mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 02:39:48 +00:00
![Andrew Morton](/assets/img/avatar_default.png)
Use the correct type for the CPU flags. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2943 lines
81 KiB
C
2943 lines
81 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
|
|
*/
|
|
|
|
|
|
/*
|
|
* This file contains a module version of the ioc4 serial driver. This
|
|
* includes all the support functions needed (support functions, etc.)
|
|
* and the serial driver itself.
|
|
*/
|
|
#include <linux/errno.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serialP.h>
|
|
#include <linux/circ_buf.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ioc4.h>
|
|
#include <linux/serial_core.h>
|
|
|
|
/*
|
|
* interesting things about the ioc4
|
|
*/
|
|
|
|
#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */
|
|
#define IOC4_NUM_CARDS 8 /* max cards per partition */
|
|
|
|
#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \
|
|
(_n == 1) ? (IOC4_SIO_IR_S1) : \
|
|
(_n == 2) ? (IOC4_SIO_IR_S2) : \
|
|
(IOC4_SIO_IR_S3)
|
|
|
|
#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \
|
|
(_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \
|
|
(_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \
|
|
(IOC4_OTHER_IR_S3_MEMERR)
|
|
|
|
|
|
/*
|
|
* All IOC4 registers are 32 bits wide.
|
|
*/
|
|
|
|
/*
|
|
* PCI Memory Space Map
|
|
*/
|
|
#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */
|
|
#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0)
|
|
#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1)
|
|
#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1)
|
|
#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1)
|
|
#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5)
|
|
#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6)
|
|
|
|
/* Interrupt types */
|
|
#define IOC4_SIO_INTR_TYPE 0
|
|
#define IOC4_OTHER_INTR_TYPE 1
|
|
#define IOC4_NUM_INTR_TYPES 2
|
|
|
|
/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */
|
|
#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */
|
|
#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */
|
|
#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */
|
|
#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */
|
|
#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */
|
|
#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */
|
|
#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */
|
|
#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */
|
|
#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */
|
|
#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */
|
|
#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */
|
|
#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */
|
|
#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */
|
|
#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */
|
|
#define IOC4_SIO_IR_S1_INT 0x00004000 /* */
|
|
#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */
|
|
#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */
|
|
#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */
|
|
#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */
|
|
#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */
|
|
#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */
|
|
#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */
|
|
#define IOC4_SIO_IR_S2_INT 0x00400000 /* */
|
|
#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */
|
|
#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */
|
|
#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */
|
|
#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */
|
|
#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */
|
|
#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */
|
|
#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */
|
|
#define IOC4_SIO_IR_S3_INT 0x40000000 /* */
|
|
#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */
|
|
|
|
/* Per device interrupt masks */
|
|
#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \
|
|
IOC4_SIO_IR_S0_RX_FULL | \
|
|
IOC4_SIO_IR_S0_RX_HIGH | \
|
|
IOC4_SIO_IR_S0_RX_TIMER | \
|
|
IOC4_SIO_IR_S0_DELTA_DCD | \
|
|
IOC4_SIO_IR_S0_DELTA_CTS | \
|
|
IOC4_SIO_IR_S0_INT | \
|
|
IOC4_SIO_IR_S0_TX_EXPLICIT)
|
|
#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \
|
|
IOC4_SIO_IR_S1_RX_FULL | \
|
|
IOC4_SIO_IR_S1_RX_HIGH | \
|
|
IOC4_SIO_IR_S1_RX_TIMER | \
|
|
IOC4_SIO_IR_S1_DELTA_DCD | \
|
|
IOC4_SIO_IR_S1_DELTA_CTS | \
|
|
IOC4_SIO_IR_S1_INT | \
|
|
IOC4_SIO_IR_S1_TX_EXPLICIT)
|
|
#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \
|
|
IOC4_SIO_IR_S2_RX_FULL | \
|
|
IOC4_SIO_IR_S2_RX_HIGH | \
|
|
IOC4_SIO_IR_S2_RX_TIMER | \
|
|
IOC4_SIO_IR_S2_DELTA_DCD | \
|
|
IOC4_SIO_IR_S2_DELTA_CTS | \
|
|
IOC4_SIO_IR_S2_INT | \
|
|
IOC4_SIO_IR_S2_TX_EXPLICIT)
|
|
#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \
|
|
IOC4_SIO_IR_S3_RX_FULL | \
|
|
IOC4_SIO_IR_S3_RX_HIGH | \
|
|
IOC4_SIO_IR_S3_RX_TIMER | \
|
|
IOC4_SIO_IR_S3_DELTA_DCD | \
|
|
IOC4_SIO_IR_S3_DELTA_CTS | \
|
|
IOC4_SIO_IR_S3_INT | \
|
|
IOC4_SIO_IR_S3_TX_EXPLICIT)
|
|
|
|
/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
|
|
#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
|
|
#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
|
|
#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
|
|
#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
|
|
#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
|
|
#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
|
|
#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */
|
|
#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */
|
|
#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */
|
|
#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */
|
|
|
|
#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \
|
|
IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR)
|
|
|
|
/* Bitmasks for IOC4_SIO_CR */
|
|
#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */
|
|
#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000
|
|
#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010
|
|
#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020
|
|
#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030
|
|
#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040
|
|
#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050
|
|
#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060
|
|
#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070
|
|
#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among
|
|
serial ports (ro) */
|
|
/* Defs for some of the generic I/O pins */
|
|
#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0
|
|
mode sel */
|
|
#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1
|
|
mode sel */
|
|
#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2
|
|
mode sel */
|
|
#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3
|
|
mode sel */
|
|
|
|
#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling
|
|
uart 0 mode select */
|
|
#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling
|
|
uart 1 mode select */
|
|
#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling
|
|
uart 2 mode select */
|
|
#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling
|
|
uart 3 mode select */
|
|
|
|
/* Bitmasks for serial RX status byte */
|
|
#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */
|
|
#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */
|
|
#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */
|
|
#define IOC4_RXSB_BREAK 0x08 /* Break character */
|
|
#define IOC4_RXSB_CTS 0x10 /* State of CTS */
|
|
#define IOC4_RXSB_DCD 0x20 /* State of DCD */
|
|
#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */
|
|
#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR
|
|
* & BREAK valid */
|
|
|
|
/* Bitmasks for serial TX control byte */
|
|
#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */
|
|
#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */
|
|
#define IOC4_TXCB_VALID 0x40 /* Byte is valid */
|
|
#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */
|
|
#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */
|
|
|
|
/* Bitmasks for IOC4_SBBR_L */
|
|
#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
|
|
|
|
/* Bitmasks for IOC4_SSCR_<3:0> */
|
|
#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */
|
|
#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
|
|
#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */
|
|
#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */
|
|
#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */
|
|
#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */
|
|
#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */
|
|
#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */
|
|
#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */
|
|
#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */
|
|
#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */
|
|
|
|
/* All producer/comsumer pointers are the same bitfield */
|
|
#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */
|
|
#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */
|
|
#define IOC4_PROD_CONS_PTR_OFF 3
|
|
|
|
/* Bitmasks for IOC4_SRCIR_<3:0> */
|
|
#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */
|
|
|
|
/* Bitmasks for IOC4_SHADOW_<3:0> */
|
|
#define IOC4_SHADOW_DR 0x00000001 /* Data ready */
|
|
#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */
|
|
#define IOC4_SHADOW_PE 0x00000004 /* Parity error */
|
|
#define IOC4_SHADOW_FE 0x00000008 /* Framing error */
|
|
#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */
|
|
#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */
|
|
#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */
|
|
#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */
|
|
#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */
|
|
#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */
|
|
#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */
|
|
#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */
|
|
#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */
|
|
#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */
|
|
#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
|
|
#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
|
|
#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */
|
|
|
|
/* Bitmasks for IOC4_SRTR_<3:0> */
|
|
#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */
|
|
#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */
|
|
#define IOC4_SRTR_CNT_VAL_SHIFT 16
|
|
#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */
|
|
|
|
/* Serial port register map used for DMA and PIO serial I/O */
|
|
struct ioc4_serialregs {
|
|
uint32_t sscr;
|
|
uint32_t stpir;
|
|
uint32_t stcir;
|
|
uint32_t srpir;
|
|
uint32_t srcir;
|
|
uint32_t srtr;
|
|
uint32_t shadow;
|
|
};
|
|
|
|
/* IOC4 UART register map */
|
|
struct ioc4_uartregs {
|
|
char i4u_lcr;
|
|
union {
|
|
char iir; /* read only */
|
|
char fcr; /* write only */
|
|
} u3;
|
|
union {
|
|
char ier; /* DLAB == 0 */
|
|
char dlm; /* DLAB == 1 */
|
|
} u2;
|
|
union {
|
|
char rbr; /* read only, DLAB == 0 */
|
|
char thr; /* write only, DLAB == 0 */
|
|
char dll; /* DLAB == 1 */
|
|
} u1;
|
|
char i4u_scr;
|
|
char i4u_msr;
|
|
char i4u_lsr;
|
|
char i4u_mcr;
|
|
};
|
|
|
|
/* short names */
|
|
#define i4u_dll u1.dll
|
|
#define i4u_ier u2.ier
|
|
#define i4u_dlm u2.dlm
|
|
#define i4u_fcr u3.fcr
|
|
|
|
/* Serial port registers used for DMA serial I/O */
|
|
struct ioc4_serial {
|
|
uint32_t sbbr01_l;
|
|
uint32_t sbbr01_h;
|
|
uint32_t sbbr23_l;
|
|
uint32_t sbbr23_h;
|
|
|
|
struct ioc4_serialregs port_0;
|
|
struct ioc4_serialregs port_1;
|
|
struct ioc4_serialregs port_2;
|
|
struct ioc4_serialregs port_3;
|
|
struct ioc4_uartregs uart_0;
|
|
struct ioc4_uartregs uart_1;
|
|
struct ioc4_uartregs uart_2;
|
|
struct ioc4_uartregs uart_3;
|
|
} ioc4_serial;
|
|
|
|
/* UART clock speed */
|
|
#define IOC4_SER_XIN_CLK_66 66666667
|
|
#define IOC4_SER_XIN_CLK_33 33333333
|
|
|
|
#define IOC4_W_IES 0
|
|
#define IOC4_W_IEC 1
|
|
|
|
typedef void ioc4_intr_func_f(void *, uint32_t);
|
|
typedef ioc4_intr_func_f *ioc4_intr_func_t;
|
|
|
|
static unsigned int Num_of_ioc4_cards;
|
|
|
|
/* defining this will get you LOTS of great debug info */
|
|
//#define DEBUG_INTERRUPTS
|
|
#define DPRINT_CONFIG(_x...) ;
|
|
//#define DPRINT_CONFIG(_x...) printk _x
|
|
|
|
/* number of characters left in xmit buffer before we ask for more */
|
|
#define WAKEUP_CHARS 256
|
|
|
|
/* number of characters we want to transmit to the lower level at a time */
|
|
#define IOC4_MAX_CHARS 256
|
|
#define IOC4_FIFO_CHARS 255
|
|
|
|
/* Device name we're using */
|
|
#define DEVICE_NAME_RS232 "ttyIOC"
|
|
#define DEVICE_NAME_RS422 "ttyAIOC"
|
|
#define DEVICE_MAJOR 204
|
|
#define DEVICE_MINOR_RS232 50
|
|
#define DEVICE_MINOR_RS422 84
|
|
|
|
|
|
/* register offsets */
|
|
#define IOC4_SERIAL_OFFSET 0x300
|
|
|
|
/* flags for next_char_state */
|
|
#define NCS_BREAK 0x1
|
|
#define NCS_PARITY 0x2
|
|
#define NCS_FRAMING 0x4
|
|
#define NCS_OVERRUN 0x8
|
|
|
|
/* cause we need SOME parameters ... */
|
|
#define MIN_BAUD_SUPPORTED 1200
|
|
#define MAX_BAUD_SUPPORTED 115200
|
|
|
|
/* protocol types supported */
|
|
#define PROTO_RS232 3
|
|
#define PROTO_RS422 7
|
|
|
|
/* Notification types */
|
|
#define N_DATA_READY 0x01
|
|
#define N_OUTPUT_LOWAT 0x02
|
|
#define N_BREAK 0x04
|
|
#define N_PARITY_ERROR 0x08
|
|
#define N_FRAMING_ERROR 0x10
|
|
#define N_OVERRUN_ERROR 0x20
|
|
#define N_DDCD 0x40
|
|
#define N_DCTS 0x80
|
|
|
|
#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \
|
|
N_PARITY_ERROR | N_FRAMING_ERROR | \
|
|
N_OVERRUN_ERROR | N_DDCD | N_DCTS)
|
|
|
|
#define N_ALL_OUTPUT N_OUTPUT_LOWAT
|
|
|
|
#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR)
|
|
|
|
#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \
|
|
N_PARITY_ERROR | N_FRAMING_ERROR | \
|
|
N_OVERRUN_ERROR | N_DDCD | N_DCTS)
|
|
|
|
#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16))
|
|
#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div))
|
|
|
|
/* Some masks */
|
|
#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \
|
|
| UART_LCR_WLEN7 | UART_LCR_WLEN8)
|
|
#define LCR_MASK_STOP_BITS (UART_LCR_STOP)
|
|
|
|
#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb)
|
|
#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw)
|
|
|
|
/* Default to 4k buffers */
|
|
#ifdef IOC4_1K_BUFFERS
|
|
#define RING_BUF_SIZE 1024
|
|
#define IOC4_BUF_SIZE_BIT 0
|
|
#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K
|
|
#else
|
|
#define RING_BUF_SIZE 4096
|
|
#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE
|
|
#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K
|
|
#endif
|
|
|
|
#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4)
|
|
|
|
/*
|
|
* This is the entry saved by the driver - one per card
|
|
*/
|
|
|
|
#define UART_PORT_MIN 0
|
|
#define UART_PORT_RS232 UART_PORT_MIN
|
|
#define UART_PORT_RS422 1
|
|
#define UART_PORT_COUNT 2 /* one for each mode */
|
|
|
|
struct ioc4_control {
|
|
int ic_irq;
|
|
struct {
|
|
/* uart ports are allocated here - 1 for rs232, 1 for rs422 */
|
|
struct uart_port icp_uart_port[UART_PORT_COUNT];
|
|
/* Handy reference material */
|
|
struct ioc4_port *icp_port;
|
|
} ic_port[IOC4_NUM_SERIAL_PORTS];
|
|
struct ioc4_soft *ic_soft;
|
|
};
|
|
|
|
/*
|
|
* per-IOC4 data structure
|
|
*/
|
|
#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t))
|
|
struct ioc4_soft {
|
|
struct ioc4_misc_regs __iomem *is_ioc4_misc_addr;
|
|
struct ioc4_serial __iomem *is_ioc4_serial_addr;
|
|
|
|
/* Each interrupt type has an entry in the array */
|
|
struct ioc4_intr_type {
|
|
|
|
/*
|
|
* Each in-use entry in this array contains at least
|
|
* one nonzero bit in sd_bits; no two entries in this
|
|
* array have overlapping sd_bits values.
