mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
![Ville Syrjälä](/assets/img/avatar_default.png)
Just set pipe_mask=~0 for the non-special cases where any pipe will do. intel_encoder_possible_crtcs() will anyway drop out anything that doesn't exist. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-5-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
1968 lines
59 KiB
C
1968 lines
59 KiB
C
/*
|
|
* Copyright © 2013 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* Author: Jani Nikula <jani.nikula@intel.com>
|
|
*/
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
|
|
#include "i915_drv.h"
|
|
#include "intel_atomic.h"
|
|
#include "intel_connector.h"
|
|
#include "intel_display_types.h"
|
|
#include "intel_dsi.h"
|
|
#include "intel_fifo_underrun.h"
|
|
#include "intel_panel.h"
|
|
#include "intel_sideband.h"
|
|
|
|
/* return pixels in terms of txbyteclkhs */
|
|
static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
|
|
u16 burst_mode_ratio)
|
|
{
|
|
return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
|
|
8 * 100), lane_count);
|
|
}
|
|
|
|
/* return pixels equvalent to txbyteclkhs */
|
|
static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count,
|
|
u16 burst_mode_ratio)
|
|
{
|
|
return DIV_ROUND_UP((clk_hs * lane_count * 8 * 100),
|
|
(bpp * burst_mode_ratio));
|
|
}
|
|
|
|
enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt)
|
|
{
|
|
/* It just so happens the VBT matches register contents. */
|
|
switch (fmt) {
|
|
case VID_MODE_FORMAT_RGB888:
|
|
return MIPI_DSI_FMT_RGB888;
|
|
case VID_MODE_FORMAT_RGB666:
|
|
return MIPI_DSI_FMT_RGB666;
|
|
case VID_MODE_FORMAT_RGB666_PACKED:
|
|
return MIPI_DSI_FMT_RGB666_PACKED;
|
|
case VID_MODE_FORMAT_RGB565:
|
|
return MIPI_DSI_FMT_RGB565;
|
|
default:
|
|
MISSING_CASE(fmt);
|
|
return MIPI_DSI_FMT_RGB666;
|
|
}
|
|
}
|
|
|
|
void vlv_dsi_wait_for_fifo_empty(struct intel_dsi *intel_dsi, enum port port)
|
|
{
|
|
struct drm_encoder *encoder = &intel_dsi->base.base;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
u32 mask;
|
|
|
|
mask = LP_CTRL_FIFO_EMPTY | HS_CTRL_FIFO_EMPTY |
|
|
LP_DATA_FIFO_EMPTY | HS_DATA_FIFO_EMPTY;
|
|
|
|
if (intel_de_wait_for_set(dev_priv, MIPI_GEN_FIFO_STAT(port),
|
|
mask, 100))
|
|
DRM_ERROR("DPI FIFOs are not empty\n");
|
|
}
|
|
|
|
static void write_data(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg,
|
|
const u8 *data, u32 len)
|
|
{
|
|
u32 i, j;
|
|
|
|
for (i = 0; i < len; i += 4) {
|
|
u32 val = 0;
|
|
|
|
for (j = 0; j < min_t(u32, len - i, 4); j++)
|
|
val |= *data++ << 8 * j;
|
|
|
|
I915_WRITE(reg, val);
|
|
}
|
|
}
|
|
|
|
static void read_data(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg,
|
|
u8 *data, u32 len)
|
|
{
|
|
u32 i, j;
|
|
|
|
for (i = 0; i < len; i += 4) {
|
|
u32 val = I915_READ(reg);
|
|
|
|
for (j = 0; j < min_t(u32, len - i, 4); j++)
|
|
*data++ = val >> 8 * j;
|
|
}
|
|
}
|
|
|
|
static ssize_t intel_dsi_host_transfer(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
struct intel_dsi_host *intel_dsi_host = to_intel_dsi_host(host);
|
|
struct drm_device *dev = intel_dsi_host->intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum port port = intel_dsi_host->port;
|
|
struct mipi_dsi_packet packet;
|
|
ssize_t ret;
|
|
const u8 *header, *data;
|
|
i915_reg_t data_reg, ctrl_reg;
|
|
u32 data_mask, ctrl_mask;
|
|
|
|
ret = mipi_dsi_create_packet(&packet, msg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
header = packet.header;
|
|
data = packet.payload;
|
|
|
|
if (msg->flags & MIPI_DSI_MSG_USE_LPM) {
|
|
data_reg = MIPI_LP_GEN_DATA(port);
|
|
data_mask = LP_DATA_FIFO_FULL;
|
|
ctrl_reg = MIPI_LP_GEN_CTRL(port);
|
|
ctrl_mask = LP_CTRL_FIFO_FULL;
|
|
} else {
|
|
data_reg = MIPI_HS_GEN_DATA(port);
|
|
data_mask = HS_DATA_FIFO_FULL;
|
|
ctrl_reg = MIPI_HS_GEN_CTRL(port);
|
|
ctrl_mask = HS_CTRL_FIFO_FULL;
|
|
}
|
|
|
|
/* note: this is never true for reads */
|
|
if (packet.payload_length) {
|
|
if (intel_de_wait_for_clear(dev_priv, MIPI_GEN_FIFO_STAT(port),
|
|
data_mask, 50))
|
|
DRM_ERROR("Timeout waiting for HS/LP DATA FIFO !full\n");
|
|
|
|
write_data(dev_priv, data_reg, packet.payload,
|
|
packet.payload_length);
|
|
}
|
|
|
|
if (msg->rx_len) {
|
|
I915_WRITE(MIPI_INTR_STAT(port), GEN_READ_DATA_AVAIL);
|
|
}
|
|
|
|
if (intel_de_wait_for_clear(dev_priv, MIPI_GEN_FIFO_STAT(port),
|
|
ctrl_mask, 50)) {
|
|
DRM_ERROR("Timeout waiting for HS/LP CTRL FIFO !full\n");
|
|
}
|
|
|
|
I915_WRITE(ctrl_reg, header[2] << 16 | header[1] << 8 | header[0]);
|
|
|
|
/* ->rx_len is set only for reads */
|
|
if (msg->rx_len) {
|
|
data_mask = GEN_READ_DATA_AVAIL;
|
|
if (intel_de_wait_for_set(dev_priv, MIPI_INTR_STAT(port),
|
|
data_mask, 50))
|
|
DRM_ERROR("Timeout waiting for read data.\n");
|
|
|
|
read_data(dev_priv, data_reg, msg->rx_buf, msg->rx_len);
|
|
}
|
|
|
|
/* XXX: fix for reads and writes */
|
|
return 4 + packet.payload_length;
|
|
}
|
|
|
|
static int intel_dsi_host_attach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *dsi)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int intel_dsi_host_detach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *dsi)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct mipi_dsi_host_ops intel_dsi_host_ops = {
|
|
.attach = intel_dsi_host_attach,
|
|
.detach = intel_dsi_host_detach,
|
|
.transfer = intel_dsi_host_transfer,
|
|
};
|
|
|
|
/*
|
|
* send a video mode command
|
|
*
|
|
* XXX: commands with data in MIPI_DPI_DATA?
