|
for (i = 0; *depca_signature[i] != '\0'; i++) {
|
|
for (j = 0, k = 0; j < 16 && k < strlen(depca_signature[i]); j++) {
|
|
if (depca_signature[i][k] == tmpstr[j]) { /* track signature */
|
|
k++;
|
|
} else { /* lost signature; begin search again */
|
|
k = 0;
|
|
}
|
|
}
|
|
if (k == strlen(depca_signature[i]))
|
|
break;
|
|
}
|
|
|
|
/* Check if name string is valid, provided there's no PROM */
|
|
if (name && *name && (i == unknown)) {
|
|
for (i = 0; *depca_signature[i] != '\0'; i++) {
|
|
if (strcmp(name, depca_signature[i]) == 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
/*
|
|
** Look for a special sequence in the Ethernet station address PROM that
|
|
** is common across all DEPCA products. Note that the original DEPCA needs
|
|
** its ROM address counter to be initialized and enabled. Only enable
|
|
** if the first address octet is a 0x08 - this minimises the chances of
|
|
** messing around with some other hardware, but it assumes that this DEPCA
|
|
** card initialized itself correctly.
|
|
**
|
|
** Search the Ethernet address ROM for the signature. Since the ROM address
|
|
** counter can start at an arbitrary point, the search must include the entire
|
|
** probe sequence length plus the (length_of_the_signature - 1).
|
|
** Stop the search IMMEDIATELY after the signature is found so that the
|
|
** PROM address counter is correctly positioned at the start of the
|
|
** ethernet address for later read out.
|
|
*/
|
|
static int __init DevicePresent(u_long ioaddr)
|
|
{
|
|
union {
|
|
struct {
|
|
u32 a;
|
|
u32 b;
|
|
} llsig;
|
|
char Sig[sizeof(u32) << 1];
|
|
}
|
|
dev;
|
|
short sigLength = 0;
|
|
s8 data;
|
|
s16 nicsr;
|
|
int i, j, status = 0;
|
|
|
|
data = inb(DEPCA_PROM); /* clear counter on DEPCA */
|
|
data = inb(DEPCA_PROM); /* read data */
|
|
|
|
if (data == 0x08) { /* Enable counter on DEPCA */
|
|
nicsr = inb(DEPCA_NICSR);
|
|
nicsr |= AAC;
|
|
outb(nicsr, DEPCA_NICSR);
|
|
}
|
|
|
|
dev.llsig.a = ETH_PROM_SIG;
|
|
dev.llsig.b = ETH_PROM_SIG;
|
|
sigLength = sizeof(u32) << 1;
|
|
|
|
for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) {
|
|
data = inb(DEPCA_PROM);
|
|
if (dev.Sig[j] == data) { /* track signature */
|
|
j++;
|
|
} else { /* lost signature; begin search again */
|
|
if (data == dev.Sig[0]) { /* rare case.... */
|
|
j = 1;
|
|
} else {
|
|
j = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (j != sigLength) {
|
|
status = -ENODEV; /* search failed */
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** The DE100 and DE101 PROM accesses were made non-standard for some bizarre
|
|
** reason: access the upper half of the PROM with x=0; access the lower half
|
|
** with x=1.
|
|
*/
|
|
static int __init get_hw_addr(struct net_device *dev)
|
|
{
|
|
u_long ioaddr = dev->base_addr;
|
|
struct depca_private *lp = dev->priv;
|
|
int i, k, tmp, status = 0;
|
|
u_short j, x, chksum;
|
|
|
|
x = (((lp->adapter == de100) || (lp->adapter == de101)) ? 1 : 0);
|
|
|
|
for (i = 0, k = 0, j = 0; j < 3; j++) {
|
|
k <<= 1;
|
|
if (k > 0xffff)
|
|
k -= 0xffff;
|
|
|
|
k += (u_char) (tmp = inb(DEPCA_PROM + x));
|
|
dev->dev_addr[i++] = (u_char) tmp;
|
|
k += (u_short) ((tmp = inb(DEPCA_PROM + x)) << 8);
|
|
dev->dev_addr[i++] = (u_char) tmp;
|
|
|
|
if (k > 0xffff)
|
|
k -= 0xffff;
|
|
}
|
|
if (k == 0xffff)
|
|
k = 0;
|
|
|
|
chksum = (u_char) inb(DEPCA_PROM + x);
|
|
chksum |= (u_short) (inb(DEPCA_PROM + x) << 8);
|
|
if (k != chksum)
|
|
status = -1;
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** Load a packet into the shared memory
|
|
*/
|
|
static int load_packet(struct net_device *dev, struct sk_buff *skb)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
int i, entry, end, len, status = 0;
|
|
|
|
entry = lp->tx_new; /* Ring around buffer number. */
|
|
end = (entry + (skb->len - 1) / TX_BUFF_SZ) & lp->txRingMask;