|
|
*/
|
|
struct ioc4_intr_info {
|
|
uint32_t sd_bits;
|
|
ioc4_intr_func_f *sd_intr;
|
|
void *sd_info;
|
|
} is_intr_info[MAX_IOC4_INTR_ENTS];
|
|
|
|
/* Number of entries active in the above array */
|
|
atomic_t is_num_intrs;
|
|
} is_intr_type[IOC4_NUM_INTR_TYPES];
|
|
|
|
/* is_ir_lock must be held while
|
|
* modifying sio_ie values, so
|
|
* we can be sure that sio_ie is
|
|
* not changing when we read it
|
|
* along with sio_ir.
|
|
*/
|
|
spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */
|
|
};
|
|
|
|
/* Local port info for each IOC4 serial ports */
|
|
struct ioc4_port {
|
|
struct uart_port *ip_port; /* current active port ptr */
|
|
/* Ptrs for all ports */
|
|
struct uart_port *ip_all_ports[UART_PORT_COUNT];
|
|
/* Back ptrs for this port */
|
|
struct ioc4_control *ip_control;
|
|
struct pci_dev *ip_pdev;
|
|
struct ioc4_soft *ip_ioc4_soft;
|
|
|
|
/* pci mem addresses */
|
|
struct ioc4_misc_regs __iomem *ip_mem;
|
|
struct ioc4_serial __iomem *ip_serial;
|
|
struct ioc4_serialregs __iomem *ip_serial_regs;
|
|
struct ioc4_uartregs __iomem *ip_uart_regs;
|
|
|
|
/* Ring buffer page for this port */
|
|
dma_addr_t ip_dma_ringbuf;
|
|
/* vaddr of ring buffer */
|
|
struct ring_buffer *ip_cpu_ringbuf;
|
|
|
|
/* Rings for this port */
|
|
struct ring *ip_inring;
|
|
struct ring *ip_outring;
|
|
|
|
/* Hook to port specific values */
|
|
struct hooks *ip_hooks;
|
|
|
|
spinlock_t ip_lock;
|
|
|
|
/* Various rx/tx parameters */
|
|
int ip_baud;
|
|
int ip_tx_lowat;
|
|
int ip_rx_timeout;
|
|
|
|
/* Copy of notification bits */
|
|
int ip_notify;
|
|
|
|
/* Shadow copies of various registers so we don't need to PIO
|
|
* read them constantly
|
|
*/
|
|
uint32_t ip_ienb; /* Enabled interrupts */
|
|
uint32_t ip_sscr;
|
|
uint32_t ip_tx_prod;
|
|
uint32_t ip_rx_cons;
|
|
int ip_pci_bus_speed;
|
|
unsigned char ip_flags;
|
|
};
|
|
|
|
/* tx low water mark. We need to notify the driver whenever tx is getting
|
|
* close to empty so it can refill the tx buffer and keep things going.
|
|
* Let's assume that if we interrupt 1 ms before the tx goes idle, we'll
|
|
* have no trouble getting in more chars in time (I certainly hope so).
|
|
*/
|
|
#define TX_LOWAT_LATENCY 1000
|
|
#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY)
|
|
#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
|
|
|
|
/* Flags per port */
|
|
#define INPUT_HIGH 0x01
|
|
#define DCD_ON 0x02
|
|
#define LOWAT_WRITTEN 0x04
|
|
#define READ_ABORTED 0x08
|
|
#define PORT_ACTIVE 0x10
|
|
#define PORT_INACTIVE 0 /* This is the value when "off" */
|
|
|
|
|
|
/* Since each port has different register offsets and bitmasks
|
|
* for everything, we'll store those that we need in tables so we
|
|
* don't have to be constantly checking the port we are dealing with.
|
|
*/
|
|
struct hooks {
|
|
uint32_t intr_delta_dcd;
|
|
uint32_t intr_delta_cts;
|
|
uint32_t intr_tx_mt;
|
|
uint32_t intr_rx_timer;
|
|
uint32_t intr_rx_high;
|
|
uint32_t intr_tx_explicit;
|
|
uint32_t intr_dma_error;
|
|
uint32_t intr_clear;
|
|
uint32_t intr_all;
|
|
int rs422_select_pin;
|
|
};
|
|
|
|
static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = {
|
|
/* Values for port 0 */
|
|
{
|
|
IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS,
|
|
IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER,
|
|
IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT,
|
|
IOC4_OTHER_IR_S0_MEMERR,
|
|
(IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL |
|
|
IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER |
|
|
IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS |
|
|
IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT),
|
|
IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN,
|
|
},
|
|
|
|
/* Values for port 1 */
|
|
{
|
|
IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS,
|
|
IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER,
|
|
IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT,
|
|
IOC4_OTHER_IR_S1_MEMERR,
|
|
(IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL |
|
|
IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER |
|
|
IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS |
|
|
IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT),
|
|
IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN,
|
|
},
|
|
|
|
/* Values for port 2 */
|
|
{
|
|
IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS,
|
|
IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER,
|
|
IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT,
|
|
IOC4_OTHER_IR_S2_MEMERR,
|
|
(IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL |
|
|
IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER |
|
|
IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS |
|
|
IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT),
|
|
IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN,
|
|
},
|
|
|
|
/* Values for port 3 */
|
|
{
|
|
IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS,
|
|
IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER,
|
|
IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT,
|
|
IOC4_OTHER_IR_S3_MEMERR,
|
|
(IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL |
|
|
IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER |
|
|
IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS |
|
|
IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT),
|
|
IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN,
|
|
}
|
|
};
|
|
|
|
/* A ring buffer entry */
|
|
struct ring_entry {
|
|
union {
|
|
struct {
|
|
uint32_t alldata;
|
|
uint32_t allsc;
|
|
} all;
|
|
struct {
|
|
char data[4]; /* data bytes */
|
|
char sc[4]; /* status/control */
|
|
} s;
|
|
} u;
|
|
};
|
|
|
|
/* Test the valid bits in any of the 4 sc chars using "allsc" member */
|
|
#define RING_ANY_VALID \
|
|
((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101)
|
|
|
|
#define ring_sc u.s.sc
|
|
#define ring_data u.s.data
|
|
#define ring_allsc u.all.allsc
|
|
|
|
/* Number of entries per ring buffer. */
|
|
#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry))
|
|
|
|
/* An individual ring */
|
|
struct ring {
|
|
struct ring_entry entries[ENTRIES_PER_RING];
|
|
};
|
|
|
|
/* The whole enchilada */
|
|
struct ring_buffer {
|
|
struct ring TX_0_OR_2;
|
|
struct ring RX_0_OR_2;
|
|
struct ring TX_1_OR_3;
|
|
struct ring RX_1_OR_3;
|
|
};
|
|
|
|
/* Get a ring from a port struct */
|
|
#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh)
|
|
|
|
/* Infinite loop detection.
|
|
*/
|
|
#define MAXITER 10000000
|
|
|
|
/* Prototypes */
|
|
static void receive_chars(struct uart_port *);
|
|
static void handle_intr(void *arg, uint32_t sio_ir);
|
|
|
|
/*
|
|
* port_is_active - determines if this port is currently active
|
|
* @port: ptr to soft struct for this port
|
|
* @uart_port: uart port to test for
|
|
*/
|
|
static inline int port_is_active(struct ioc4_port *port,
|
|
struct uart_port *uart_port)
|
|
{
|
|
if (port) {
|
|
if ((port->ip_flags & PORT_ACTIVE)
|
|
&& (port->ip_port == uart_port))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* write_ireg - write the interrupt regs
|
|
* @ioc4_soft: ptr to soft struct for this port
|
|
* @val: value to write
|
|
* @which: which register
|
|
* @type: which ireg set
|
|
*/
|
|
static inline void
|
|
write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
|
|
{
|
|
struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags);
|
|
|
|
switch (type) {
|
|
case IOC4_SIO_INTR_TYPE:
|
|
switch (which) {
|
|
case IOC4_W_IES:
|
|
writel(val, &mem->sio_ies.raw);
|
|
break;
|
|
|
|
case IOC4_W_IEC:
|
|
writel(val, &mem->sio_iec.raw);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case IOC4_OTHER_INTR_TYPE:
|
|
switch (which) {
|
|
case IOC4_W_IES:
|
|
writel(val, &mem->other_ies.raw);
|
|
break;
|
|
|
|
case IOC4_W_IEC:
|
|
writel(val, &mem->other_iec.raw);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* set_baud - Baud rate setting code
|
|
* @port: port to set
|
|
* @baud: baud rate to use
|
|
*/
|
|
static int set_baud(struct ioc4_port *port, int baud)
|
|
{
|
|
int actual_baud;
|
|
int diff;
|
|
int lcr;
|
|
unsigned short divisor;
|
|
struct ioc4_uartregs __iomem *uart;
|
|
|
|
divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed);
|
|
if (!divisor)
|
|
return 1;
|
|
actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed);
|
|
|
|
diff = actual_baud - baud;
|
|
if (diff < 0)
|
|
diff = -diff;
|
|
|
|
/* If we're within 1%, we've found a match */
|
|
if (diff * 100 > actual_baud)
|
|
return 1;
|
|
|
|
uart = port->ip_uart_regs;
|
|
lcr = readb(&uart->i4u_lcr);
|
|
writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr);
|
|
writeb((unsigned char)divisor, &uart->i4u_dll);
|
|
writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm);
|
|
writeb(lcr, &uart->i4u_lcr);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* get_ioc4_port - given a uart port, return the control structure
|
|
* @port: uart port
|
|
* @set: set this port as current
|
|
*/
|
|
static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set)
|
|
{
|
|
struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev);
|
|
struct ioc4_control *control = idd->idd_serial_data;
|
|
struct ioc4_port *port;
|
|
int port_num, port_type;
|
|
|
|
if (control) {
|
|
for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS;
|
|
port_num++ ) {
|
|
port = control->ic_port[port_num].icp_port;
|
|
if (!port)
|
|
continue;
|
|
for (port_type = UART_PORT_MIN;
|
|
port_type < UART_PORT_COUNT;
|
|
port_type++) {
|
|
if (the_port == port->ip_all_ports
|
|
[port_type]) {
|
|
/* set local copy */
|
|
if (set) {
|
|
port->ip_port = the_port;
|
|
}
|
|
return port;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/* The IOC4 hardware provides no atomic way to determine if interrupts
|
|
* are pending since two reads are required to do so. The handler must
|
|
* read the SIO_IR and the SIO_IES, and take the logical and of the
|
|
* two. When this value is zero, all interrupts have been serviced and
|
|
* the handler may return.