|
|
*/
|
|
static int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs,
|
|
enum port port)
|
|
{
|
|
struct drm_encoder *encoder = &intel_dsi->base.base;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
u32 mask;
|
|
|
|
/* XXX: pipe, hs */
|
|
if (hs)
|
|
cmd &= ~DPI_LP_MODE;
|
|
else
|
|
cmd |= DPI_LP_MODE;
|
|
|
|
/* clear bit */
|
|
I915_WRITE(MIPI_INTR_STAT(port), SPL_PKT_SENT_INTERRUPT);
|
|
|
|
/* XXX: old code skips write if control unchanged */
|
|
if (cmd == I915_READ(MIPI_DPI_CONTROL(port)))
|
|
DRM_DEBUG_KMS("Same special packet %02x twice in a row.\n", cmd);
|
|
|
|
I915_WRITE(MIPI_DPI_CONTROL(port), cmd);
|
|
|
|
mask = SPL_PKT_SENT_INTERRUPT;
|
|
if (intel_de_wait_for_set(dev_priv, MIPI_INTR_STAT(port), mask, 100))
|
|
DRM_ERROR("Video mode command 0x%08x send failed.\n", cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void band_gap_reset(struct drm_i915_private *dev_priv)
|
|
{
|
|
vlv_flisdsi_get(dev_priv);
|
|
|
|
vlv_flisdsi_write(dev_priv, 0x08, 0x0001);
|
|
vlv_flisdsi_write(dev_priv, 0x0F, 0x0005);
|
|
vlv_flisdsi_write(dev_priv, 0x0F, 0x0025);
|
|
udelay(150);
|
|
vlv_flisdsi_write(dev_priv, 0x0F, 0x0000);
|
|
vlv_flisdsi_write(dev_priv, 0x08, 0x0000);
|
|
|
|
vlv_flisdsi_put(dev_priv);
|
|
}
|
|
|
|
static int intel_dsi_compute_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config,
|
|
struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
|
|
base);
|
|
struct intel_connector *intel_connector = intel_dsi->attached_connector;
|
|
struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
|
|
const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
|
|
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
|
|
int ret;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
|
|
|
|
if (fixed_mode) {
|
|
intel_fixed_panel_mode(fixed_mode, adjusted_mode);
|
|
|
|
if (HAS_GMCH(dev_priv))
|
|
intel_gmch_panel_fitting(crtc, pipe_config,
|
|
conn_state->scaling_mode);
|
|
else
|
|
intel_pch_panel_fitting(crtc, pipe_config,
|
|
conn_state->scaling_mode);
|
|
}
|
|
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
|
|
return -EINVAL;
|
|
|
|
/* DSI uses short packets for sync events, so clear mode flags for DSI */
|
|
adjusted_mode->flags = 0;
|
|
|
|
if (intel_dsi->pixel_format == MIPI_DSI_FMT_RGB888)
|
|
pipe_config->pipe_bpp = 24;
|
|
else
|
|
pipe_config->pipe_bpp = 18;
|
|
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
/* Enable Frame time stamp based scanline reporting */
|
|
adjusted_mode->private_flags |=
|
|
I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP;
|
|
|
|
/* Dual link goes to DSI transcoder A. */
|
|
if (intel_dsi->ports == BIT(PORT_C))
|
|
pipe_config->cpu_transcoder = TRANSCODER_DSI_C;
|
|
else
|
|
pipe_config->cpu_transcoder = TRANSCODER_DSI_A;
|
|
|
|
ret = bxt_dsi_pll_compute(encoder, pipe_config);
|
|
if (ret)
|
|
return -EINVAL;
|
|
} else {
|
|
ret = vlv_dsi_pll_compute(encoder, pipe_config);
|
|
if (ret)
|
|
return -EINVAL;
|
|
}
|
|
|
|
pipe_config->clock_set = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool glk_dsi_enable_io(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
u32 tmp;
|
|
bool cold_boot = false;
|
|
|
|
/* Set the MIPI mode
|
|
* If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting.
|
|
* Power ON MIPI IO first and then write into IO reset and LP wake bits
|
|
*/
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
tmp = I915_READ(MIPI_CTRL(port));
|
|
I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE);
|
|
}
|
|
|
|
/* Put the IO into reset */
|
|
tmp = I915_READ(MIPI_CTRL(PORT_A));
|
|
tmp &= ~GLK_MIPIIO_RESET_RELEASED;
|
|
I915_WRITE(MIPI_CTRL(PORT_A), tmp);
|
|
|
|
/* Program LP Wake */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
tmp = I915_READ(MIPI_CTRL(port));
|
|
if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY))
|
|
tmp &= ~GLK_LP_WAKE;
|
|
else
|
|
tmp |= GLK_LP_WAKE;
|
|
I915_WRITE(MIPI_CTRL(port), tmp);
|
|
}
|
|
|
|
/* Wait for Pwr ACK */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
|
|
GLK_MIPIIO_PORT_POWERED, 20))
|
|
DRM_ERROR("MIPIO port is powergated\n");
|
|
}
|
|
|
|
/* Check for cold boot scenario */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
cold_boot |=
|
|
!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY);
|
|
}
|
|
|
|
return cold_boot;
|
|
}
|
|
|
|
static void glk_dsi_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
u32 val;
|
|
|
|
/* Wait for MIPI PHY status bit to set */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
|
|
GLK_PHY_STATUS_PORT_READY, 20))
|
|
DRM_ERROR("PHY is not ON\n");
|
|
}
|
|
|
|
/* Get IO out of reset */
|
|
val = I915_READ(MIPI_CTRL(PORT_A));
|
|
I915_WRITE(MIPI_CTRL(PORT_A), val | GLK_MIPIIO_RESET_RELEASED);
|
|
|
|
/* Get IO out of Low power state*/
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) {
|
|
val = I915_READ(MIPI_DEVICE_READY(port));
|
|
val &= ~ULPS_STATE_MASK;
|
|
val |= DEVICE_READY;
|
|
I915_WRITE(MIPI_DEVICE_READY(port), val);
|
|
usleep_range(10, 15);
|
|
} else {
|
|
/* Enter ULPS */
|
|
val = I915_READ(MIPI_DEVICE_READY(port));
|
|
val &= ~ULPS_STATE_MASK;
|
|
val |= (ULPS_STATE_ENTER | DEVICE_READY);
|
|
I915_WRITE(MIPI_DEVICE_READY(port), val);
|
|
|
|
/* Wait for ULPS active */
|
|
if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
|
|
GLK_ULPS_NOT_ACTIVE, 20))
|
|
DRM_ERROR("ULPS not active\n");
|
|
|
|
/* Exit ULPS */
|
|
val = I915_READ(MIPI_DEVICE_READY(port));
|
|
val &= ~ULPS_STATE_MASK;
|
|
val |= (ULPS_STATE_EXIT | DEVICE_READY);
|
|
I915_WRITE(MIPI_DEVICE_READY(port), val);
|
|
|
|
/* Enter Normal Mode */
|
|
val = I915_READ(MIPI_DEVICE_READY(port));
|
|
val &= ~ULPS_STATE_MASK;
|
|
val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
|
|
I915_WRITE(MIPI_DEVICE_READY(port), val);
|
|
|
|
val = I915_READ(MIPI_CTRL(port));
|
|
val &= ~GLK_LP_WAKE;
|
|
I915_WRITE(MIPI_CTRL(port), val);
|
|
}
|
|
}
|
|
|
|
/* Wait for Stop state */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
|
|
GLK_DATA_LANE_STOP_STATE, 20))
|
|
DRM_ERROR("Date lane not in STOP state\n");
|
|
}
|
|
|
|
/* Wait for AFE LATCH */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (intel_de_wait_for_set(dev_priv, BXT_MIPI_PORT_CTRL(port),
|
|
AFE_LATCHOUT, 20))
|
|
DRM_ERROR("D-PHY not entering LP-11 state\n");
|
|
}
|
|
}
|
|
|
|
static void bxt_dsi_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
u32 val;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
/* Enable MIPI PHY transparent latch */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
val = I915_READ(BXT_MIPI_PORT_CTRL(port));
|
|
I915_WRITE(BXT_MIPI_PORT_CTRL(port), val | LP_OUTPUT_HOLD);
|
|
usleep_range(2000, 2500);
|
|
}
|
|
|
|
/* Clear ULPS and set device ready */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
val = I915_READ(MIPI_DEVICE_READY(port));
|
|
val &= ~ULPS_STATE_MASK;
|
|
I915_WRITE(MIPI_DEVICE_READY(port), val);
|
|
usleep_range(2000, 2500);
|
|
val |= DEVICE_READY;
|
|
I915_WRITE(MIPI_DEVICE_READY(port), val);
|
|
}
|
|
}
|
|
|
|
static void vlv_dsi_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
u32 val;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
vlv_flisdsi_get(dev_priv);
|
|
/* program rcomp for compliance, reduce from 50 ohms to 45 ohms
|
|
* needed everytime after power gate */
|
|
vlv_flisdsi_write(dev_priv, 0x04, 0x0004);
|
|
vlv_flisdsi_put(dev_priv);
|
|
|
|
/* bandgap reset is needed after everytime we do power gate */
|
|
band_gap_reset(dev_priv);
|
|
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_ENTER);
|
|
usleep_range(2500, 3000);
|
|
|
|
/* Enable MIPI PHY transparent latch
|
|
* Common bit for both MIPI Port A & MIPI Port C
|
|
* No similar bit in MIPI Port C reg
|
|
*/
|
|
val = I915_READ(MIPI_PORT_CTRL(PORT_A));
|
|
I915_WRITE(MIPI_PORT_CTRL(PORT_A), val | LP_OUTPUT_HOLD);
|
|
usleep_range(1000, 1500);
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_EXIT);
|
|
usleep_range(2500, 3000);
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY);
|
|
usleep_range(2500, 3000);
|
|
}
|
|
}
|
|
|
|
static void intel_dsi_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
|
|
if (IS_GEMINILAKE(dev_priv))
|
|
glk_dsi_device_ready(encoder);
|
|
else if (IS_GEN9_LP(dev_priv))
|
|
bxt_dsi_device_ready(encoder);
|
|
else
|
|
vlv_dsi_device_ready(encoder);
|
|
}
|
|
|
|
static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
u32 val;
|
|
|
|
/* Enter ULPS */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
val = I915_READ(MIPI_DEVICE_READY(port));
|
|
val &= ~ULPS_STATE_MASK;
|
|
val |= (ULPS_STATE_ENTER | DEVICE_READY);
|
|
I915_WRITE(MIPI_DEVICE_READY(port), val);
|
|
}
|
|
|
|
/* Wait for MIPI PHY status bit to unset */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
|
|
GLK_PHY_STATUS_PORT_READY, 20))
|
|
DRM_ERROR("PHY is not turning OFF\n");
|
|
}
|
|
|
|
/* Wait for Pwr ACK bit to unset */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
|
|
GLK_MIPIIO_PORT_POWERED, 20))
|
|
DRM_ERROR("MIPI IO Port is not powergated\n");
|
|
}
|
|
}
|
|
|
|
static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
u32 tmp;
|
|
|
|
/* Put the IO into reset */
|
|
tmp = I915_READ(MIPI_CTRL(PORT_A));
|
|
tmp &= ~GLK_MIPIIO_RESET_RELEASED;
|
|
I915_WRITE(MIPI_CTRL(PORT_A), tmp);
|
|
|
|
/* Wait for MIPI PHY status bit to unset */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
|
|
GLK_PHY_STATUS_PORT_READY, 20))
|
|
DRM_ERROR("PHY is not turning OFF\n");
|
|
}
|
|
|
|
/* Clear MIPI mode */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
tmp = I915_READ(MIPI_CTRL(port));
|
|
tmp &= ~GLK_MIPIIO_ENABLE;
|
|
I915_WRITE(MIPI_CTRL(port), tmp);
|
|
}
|
|
}
|
|
|
|
static void glk_dsi_clear_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
glk_dsi_enter_low_power_mode(encoder);
|
|
glk_dsi_disable_mipi_io(encoder);
|
|
}
|
|
|
|
static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
/* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
|
|
i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
|
|
BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A);
|
|
u32 val;
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
|
|
ULPS_STATE_ENTER);
|
|
usleep_range(2000, 2500);
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
|
|
ULPS_STATE_EXIT);
|
|
usleep_range(2000, 2500);
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
|
|
ULPS_STATE_ENTER);
|
|
usleep_range(2000, 2500);
|
|
|
|
/*
|
|
* On VLV/CHV, wait till Clock lanes are in LP-00 state for MIPI
|
|
* Port A only. MIPI Port C has no similar bit for checking.