|
|
if (!(readl(&lp->tx_ring[end].base) & T_OWN)) { /* Enough room? */
|
|
/*
|
|
** Caution: the write order is important here... don't set up the
|
|
** ownership rights until all the other information is in place.
|
|
*/
|
|
if (end < entry) { /* wrapped buffer */
|
|
len = (lp->txRingMask - entry + 1) * TX_BUFF_SZ;
|
|
memcpy_toio(lp->tx_buff[entry], skb->data, len);
|
|
memcpy_toio(lp->tx_buff[0], skb->data + len, skb->len - len);
|
|
} else { /* linear buffer */
|
|
memcpy_toio(lp->tx_buff[entry], skb->data, skb->len);
|
|
}
|
|
|
|
/* set up the buffer descriptors */
|
|
len = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len;
|
|
for (i = entry; i != end; i = (i+1) & lp->txRingMask) {
|
|
/* clean out flags */
|
|
writel(readl(&lp->tx_ring[i].base) & ~T_FLAGS, &lp->tx_ring[i].base);
|
|
writew(0x0000, &lp->tx_ring[i].misc); /* clears other error flags */
|
|
writew(-TX_BUFF_SZ, &lp->tx_ring[i].length); /* packet length in buffer */
|
|
len -= TX_BUFF_SZ;
|
|
}
|
|
/* clean out flags */
|
|
writel(readl(&lp->tx_ring[end].base) & ~T_FLAGS, &lp->tx_ring[end].base);
|
|
writew(0x0000, &lp->tx_ring[end].misc); /* clears other error flags */
|
|
writew(-len, &lp->tx_ring[end].length); /* packet length in last buff */
|
|
|
|
/* start of packet */
|
|
writel(readl(&lp->tx_ring[entry].base) | T_STP, &lp->tx_ring[entry].base);
|
|
/* end of packet */
|
|
writel(readl(&lp->tx_ring[end].base) | T_ENP, &lp->tx_ring[end].base);
|
|
|
|
for (i = end; i != entry; --i) {
|
|
/* ownership of packet */
|
|
writel(readl(&lp->tx_ring[i].base) | T_OWN, &lp->tx_ring[i].base);
|
|
if (i == 0)
|
|
i = lp->txRingMask + 1;
|
|
}
|
|
writel(readl(&lp->tx_ring[entry].base) | T_OWN, &lp->tx_ring[entry].base);
|
|
|
|
lp->tx_new = (++end) & lp->txRingMask; /* update current pointers */
|
|
} else {
|
|
status = -1;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static void depca_dbg_open(struct net_device *dev)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
u_long ioaddr = dev->base_addr;
|
|
struct depca_init *p = &lp->init_block;
|
|
int i;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
if (depca_debug > 1) {
|
|
/* Do not copy the shadow init block into shared memory */
|
|
/* Debugging should not affect normal operation! */
|
|
/* The shadow init block will get copied across during InitRestartDepca */
|
|
printk("%s: depca open with irq %d\n", dev->name, dev->irq);
|
|
printk("Descriptor head addresses (CPU):\n");
|
|
printk(" 0x%lx 0x%lx\n", (u_long) lp->rx_ring, (u_long) lp->tx_ring);
|
|
printk("Descriptor addresses (CPU):\nRX: ");
|
|
for (i = 0; i < lp->rxRingMask; i++) {
|
|
if (i < 3) {
|
|
printk("%p ", &lp->rx_ring[i].base);
|
|
}
|
|
}
|
|
printk("...%p\n", &lp->rx_ring[i].base);
|
|
printk("TX: ");
|
|
for (i = 0; i < lp->txRingMask; i++) {
|
|
if (i < 3) {
|
|
printk("%p ", &lp->tx_ring[i].base);
|
|
}
|
|
}
|
|
printk("...%p\n", &lp->tx_ring[i].base);
|
|
printk("\nDescriptor buffers (Device):\nRX: ");
|
|
for (i = 0; i < lp->rxRingMask; i++) {
|
|
if (i < 3) {
|
|
printk("0x%8.8x ", readl(&lp->rx_ring[i].base));
|
|
}
|
|
}
|
|
printk("...0x%8.8x\n", readl(&lp->rx_ring[i].base));
|
|
printk("TX: ");
|
|
for (i = 0; i < lp->txRingMask; i++) {
|
|
if (i < 3) {
|
|
printk("0x%8.8x ", readl(&lp->tx_ring[i].base));
|
|
}
|
|
}
|
|
printk("...0x%8.8x\n", readl(&lp->tx_ring[i].base));
|
|