|
|
*
|
|
* This has the unfortunate "hole" that, if some other CPU or
|
|
* some other thread or some higher level interrupt manages to
|
|
* modify SIO_IE between our reads of SIO_IR and SIO_IE, we may
|
|
* think we have observed SIO_IR&SIO_IE==0 when in fact this
|
|
* condition never really occurred.
|
|
*
|
|
* To solve this, we use a simple spinlock that must be held
|
|
* whenever modifying SIO_IE; holding this lock while observing
|
|
* both SIO_IR and SIO_IE guarantees that we do not falsely
|
|
* conclude that no enabled interrupts are pending.
|
|
*/
|
|
|
|
static inline uint32_t
|
|
pending_intrs(struct ioc4_soft *soft, int type)
|
|
{
|
|
struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
|
|
unsigned long flag;
|
|
uint32_t intrs = 0;
|
|
|
|
BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
|
|
|| (type == IOC4_OTHER_INTR_TYPE)));
|
|
|
|
spin_lock_irqsave(&soft->is_ir_lock, flag);
|
|
|
|
switch (type) {
|
|
case IOC4_SIO_INTR_TYPE:
|
|
intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw);
|
|
break;
|
|
|
|
case IOC4_OTHER_INTR_TYPE:
|
|
intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw);
|
|
|
|
/* Don't process any ATA interrupte */
|
|
intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&soft->is_ir_lock, flag);
|
|
return intrs;
|
|
}
|
|
|
|
/**
|
|
* port_init - Initialize the sio and ioc4 hardware for a given port
|
|
* called per port from attach...
|
|
* @port: port to initialize
|
|
*/
|
|
static int inline port_init(struct ioc4_port *port)
|
|
{
|
|
uint32_t sio_cr;
|
|
struct hooks *hooks = port->ip_hooks;
|
|
struct ioc4_uartregs __iomem *uart;
|
|
|
|
/* Idle the IOC4 serial interface */
|
|
writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr);
|
|
|
|
/* Wait until any pending bus activity for this port has ceased */
|
|
do
|
|
sio_cr = readl(&port->ip_mem->sio_cr.raw);
|
|
while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE));
|
|
|
|
/* Finish reset sequence */
|
|
writel(0, &port->ip_serial_regs->sscr);
|
|
|
|
/* Once RESET is done, reload cached tx_prod and rx_cons values
|
|
* and set rings to empty by making prod == cons
|
|
*/
|
|
port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
|
|
writel(port->ip_tx_prod, &port->ip_serial_regs->stpir);
|
|
port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
|
|
writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
|
|
|
|
/* Disable interrupts for this 16550 */
|
|
uart = port->ip_uart_regs;
|
|
writeb(0, &uart->i4u_lcr);
|
|
writeb(0, &uart->i4u_ier);
|
|
|
|
/* Set the default baud */
|
|
set_baud(port, port->ip_baud);
|
|
|
|
/* Set line control to 8 bits no parity */
|
|
writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr);
|
|
/* UART_LCR_STOP == 1 stop */
|
|
|
|
/* Enable the FIFOs */
|
|
writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr);
|
|
/* then reset 16550 FIFOs */
|
|
writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
|
|
&uart->i4u_fcr);
|
|
|
|
/* Clear modem control register */
|
|
writeb(0, &uart->i4u_mcr);
|
|
|
|
/* Clear deltas in modem status register */
|
|
readb(&uart->i4u_msr);
|
|
|
|
/* Only do this once per port pair */
|
|
if (port->ip_hooks == &hooks_array[0]
|
|
|| port->ip_hooks == &hooks_array[2]) {
|
|
unsigned long ring_pci_addr;
|
|
uint32_t __iomem *sbbr_l;
|
|
uint32_t __iomem *sbbr_h;
|
|
|
|
if (port->ip_hooks == &hooks_array[0]) {
|
|
sbbr_l = &port->ip_serial->sbbr01_l;
|
|
sbbr_h = &port->ip_serial->sbbr01_h;
|
|
} else {
|
|
sbbr_l = &port->ip_serial->sbbr23_l;
|
|
sbbr_h = &port->ip_serial->sbbr23_h;
|
|
}
|
|
|
|
ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
|
|
DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n",
|
|
__FUNCTION__, ring_pci_addr));
|
|
|
|
writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h);
|
|
writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l);
|
|
}
|
|
|
|
/* Set the receive timeout value to 10 msec */
|
|
writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr);
|
|
|
|
/* Set rx threshold, enable DMA */
|
|
/* Set high water mark at 3/4 of full ring */
|
|
port->ip_sscr = (ENTRIES_PER_RING * 3 / 4);
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
|
|
/* Disable and clear all serial related interrupt bits */
|
|
write_ireg(port->ip_ioc4_soft, hooks->intr_clear,
|
|
IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
|
|
port->ip_ienb &= ~hooks->intr_clear;
|
|
writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* handle_dma_error_intr - service any pending DMA error interrupts for the
|
|
* given port - 2nd level called via sd_intr
|
|
* @arg: handler arg
|
|
* @other_ir: ioc4regs
|
|
*/
|
|
static void handle_dma_error_intr(void *arg, uint32_t other_ir)
|
|
{
|
|
struct ioc4_port *port = (struct ioc4_port *)arg;
|
|
struct hooks *hooks = port->ip_hooks;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->ip_lock, flags);
|
|
|
|
/* ACK the interrupt */
|
|
writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw);
|
|
|
|
if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) {
|
|
printk(KERN_ERR
|
|
"PCI error address is 0x%lx, "
|
|
"master is serial port %c %s\n",
|
|
(((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
|
|
<< 32)
|
|
| readl(&port->ip_mem->pci_err_addr_l.raw))
|
|
& IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' +
|
|
((char)(readl(&port->ip_mem->pci_err_addr_l.raw) &
|
|
IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1),
|
|
(readl(&port->ip_mem->pci_err_addr_l.raw)
|
|
& IOC4_PCI_ERR_ADDR_MST_TYP_MSK)
|
|
? "RX" : "TX");
|
|
|
|
if (readl(&port->ip_mem->pci_err_addr_l.raw)
|
|
& IOC4_PCI_ERR_ADDR_MUL_ERR) {
|
|
printk(KERN_ERR
|
|
"Multiple errors occurred\n");
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&port->ip_lock, flags);
|
|
|
|
/* Re-enable DMA error interrupts */
|
|
write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES,
|
|
IOC4_OTHER_INTR_TYPE);
|
|
}
|
|
|
|
/**
|
|
* intr_connect - interrupt connect function
|
|
* @soft: soft struct for this card
|
|
* @type: interrupt type
|
|
* @intrbits: bit pattern to set
|
|
* @intr: handler function
|
|
* @info: handler arg
|
|
*/
|
|
static void
|
|
intr_connect(struct ioc4_soft *soft, int type,
|
|
uint32_t intrbits, ioc4_intr_func_f * intr, void *info)
|
|
{
|
|
int i;
|
|
struct ioc4_intr_info *intr_ptr;
|
|
|
|
BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
|
|
|| (type == IOC4_OTHER_INTR_TYPE)));
|
|
|
|
i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1;
|
|
BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0)));
|
|
|
|
/* Save off the lower level interrupt handler */
|
|
intr_ptr = &soft->is_intr_type[type].is_intr_info[i];
|
|
intr_ptr->sd_bits = intrbits;
|
|
intr_ptr->sd_intr = intr;
|
|
intr_ptr->sd_info = info;
|
|
}
|
|
|
|
/**
|
|
* ioc4_intr - Top level IOC4 interrupt handler.
|
|
* @irq: irq value
|
|
* @arg: handler arg
|
|
*/
|
|
|
|
static irqreturn_t ioc4_intr(int irq, void *arg)
|
|
{
|
|
struct ioc4_soft *soft;
|
|
uint32_t this_ir, this_mir;
|
|
int xx, num_intrs = 0;
|
|
int intr_type;
|
|
int handled = 0;
|
|
struct ioc4_intr_info *intr_info;
|
|
|
|
soft = arg;
|
|
for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) {
|
|
num_intrs = (int)atomic_read(
|
|
&soft->is_intr_type[intr_type].is_num_intrs);
|
|
|
|
this_mir = this_ir = pending_intrs(soft, intr_type);
|
|
|
|
/* Farm out the interrupt to the various drivers depending on
|
|
* which interrupt bits are set.
|
|
*/
|
|
for (xx = 0; xx < num_intrs; xx++) {
|
|
intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx];
|
|
if ((this_mir = this_ir & intr_info->sd_bits)) {
|
|
/* Disable owned interrupts, call handler */
|
|
handled++;
|
|
write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC,
|
|
intr_type);
|
|
intr_info->sd_intr(intr_info->sd_info, this_mir);
|
|
this_ir &= ~this_mir;
|
|
}
|
|
}
|
|
}
|
|
#ifdef DEBUG_INTERRUPTS
|
|
{
|
|
struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
|
|
unsigned long flag;
|
|
|
|
spin_lock_irqsave(&soft->is_ir_lock, flag);
|
|
printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
|
|
"other_ir 0x%x other_ies 0x%x mask 0x%x\n",
|
|
__FUNCTION__, __LINE__,
|
|
(void *)mem, readl(&mem->sio_ir.raw),
|
|
readl(&mem->sio_ies.raw),
|
|
readl(&mem->other_ir.raw),
|
|
readl(&mem->other_ies.raw),
|
|
IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
|
|
spin_unlock_irqrestore(&soft->is_ir_lock, flag);
|
|
}
|
|
#endif
|
|
return handled ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
/**
|
|
* ioc4_attach_local - Device initialization.
|
|
* Called at *_attach() time for each
|
|
* IOC4 with serial ports in the system.
|
|
* @idd: Master module data for this IOC4
|
|
*/
|
|
static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
|
|
{
|
|
struct ioc4_port *port;
|
|
struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS];
|
|
int port_number;
|
|
uint16_t ioc4_revid_min = 62;
|
|
uint16_t ioc4_revid;
|
|
struct pci_dev *pdev = idd->idd_pdev;
|
|
struct ioc4_control* control = idd->idd_serial_data;
|
|
struct ioc4_soft *soft = control->ic_soft;
|
|
void __iomem *ioc4_misc = idd->idd_misc_regs;
|
|
void __iomem *ioc4_serial = soft->is_ioc4_serial_addr;
|
|
|
|
/* IOC4 firmware must be at least rev 62 */
|
|
pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid);
|
|
|
|
printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid);
|
|
if (ioc4_revid < ioc4_revid_min) {
|
|
printk(KERN_WARNING
|
|
"IOC4 serial not supported on firmware rev %d, "
|
|
"please upgrade to rev %d or higher\n",
|
|
ioc4_revid, ioc4_revid_min);
|
|
return -EPERM;
|
|
}
|
|
BUG_ON(ioc4_misc == NULL);
|
|
BUG_ON(ioc4_serial == NULL);
|
|
|
|
/* Create port structures for each port */
|
|
for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS;
|
|
port_number++) {
|
|
port = kmalloc(sizeof(struct ioc4_port), GFP_KERNEL);
|
|
if (!port) {
|
|
printk(KERN_WARNING
|
|
"IOC4 serial memory not available for port\n");
|
|
return -ENOMEM;
|
|
}
|
|
memset(port, 0, sizeof(struct ioc4_port));
|
|
spin_lock_init(&port->ip_lock);
|
|
|
|
/* we need to remember the previous ones, to point back to
|
|
* them farther down - setting up the ring buffers.