|
|
*/
|
|
if ((IS_GEN9_LP(dev_priv) || port == PORT_A) &&
|
|
intel_de_wait_for_clear(dev_priv, port_ctrl,
|
|
AFE_LATCHOUT, 30))
|
|
DRM_ERROR("DSI LP not going Low\n");
|
|
|
|
/* Disable MIPI PHY transparent latch */
|
|
val = I915_READ(port_ctrl);
|
|
I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD);
|
|
usleep_range(1000, 1500);
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(port), 0x00);
|
|
usleep_range(2000, 2500);
|
|
}
|
|
}
|
|
|
|
static void intel_dsi_port_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
|
|
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
|
|
u32 temp;
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
temp = I915_READ(MIPI_CTRL(port));
|
|
temp &= ~BXT_PIXEL_OVERLAP_CNT_MASK |
|
|
intel_dsi->pixel_overlap <<
|
|
BXT_PIXEL_OVERLAP_CNT_SHIFT;
|
|
I915_WRITE(MIPI_CTRL(port), temp);
|
|
}
|
|
} else {
|
|
temp = I915_READ(VLV_CHICKEN_3);
|
|
temp &= ~PIXEL_OVERLAP_CNT_MASK |
|
|
intel_dsi->pixel_overlap <<
|
|
PIXEL_OVERLAP_CNT_SHIFT;
|
|
I915_WRITE(VLV_CHICKEN_3, temp);
|
|
}
|
|
}
|
|
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
|
|
BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
|
|
u32 temp;
|
|
|
|
temp = I915_READ(port_ctrl);
|
|
|
|
temp &= ~LANE_CONFIGURATION_MASK;
|
|
temp &= ~DUAL_LINK_MODE_MASK;
|
|
|
|
if (intel_dsi->ports == (BIT(PORT_A) | BIT(PORT_C))) {
|
|
temp |= (intel_dsi->dual_link - 1)
|
|
<< DUAL_LINK_MODE_SHIFT;
|
|
if (IS_BROXTON(dev_priv))
|
|
temp |= LANE_CONFIGURATION_DUAL_LINK_A;
|
|
else
|
|
temp |= crtc->pipe ?
|
|
LANE_CONFIGURATION_DUAL_LINK_B :
|
|
LANE_CONFIGURATION_DUAL_LINK_A;
|
|
}
|
|
|
|
if (intel_dsi->pixel_format != MIPI_DSI_FMT_RGB888)
|
|
temp |= DITHERING_ENABLE;
|
|
|
|
/* assert ip_tg_enable signal */
|
|
I915_WRITE(port_ctrl, temp | DPI_ENABLE);
|
|
POSTING_READ(port_ctrl);
|
|
}
|
|
}
|
|
|
|
static void intel_dsi_port_disable(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
|
|
BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
|
|
u32 temp;
|
|
|
|
/* de-assert ip_tg_enable signal */
|
|
temp = I915_READ(port_ctrl);
|
|
I915_WRITE(port_ctrl, temp & ~DPI_ENABLE);
|
|
POSTING_READ(port_ctrl);
|
|
}
|
|
}
|
|
|
|
static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
|
|
const struct intel_crtc_state *pipe_config);
|
|
static void intel_dsi_unprepare(struct intel_encoder *encoder);
|
|
|
|
/*
|
|
* Panel enable/disable sequences from the VBT spec.
|
|
*
|
|
* Note the spec has AssertReset / DeassertReset swapped from their
|
|
* usual naming. We use the normal names to avoid confusion (so below
|
|
* they are swapped compared to the spec).
|
|
*
|
|
* Steps starting with MIPI refer to VBT sequences, note that for v2
|
|
* VBTs several steps which have a VBT in v2 are expected to be handled
|
|
* directly by the driver, by directly driving gpios for example.
|
|
*
|
|
* v2 video mode seq v3 video mode seq command mode seq
|
|
* - power on - MIPIPanelPowerOn - power on
|
|
* - wait t1+t2 - wait t1+t2
|
|
* - MIPIDeassertResetPin - MIPIDeassertResetPin - MIPIDeassertResetPin
|
|
* - io lines to lp-11 - io lines to lp-11 - io lines to lp-11
|
|
* - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds
|
|
* - MIPITearOn
|
|
* - MIPIDisplayOn
|
|
* - turn on DPI - turn on DPI - set pipe to dsr mode
|
|
* - MIPIDisplayOn - MIPIDisplayOn
|
|
* - wait t5 - wait t5
|
|
* - backlight on - MIPIBacklightOn - backlight on
|
|
* ... ... ... issue mem cmds ...
|
|
* - backlight off - MIPIBacklightOff - backlight off
|
|
* - wait t6 - wait t6
|
|
* - MIPIDisplayOff
|
|
* - turn off DPI - turn off DPI - disable pipe dsr mode
|
|
* - MIPITearOff
|
|
* - MIPIDisplayOff - MIPIDisplayOff
|
|
* - io lines to lp-00 - io lines to lp-00 - io lines to lp-00
|
|
* - MIPIAssertResetPin - MIPIAssertResetPin - MIPIAssertResetPin
|
|
* - wait t3 - wait t3
|
|
* - power off - MIPIPanelPowerOff - power off
|
|
* - wait t4 - wait t4
|
|
*/
|
|
|
|
/*
|
|
* DSI port enable has to be done before pipe and plane enable, so we do it in
|
|
* the pre_enable hook instead of the enable hook.
|
|
*/
|
|
static void intel_dsi_pre_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
struct drm_crtc *crtc = pipe_config->base.crtc;
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
enum port port;
|
|
u32 val;
|
|
bool glk_cold_boot = false;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
|
|
/*
|
|
* The BIOS may leave the PLL in a wonky state where it doesn't
|
|
* lock. It needs to be fully powered down to fix it.
