linux-stable/arch/arm/mach-mmp/time.c
Lubomir Rintel a9372a5fb2 ARM: mmp: add support for MMP3 SoC
Similar to MMP2, which this patch is based on. Known differencies from MMP2
are:

* Two PJ4B cores instead of one PJ4
* Tauros 3 L2 cache controller instead of Tauros 2
* A GIC interrupt controller optionally used instead of the MMP one
* A TWD local timer
* Different USB2 PHY
* A USB3 SS controller
* More interrupt muxes

Hard to tell what else is different, because documentation is not
available.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-17 16:36:11 +02:00

229 lines
5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-mmp/time.c
*
* Support for clocksource and clockevents
*
* Copyright (C) 2008 Marvell International Ltd.
* All rights reserved.
*
* 2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
* 2008-10-08: Bin Yang <bin.yang@marvell.com>
*
* The timers module actually includes three timers, each timer with up to
* three match comparators. Timer #0 is used here in free-running mode as
* the clock source, and match comparator #1 used as clock event device.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
#include <asm/mach/time.h>
#include "addr-map.h"
#include "regs-timers.h"
#include "regs-apbc.h"
#include "irqs.h"
#include "cputype.h"
#include "clock.h"
#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
#define MAX_DELTA (0xfffffffe)
#define MIN_DELTA (16)
static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
/*
* FIXME: the timer needs some delay to stablize the counter capture
*/
static inline uint32_t timer_read(void)
{
int delay = 100;
__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
while (delay--)
cpu_relax();
return __raw_readl(mmp_timer_base + TMR_CVWR(1));
}
static u64 notrace mmp_read_sched_clock(void)
{
return timer_read();
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *c = dev_id;
/*
* Clear pending interrupt status.
*/
__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
/*
* Disable timer 0.
*/
__raw_writel(0x02, mmp_timer_base + TMR_CER);
c->event_handler(c);
return IRQ_HANDLED;
}
static int timer_set_next_event(unsigned long delta,
struct clock_event_device *dev)
{
unsigned long flags;
local_irq_save(flags);
/*
* Disable timer 0.
*/
__raw_writel(0x02, mmp_timer_base + TMR_CER);
/*
* Clear and enable timer match 0 interrupt.
*/
__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
__raw_writel(0x01, mmp_timer_base + TMR_IER(0));
/*
* Setup new clockevent timer value.
*/
__raw_writel(delta - 1, mmp_timer_base + TMR_TN_MM(0, 0));
/*
* Enable timer 0.
*/
__raw_writel(0x03, mmp_timer_base + TMR_CER);
local_irq_restore(flags);
return 0;
}
static int timer_set_shutdown(struct clock_event_device *evt)
{
unsigned long flags;
local_irq_save(flags);
/* disable the matching interrupt */
__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
local_irq_restore(flags);
return 0;
}
static struct clock_event_device ckevt = {
.name = "clockevent",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
.set_next_event = timer_set_next_event,
.set_state_shutdown = timer_set_shutdown,
.set_state_oneshot = timer_set_shutdown,
};
static u64 clksrc_read(struct clocksource *cs)
{
return timer_read();
}
static struct clocksource cksrc = {
.name = "clocksource",
.rating = 200,
.read = clksrc_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void __init timer_config(void)
{
uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR);
__raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
ccr &= (cpu_is_mmp2() || cpu_is_mmp3()) ?
(TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
__raw_writel(ccr, mmp_timer_base + TMR_CCR);
/* set timer 0 to periodic mode, and timer 1 to free-running mode */
__raw_writel(0x2, mmp_timer_base + TMR_CMR);
__raw_writel(0x1, mmp_timer_base + TMR_PLCR(0)); /* periodic */
__raw_writel(0x7, mmp_timer_base + TMR_ICR(0)); /* clear status */
__raw_writel(0x0, mmp_timer_base + TMR_IER(0));
__raw_writel(0x0, mmp_timer_base + TMR_PLCR(1)); /* free-running */
__raw_writel(0x7, mmp_timer_base + TMR_ICR(1)); /* clear status */
__raw_writel(0x0, mmp_timer_base + TMR_IER(1));
/* enable timer 1 counter */
__raw_writel(0x2, mmp_timer_base + TMR_CER);
}
static struct irqaction timer_irq = {
.name = "timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = timer_interrupt,
.dev_id = &ckevt,
};
void __init mmp_timer_init(int irq, unsigned long rate)
{
timer_config();
sched_clock_register(mmp_read_sched_clock, 32, rate);
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
clocksource_register_hz(&cksrc, rate);
clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
}
static int __init mmp_dt_init_timer(struct device_node *np)
{
struct clk *clk;
int irq, ret;
unsigned long rate;
clk = of_clk_get(np, 0);
if (!IS_ERR(clk)) {
ret = clk_prepare_enable(clk);
if (ret)
return ret;
rate = clk_get_rate(clk) / 2;
} else if (cpu_is_pj4()) {
rate = 6500000;
} else {
rate = 3250000;
}
irq = irq_of_parse_and_map(np, 0);
if (!irq)
return -EINVAL;
mmp_timer_base = of_iomap(np, 0);
if (!mmp_timer_base)
return -ENOMEM;
mmp_timer_init(irq, rate);
return 0;
}
TIMER_OF_DECLARE(mmp_timer, "mrvl,mmp-timer", mmp_dt_init_timer);