|
|
*/
|
|
ports[port_number] = port;
|
|
|
|
/* Allocate buffers and jumpstart the hardware. */
|
|
control->ic_port[port_number].icp_port = port;
|
|
port->ip_ioc4_soft = soft;
|
|
port->ip_pdev = pdev;
|
|
port->ip_ienb = 0;
|
|
/* Use baud rate calculations based on detected PCI
|
|
* bus speed. Simply test whether the PCI clock is
|
|
* running closer to 66MHz or 33MHz.
|
|
*/
|
|
if (idd->count_period/IOC4_EXTINT_COUNT_DIVISOR < 20) {
|
|
port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_66;
|
|
} else {
|
|
port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_33;
|
|
}
|
|
port->ip_baud = 9600;
|
|
port->ip_control = control;
|
|
port->ip_mem = ioc4_misc;
|
|
port->ip_serial = ioc4_serial;
|
|
|
|
/* point to the right hook */
|
|
port->ip_hooks = &hooks_array[port_number];
|
|
|
|
/* Get direct hooks to the serial regs and uart regs
|
|
* for this port
|
|
*/
|
|
switch (port_number) {
|
|
case 0:
|
|
port->ip_serial_regs = &(port->ip_serial->port_0);
|
|
port->ip_uart_regs = &(port->ip_serial->uart_0);
|
|
break;
|
|
case 1:
|
|
port->ip_serial_regs = &(port->ip_serial->port_1);
|
|
port->ip_uart_regs = &(port->ip_serial->uart_1);
|
|
break;
|
|
case 2:
|
|
port->ip_serial_regs = &(port->ip_serial->port_2);
|
|
port->ip_uart_regs = &(port->ip_serial->uart_2);
|
|
break;
|
|
default:
|
|
case 3:
|
|
port->ip_serial_regs = &(port->ip_serial->port_3);
|
|
port->ip_uart_regs = &(port->ip_serial->uart_3);
|
|
break;
|
|
}
|
|
|
|
/* ring buffers are 1 to a pair of ports */
|
|
if (port_number && (port_number & 1)) {
|
|
/* odd use the evens buffer */
|
|
port->ip_dma_ringbuf =
|
|
ports[port_number - 1]->ip_dma_ringbuf;
|
|
port->ip_cpu_ringbuf =
|
|
ports[port_number - 1]->ip_cpu_ringbuf;
|
|
port->ip_inring = RING(port, RX_1_OR_3);
|
|
port->ip_outring = RING(port, TX_1_OR_3);
|
|
|
|
} else {
|
|
if (port->ip_dma_ringbuf == 0) {
|
|
port->ip_cpu_ringbuf = pci_alloc_consistent
|
|
(pdev, TOTAL_RING_BUF_SIZE,
|
|
&port->ip_dma_ringbuf);
|
|
|
|
}
|
|
BUG_ON(!((((int64_t)port->ip_dma_ringbuf) &
|
|
(TOTAL_RING_BUF_SIZE - 1)) == 0));
|
|
DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p "
|
|
"ip_dma_ringbuf 0x%p\n",
|
|
__FUNCTION__,
|
|
(void *)port->ip_cpu_ringbuf,
|
|
(void *)port->ip_dma_ringbuf));
|
|
port->ip_inring = RING(port, RX_0_OR_2);
|
|
port->ip_outring = RING(port, TX_0_OR_2);
|
|
}
|
|
DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p",
|
|
__FUNCTION__,
|
|
port_number, (void *)port, (void *)control));
|
|
DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
|
|
(void *)port->ip_serial_regs,
|
|
(void *)port->ip_uart_regs));
|
|
|
|
/* Initialize the hardware for IOC4 */
|
|
port_init(port);
|
|
|
|
DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p "
|
|
"outring 0x%p\n",
|
|
__FUNCTION__,
|
|
port_number, (void *)port,
|
|
(void *)port->ip_inring,
|
|
(void *)port->ip_outring));
|
|
|
|
/* Attach interrupt handlers */
|
|
intr_connect(soft, IOC4_SIO_INTR_TYPE,
|
|
GET_SIO_IR(port_number),
|
|
handle_intr, port);
|
|
|
|
intr_connect(soft, IOC4_OTHER_INTR_TYPE,
|
|
GET_OTHER_IR(port_number),
|
|
handle_dma_error_intr, port);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* enable_intrs - enable interrupts
|
|
* @port: port to enable
|
|
* @mask: mask to use
|
|
*/
|
|
static void enable_intrs(struct ioc4_port *port, uint32_t mask)
|
|
{
|
|
struct hooks *hooks = port->ip_hooks;
|
|
|
|
if ((port->ip_ienb & mask) != mask) {
|
|
write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES,
|
|
IOC4_SIO_INTR_TYPE);
|
|
port->ip_ienb |= mask;
|
|
}
|
|
|
|
if (port->ip_ienb)
|
|
write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
|
|
IOC4_W_IES, IOC4_OTHER_INTR_TYPE);
|
|
}
|
|
|
|
/**
|
|
* local_open - local open a port
|
|
* @port: port to open
|
|
*/
|
|
static inline int local_open(struct ioc4_port *port)
|
|
{
|
|
int spiniter = 0;
|
|
|
|
port->ip_flags = PORT_ACTIVE;
|
|
|
|
/* Pause the DMA interface if necessary */
|
|
if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
|
|
writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
|
|
&port->ip_serial_regs->sscr);
|
|
while((readl(&port->ip_serial_regs-> sscr)
|
|
& IOC4_SSCR_PAUSE_STATE) == 0) {
|
|
spiniter++;
|
|
if (spiniter > MAXITER) {
|
|
port->ip_flags = PORT_INACTIVE;
|
|
return -1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Reset the input fifo. If the uart received chars while the port
|
|
* was closed and DMA is not enabled, the uart may have a bunch of
|
|
* chars hanging around in its rx fifo which will not be discarded
|
|
* by rclr in the upper layer. We must get rid of them here.
|
|
*/
|
|
writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR,
|
|
&port->ip_uart_regs->i4u_fcr);
|
|
|
|
writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr);
|
|
/* UART_LCR_STOP == 1 stop */
|
|
|
|
/* Re-enable DMA, set default threshold to intr whenever there is
|
|
* data available.
|
|
*/
|
|
port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
|
|
port->ip_sscr |= 1; /* default threshold */
|
|
|
|
/* Plug in the new sscr. This implicitly clears the DMA_PAUSE
|
|
* flag if it was set above
|
|
*/
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
port->ip_tx_lowat = 1;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* set_rx_timeout - Set rx timeout and threshold values.
|
|
* @port: port to use
|
|
* @timeout: timeout value in ticks
|
|
*/
|
|
static inline int set_rx_timeout(struct ioc4_port *port, int timeout)
|
|
{
|
|
int threshold;
|
|
|
|
port->ip_rx_timeout = timeout;
|
|
|
|
/* Timeout is in ticks. Let's figure out how many chars we
|
|
* can receive at the current baud rate in that interval
|
|
* and set the rx threshold to that amount. There are 4 chars
|
|
* per ring entry, so we'll divide the number of chars that will
|
|
* arrive in timeout by 4.
|
|
* So .... timeout * baud / 10 / HZ / 4, with HZ = 100.
|
|
*/
|
|
threshold = timeout * port->ip_baud / 4000;
|
|
if (threshold == 0)
|
|
threshold = 1; /* otherwise we'll intr all the time! */
|
|
|
|
if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD)
|
|
return 1;
|
|
|
|
port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
|
|
port->ip_sscr |= threshold;
|
|
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
|
|
/* Now set the rx timeout to the given value
|
|
* again timeout * IOC4_SRTR_HZ / HZ
|
|
*/
|
|
timeout = timeout * IOC4_SRTR_HZ / 100;
|
|
if (timeout > IOC4_SRTR_CNT)
|
|
timeout = IOC4_SRTR_CNT;
|
|
|
|
writel(timeout, &port->ip_serial_regs->srtr);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* config_port - config the hardware
|
|
* @port: port to config
|
|
* @baud: baud rate for the port
|
|
* @byte_size: data size
|
|
* @stop_bits: number of stop bits
|
|
* @parenb: parity enable ?
|
|
* @parodd: odd parity ?
|
|
*/
|
|
static inline int
|
|
config_port(struct ioc4_port *port,
|
|
int baud, int byte_size, int stop_bits, int parenb, int parodd)
|
|
{
|
|
char lcr, sizebits;
|
|
int spiniter = 0;
|
|
|
|
DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n",
|
|
__FUNCTION__, baud, byte_size, stop_bits, parenb, parodd));
|
|
|
|
if (set_baud(port, baud))
|
|
return 1;
|
|
|
|
switch (byte_size) {
|
|
case 5:
|
|
sizebits = UART_LCR_WLEN5;
|
|
break;
|
|
case 6:
|
|
sizebits = UART_LCR_WLEN6;
|
|
break;
|
|
case 7:
|
|
sizebits = UART_LCR_WLEN7;
|
|
break;
|
|
case 8:
|
|
sizebits = UART_LCR_WLEN8;
|
|
break;
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
/* Pause the DMA interface if necessary */
|
|
if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
|
|
writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
|
|
&port->ip_serial_regs->sscr);
|
|
while((readl(&port->ip_serial_regs->sscr)
|
|
& IOC4_SSCR_PAUSE_STATE) == 0) {
|
|
spiniter++;
|
|
if (spiniter > MAXITER)
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Clear relevant fields in lcr */
|
|
lcr = readb(&port->ip_uart_regs->i4u_lcr);
|
|
lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR |
|
|
UART_LCR_PARITY | LCR_MASK_STOP_BITS);
|
|
|
|
/* Set byte size in lcr */
|
|
lcr |= sizebits;
|
|
|
|
/* Set parity */
|
|
if (parenb) {
|
|
lcr |= UART_LCR_PARITY;
|
|
if (!parodd)
|
|
lcr |= UART_LCR_EPAR;
|
|
}
|
|
|
|
/* Set stop bits */
|
|
if (stop_bits)
|
|
lcr |= UART_LCR_STOP /* 2 stop bits */ ;
|
|
|
|
writeb(lcr, &port->ip_uart_regs->i4u_lcr);
|
|
|
|
/* Re-enable the DMA interface if necessary */
|
|
if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
}
|
|
port->ip_baud = baud;
|
|
|
|
/* When we get within this number of ring entries of filling the
|
|
* entire ring on tx, place an EXPLICIT intr to generate a lowat
|
|
* notification when output has drained.
|
|
*/
|
|
port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
|
|
if (port->ip_tx_lowat == 0)
|
|
port->ip_tx_lowat = 1;
|
|
|
|
set_rx_timeout(port, 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* do_write - Write bytes to the port. Returns the number of bytes
|
|
* actually written. Called from transmit_chars
|
|
* @port: port to use
|
|
* @buf: the stuff to write
|
|
* @len: how many bytes in 'buf'
|
|
*/
|
|
static inline int do_write(struct ioc4_port *port, char *buf, int len)
|
|
{
|
|
int prod_ptr, cons_ptr, total = 0;
|
|
struct ring *outring;
|
|
struct ring_entry *entry;
|
|
struct hooks *hooks = port->ip_hooks;
|
|
|
|
BUG_ON(!(len >= 0));
|
|
|
|
prod_ptr = port->ip_tx_prod;
|
|
cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
|
|
outring = port->ip_outring;
|
|
|
|
/* Maintain a 1-entry red-zone. The ring buffer is full when
|
|
* (cons - prod) % ring_size is 1. Rather than do this subtraction
|
|
* in the body of the loop, I'll do it now.
|
|
*/
|
|
cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK;
|
|
|
|
/* Stuff the bytes into the output */
|
|
while ((prod_ptr != cons_ptr) && (len > 0)) {
|
|
int xx;
|
|
|
|
/* Get 4 bytes (one ring entry) at a time */
|
|
entry = (struct ring_entry *)((caddr_t) outring + prod_ptr);
|
|
|
|
/* Invalidate all entries */
|
|
entry->ring_allsc = 0;
|
|
|
|
/* Copy in some bytes */
|
|
for (xx = 0; (xx < 4) && (len > 0); xx++) {
|
|
entry->ring_data[xx] = *buf++;
|
|
entry->ring_sc[xx] = IOC4_TXCB_VALID;
|
|
len--;
|
|
total++;
|
|
}
|
|
|
|
/* If we are within some small threshold of filling up the
|
|
* entire ring buffer, we must place an EXPLICIT intr here
|
|
* to generate a lowat interrupt in case we subsequently
|
|
* really do fill up the ring and the caller goes to sleep.