|
|
*/
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
bxt_dsi_pll_disable(encoder);
|
|
bxt_dsi_pll_enable(encoder, pipe_config);
|
|
} else {
|
|
vlv_dsi_pll_disable(encoder);
|
|
vlv_dsi_pll_enable(encoder, pipe_config);
|
|
}
|
|
|
|
if (IS_BROXTON(dev_priv)) {
|
|
/* Add MIPI IO reset programming for modeset */
|
|
val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
|
|
I915_WRITE(BXT_P_CR_GT_DISP_PWRON,
|
|
val | MIPIO_RST_CTRL);
|
|
|
|
/* Power up DSI regulator */
|
|
I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT);
|
|
I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, 0);
|
|
}
|
|
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
u32 val;
|
|
|
|
/* Disable DPOunit clock gating, can stall pipe */
|
|
val = I915_READ(DSPCLK_GATE_D);
|
|
val |= DPOUNIT_CLOCK_GATE_DISABLE;
|
|
I915_WRITE(DSPCLK_GATE_D, val);
|
|
}
|
|
|
|
if (!IS_GEMINILAKE(dev_priv))
|
|
intel_dsi_prepare(encoder, pipe_config);
|
|
|
|
/* Power on, try both CRC pmic gpio and VBT */
|
|
if (intel_dsi->gpio_panel)
|
|
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
|
|
intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay);
|
|
|
|
/* Deassert reset */
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
|
|
|
|
if (IS_GEMINILAKE(dev_priv)) {
|
|
glk_cold_boot = glk_dsi_enable_io(encoder);
|
|
|
|
/* Prepare port in cold boot(s3/s4) scenario */
|
|
if (glk_cold_boot)
|
|
intel_dsi_prepare(encoder, pipe_config);
|
|
}
|
|
|
|
/* Put device in ready state (LP-11) */
|
|
intel_dsi_device_ready(encoder);
|
|
|
|
/* Prepare port in normal boot scenario */
|
|
if (IS_GEMINILAKE(dev_priv) && !glk_cold_boot)
|
|
intel_dsi_prepare(encoder, pipe_config);
|
|
|
|
/* Send initialization commands in LP mode */
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
|
|
|
|
/* Enable port in pre-enable phase itself because as per hw team
|
|
* recommendation, port should be enabled befor plane & pipe */
|
|
if (is_cmd_mode(intel_dsi)) {
|
|
for_each_dsi_port(port, intel_dsi->ports)
|
|
I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(port), 8 * 4);
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_ON);
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
|
|
} else {
|
|
msleep(20); /* XXX */
|
|
for_each_dsi_port(port, intel_dsi->ports)
|
|
dpi_send_cmd(intel_dsi, TURN_ON, false, port);
|
|
intel_dsi_msleep(intel_dsi, 100);
|
|
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
|
|
|
|
intel_dsi_port_enable(encoder, pipe_config);
|
|
}
|
|
|
|
intel_panel_enable_backlight(pipe_config, conn_state);
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_ON);
|
|
}
|
|
|
|
/*
|
|
* DSI port disable has to be done after pipe and plane disable, so we do it in
|
|
* the post_disable hook.
|
|
*/
|
|
static void intel_dsi_disable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
|
|
intel_panel_disable_backlight(old_conn_state);
|
|
|
|
/*
|
|
* According to the spec we should send SHUTDOWN before
|
|
* MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but field testing
|
|
* has shown that the v3 sequence works for v2 VBTs too
|
|
*/
|
|
if (is_vid_mode(intel_dsi)) {
|
|
/* Send Shutdown command to the panel in LP mode */
|
|
for_each_dsi_port(port, intel_dsi->ports)
|
|
dpi_send_cmd(intel_dsi, SHUTDOWN, false, port);
|
|
msleep(10);
|
|
}
|
|
}
|
|
|
|
static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
|
|
if (IS_GEMINILAKE(dev_priv))
|
|
glk_dsi_clear_device_ready(encoder);
|
|
else
|
|
vlv_dsi_clear_device_ready(encoder);
|
|
}
|
|
|
|
static void intel_dsi_post_disable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
u32 val;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (is_vid_mode(intel_dsi)) {
|
|
for_each_dsi_port(port, intel_dsi->ports)
|
|
vlv_dsi_wait_for_fifo_empty(intel_dsi, port);
|
|
|
|
intel_dsi_port_disable(encoder);
|
|
usleep_range(2000, 5000);
|
|
}
|
|
|
|
intel_dsi_unprepare(encoder);
|
|
|
|
/*
|
|
* if disable packets are sent before sending shutdown packet then in
|
|
* some next enable sequence send turn on packet error is observed
|
|
*/
|
|
if (is_cmd_mode(intel_dsi))
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_OFF);
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_OFF);
|
|
|
|
/* Transition to LP-00 */
|
|
intel_dsi_clear_device_ready(encoder);
|
|
|
|
if (IS_BROXTON(dev_priv)) {
|
|
/* Power down DSI regulator to save power */
|
|
I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT);
|
|
I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, HS_IO_CTRL_SELECT);
|
|
|
|
/* Add MIPI IO reset programming for modeset */
|
|
val = I915_READ(BXT_P_CR_GT_DISP_PWRON);
|
|
I915_WRITE(BXT_P_CR_GT_DISP_PWRON,
|
|
val & ~MIPIO_RST_CTRL);
|
|
}
|
|
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
bxt_dsi_pll_disable(encoder);
|
|
} else {
|
|
u32 val;
|
|
|
|
vlv_dsi_pll_disable(encoder);
|
|
|
|
val = I915_READ(DSPCLK_GATE_D);
|
|
val &= ~DPOUNIT_CLOCK_GATE_DISABLE;
|
|
I915_WRITE(DSPCLK_GATE_D, val);
|
|
}
|
|
|
|
/* Assert reset */
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
|
|
|
|
/* Power off, try both CRC pmic gpio and VBT */
|
|
intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay);
|
|
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
|
|
if (intel_dsi->gpio_panel)
|
|
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
|
|
|
|
/*
|
|
* FIXME As we do with eDP, just make a note of the time here
|
|
* and perform the wait before the next panel power on.
|
|
*/
|
|
intel_dsi_msleep(intel_dsi, intel_dsi->panel_pwr_cycle_delay);
|
|
}
|
|
|
|
static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
|
|
enum pipe *pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
intel_wakeref_t wakeref;
|
|
enum port port;
|
|
bool active = false;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
wakeref = intel_display_power_get_if_enabled(dev_priv,
|
|
encoder->power_domain);
|
|
if (!wakeref)
|
|
return false;
|
|
|
|
/*
|
|
* On Broxton the PLL needs to be enabled with a valid divider
|
|
* configuration, otherwise accessing DSI registers will hang the
|
|
* machine. See BSpec North Display Engine registers/MIPI[BXT].
|
|
*/
|
|
if (IS_GEN9_LP(dev_priv) && !bxt_dsi_pll_is_enabled(dev_priv))
|
|
goto out_put_power;
|
|
|
|
/* XXX: this only works for one DSI output */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
i915_reg_t ctrl_reg = IS_GEN9_LP(dev_priv) ?
|
|
BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
|
|
bool enabled = I915_READ(ctrl_reg) & DPI_ENABLE;
|
|
|
|
/*
|
|
* Due to some hardware limitations on VLV/CHV, the DPI enable
|
|
* bit in port C control register does not get set. As a
|
|
* workaround, check pipe B conf instead.
|
|
*/
|
|
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
|
|
port == PORT_C)
|
|
enabled = I915_READ(PIPECONF(PIPE_B)) & PIPECONF_ENABLE;
|
|
|
|
/* Try command mode if video mode not enabled */
|
|
if (!enabled) {
|
|
u32 tmp = I915_READ(MIPI_DSI_FUNC_PRG(port));
|
|
enabled = tmp & CMD_MODE_DATA_WIDTH_MASK;
|
|
}
|
|
|
|
if (!enabled)
|
|
continue;
|
|
|
|
if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY))
|
|
continue;
|
|
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
u32 tmp = I915_READ(MIPI_CTRL(port));
|
|
tmp &= BXT_PIPE_SELECT_MASK;
|
|
tmp >>= BXT_PIPE_SELECT_SHIFT;
|
|
|
|
if (WARN_ON(tmp > PIPE_C))
|
|
continue;
|
|
|
|
*pipe = tmp;
|
|
} else {
|
|
*pipe = port == PORT_A ? PIPE_A : PIPE_B;
|
|
}
|
|
|
|
active = true;
|
|
break;
|
|
}
|
|
|
|
out_put_power:
|
|
intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
|
|
|
|
return active;
|
|
}
|
|
|
|
static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct drm_display_mode *adjusted_mode =
|
|
&pipe_config->base.adjusted_mode;
|
|
struct drm_display_mode *adjusted_mode_sw;
|
|
struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
unsigned int lane_count = intel_dsi->lane_count;
|
|
unsigned int bpp, fmt;
|
|
enum port port;
|
|
u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
|
|
u16 hfp_sw, hsync_sw, hbp_sw;
|
|
u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
|
|
crtc_hblank_start_sw, crtc_hblank_end_sw;
|
|
|
|
/* FIXME: hw readout should not depend on SW state */
|
|
adjusted_mode_sw = &crtc->config->base.adjusted_mode;
|
|
|
|
/*
|
|
* Atleast one port is active as encoder->get_config called only if
|
|
* encoder->get_hw_state() returns true.