printk("Initialisation block at 0x%8.8lx(Phys)\n", lp->mem_start);
|
|
printk(" mode: 0x%4.4x\n", p->mode);
|
|
printk(" physical address: %s\n", print_mac(mac, p->phys_addr));
|
|
printk(" multicast hash table: ");
|
|
for (i = 0; i < (HASH_TABLE_LEN >> 3) - 1; i++) {
|
|
printk("%2.2x:", p->mcast_table[i]);
|
|
}
|
|
printk("%2.2x\n", p->mcast_table[i]);
|
|
printk(" rx_ring at: 0x%8.8x\n", p->rx_ring);
|
|
printk(" tx_ring at: 0x%8.8x\n", p->tx_ring);
|
|
printk("buffers (Phys): 0x%8.8lx\n", lp->mem_start + lp->buffs_offset);
|
|
printk("Ring size:\nRX: %d Log2(rxRingMask): 0x%8.8x\n", (int) lp->rxRingMask + 1, lp->rx_rlen);
|
|
printk("TX: %d Log2(txRingMask): 0x%8.8x\n", (int) lp->txRingMask + 1, lp->tx_rlen);
|
|
outw(CSR2, DEPCA_ADDR);
|
|
printk("CSR2&1: 0x%4.4x", inw(DEPCA_DATA));
|
|
outw(CSR1, DEPCA_ADDR);
|
|
printk("%4.4x\n", inw(DEPCA_DATA));
|
|
outw(CSR3, DEPCA_ADDR);
|
|
printk("CSR3: 0x%4.4x\n", inw(DEPCA_DATA));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Perform IOCTL call functions here. Some are privileged operations and the
|
|
** effective uid is checked in those cases.
|
|
** All multicast IOCTLs will not work here and are for testing purposes only.
|
|
*/
|
|
static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct depca_private *lp = (struct depca_private *) dev->priv;
|
|
struct depca_ioctl *ioc = (struct depca_ioctl *) &rq->ifr_ifru;
|
|
int i, status = 0;
|
|
u_long ioaddr = dev->base_addr;
|
|
union {
|
|
u8 addr[(HASH_TABLE_LEN * ETH_ALEN)];
|
|
u16 sval[(HASH_TABLE_LEN * ETH_ALEN) >> 1];
|
|
u32 lval[(HASH_TABLE_LEN * ETH_ALEN) >> 2];
|
|
} tmp;
|
|
unsigned long flags;
|
|
void *buf;
|
|
|
|
switch (ioc->cmd) {
|
|
case DEPCA_GET_HWADDR: /* Get the hardware address */
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
tmp.addr[i] = dev->dev_addr[i];
|
|
}
|
|
ioc->len = ETH_ALEN;
|
|
if (copy_to_user(ioc->data, tmp.addr, ioc->len))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case DEPCA_SET_HWADDR: /* Set the hardware address */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN))
|
|
return -EFAULT;
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
dev->dev_addr[i] = tmp.addr[i];
|
|
}
|
|
netif_stop_queue(dev);
|
|
while (lp->tx_old != lp->tx_new)
|
|
cpu_relax(); /* Wait for the ring to empty */
|
|
|
|
STOP_DEPCA; /* Temporarily stop the depca. */
|
|
depca_init_ring(dev); /* Initialize the descriptor rings */
|
|
LoadCSRs(dev); /* Reload CSR3 */
|
|
InitRestartDepca(dev); /* Resume normal operation. */
|
|
netif_start_queue(dev); /* Unlock the TX ring */
|
|
break;
|
|
|
|
case DEPCA_SET_PROM: /* Set Promiscuous Mode */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
netif_stop_queue(dev);
|
|
while (lp->tx_old != lp->tx_new)
|
|
cpu_relax(); /* Wait for the ring to empty */
|
|
|
|
STOP_DEPCA; /* Temporarily stop the depca. */
|
|
depca_init_ring(dev); /* Initialize the descriptor rings */
|
|
lp->init_block.mode |= PROM; /* Set promiscuous mode */
|
|
|
|
LoadCSRs(dev); /* Reload CSR3 */
|
|
InitRestartDepca(dev); /* Resume normal operation. */
|
|
netif_start_queue(dev); /* Unlock the TX ring */
|
|
break;
|
|
|
|
case DEPCA_CLR_PROM: /* Clear Promiscuous Mode */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
netif_stop_queue(dev);
|
|
while (lp->tx_old != lp->tx_new)
|
|
cpu_relax(); /* Wait for the ring to empty */
|
|
|
|