|
|
* No need to place more than one though.
|
|
*/
|
|
if (!(port->ip_flags & LOWAT_WRITTEN) &&
|
|
((cons_ptr - prod_ptr) & PROD_CONS_MASK)
|
|
<= port->ip_tx_lowat
|
|
* (int)sizeof(struct ring_entry)) {
|
|
port->ip_flags |= LOWAT_WRITTEN;
|
|
entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE;
|
|
}
|
|
|
|
/* Go on to next entry */
|
|
prod_ptr += sizeof(struct ring_entry);
|
|
prod_ptr &= PROD_CONS_MASK;
|
|
}
|
|
|
|
/* If we sent something, start DMA if necessary */
|
|
if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
|
|
port->ip_sscr |= IOC4_SSCR_DMA_EN;
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
}
|
|
|
|
/* Store the new producer pointer. If tx is disabled, we stuff the
|
|
* data into the ring buffer, but we don't actually start tx.
|
|
*/
|
|
if (!uart_tx_stopped(port->ip_port)) {
|
|
writel(prod_ptr, &port->ip_serial_regs->stpir);
|
|
|
|
/* If we are now transmitting, enable tx_mt interrupt so we
|
|
* can disable DMA if necessary when the tx finishes.
|
|
*/
|
|
if (total > 0)
|
|
enable_intrs(port, hooks->intr_tx_mt);
|
|
}
|
|
port->ip_tx_prod = prod_ptr;
|
|
return total;
|
|
}
|
|
|
|
/**
|
|
* disable_intrs - disable interrupts
|
|
* @port: port to enable
|
|
* @mask: mask to use
|
|
*/
|
|
static void disable_intrs(struct ioc4_port *port, uint32_t mask)
|
|
{
|
|
struct hooks *hooks = port->ip_hooks;
|
|
|
|
if (port->ip_ienb & mask) {
|
|
write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC,
|
|
IOC4_SIO_INTR_TYPE);
|
|
port->ip_ienb &= ~mask;
|
|
}
|
|
|
|
if (!port->ip_ienb)
|
|
write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
|
|
IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
|
|
}
|
|
|
|
/**
|
|
* set_notification - Modify event notification
|
|
* @port: port to use
|
|
* @mask: events mask
|
|
* @set_on: set ?
|
|
*/
|
|
static int set_notification(struct ioc4_port *port, int mask, int set_on)
|
|
{
|
|
struct hooks *hooks = port->ip_hooks;
|
|
uint32_t intrbits, sscrbits;
|
|
|
|
BUG_ON(!mask);
|
|
|
|
intrbits = sscrbits = 0;
|
|
|
|
if (mask & N_DATA_READY)
|
|
intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high);
|
|
if (mask & N_OUTPUT_LOWAT)
|
|
intrbits |= hooks->intr_tx_explicit;
|
|
if (mask & N_DDCD) {
|
|
intrbits |= hooks->intr_delta_dcd;
|
|
sscrbits |= IOC4_SSCR_RX_RING_DCD;
|
|
}
|
|
if (mask & N_DCTS)
|
|
intrbits |= hooks->intr_delta_cts;
|
|
|
|
if (set_on) {
|
|
enable_intrs(port, intrbits);
|
|
port->ip_notify |= mask;
|
|
port->ip_sscr |= sscrbits;
|
|
} else {
|
|
disable_intrs(port, intrbits);
|
|
port->ip_notify &= ~mask;
|
|
port->ip_sscr &= ~sscrbits;
|
|
}
|
|
|
|
/* We require DMA if either DATA_READY or DDCD notification is
|
|
* currently requested. If neither of these is requested and
|
|
* there is currently no tx in progress, DMA may be disabled.
|
|
*/
|
|
if (port->ip_notify & (N_DATA_READY | N_DDCD))
|
|
port->ip_sscr |= IOC4_SSCR_DMA_EN;
|
|
else if (!(port->ip_ienb & hooks->intr_tx_mt))
|
|
port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
|
|
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* set_mcr - set the master control reg
|
|
* @the_port: port to use
|
|
* @mask1: mcr mask
|
|
* @mask2: shadow mask
|
|
*/
|
|
static inline int set_mcr(struct uart_port *the_port,
|
|
int mask1, int mask2)
|
|
{
|
|
struct ioc4_port *port = get_ioc4_port(the_port, 0);
|
|
uint32_t shadow;
|
|
int spiniter = 0;
|
|
char mcr;
|
|
|
|
if (!port)
|
|
return -1;
|
|
|
|
/* Pause the DMA interface if necessary */
|
|
if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
|
|
writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
|
|
&port->ip_serial_regs->sscr);
|
|
while ((readl(&port->ip_serial_regs->sscr)
|
|
& IOC4_SSCR_PAUSE_STATE) == 0) {
|
|
spiniter++;
|
|
if (spiniter > MAXITER)
|
|
return -1;
|
|
}
|
|
}
|
|
shadow = readl(&port->ip_serial_regs->shadow);
|
|
mcr = (shadow & 0xff000000) >> 24;
|
|
|
|
/* Set new value */
|
|
mcr |= mask1;
|
|
shadow |= mask2;
|
|
|
|
writeb(mcr, &port->ip_uart_regs->i4u_mcr);
|
|
writel(shadow, &port->ip_serial_regs->shadow);
|
|
|
|
/* Re-enable the DMA interface if necessary */
|
|
if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ioc4_set_proto - set the protocol for the port
|
|
* @port: port to use
|
|
* @proto: protocol to use
|
|
*/
|
|
static int ioc4_set_proto(struct ioc4_port *port, int proto)
|
|
{
|
|
struct hooks *hooks = port->ip_hooks;
|
|
|
|
switch (proto) {
|
|
case PROTO_RS232:
|
|
/* Clear the appropriate GIO pin */
|
|
writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
|
|
break;
|
|
|
|
case PROTO_RS422:
|
|
/* Set the appropriate GIO pin */
|
|
writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* transmit_chars - upper level write, called with ip_lock
|
|
* @the_port: port to write
|
|
*/
|
|
static void transmit_chars(struct uart_port *the_port)
|
|
{
|
|
int xmit_count, tail, head;
|
|
int result;
|
|
char *start;
|
|
struct tty_struct *tty;
|
|
struct ioc4_port *port = get_ioc4_port(the_port, 0);
|
|
struct uart_info *info;
|
|
|
|
if (!the_port)
|
|
return;
|
|
if (!port)
|
|
return;
|
|
|
|
info = the_port->info;
|
|
tty = info->tty;
|
|
|
|
if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
|
|
/* Nothing to do or hw stopped */
|
|
set_notification(port, N_ALL_OUTPUT, 0);
|
|
return;
|
|
}
|
|
|
|
head = info->xmit.head;
|
|
tail = info->xmit.tail;
|
|
start = (char *)&info->xmit.buf[tail];
|
|
|
|
/* write out all the data or until the end of the buffer */
|
|
xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
|
|
if (xmit_count > 0) {
|
|
result = do_write(port, start, xmit_count);
|
|
if (result > 0) {
|
|
/* booking */
|
|
xmit_count -= result;
|
|
the_port->icount.tx += result;
|
|
/* advance the pointers */
|
|
tail += result;
|
|
tail &= UART_XMIT_SIZE - 1;
|
|
info->xmit.tail = tail;
|
|
start = (char *)&info->xmit.buf[tail];
|
|
}
|
|
}
|
|
if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(the_port);
|
|
|
|
if (uart_circ_empty(&info->xmit)) {
|
|
set_notification(port, N_OUTPUT_LOWAT, 0);
|
|
} else {
|
|
set_notification(port, N_OUTPUT_LOWAT, 1);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ioc4_change_speed - change the speed of the port
|
|
* @the_port: port to change
|
|
* @new_termios: new termios settings
|
|
* @old_termios: old termios settings
|
|
*/
|
|
static void
|
|
ioc4_change_speed(struct uart_port *the_port,
|
|
struct termios *new_termios, struct termios *old_termios)
|
|
{
|
|
struct ioc4_port *port = get_ioc4_port(the_port, 0);
|
|
int baud, bits;
|
|
unsigned cflag;
|
|
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
|
|
struct uart_info *info = the_port->info;
|
|
|
|
cflag = new_termios->c_cflag;
|
|
|
|
switch (cflag & CSIZE) {
|
|
case CS5:
|
|
new_data = 5;
|
|
bits = 7;
|
|
break;
|
|
case CS6:
|
|
new_data = 6;
|
|
bits = 8;
|
|
break;
|
|
case CS7:
|
|
new_data = 7;
|
|
bits = 9;
|
|
break;
|
|
case CS8:
|
|
new_data = 8;
|
|
bits = 10;
|
|
break;
|
|
default:
|
|
/* cuz we always need a default ... */
|
|
new_data = 5;
|
|
bits = 7;
|
|
break;
|
|
}
|
|
if (cflag & CSTOPB) {
|
|
bits++;
|
|
new_stop = 1;
|
|
}
|
|
if (cflag & PARENB) {
|
|
bits++;
|
|
new_parity_enable = 1;
|
|
if (cflag & PARODD)
|
|
new_parity = 1;
|
|
}
|
|
baud = uart_get_baud_rate(the_port, new_termios, old_termios,
|
|
MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
|
|
DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud));
|
|
|
|
/* default is 9600 */
|
|
if (!baud)
|
|
baud = 9600;
|
|
|
|
if (!the_port->fifosize)
|
|
the_port->fifosize = IOC4_FIFO_CHARS;
|
|
the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
|
|
the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
|
|
|
|
the_port->ignore_status_mask = N_ALL_INPUT;
|
|
|
|
info->tty->low_latency = 1;
|
|
|
|
if (I_IGNPAR(info->tty))
|
|
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
|
|
| N_FRAMING_ERROR);
|
|
if (I_IGNBRK(info->tty)) {
|
|
the_port->ignore_status_mask &= ~N_BREAK;
|
|
if (I_IGNPAR(info->tty))
|
|
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
|
|
}
|
|
if (!(cflag & CREAD)) {
|
|
/* ignore everything */
|
|
the_port->ignore_status_mask &= ~N_DATA_READY;
|
|
}
|
|
|
|
if (cflag & CRTSCTS) {
|
|
port->ip_sscr |= IOC4_SSCR_HFC_EN;
|
|
}
|
|
else {
|
|
port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
|
|
}
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
|
|
/* Set the configuration and proper notification call */
|
|
DPRINT_CONFIG(("%s : port 0x%p cflag 0%o "
|
|
"config_port(baud %d data %d stop %d p enable %d parity %d),"
|
|
" notification 0x%x\n",
|
|
__FUNCTION__, (void *)port, cflag, baud, new_data, new_stop,
|
|
new_parity_enable, new_parity, the_port->ignore_status_mask));
|
|
|
|
if ((config_port(port, baud, /* baud */
|
|
new_data, /* byte size */
|
|
new_stop, /* stop bits */
|
|
new_parity_enable, /* set parity */
|
|
new_parity)) >= 0) { /* parity 1==odd */
|
|
set_notification(port, the_port->ignore_status_mask, 1);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ic4_startup_local - Start up the serial port - returns >= 0 if no errors
|
|
* @the_port: Port to operate on
|
|
*/
|
|
static inline int ic4_startup_local(struct uart_port *the_port)
|
|
{
|
|
struct ioc4_port *port;
|
|
struct uart_info *info;
|
|
|
|
if (!the_port)
|
|
return -1;
|
|
|
|
port = get_ioc4_port(the_port, 0);
|
|
if (!port)
|
|
return -1;
|
|
|
|
info = the_port->info;
|
|
|
|
local_open(port);
|
|
|
|
/* set the protocol - mapbase has the port type */
|
|
ioc4_set_proto(port, the_port->mapbase);
|
|
|
|
/* set the speed of the serial port */
|
|
ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ioc4_cb_output_lowat - called when the output low water mark is hit
|
|
* @the_port: port to output
|
|
*/
|
|
static void ioc4_cb_output_lowat(struct uart_port *the_port)
|
|
{
|
|
unsigned long pflags;
|
|
|
|
/* ip_lock is set on the call here */
|
|
if (the_port) {
|
|
spin_lock_irqsave(&the_port->lock, pflags);
|
|
transmit_chars(the_port);
|
|
spin_unlock_irqrestore(&the_port->lock, pflags);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* handle_intr - service any interrupts for the given port - 2nd level
|
|
* called via sd_intr
|
|
* @arg: handler arg
|
|
* @sio_ir: ioc4regs
|
|
*/
|
|
static void handle_intr(void *arg, uint32_t sio_ir)
|
|
{
|
|
struct ioc4_port *port = (struct ioc4_port *)arg;
|
|
struct hooks *hooks = port->ip_hooks;
|
|
unsigned int rx_high_rd_aborted = 0;
|
|
unsigned long flags;
|
|
struct uart_port *the_port;
|
|
int loop_counter;
|
|
|
|
/* Possible race condition here: The tx_mt interrupt bit may be
|
|
* cleared without the intervention of the interrupt handler,
|
|
* e.g. by a write. If the top level interrupt handler reads a
|
|
* tx_mt, then some other processor does a write, starting up
|
|
* output, then we come in here, see the tx_mt and stop DMA, the
|
|
* output started by the other processor will hang. Thus we can
|
|
* only rely on tx_mt being legitimate if it is read while the
|
|
* port lock is held. Therefore this bit must be ignored in the
|
|
* passed in interrupt mask which was read by the top level
|
|
* interrupt handler since the port lock was not held at the time
|
|
* it was read. We can only rely on this bit being accurate if it
|
|
* is read while the port lock is held. So we'll clear it for now,
|
|
* and reload it later once we have the port lock.