|
|
*/
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (I915_READ(BXT_MIPI_PORT_CTRL(port)) & DPI_ENABLE)
|
|
break;
|
|
}
|
|
|
|
fmt = I915_READ(MIPI_DSI_FUNC_PRG(port)) & VID_MODE_FORMAT_MASK;
|
|
bpp = mipi_dsi_pixel_format_to_bpp(
|
|
pixel_format_from_register_bits(fmt));
|
|
|
|
pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
|
|
|
|
/* Enable Frame time stamo based scanline reporting */
|
|
adjusted_mode->private_flags |=
|
|
I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP;
|
|
|
|
/* In terms of pixels */
|
|
adjusted_mode->crtc_hdisplay =
|
|
I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
|
|
adjusted_mode->crtc_vdisplay =
|
|
I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
|
|
adjusted_mode->crtc_vtotal =
|
|
I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
|
|
|
|
hactive = adjusted_mode->crtc_hdisplay;
|
|
hfp = I915_READ(MIPI_HFP_COUNT(port));
|
|
|
|
/*
|
|
* Meaningful for video mode non-burst sync pulse mode only,
|
|
* can be zero for non-burst sync events and burst modes
|
|
*/
|
|
hsync = I915_READ(MIPI_HSYNC_PADDING_COUNT(port));
|
|
hbp = I915_READ(MIPI_HBP_COUNT(port));
|
|
|
|
/* harizontal values are in terms of high speed byte clock */
|
|
hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
hbp = pixels_from_txbyteclkhs(hbp, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
|
|
if (intel_dsi->dual_link) {
|
|
hfp *= 2;
|
|
hsync *= 2;
|
|
hbp *= 2;
|
|
}
|
|
|
|
/* vertical values are in terms of lines */
|
|
vfp = I915_READ(MIPI_VFP_COUNT(port));
|
|
vsync = I915_READ(MIPI_VSYNC_PADDING_COUNT(port));
|
|
vbp = I915_READ(MIPI_VBP_COUNT(port));
|
|
|
|
adjusted_mode->crtc_htotal = hactive + hfp + hsync + hbp;
|
|
adjusted_mode->crtc_hsync_start = hfp + adjusted_mode->crtc_hdisplay;
|
|
adjusted_mode->crtc_hsync_end = hsync + adjusted_mode->crtc_hsync_start;
|
|
adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay;
|
|
adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal;
|
|
|
|
adjusted_mode->crtc_vsync_start = vfp + adjusted_mode->crtc_vdisplay;
|
|
adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start;
|
|
adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay;
|
|
adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
|
|
|
|
/*
|
|
* In BXT DSI there is no regs programmed with few horizontal timings
|
|
* in Pixels but txbyteclkhs.. So retrieval process adds some
|
|
* ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs.
|
|
* Actually here for the given adjusted_mode, we are calculating the
|
|
* value programmed to the port and then back to the horizontal timing
|
|
* param in pixels. This is the expected value, including roundup errors
|
|
* And if that is same as retrieved value from port, then
|
|
* (HW state) adjusted_mode's horizontal timings are corrected to
|
|
* match with SW state to nullify the errors.
|
|
*/
|
|
/* Calculating the value programmed to the Port register */
|
|
hfp_sw = adjusted_mode_sw->crtc_hsync_start -
|
|
adjusted_mode_sw->crtc_hdisplay;
|
|
hsync_sw = adjusted_mode_sw->crtc_hsync_end -
|
|
adjusted_mode_sw->crtc_hsync_start;
|
|
hbp_sw = adjusted_mode_sw->crtc_htotal -
|
|
adjusted_mode_sw->crtc_hsync_end;
|
|
|
|
if (intel_dsi->dual_link) {
|
|
hfp_sw /= 2;
|
|
hsync_sw /= 2;
|
|
hbp_sw /= 2;
|
|
}
|
|
|
|
hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
|
|
/* Reverse calculating the adjusted mode parameters from port reg vals*/
|
|
hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
|
|
if (intel_dsi->dual_link) {
|
|
hfp_sw *= 2;
|
|
hsync_sw *= 2;
|
|
hbp_sw *= 2;
|
|
}
|
|
|
|
crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw +
|
|
hsync_sw + hbp_sw;
|
|
crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay;
|
|
crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw;
|
|
crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay;
|
|
crtc_hblank_end_sw = crtc_htotal_sw;
|
|
|
|
if (adjusted_mode->crtc_htotal == crtc_htotal_sw)
|
|
adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal;
|
|
|
|
if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw)
|
|
adjusted_mode->crtc_hsync_start =
|
|
adjusted_mode_sw->crtc_hsync_start;
|
|
|
|
if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw)
|
|
adjusted_mode->crtc_hsync_end =
|
|
adjusted_mode_sw->crtc_hsync_end;
|
|
|
|
if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw)
|
|
adjusted_mode->crtc_hblank_start =
|
|
adjusted_mode_sw->crtc_hblank_start;
|
|
|
|
if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
|
|
adjusted_mode->crtc_hblank_end =
|
|
adjusted_mode_sw->crtc_hblank_end;
|
|
}
|
|
|
|
static void intel_dsi_get_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
u32 pclk;
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
|
|
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
bxt_dsi_get_pipe_config(encoder, pipe_config);
|
|
pclk = bxt_dsi_get_pclk(encoder, pipe_config);
|
|
} else {
|
|
pclk = vlv_dsi_get_pclk(encoder, pipe_config);
|
|
}
|
|
|
|
if (pclk) {
|
|
pipe_config->base.adjusted_mode.crtc_clock = pclk;
|
|
pipe_config->port_clock = pclk;
|
|
}
|
|
}
|
|
|
|
/* return txclkesc cycles in terms of divider and duration in us */
|
|
static u16 txclkesc(u32 divider, unsigned int us)
|
|
{
|
|
switch (divider) {
|
|
case ESCAPE_CLOCK_DIVIDER_1:
|
|
default:
|
|
return 20 * us;
|
|
case ESCAPE_CLOCK_DIVIDER_2:
|
|
return 10 * us;
|
|
case ESCAPE_CLOCK_DIVIDER_4:
|
|
return 5 * us;
|
|
}
|
|
}
|
|
|
|
static void set_dsi_timings(struct drm_encoder *encoder,
|
|
const struct drm_display_mode *adjusted_mode)
|
|
{
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
|
|
enum port port;
|
|
unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
|
|
unsigned int lane_count = intel_dsi->lane_count;
|
|
|
|
u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
|
|
|
|
hactive = adjusted_mode->crtc_hdisplay;
|
|
hfp = adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_hdisplay;
|
|
hsync = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
|
|
hbp = adjusted_mode->crtc_htotal - adjusted_mode->crtc_hsync_end;
|
|
|
|
if (intel_dsi->dual_link) {
|
|
hactive /= 2;
|
|
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
|
|
hactive += intel_dsi->pixel_overlap;
|
|
hfp /= 2;
|
|
hsync /= 2;
|
|
hbp /= 2;
|
|
}
|
|
|
|
vfp = adjusted_mode->crtc_vsync_start - adjusted_mode->crtc_vdisplay;
|
|
vsync = adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start;
|
|
vbp = adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vsync_end;
|
|
|
|
/* horizontal values are in terms of high speed byte clock */
|
|
hactive = txbyteclkhs(hactive, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
hfp = txbyteclkhs(hfp, bpp, lane_count, intel_dsi->burst_mode_ratio);
|
|
hsync = txbyteclkhs(hsync, bpp, lane_count,
|
|
intel_dsi->burst_mode_ratio);
|
|
hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
|
|
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
/*
|
|
* Program hdisplay and vdisplay on MIPI transcoder.
|
|
* This is different from calculated hactive and
|
|
* vactive, as they are calculated per channel basis,
|
|
* whereas these values should be based on resolution.