STOP_DEPCA; /* Temporarily stop the depca. */
|
|
depca_init_ring(dev); /* Initialize the descriptor rings */
|
|
lp->init_block.mode &= ~PROM; /* Clear promiscuous mode */
|
|
|
|
LoadCSRs(dev); /* Reload CSR3 */
|
|
InitRestartDepca(dev); /* Resume normal operation. */
|
|
netif_start_queue(dev); /* Unlock the TX ring */
|
|
break;
|
|
|
|
case DEPCA_SAY_BOO: /* Say "Boo!" to the kernel log file */
|
|
if(!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
printk("%s: Boo!\n", dev->name);
|
|
break;
|
|
|
|
case DEPCA_GET_MCA: /* Get the multicast address table */
|
|
ioc->len = (HASH_TABLE_LEN >> 3);
|
|
if (copy_to_user(ioc->data, lp->init_block.mcast_table, ioc->len))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case DEPCA_SET_MCA: /* Set a multicast address */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
if (ioc->len >= HASH_TABLE_LEN)
|
|
return -EINVAL;
|
|
if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN * ioc->len))
|
|
return -EFAULT;
|
|
set_multicast_list(dev);
|
|
break;
|
|
|
|
case DEPCA_CLR_MCA: /* Clear all multicast addresses */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
set_multicast_list(dev);
|
|
break;
|
|
|
|
case DEPCA_MCA_EN: /* Enable pass all multicast addressing */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
set_multicast_list(dev);
|
|
break;
|
|
|
|
case DEPCA_GET_STATS: /* Get the driver statistics */
|
|
ioc->len = sizeof(lp->pktStats);
|
|
buf = kmalloc(ioc->len, GFP_KERNEL);
|
|
if(!buf)
|
|
return -ENOMEM;
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
memcpy(buf, &lp->pktStats, ioc->len);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
if (copy_to_user(ioc->data, buf, ioc->len))
|
|
status = -EFAULT;
|
|
kfree(buf);
|
|
break;
|
|
|
|
case DEPCA_CLR_STATS: /* Zero out the driver statistics */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
memset(&lp->pktStats, 0, sizeof(lp->pktStats));
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
break;
|
|
|
|
case DEPCA_GET_REG: /* Get the DEPCA Registers */
|
|
i = 0;
|
|
tmp.sval[i++] = inw(DEPCA_NICSR);
|
|
outw(CSR0, DEPCA_ADDR); /* status register */
|
|
tmp.sval[i++] = inw(DEPCA_DATA);
|
|
memcpy(&tmp.sval[i], &lp->init_block, sizeof(struct depca_init));
|
|
ioc->len = i + sizeof(struct depca_init);
|
|
if (copy_to_user(ioc->data, tmp.addr, ioc->len))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static int __init depca_module_init (void)
|
|
{
|
|
int err = 0;
|
|
|
|
#ifdef CONFIG_MCA
|
|
err = mca_register_driver (&depca_mca_driver);
|
|
#endif
|
|
#ifdef CONFIG_EISA
|
|
err |= eisa_driver_register (&depca_eisa_driver);
|
|
#endif
|
|
err |= platform_driver_register (&depca_isa_driver);
|
|
depca_platform_probe ();
|
|
|
|
return err;
|
|
}
|
|
|
|
static void __exit depca_module_exit (void)
|
|
{
|
|
int i;
|
|
#ifdef CONFIG_MCA
|
|
mca_unregister_driver (&depca_mca_driver);
|
|
#endif
|
|
#ifdef CONFIG_EISA
|
|
eisa_driver_unregister (&depca_eisa_driver);
|
|
#endif
|
|
platform_driver_unregister (&depca_isa_driver);
|
|
|
|
for (i = 0; depca_io_ports[i].iobase; i++) {
|
|
if (depca_io_ports[i].device) {
|
|
depca_io_ports[i].device->dev.platform_data = NULL;
|
|
platform_device_unregister (depca_io_ports[i].device);
|
|
depca_io_ports[i].device = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
module_init (depca_module_init);
|
|
module_exit (depca_module_exit);
|