|
|
*/
|
|
sio_ir &= ~(hooks->intr_tx_mt);
|
|
|
|
spin_lock_irqsave(&port->ip_lock, flags);
|
|
|
|
loop_counter = MAXITER; /* to avoid hangs */
|
|
|
|
do {
|
|
uint32_t shadow;
|
|
|
|
if ( loop_counter-- <= 0 ) {
|
|
printk(KERN_WARNING "IOC4 serial: "
|
|
"possible hang condition/"
|
|
"port stuck on interrupt.\n");
|
|
break;
|
|
}
|
|
|
|
/* Handle a DCD change */
|
|
if (sio_ir & hooks->intr_delta_dcd) {
|
|
/* ACK the interrupt */
|
|
writel(hooks->intr_delta_dcd,
|
|
&port->ip_mem->sio_ir.raw);
|
|
|
|
shadow = readl(&port->ip_serial_regs->shadow);
|
|
|
|
if ((port->ip_notify & N_DDCD)
|
|
&& (shadow & IOC4_SHADOW_DCD)
|
|
&& (port->ip_port)) {
|
|
the_port = port->ip_port;
|
|
the_port->icount.dcd = 1;
|
|
wake_up_interruptible
|
|
(&the_port-> info->delta_msr_wait);
|
|
} else if ((port->ip_notify & N_DDCD)
|
|
&& !(shadow & IOC4_SHADOW_DCD)) {
|
|
/* Flag delta DCD/no DCD */
|
|
port->ip_flags |= DCD_ON;
|
|
}
|
|
}
|
|
|
|
/* Handle a CTS change */
|
|
if (sio_ir & hooks->intr_delta_cts) {
|
|
/* ACK the interrupt */
|
|
writel(hooks->intr_delta_cts,
|
|
&port->ip_mem->sio_ir.raw);
|
|
|
|
shadow = readl(&port->ip_serial_regs->shadow);
|
|
|
|
if ((port->ip_notify & N_DCTS)
|
|
&& (port->ip_port)) {
|
|
the_port = port->ip_port;
|
|
the_port->icount.cts =
|
|
(shadow & IOC4_SHADOW_CTS) ? 1 : 0;
|
|
wake_up_interruptible
|
|
(&the_port->info->delta_msr_wait);
|
|
}
|
|
}
|
|
|
|
/* rx timeout interrupt. Must be some data available. Put this
|
|
* before the check for rx_high since servicing this condition
|
|
* may cause that condition to clear.
|
|
*/
|
|
if (sio_ir & hooks->intr_rx_timer) {
|
|
/* ACK the interrupt */
|
|
writel(hooks->intr_rx_timer,
|
|
&port->ip_mem->sio_ir.raw);
|
|
|
|
if ((port->ip_notify & N_DATA_READY)
|
|
&& (port->ip_port)) {
|
|
/* ip_lock is set on call here */
|
|
receive_chars(port->ip_port);
|
|
}
|
|
}
|
|
|
|
/* rx high interrupt. Must be after rx_timer. */
|
|
else if (sio_ir & hooks->intr_rx_high) {
|
|
/* Data available, notify upper layer */
|
|
if ((port->ip_notify & N_DATA_READY)
|
|
&& port->ip_port) {
|
|
/* ip_lock is set on call here */
|
|
receive_chars(port->ip_port);
|
|
}
|
|
|
|
/* We can't ACK this interrupt. If receive_chars didn't
|
|
* cause the condition to clear, we'll have to disable
|
|
* the interrupt until the data is drained.
|
|
* If the read was aborted, don't disable the interrupt
|
|
* as this may cause us to hang indefinitely. An
|
|
* aborted read generally means that this interrupt
|
|
* hasn't been delivered to the cpu yet anyway, even
|
|
* though we see it as asserted when we read the sio_ir.
|
|
*/
|
|
if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) {
|
|
if ((port->ip_flags & READ_ABORTED) == 0) {
|
|
port->ip_ienb &= ~hooks->intr_rx_high;
|
|
port->ip_flags |= INPUT_HIGH;
|
|
} else {
|
|
rx_high_rd_aborted++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* We got a low water interrupt: notify upper layer to
|
|
* send more data. Must come before tx_mt since servicing
|
|
* this condition may cause that condition to clear.
|
|
*/
|
|
if (sio_ir & hooks->intr_tx_explicit) {
|
|
port->ip_flags &= ~LOWAT_WRITTEN;
|
|
|
|
/* ACK the interrupt */
|
|
writel(hooks->intr_tx_explicit,
|
|
&port->ip_mem->sio_ir.raw);
|
|
|
|
if (port->ip_notify & N_OUTPUT_LOWAT)
|
|
ioc4_cb_output_lowat(port->ip_port);
|
|
}
|
|
|
|
/* Handle tx_mt. Must come after tx_explicit. */
|
|
else if (sio_ir & hooks->intr_tx_mt) {
|
|
/* If we are expecting a lowat notification
|
|
* and we get to this point it probably means that for
|
|
* some reason the tx_explicit didn't work as expected
|
|
* (that can legitimately happen if the output buffer is
|
|
* filled up in just the right way).
|
|
* So send the notification now.
|
|
*/
|
|
if (port->ip_notify & N_OUTPUT_LOWAT) {
|
|
ioc4_cb_output_lowat(port->ip_port);
|
|
|
|
/* We need to reload the sio_ir since the lowat
|
|
* call may have caused another write to occur,
|
|
* clearing the tx_mt condition.
|
|
*/
|
|
sio_ir = PENDING(port);
|
|
}
|
|
|
|
/* If the tx_mt condition still persists even after the
|
|
* lowat call, we've got some work to do.
|
|
*/
|
|
if (sio_ir & hooks->intr_tx_mt) {
|
|
|
|
/* If we are not currently expecting DMA input,
|
|
* and the transmitter has just gone idle,
|
|
* there is no longer any reason for DMA, so
|
|
* disable it.
|
|
*/
|
|
if (!(port->ip_notify
|
|
& (N_DATA_READY | N_DDCD))) {
|
|
BUG_ON(!(port->ip_sscr
|
|
& IOC4_SSCR_DMA_EN));
|
|
port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
|
|
writel(port->ip_sscr,
|
|
&port->ip_serial_regs->sscr);
|
|
}
|
|
|
|
/* Prevent infinite tx_mt interrupt */
|
|
port->ip_ienb &= ~hooks->intr_tx_mt;
|
|
}
|
|
}
|
|
sio_ir = PENDING(port);
|
|
|
|
/* if the read was aborted and only hooks->intr_rx_high,
|
|
* clear hooks->intr_rx_high, so we do not loop forever.
|
|
*/
|
|
|
|
if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) {
|
|
sio_ir &= ~hooks->intr_rx_high;
|
|
}
|
|
} while (sio_ir & hooks->intr_all);
|
|
|
|
spin_unlock_irqrestore(&port->ip_lock, flags);
|
|
|
|
/* Re-enable interrupts before returning from interrupt handler.
|
|
* Getting interrupted here is okay. It'll just v() our semaphore, and
|
|
* we'll come through the loop again.
|
|
*/
|
|
|
|
write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES,
|
|
IOC4_SIO_INTR_TYPE);
|
|
}
|
|
|
|
/*
|
|
* ioc4_cb_post_ncs - called for some basic errors
|
|
* @port: port to use
|
|
* @ncs: event
|
|
*/
|
|
static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs)
|
|
{
|
|
struct uart_icount *icount;
|
|
|
|
icount = &the_port->icount;
|
|
|
|
if (ncs & NCS_BREAK)
|
|
icount->brk++;
|
|
if (ncs & NCS_FRAMING)
|
|
icount->frame++;
|
|
if (ncs & NCS_OVERRUN)
|
|
icount->overrun++;
|
|
if (ncs & NCS_PARITY)
|
|
icount->parity++;
|
|
}
|
|
|
|
/**
|
|
* do_read - Read in bytes from the port. Return the number of bytes
|
|
* actually read.
|
|
* @the_port: port to use
|
|
* @buf: place to put the stuff we read
|
|
* @len: how big 'buf' is
|
|
*/
|
|
|
|
static inline int do_read(struct uart_port *the_port, unsigned char *buf,
|
|
int len)
|
|
{
|
|
int prod_ptr, cons_ptr, total;
|
|
struct ioc4_port *port = get_ioc4_port(the_port, 0);
|
|
struct ring *inring;
|
|
struct ring_entry *entry;
|
|
struct hooks *hooks = port->ip_hooks;
|
|
int byte_num;
|
|
char *sc;
|
|
int loop_counter;
|
|
|
|
BUG_ON(!(len >= 0));
|
|
BUG_ON(!port);
|
|
|
|
/* There is a nasty timing issue in the IOC4. When the rx_timer
|
|
* expires or the rx_high condition arises, we take an interrupt.
|
|
* At some point while servicing the interrupt, we read bytes from
|
|
* the ring buffer and re-arm the rx_timer. However the rx_timer is
|
|
* not started until the first byte is received *after* it is armed,
|
|
* and any bytes pending in the rx construction buffers are not drained
|
|
* to memory until either there are 4 bytes available or the rx_timer
|
|
* expires. This leads to a potential situation where data is left
|
|
* in the construction buffers forever - 1 to 3 bytes were received
|
|
* after the interrupt was generated but before the rx_timer was
|
|
* re-armed. At that point as long as no subsequent bytes are received
|
|
* the timer will never be started and the bytes will remain in the
|
|
* construction buffer forever. The solution is to execute a DRAIN
|
|
* command after rearming the timer. This way any bytes received before
|
|
* the DRAIN will be drained to memory, and any bytes received after
|
|
* the DRAIN will start the TIMER and be drained when it expires.
|
|
* Luckily, this only needs to be done when the DMA buffer is empty
|
|
* since there is no requirement that this function return all
|
|
* available data as long as it returns some.
|
|
*/
|
|
/* Re-arm the timer */
|
|
writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
|
|
|
|
prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
|
|
cons_ptr = port->ip_rx_cons;
|
|
|
|
if (prod_ptr == cons_ptr) {
|
|
int reset_dma = 0;
|
|
|
|
/* Input buffer appears empty, do a flush. */
|
|
|
|
/* DMA must be enabled for this to work. */
|
|
if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
|
|
port->ip_sscr |= IOC4_SSCR_DMA_EN;
|
|
reset_dma = 1;
|
|
}
|
|
|
|
/* Potential race condition: we must reload the srpir after
|
|
* issuing the drain command, otherwise we could think the rx
|
|
* buffer is empty, then take a very long interrupt, and when
|
|
* we come back it's full and we wait forever for the drain to
|
|
* complete.
|
|
*/
|
|
writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN,
|
|
&port->ip_serial_regs->sscr);
|
|
prod_ptr = readl(&port->ip_serial_regs->srpir)
|
|
& PROD_CONS_MASK;
|
|
|
|
/* We must not wait for the DRAIN to complete unless there are
|
|
* at least 8 bytes (2 ring entries) available to receive the
|
|
* data otherwise the DRAIN will never complete and we'll
|
|
* deadlock here.
|
|
* In fact, to make things easier, I'll just ignore the flush if
|
|
* there is any data at all now available.