|
|
*/
|
|
I915_WRITE(BXT_MIPI_TRANS_HACTIVE(port),
|
|
adjusted_mode->crtc_hdisplay);
|
|
I915_WRITE(BXT_MIPI_TRANS_VACTIVE(port),
|
|
adjusted_mode->crtc_vdisplay);
|
|
I915_WRITE(BXT_MIPI_TRANS_VTOTAL(port),
|
|
adjusted_mode->crtc_vtotal);
|
|
}
|
|
|
|
I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
|
|
I915_WRITE(MIPI_HFP_COUNT(port), hfp);
|
|
|
|
/* meaningful for video mode non-burst sync pulse mode only,
|
|
* can be zero for non-burst sync events and burst modes */
|
|
I915_WRITE(MIPI_HSYNC_PADDING_COUNT(port), hsync);
|
|
I915_WRITE(MIPI_HBP_COUNT(port), hbp);
|
|
|
|
/* vertical values are in terms of lines */
|
|
I915_WRITE(MIPI_VFP_COUNT(port), vfp);
|
|
I915_WRITE(MIPI_VSYNC_PADDING_COUNT(port), vsync);
|
|
I915_WRITE(MIPI_VBP_COUNT(port), vbp);
|
|
}
|
|
}
|
|
|
|
static u32 pixel_format_to_reg(enum mipi_dsi_pixel_format fmt)
|
|
{
|
|
switch (fmt) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
return VID_MODE_FORMAT_RGB888;
|
|
case MIPI_DSI_FMT_RGB666:
|
|
return VID_MODE_FORMAT_RGB666;
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
return VID_MODE_FORMAT_RGB666_PACKED;
|
|
case MIPI_DSI_FMT_RGB565:
|
|
return VID_MODE_FORMAT_RGB565;
|
|
default:
|
|
MISSING_CASE(fmt);
|
|
return VID_MODE_FORMAT_RGB666;
|
|
}
|
|
}
|
|
|
|
static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_encoder *encoder = &intel_encoder->base;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
|
|
const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
|
|
enum port port;
|
|
unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
|
|
u32 val, tmp;
|
|
u16 mode_hdisplay;
|
|
|
|
DRM_DEBUG_KMS("pipe %c\n", pipe_name(intel_crtc->pipe));
|
|
|
|
mode_hdisplay = adjusted_mode->crtc_hdisplay;
|
|
|
|
if (intel_dsi->dual_link) {
|
|
mode_hdisplay /= 2;
|
|
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
|
|
mode_hdisplay += intel_dsi->pixel_overlap;
|
|
}
|
|
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
/*
|
|
* escape clock divider, 20MHz, shared for A and C.
|
|
* device ready must be off when doing this! txclkesc?
|
|
*/
|
|
tmp = I915_READ(MIPI_CTRL(PORT_A));
|
|
tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
|
|
I915_WRITE(MIPI_CTRL(PORT_A), tmp |
|
|
ESCAPE_CLOCK_DIVIDER_1);
|
|
|
|
/* read request priority is per pipe */
|
|
tmp = I915_READ(MIPI_CTRL(port));
|
|
tmp &= ~READ_REQUEST_PRIORITY_MASK;
|
|
I915_WRITE(MIPI_CTRL(port), tmp |
|
|
READ_REQUEST_PRIORITY_HIGH);
|
|
} else if (IS_GEN9_LP(dev_priv)) {
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
|
|
tmp = I915_READ(MIPI_CTRL(port));
|
|
tmp &= ~BXT_PIPE_SELECT_MASK;
|
|
|
|
tmp |= BXT_PIPE_SELECT(pipe);
|
|
I915_WRITE(MIPI_CTRL(port), tmp);
|
|
}
|
|
|
|
/* XXX: why here, why like this? handling in irq handler?! */
|
|
I915_WRITE(MIPI_INTR_STAT(port), 0xffffffff);
|
|
I915_WRITE(MIPI_INTR_EN(port), 0xffffffff);
|
|
|
|
I915_WRITE(MIPI_DPHY_PARAM(port), intel_dsi->dphy_reg);
|
|
|
|
I915_WRITE(MIPI_DPI_RESOLUTION(port),
|
|
adjusted_mode->crtc_vdisplay << VERTICAL_ADDRESS_SHIFT |
|
|
mode_hdisplay << HORIZONTAL_ADDRESS_SHIFT);
|
|
}
|
|
|
|
set_dsi_timings(encoder, adjusted_mode);
|
|
|
|
val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT;
|
|
if (is_cmd_mode(intel_dsi)) {
|
|
val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT;
|
|
val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */
|
|
} else {
|
|
val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT;
|
|
val |= pixel_format_to_reg(intel_dsi->pixel_format);
|
|
}
|
|
|
|
tmp = 0;
|
|
if (intel_dsi->eotp_pkt == 0)
|
|
tmp |= EOT_DISABLE;
|
|
if (intel_dsi->clock_stop)
|
|
tmp |= CLOCKSTOP;
|
|
|
|
if (IS_GEN9_LP(dev_priv)) {
|
|
tmp |= BXT_DPHY_DEFEATURE_EN;
|
|
if (!is_cmd_mode(intel_dsi))
|
|
tmp |= BXT_DEFEATURE_DPI_FIFO_CTR;
|
|
}
|
|
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
|
|
|
|
/* timeouts for recovery. one frame IIUC. if counter expires,
|
|
* EOT and stop state. */
|
|
|
|
/*
|
|
* In burst mode, value greater than one DPI line Time in byte
|
|
* clock (txbyteclkhs) To timeout this timer 1+ of the above
|
|
* said value is recommended.
|
|
*
|
|
* In non-burst mode, Value greater than one DPI frame time in
|
|
* byte clock(txbyteclkhs) To timeout this timer 1+ of the above
|
|
* said value is recommended.
|
|
*
|
|
* In DBI only mode, value greater than one DBI frame time in
|
|
* byte clock(txbyteclkhs) To timeout this timer 1+ of the above
|
|
* said value is recommended.
|
|
*/
|
|
|
|
if (is_vid_mode(intel_dsi) &&
|
|
intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
|
|
I915_WRITE(MIPI_HS_TX_TIMEOUT(port),
|
|
txbyteclkhs(adjusted_mode->crtc_htotal, bpp,
|
|
intel_dsi->lane_count,
|
|
intel_dsi->burst_mode_ratio) + 1);
|
|
} else {
|
|
I915_WRITE(MIPI_HS_TX_TIMEOUT(port),
|
|
txbyteclkhs(adjusted_mode->crtc_vtotal *
|
|
adjusted_mode->crtc_htotal,
|
|
bpp, intel_dsi->lane_count,
|
|
intel_dsi->burst_mode_ratio) + 1);
|
|
}
|
|
I915_WRITE(MIPI_LP_RX_TIMEOUT(port), intel_dsi->lp_rx_timeout);
|
|
I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(port),
|
|
intel_dsi->turn_arnd_val);
|
|
I915_WRITE(MIPI_DEVICE_RESET_TIMER(port),
|
|
intel_dsi->rst_timer_val);
|
|
|
|
/* dphy stuff */
|
|
|
|
/* in terms of low power clock */
|
|
I915_WRITE(MIPI_INIT_COUNT(port),
|
|
txclkesc(intel_dsi->escape_clk_div, 100));
|
|
|
|
if (IS_GEN9_LP(dev_priv) && (!intel_dsi->dual_link)) {
|
|
/*
|
|
* BXT spec says write MIPI_INIT_COUNT for
|
|
* both the ports, even if only one is
|
|
* getting used. So write the other port
|
|
* if not in dual link mode.
|
|
*/
|
|
I915_WRITE(MIPI_INIT_COUNT(port ==
|
|
PORT_A ? PORT_C : PORT_A),
|
|
intel_dsi->init_count);
|
|
}
|
|
|
|
/* recovery disables */
|
|
I915_WRITE(MIPI_EOT_DISABLE(port), tmp);
|
|
|
|
/* in terms of low power clock */
|
|
I915_WRITE(MIPI_INIT_COUNT(port), intel_dsi->init_count);
|
|
|
|
/* in terms of txbyteclkhs. actual high to low switch +
|
|
* MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK.
|
|
*
|
|
* XXX: write MIPI_STOP_STATE_STALL?
|
|
*/
|
|
I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(port),
|
|
intel_dsi->hs_to_lp_count);
|
|
|
|
/* XXX: low power clock equivalence in terms of byte clock.
|
|
* the number of byte clocks occupied in one low power clock.
|
|
* based on txbyteclkhs and txclkesc.
|
|
* txclkesc time / txbyteclk time * (105 + MIPI_STOP_STATE_STALL
|
|
* ) / 105.???