|
|
*/
|
|
if (prod_ptr == cons_ptr) {
|
|
loop_counter = 0;
|
|
while (readl(&port->ip_serial_regs->sscr) &
|
|
IOC4_SSCR_RX_DRAIN) {
|
|
loop_counter++;
|
|
if (loop_counter > MAXITER)
|
|
return -1;
|
|
}
|
|
|
|
/* SIGH. We have to reload the prod_ptr *again* since
|
|
* the drain may have caused it to change
|
|
*/
|
|
prod_ptr = readl(&port->ip_serial_regs->srpir)
|
|
& PROD_CONS_MASK;
|
|
}
|
|
if (reset_dma) {
|
|
port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
|
|
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
|
|
}
|
|
}
|
|
inring = port->ip_inring;
|
|
port->ip_flags &= ~READ_ABORTED;
|
|
|
|
total = 0;
|
|
loop_counter = 0xfffff; /* to avoid hangs */
|
|
|
|
/* Grab bytes from the hardware */
|
|
while ((prod_ptr != cons_ptr) && (len > 0)) {
|
|
entry = (struct ring_entry *)((caddr_t)inring + cons_ptr);
|
|
|
|
if ( loop_counter-- <= 0 ) {
|
|
printk(KERN_WARNING "IOC4 serial: "
|
|
"possible hang condition/"
|
|
"port stuck on read.\n");
|
|
break;
|
|
}
|
|
|
|
/* According to the producer pointer, this ring entry
|
|
* must contain some data. But if the PIO happened faster
|
|
* than the DMA, the data may not be available yet, so let's
|
|
* wait until it arrives.
|
|
*/
|
|
if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
|
|
/* Indicate the read is aborted so we don't disable
|
|
* the interrupt thinking that the consumer is
|
|
* congested.
|
|
*/
|
|
port->ip_flags |= READ_ABORTED;
|
|
len = 0;
|
|
break;
|
|
}
|
|
|
|
/* Load the bytes/status out of the ring entry */
|
|
for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) {
|
|
sc = &(entry->ring_sc[byte_num]);
|
|
|
|
/* Check for change in modem state or overrun */
|
|
if ((*sc & IOC4_RXSB_MODEM_VALID)
|
|
&& (port->ip_notify & N_DDCD)) {
|
|
/* Notify upper layer if DCD dropped */
|
|
|
|
if ((port->ip_flags & DCD_ON)
|
|
&& !(*sc & IOC4_RXSB_DCD)) {
|
|
|
|
/* If we have already copied some data,
|
|
* return it. We'll pick up the carrier
|
|
* drop on the next pass. That way we
|
|
* don't throw away the data that has
|
|
* already been copied back to
|
|
* the caller's buffer.
|
|
*/
|
|
if (total > 0) {
|
|
len = 0;
|
|
break;
|
|
}
|
|
port->ip_flags &= ~DCD_ON;
|
|
|
|
/* Turn off this notification so the
|
|
* carrier drop protocol won't see it
|
|
* again when it does a read.
|
|
*/
|
|
*sc &= ~IOC4_RXSB_MODEM_VALID;
|
|
|
|
/* To keep things consistent, we need
|
|
* to update the consumer pointer so
|
|
* the next reader won't come in and
|
|
* try to read the same ring entries
|
|
* again. This must be done here before
|
|
* the dcd change.
|
|
*/
|
|
|
|
if ((entry->ring_allsc & RING_ANY_VALID)
|
|
== 0) {
|
|
cons_ptr += (int)sizeof
|
|
(struct ring_entry);
|
|
cons_ptr &= PROD_CONS_MASK;
|
|
}
|
|
writel(cons_ptr,
|
|
&port->ip_serial_regs->srcir);
|
|
port->ip_rx_cons = cons_ptr;
|
|
|
|
/* Notify upper layer of carrier drop */
|
|
if ((port->ip_notify & N_DDCD)
|
|
&& port->ip_port) {
|
|
the_port->icount.dcd = 0;
|
|
wake_up_interruptible
|
|
(&the_port->info->
|
|
delta_msr_wait);
|
|
}
|
|
|
|
/* If we had any data to return, we
|
|
* would have returned it above.
|
|
*/
|
|
return 0;
|
|
}
|
|
}
|
|
if (*sc & IOC4_RXSB_MODEM_VALID) {
|
|
/* Notify that an input overrun occurred */
|
|
if ((*sc & IOC4_RXSB_OVERRUN)
|
|
&& (port->ip_notify & N_OVERRUN_ERROR)) {
|
|
ioc4_cb_post_ncs(the_port, NCS_OVERRUN);
|
|
}
|
|
/* Don't look at this byte again */
|
|
*sc &= ~IOC4_RXSB_MODEM_VALID;
|
|
}
|
|
|
|
/* Check for valid data or RX errors */
|
|
if ((*sc & IOC4_RXSB_DATA_VALID) &&
|
|
((*sc & (IOC4_RXSB_PAR_ERR
|
|
| IOC4_RXSB_FRAME_ERR
|
|
| IOC4_RXSB_BREAK))
|
|
&& (port->ip_notify & (N_PARITY_ERROR
|
|
| N_FRAMING_ERROR
|
|
| N_BREAK)))) {
|
|
/* There is an error condition on the next byte.
|
|
* If we have already transferred some bytes,
|
|
* we'll stop here. Otherwise if this is the
|
|
* first byte to be read, we'll just transfer
|
|
* it alone after notifying the
|
|
* upper layer of its status.
|
|
*/
|
|
if (total > 0) {
|
|
len = 0;
|
|
break;
|
|
} else {
|
|
if ((*sc & IOC4_RXSB_PAR_ERR) &&
|
|
(port->ip_notify & N_PARITY_ERROR)) {
|
|
ioc4_cb_post_ncs(the_port,
|
|
NCS_PARITY);
|
|
}
|
|
if ((*sc & IOC4_RXSB_FRAME_ERR) &&
|
|
(port->ip_notify & N_FRAMING_ERROR)){
|
|
ioc4_cb_post_ncs(the_port,
|
|
NCS_FRAMING);
|
|
}
|
|
if ((*sc & IOC4_RXSB_BREAK)
|
|
&& (port->ip_notify & N_BREAK)) {
|
|
ioc4_cb_post_ncs
|
|
(the_port,
|
|
NCS_BREAK);
|
|
}
|
|
len = 1;
|
|
}
|
|
}
|
|
if (*sc & IOC4_RXSB_DATA_VALID) {
|
|
*sc &= ~IOC4_RXSB_DATA_VALID;
|
|
*buf = entry->ring_data[byte_num];
|
|
buf++;
|
|
len--;
|
|
total++;
|
|
}
|
|
}
|
|
|
|
/* If we used up this entry entirely, go on to the next one,
|
|
* otherwise we must have run out of buffer space, so
|
|
* leave the consumer pointer here for the next read in case
|
|
* there are still unread bytes in this entry.
|
|
*/
|
|
if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
|
|
cons_ptr += (int)sizeof(struct ring_entry);
|
|
cons_ptr &= PROD_CONS_MASK;
|
|
}
|
|
}
|
|
|
|
/* Update consumer pointer and re-arm rx timer interrupt */
|
|
writel(cons_ptr, &port->ip_serial_regs->srcir);
|
|
port->ip_rx_cons = cons_ptr;
|
|
|
|
/* If we have now dipped below the rx high water mark and we have
|
|
* rx_high interrupt turned off, we can now turn it back on again.
|
|
*/
|
|
if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr)
|
|
& PROD_CONS_MASK) < ((port->ip_sscr &
|
|
IOC4_SSCR_RX_THRESHOLD)
|
|
<< IOC4_PROD_CONS_PTR_OFF))) {
|
|
port->ip_flags &= ~INPUT_HIGH;
|
|
enable_intrs(port, hooks->intr_rx_high);
|
|
}
|
|
return total;
|
|
}
|
|
|
|
/**
|
|
* receive_chars - upper level read. Called with ip_lock.
|
|
* @the_port: port to read from
|
|
*/
|
|
static void receive_chars(struct uart_port *the_port)
|
|
{
|
|
struct tty_struct *tty;
|
|
unsigned char ch[IOC4_MAX_CHARS];
|
|
int read_count, request_count = IOC4_MAX_CHARS;
|
|
struct uart_icount *icount;
|
|
struct uart_info *info = the_port->info;
|
|
unsigned long pflags;
|
|
|
|
/* Make sure all the pointers are "good" ones */
|
|
if (!info)
|
|
return;
|
|
if (!info->tty)
|
|
return;
|
|
|
|
spin_lock_irqsave(&the_port->lock, pflags);
|
|
tty = info->tty;
|
|
|
|
request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
|
|
|
|
if (request_count > 0) {
|
|
icount = &the_port->icount;
|
|
read_count = do_read(the_port, ch, request_count);
|
|
if (read_count > 0) {
|
|
tty_insert_flip_string(tty, ch, read_count);
|
|
icount->rx += read_count;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&the_port->lock, pflags);
|
|
|
|
tty_flip_buffer_push(tty);
|
|
}
|
|
|
|
/**
|
|
* ic4_type - What type of console are we?
|
|
* @port: Port to operate with (we ignore since we only have one port)
|
|
*
|
|
*/
|
|
static const char *ic4_type(struct uart_port *the_port)
|
|
{
|
|
if (the_port->mapbase == PROTO_RS232)
|
|
return "SGI IOC4 Serial [rs232]";
|
|
else
|
|
return "SGI IOC4 Serial [rs422]";
|
|
}
|
|
|
|
/**
|
|
* ic4_tx_empty - Is the transmitter empty?