|
|
*/
|
|
I915_WRITE(MIPI_LP_BYTECLK(port), intel_dsi->lp_byte_clk);
|
|
|
|
if (IS_GEMINILAKE(dev_priv)) {
|
|
I915_WRITE(MIPI_TLPX_TIME_COUNT(port),
|
|
intel_dsi->lp_byte_clk);
|
|
/* Shadow of DPHY reg */
|
|
I915_WRITE(MIPI_CLK_LANE_TIMING(port),
|
|
intel_dsi->dphy_reg);
|
|
}
|
|
|
|
/* the bw essential for transmitting 16 long packets containing
|
|
* 252 bytes meant for dcs write memory command is programmed in
|
|
* this register in terms of byte clocks. based on dsi transfer
|
|
* rate and the number of lanes configured the time taken to
|
|
* transmit 16 long packets in a dsi stream varies. */
|
|
I915_WRITE(MIPI_DBI_BW_CTRL(port), intel_dsi->bw_timer);
|
|
|
|
I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(port),
|
|
intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT |
|
|
intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT);
|
|
|
|
if (is_vid_mode(intel_dsi))
|
|
/* Some panels might have resolution which is not a
|
|
* multiple of 64 like 1366 x 768. Enable RANDOM
|
|
* resolution support for such panels by default */
|
|
I915_WRITE(MIPI_VIDEO_MODE_FORMAT(port),
|
|
intel_dsi->video_frmt_cfg_bits |
|
|
intel_dsi->video_mode_format |
|
|
IP_TG_CONFIG |
|
|
RANDOM_DPI_DISPLAY_RESOLUTION);
|
|
}
|
|
}
|
|
|
|
static void intel_dsi_unprepare(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
enum port port;
|
|
u32 val;
|
|
|
|
if (IS_GEMINILAKE(dev_priv))
|
|
return;
|
|
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
/* Panel commands can be sent when clock is in LP11 */
|
|
I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
|
|
|
|
if (IS_GEN9_LP(dev_priv))
|
|
bxt_dsi_reset_clocks(encoder, port);
|
|
else
|
|
vlv_dsi_reset_clocks(encoder, port);
|
|
I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
|
|
|
|
val = I915_READ(MIPI_DSI_FUNC_PRG(port));
|
|
val &= ~VID_MODE_FORMAT_MASK;
|
|
I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
|
|
}
|
|
}
|
|
|
|
static void intel_dsi_encoder_destroy(struct drm_encoder *encoder)
|
|
{
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
|
|
|
|
/* dispose of the gpios */
|
|
if (intel_dsi->gpio_panel)
|
|
gpiod_put(intel_dsi->gpio_panel);
|
|
|
|
intel_encoder_destroy(encoder);
|
|
}
|
|
|
|
static const struct drm_encoder_funcs intel_dsi_funcs = {
|
|
.destroy = intel_dsi_encoder_destroy,
|
|
};
|
|
|
|
static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
|
|
.get_modes = intel_dsi_get_modes,
|
|
.mode_valid = intel_dsi_mode_valid,
|
|
.atomic_check = intel_digital_connector_atomic_check,
|
|
};
|
|
|
|
static const struct drm_connector_funcs intel_dsi_connector_funcs = {
|
|
.late_register = intel_connector_register,
|
|
.early_unregister = intel_connector_unregister,
|
|
.destroy = intel_connector_destroy,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.atomic_get_property = intel_digital_connector_atomic_get_property,
|
|
.atomic_set_property = intel_digital_connector_atomic_set_property,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
.atomic_duplicate_state = intel_digital_connector_duplicate_state,
|
|
};
|
|
|
|
static enum drm_panel_orientation
|
|
vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
|
|
struct intel_encoder *encoder = connector->encoder;
|
|
enum intel_display_power_domain power_domain;
|
|
enum drm_panel_orientation orientation;
|
|
struct intel_plane *plane;
|
|
struct intel_crtc *crtc;
|
|
intel_wakeref_t wakeref;
|
|
enum pipe pipe;
|
|
u32 val;
|
|
|
|
if (!encoder->get_hw_state(encoder, &pipe))
|
|
return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
|
|
|
|
crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
|
|
plane = to_intel_plane(crtc->base.primary);
|
|
|
|
power_domain = POWER_DOMAIN_PIPE(pipe);
|
|
wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
|
|
if (!wakeref)
|
|
return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
|
|
|
|
val = I915_READ(DSPCNTR(plane->i9xx_plane));
|
|
|
|
if (!(val & DISPLAY_PLANE_ENABLE))
|
|
orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
|
|
else if (val & DISPPLANE_ROTATE_180)
|
|
orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
|
|
else
|
|
orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
|
|
|
|
intel_display_power_put(dev_priv, power_domain, wakeref);
|
|
|
|
return orientation;
|
|
}
|
|
|
|
static enum drm_panel_orientation
|
|
vlv_dsi_get_panel_orientation(struct intel_connector *connector)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
|
|
enum drm_panel_orientation orientation;
|
|
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
orientation = vlv_dsi_get_hw_panel_orientation(connector);
|
|
if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
|
|
return orientation;
|
|
}
|
|
|
|
return intel_dsi_get_panel_orientation(connector);
|
|
}
|
|
|
|
static void vlv_dsi_add_properties(struct intel_connector *connector)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
|
|
|
|
if (connector->panel.fixed_mode) {
|
|
u32 allowed_scalers;
|
|
|
|
allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) | BIT(DRM_MODE_SCALE_FULLSCREEN);
|
|
if (!HAS_GMCH(dev_priv))
|
|
allowed_scalers |= BIT(DRM_MODE_SCALE_CENTER);
|
|
|
|
drm_connector_attach_scaling_mode_property(&connector->base,
|
|
allowed_scalers);
|
|
|
|
connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
|
|
|
|
connector->base.display_info.panel_orientation =
|
|
vlv_dsi_get_panel_orientation(connector);
|
|
drm_connector_init_panel_orientation_property(
|
|
&connector->base,
|
|
connector->panel.fixed_mode->hdisplay,
|
|
connector->panel.fixed_mode->vdisplay);
|
|
}
|
|
}
|
|
|
|
#define NS_KHZ_RATIO 1000000
|
|
|
|
#define PREPARE_CNT_MAX 0x3F
|
|
#define EXIT_ZERO_CNT_MAX 0x3F
|
|
#define CLK_ZERO_CNT_MAX 0xFF
|
|
#define TRAIL_CNT_MAX 0x1F
|
|
|
|
static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
|
|
{
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
|
|
u32 tlpx_ns, extra_byte_count, tlpx_ui;
|
|
u32 ui_num, ui_den;
|
|
u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
|
|
u32 ths_prepare_ns, tclk_trail_ns;
|
|
u32 tclk_prepare_clkzero, ths_prepare_hszero;
|
|
u32 lp_to_hs_switch, hs_to_lp_switch;
|
|
u32 mul;
|
|
|
|
tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
|
|
|
|
switch (intel_dsi->lane_count) {
|
|
case 1:
|
|
case 2:
|
|
extra_byte_count = 2;
|
|
break;
|
|
case 3:
|
|
extra_byte_count = 4;
|
|
break;
|
|
case 4:
|
|
default:
|
|
extra_byte_count = 3;
|
|
break;
|
|
}
|
|
|
|
/* in Kbps */
|
|
ui_num = NS_KHZ_RATIO;
|
|
ui_den = intel_dsi_bitrate(intel_dsi);
|
|
|
|
tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
|
|
ths_prepare_hszero = mipi_config->ths_prepare_hszero;
|
|
|
|
/*
|
|
* B060
|
|
* LP byte clock = TLPX/ (8UI)
|
|
*/
|
|
intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
|
|
|
|
/* DDR clock period = 2 * UI
|
|
* UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
|
|
* UI(nsec) = 10^6 / bitrate
|
|
* DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
|
|
* DDR clock count = ns_value / DDR clock period
|
|
*
|
|
* For GEMINILAKE dphy_param_reg will be programmed in terms of
|
|
* HS byte clock count for other platform in HS ddr clock count
|
|
*/
|
|
mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
|
|
ths_prepare_ns = max(mipi_config->ths_prepare,
|
|
mipi_config->tclk_prepare);
|
|
|
|
/* prepare count */
|
|
prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
|
|
|
|
if (prepare_cnt > PREPARE_CNT_MAX) {
|
|
DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
|
|
prepare_cnt = PREPARE_CNT_MAX;
|
|
}
|
|
|
|
/* exit zero count */
|
|
exit_zero_cnt = DIV_ROUND_UP(
|
|
(ths_prepare_hszero - ths_prepare_ns) * ui_den,
|
|
ui_num * mul
|
|
);
|
|
|
|
/*
|
|
* Exit zero is unified val ths_zero and ths_exit
|
|
* minimum value for ths_exit = 110ns
|
|
* min (exit_zero_cnt * 2) = 110/UI
|
|
* exit_zero_cnt = 55/UI
|
|
*/
|
|
if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
|
|
exit_zero_cnt += 1;
|
|
|
|
if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
|
|
DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
|
|
exit_zero_cnt = EXIT_ZERO_CNT_MAX;
|
|
}
|
|
|
|
/* clk zero count */
|
|
clk_zero_cnt = DIV_ROUND_UP(
|
|
(tclk_prepare_clkzero - ths_prepare_ns)
|
|
* ui_den, ui_num * mul);
|
|
|
|
if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
|
|
DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
|
|
clk_zero_cnt = CLK_ZERO_CNT_MAX;
|
|
}
|
|
|
|
/* trail count */
|
|
tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
|
|
trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
|
|
|
|
if (trail_cnt > TRAIL_CNT_MAX) {
|
|
DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
|
|
trail_cnt = TRAIL_CNT_MAX;
|
|
}
|
|
|
|
/* B080 */
|
|
intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
|
|
clk_zero_cnt << 8 | prepare_cnt;
|
|
|
|
/*
|
|
* LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
|
|
* mul + 10UI + Extra Byte Count
|
|
*
|
|
* HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
|
|
* Extra Byte Count is calculated according to number of lanes.
|
|
* High Low Switch Count is the Max of LP to HS and
|
|
* HS to LP switch count
|
|
*
|
|
*/
|
|
tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
|
|
|
|
/* B044 */
|
|
/* FIXME:
|
|
* The comment above does not match with the code */
|
|
lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
|
|
exit_zero_cnt * mul + 10, 8);
|
|
|
|
hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
|
|
|
|
intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
|
|
intel_dsi->hs_to_lp_count += extra_byte_count;
|
|
|
|
/* B088 */
|
|
/* LP -> HS for clock lanes
|
|
* LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
|
|
* extra byte count
|
|
* 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
|
|
* 2(in UI) + extra byte count
|
|
* In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
|
|
* 8 + extra byte count
|
|
*/
|
|
intel_dsi->clk_lp_to_hs_count =
|
|
DIV_ROUND_UP(
|
|
4 * tlpx_ui + prepare_cnt * 2 +
|
|
clk_zero_cnt * 2,
|
|
8);
|
|
|
|
intel_dsi->clk_lp_to_hs_count += extra_byte_count;
|
|
|
|
/* HS->LP for Clock Lanes
|
|
* Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
|
|
* Extra byte count
|
|
* 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
|
|
* In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
|
|
* Extra byte count
|
|
*/
|
|
intel_dsi->clk_hs_to_lp_count =
|
|
DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
|
|
8);
|
|
intel_dsi->clk_hs_to_lp_count += extra_byte_count;
|
|
|
|
intel_dsi_log_params(intel_dsi);
|
|
}
|
|
|
|
void vlv_dsi_init(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct intel_dsi *intel_dsi;
|
|
struct intel_encoder *intel_encoder;
|
|
struct drm_encoder *encoder;
|
|
struct intel_connector *intel_connector;
|
|
struct drm_connector *connector;
|
|
struct drm_display_mode *current_mode, *fixed_mode;
|
|
enum port port;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
/* There is no detection method for MIPI so rely on VBT */
|
|
if (!intel_bios_is_dsi_present(dev_priv, &port))
|
|
return;
|
|
|
|
if (IS_GEN9_LP(dev_priv))
|
|
dev_priv->mipi_mmio_base = BXT_MIPI_BASE;
|
|
else
|
|
dev_priv->mipi_mmio_base = VLV_MIPI_BASE;
|
|
|
|
intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
|
|
if (!intel_dsi)
|
|
return;
|
|
|
|
intel_connector = intel_connector_alloc();
|
|
if (!intel_connector) {
|
|
kfree(intel_dsi);
|
|
return;
|
|
}
|
|
|
|
intel_encoder = &intel_dsi->base;
|
|
encoder = &intel_encoder->base;
|
|
intel_dsi->attached_connector = intel_connector;
|
|
|
|
connector = &intel_connector->base;
|
|
|
|
drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI,
|
|
"DSI %c", port_name(port));
|
|
|
|
intel_encoder->compute_config = intel_dsi_compute_config;
|
|
intel_encoder->pre_enable = intel_dsi_pre_enable;
|
|
intel_encoder->disable = intel_dsi_disable;
|
|
intel_encoder->post_disable = intel_dsi_post_disable;
|
|
intel_encoder->get_hw_state = intel_dsi_get_hw_state;
|
|
intel_encoder->get_config = intel_dsi_get_config;
|
|
intel_encoder->update_pipe = intel_panel_update_backlight;
|
|
|
|
intel_connector->get_hw_state = intel_connector_get_hw_state;
|
|
|
|
intel_encoder->port = port;
|
|
intel_encoder->type = INTEL_OUTPUT_DSI;
|
|
intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI;
|
|
intel_encoder->cloneable = 0;
|
|
|
|
/*
|
|
* On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI
|
|
* port C. BXT isn't limited like this.
|
|
*/
|
|
if (IS_GEN9_LP(dev_priv))
|
|
intel_encoder->pipe_mask = ~0;
|
|
else if (port == PORT_A)
|
|
intel_encoder->pipe_mask = BIT(PIPE_A);
|
|
else
|
|
intel_encoder->pipe_mask = BIT(PIPE_B);
|
|
|
|
if (dev_priv->vbt.dsi.config->dual_link)
|
|
intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C);
|
|
else
|
|
intel_dsi->ports = BIT(port);
|
|
|
|
intel_dsi->dcs_backlight_ports = dev_priv->vbt.dsi.bl_ports;
|
|
intel_dsi->dcs_cabc_ports = dev_priv->vbt.dsi.cabc_ports;
|
|
|
|
/* Create a DSI host (and a device) for each port. */
|
|
for_each_dsi_port(port, intel_dsi->ports) {
|
|
struct intel_dsi_host *host;
|
|
|
|
host = intel_dsi_host_init(intel_dsi, &intel_dsi_host_ops,
|
|
port);
|
|
if (!host)
|
|
goto err;
|
|
|
|
intel_dsi->dsi_hosts[port] = host;
|
|
}
|
|
|
|
if (!intel_dsi_vbt_init(intel_dsi, MIPI_DSI_GENERIC_PANEL_ID)) {
|
|
DRM_DEBUG_KMS("no device found\n");
|
|
goto err;
|
|
}
|
|
|
|
/* Use clock read-back from current hw-state for fastboot */
|
|
current_mode = intel_encoder_current_mode(intel_encoder);
|
|
if (current_mode) {
|
|
DRM_DEBUG_KMS("Calculated pclk %d GOP %d\n",
|
|
intel_dsi->pclk, current_mode->clock);
|
|
if (intel_fuzzy_clock_check(intel_dsi->pclk,
|
|
current_mode->clock)) {
|
|
DRM_DEBUG_KMS("Using GOP pclk\n");
|
|
intel_dsi->pclk = current_mode->clock;
|
|
}
|
|
|
|
kfree(current_mode);
|
|
}
|
|
|
|
vlv_dphy_param_init(intel_dsi);
|
|
|
|
/*
|
|
* In case of BYT with CRC PMIC, we need to use GPIO for
|
|
* Panel control.
|
|
*/
|
|
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
|
|
(dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC)) {
|
|
intel_dsi->gpio_panel =
|
|
gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH);
|
|
|
|
if (IS_ERR(intel_dsi->gpio_panel)) {
|
|
DRM_ERROR("Failed to own gpio for panel control\n");
|
|
intel_dsi->gpio_panel = NULL;
|
|
}
|
|
}
|
|
|
|
drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs);
|
|
|
|
connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/
|
|
connector->interlace_allowed = false;
|
|
connector->doublescan_allowed = false;
|
|
|
|
intel_connector_attach_encoder(intel_connector, intel_encoder);
|
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
fixed_mode = intel_panel_vbt_fixed_mode(intel_connector);
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
|
|
if (!fixed_mode) {
|
|
DRM_DEBUG_KMS("no fixed mode\n");
|
|
goto err_cleanup_connector;
|
|
}
|
|
|
|
intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
|
|
intel_panel_setup_backlight(connector, INVALID_PIPE);
|
|
|
|
vlv_dsi_add_properties(intel_connector);
|
|
|
|
return;
|
|
|
|
err_cleanup_connector:
|
|
drm_connector_cleanup(&intel_connector->base);
|
|
err:
|
|
drm_encoder_cleanup(&intel_encoder->base);
|
|
kfree(intel_dsi);
|
|
kfree(intel_connector);
|
|
}
|