|
|
* @port: Port to operate on
|
|
*
|
|
*/
|
|
static unsigned int ic4_tx_empty(struct uart_port *the_port)
|
|
{
|
|
struct ioc4_port *port = get_ioc4_port(the_port, 0);
|
|
unsigned int ret = 0;
|
|
|
|
if (port_is_active(port, the_port)) {
|
|
if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT)
|
|
ret = TIOCSER_TEMT;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ic4_stop_tx - stop the transmitter
|
|
* @port: Port to operate on
|
|
*
|
|
*/
|
|
static void ic4_stop_tx(struct uart_port *the_port)
|
|
{
|
|
struct ioc4_port *port = get_ioc4_port(the_port, 0);
|
|
|
|
if (port_is_active(port, the_port))
|
|
set_notification(port, N_OUTPUT_LOWAT, 0);
|
|
}
|
|
|
|
/**
|
|
* null_void_function -
|
|
* @port: Port to operate on
|
|
*
|
|
*/
|
|
static void null_void_function(struct uart_port *the_port)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* ic4_shutdown - shut down the port - free irq and disable
|
|
* @port: Port to shut down
|
|
*
|
|
*/
|
|
static void ic4_shutdown(struct uart_port *the_port)
|
|
{
|
|
unsigned long port_flags;
|
|
struct ioc4_port *port;
|
|
struct uart_info *info;
|
|
|
|
port = get_ioc4_port(the_port, 0);
|
|
if (!port)
|
|
return;
|
|
|
|
info = the_port->info;
|
|
port->ip_port = NULL;
|
|
|
|
wake_up_interruptible(&info->delta_msr_wait);
|
|
|
|
if (info->tty)
|
|
set_bit(TTY_IO_ERROR, &info->tty->flags);
|
|
|
|
spin_lock_irqsave(&the_port->lock, port_flags);
|
|
set_notification(port, N_ALL, 0);
|
|
port->ip_flags = PORT_INACTIVE;
|
|
spin_unlock_irqrestore(&the_port->lock, port_flags);
|
|
}
|
|
|
|
/**
|
|
* ic4_set_mctrl - set control lines (dtr, rts, etc)
|
|
* @port: Port to operate on
|
|
* @mctrl: Lines to set/unset
|
|
*
|
|
*/
|
|
static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
|
|
{
|
|
unsigned char mcr = 0;
|
|
struct ioc4_port *port;
|
|
|
|
port = get_ioc4_port(the_port, 0);
|
|
if (!port_is_active(port, the_port))
|
|
return;
|
|
|
|
if (mctrl & TIOCM_RTS)
|
|
mcr |= UART_MCR_RTS;
|
|
if (mctrl & TIOCM_DTR)
|
|
mcr |= UART_MCR_DTR;
|
|
if (mctrl & TIOCM_OUT1)
|
|
mcr |= UART_MCR_OUT1;
|
|
if (mctrl & TIOCM_OUT2)
|
|
mcr |= UART_MCR_OUT2;
|
|
if (mctrl & TIOCM_LOOP)
|
|
mcr |= UART_MCR_LOOP;
|
|
|
|
set_mcr(the_port, mcr, IOC4_SHADOW_DTR);
|
|
}
|
|
|
|
/**
|
|
* ic4_get_mctrl - get control line info
|
|
* @port: port to operate on
|
|
*
|
|
*/
|
|
static unsigned int ic4_get_mctrl(struct uart_port *the_port)
|
|
{
|
|
struct ioc4_port *port = get_ioc4_port(the_port, 0);
|
|
uint32_t shadow;
|
|
unsigned int ret = 0;
|
|
|
|
if (!port_is_active(port, the_port))
|
|
return 0;
|
|
|
|
shadow = readl(&port->ip_serial_regs->shadow);
|
|
if (shadow & IOC4_SHADOW_DCD)
|
|
ret |= TIOCM_CAR;
|
|
if (shadow & IOC4_SHADOW_DR)
|
|
ret |= TIOCM_DSR;
|
|
if (shadow & IOC4_SHADOW_CTS)
|
|
ret |= TIOCM_CTS;
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ic4_start_tx - Start transmitter, flush any output
|
|
* @port: Port to operate on
|
|
*
|
|
*/
|
|
static void ic4_start_tx(struct uart_port *the_port)
|
|
{
|
|
struct ioc4_port *port = get_ioc4_port(the_port, 0);
|
|
|
|
if (port_is_active(port, the_port)) {
|
|
set_notification(port, N_OUTPUT_LOWAT, 1);
|
|
enable_intrs(port, port->ip_hooks->intr_tx_mt);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ic4_break_ctl - handle breaks
|
|
* @port: Port to operate on
|
|
* @break_state: Break state
|
|
*
|
|
*/
|
|
static void ic4_break_ctl(struct uart_port *the_port, int break_state)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* ic4_startup - Start up the serial port
|
|
* @port: Port to operate on
|
|
*
|
|
*/
|
|
static int ic4_startup(struct uart_port *the_port)
|
|
{
|
|
int retval;
|
|
struct ioc4_port *port;
|
|
struct ioc4_control *control;
|
|
struct uart_info *info;
|
|
unsigned long port_flags;
|
|
|
|
if (!the_port)
|
|
return -ENODEV;
|
|
port = get_ioc4_port(the_port, 1);
|
|
if (!port)
|
|
return -ENODEV;
|
|
info = the_port->info;
|
|
|
|
control = port->ip_control;
|
|
if (!control) {
|
|
port->ip_port = NULL;
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Start up the serial port */
|
|
spin_lock_irqsave(&the_port->lock, port_flags);
|
|
retval = ic4_startup_local(the_port);
|
|
spin_unlock_irqrestore(&the_port->lock, port_flags);
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* ic4_set_termios - set termios stuff
|
|
* @port: port to operate on
|
|
* @termios: New settings
|
|
* @termios: Old
|
|
*
|
|
*/
|
|
static void
|
|
ic4_set_termios(struct uart_port *the_port,
|
|
struct termios *termios, struct termios *old_termios)
|
|
{
|
|
unsigned long port_flags;
|
|
|
|
spin_lock_irqsave(&the_port->lock, port_flags);
|
|
ioc4_change_speed(the_port, termios, old_termios);
|
|
spin_unlock_irqrestore(&the_port->lock, port_flags);
|
|
}
|
|
|
|
/**
|
|
* ic4_request_port - allocate resources for port - no op....
|
|
* @port: port to operate on
|
|
*
|
|
*/
|
|
static int ic4_request_port(struct uart_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Associate the uart functions above - given to serial core */
|
|
|
|
static struct uart_ops ioc4_ops = {
|
|
.tx_empty = ic4_tx_empty,
|
|
.set_mctrl = ic4_set_mctrl,
|
|
.get_mctrl = ic4_get_mctrl,
|
|
.stop_tx = ic4_stop_tx,
|
|
.start_tx = ic4_start_tx,
|
|
.stop_rx = null_void_function,
|
|
.enable_ms = null_void_function,
|
|
.break_ctl = ic4_break_ctl,
|
|
.startup = ic4_startup,
|
|
.shutdown = ic4_shutdown,
|
|
.set_termios = ic4_set_termios,
|
|
.type = ic4_type,
|
|
.release_port = null_void_function,
|
|
.request_port = ic4_request_port,
|
|
};
|
|
|
|
/*
|
|
* Boot-time initialization code
|
|
*/
|
|
|
|
static struct uart_driver ioc4_uart_rs232 = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "ioc4_serial_rs232",
|
|
.dev_name = DEVICE_NAME_RS232,
|
|
.major = DEVICE_MAJOR,
|
|
.minor = DEVICE_MINOR_RS232,
|
|
.nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
|
|
};
|
|
|
|
static struct uart_driver ioc4_uart_rs422 = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "ioc4_serial_rs422",
|
|
.dev_name = DEVICE_NAME_RS422,
|
|
.major = DEVICE_MAJOR,
|
|
.minor = DEVICE_MINOR_RS422,
|
|
.nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
|
|
};
|
|
|
|
|
|
/**
|
|
* ioc4_serial_remove_one - detach function
|
|
*
|
|
* @idd: IOC4 master module data for this IOC4
|
|
*/
|
|
|
|
static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
|
|
{
|
|
int port_num, port_type;
|
|
struct ioc4_control *control;
|
|
struct uart_port *the_port;
|
|
struct ioc4_port *port;
|
|
struct ioc4_soft *soft;
|
|
|
|
/* If serial driver did not attach, don't try to detach */
|
|
control = idd->idd_serial_data;
|
|
if (!control)
|
|
return 0;
|
|
|
|
for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
|
|
for (port_type = UART_PORT_MIN;
|
|
port_type < UART_PORT_COUNT;
|
|
port_type++) {
|
|
the_port = &control->ic_port[port_num].icp_uart_port
|
|
[port_type];
|
|
if (the_port) {
|
|
switch (port_type) {
|
|
case UART_PORT_RS422:
|
|
uart_remove_one_port(&ioc4_uart_rs422,
|
|
the_port);
|
|
break;
|
|
default:
|
|
case UART_PORT_RS232:
|
|
uart_remove_one_port(&ioc4_uart_rs232,
|
|
the_port);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
port = control->ic_port[port_num].icp_port;
|
|
/* we allocate in pairs */
|
|
if (!(port_num & 1) && port) {
|
|
pci_free_consistent(port->ip_pdev,
|
|
TOTAL_RING_BUF_SIZE,
|
|
port->ip_cpu_ringbuf,
|
|
port->ip_dma_ringbuf);
|
|
kfree(port);
|
|
}
|
|
}
|
|
soft = control->ic_soft;
|
|
if (soft) {
|
|
free_irq(control->ic_irq, soft);
|
|
if (soft->is_ioc4_serial_addr) {
|
|
iounmap(soft->is_ioc4_serial_addr);
|
|
release_region((unsigned long)
|
|
soft->is_ioc4_serial_addr,
|
|
sizeof(struct ioc4_serial));
|
|
}
|
|
kfree(soft);
|
|
}
|
|
kfree(control);
|
|
idd->idd_serial_data = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* ioc4_serial_core_attach_rs232 - register with serial core
|
|
* This is done during pci probing
|
|
* @pdev: handle for this card
|
|
*/
|
|
static inline int
|
|
ioc4_serial_core_attach(struct pci_dev *pdev, int port_type)
|
|
{
|
|
struct ioc4_port *port;
|
|
struct uart_port *the_port;
|
|
struct ioc4_driver_data *idd = pci_get_drvdata(pdev);
|
|
struct ioc4_control *control = idd->idd_serial_data;
|
|
int port_num;
|
|
int port_type_idx;
|
|
struct uart_driver *u_driver;
|
|
|
|
|
|
DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
|
|
__FUNCTION__, pdev, (void *)control));
|
|
|
|
if (!control)
|
|
return -ENODEV;
|
|
|
|
port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232
|
|
: UART_PORT_RS422;
|
|
|
|
u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232
|
|
: &ioc4_uart_rs422;
|
|
|
|
/* once around for each port on this card */
|
|
for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
|
|
the_port = &control->ic_port[port_num].icp_uart_port
|
|
[port_type_idx];
|
|
port = control->ic_port[port_num].icp_port;
|
|
port->ip_all_ports[port_type_idx] = the_port;
|
|
|
|
DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n",
|
|
__FUNCTION__, (void *)the_port,
|
|
(void *)port,
|
|
port_type == PROTO_RS232 ? "rs232" : "rs422"));
|
|
|
|
/* membase, iobase and mapbase just need to be non-0 */
|
|
the_port->membase = (unsigned char __iomem *)1;
|
|
the_port->iobase = (pdev->bus->number << 16) | port_num;
|
|
the_port->line = (Num_of_ioc4_cards << 2) | port_num;
|
|
the_port->mapbase = port_type;
|
|
the_port->type = PORT_16550A;
|
|
the_port->fifosize = IOC4_FIFO_CHARS;
|
|
the_port->ops = &ioc4_ops;
|
|
the_port->irq = control->ic_irq;
|
|
the_port->dev = &pdev->dev;
|
|
spin_lock_init(&the_port->lock);
|
|
if (uart_add_one_port(u_driver, the_port) < 0) {
|
|
printk(KERN_WARNING
|
|
"%s: unable to add port %d bus %d\n",
|
|
__FUNCTION__, the_port->line, pdev->bus->number);
|
|
} else {
|
|
DPRINT_CONFIG(
|
|
("IOC4 serial port %d irq = %d, bus %d\n",
|
|
the_port->line, the_port->irq, pdev->bus->number));
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ioc4_serial_attach_one - register attach function
|
|
* called per card found from IOC4 master module.
|
|
* @idd: Master module data for this IOC4
|
|
*/
|
|
int
|
|
ioc4_serial_attach_one(struct ioc4_driver_data *idd)
|
|
{
|
|
unsigned long tmp_addr1;
|
|
struct ioc4_serial __iomem *serial;
|
|
struct ioc4_soft *soft;
|
|
struct ioc4_control *control;
|
|
int ret = 0;
|
|
|
|
|
|
DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev,
|
|
idd->idd_pci_id));
|
|
|
|
/* PCI-RT does not bring out serial connections.
|
|
* Do not attach to this particular IOC4.
|
|
*/
|
|
if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
|
|
return 0;
|
|
|
|
/* request serial registers */
|
|
tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET;
|
|
|
|
if (!request_region(tmp_addr1, sizeof(struct ioc4_serial),
|
|
"sioc4_uart")) {
|
|
printk(KERN_WARNING
|
|
"ioc4 (%p): unable to get request region for "
|
|
"uart space\n", (void *)idd->idd_pdev);
|
|
ret = -ENODEV;
|
|
goto out1;
|
|
}
|
|
serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial));
|
|
if (!serial) {
|
|
printk(KERN_WARNING
|
|
"ioc4 (%p) : unable to remap ioc4 serial register\n",
|
|
(void *)idd->idd_pdev);
|
|
ret = -ENODEV;
|
|
goto out2;
|
|
}
|
|
DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
|
|
__FUNCTION__, (void *)idd->idd_misc_regs,
|
|
(void *)serial));
|
|
|
|
/* Get memory for the new card */
|
|
control = kmalloc(sizeof(struct ioc4_control), GFP_KERNEL);
|
|
|
|
if (!control) {
|
|
printk(KERN_WARNING "ioc4_attach_one"
|
|
": unable to get memory for the IOC4\n");
|
|
ret = -ENOMEM;
|
|
goto out2;
|
|
}
|
|
memset(control, 0, sizeof(struct ioc4_control));
|
|
idd->idd_serial_data = control;
|
|
|
|
/* Allocate the soft structure */
|
|
soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
|
|
if (!soft) {
|
|
printk(KERN_WARNING
|
|
"ioc4 (%p): unable to get memory for the soft struct\n",
|
|
(void *)idd->idd_pdev);
|
|
ret = -ENOMEM;
|
|
goto out3;
|
|
}
|
|
memset(soft, 0, sizeof(struct ioc4_soft));
|
|
|
|
spin_lock_init(&soft->is_ir_lock);
|
|
soft->is_ioc4_misc_addr = idd->idd_misc_regs;
|
|
soft->is_ioc4_serial_addr = serial;
|
|
|
|
/* Init the IOC4 */
|
|
writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT,
|
|
&idd->idd_misc_regs->sio_cr.raw);
|
|
|
|
/* Enable serial port mode select generic PIO pins as outputs */
|
|
writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL
|
|
| IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL,
|
|
&idd->idd_misc_regs->gpcr_s.raw);
|
|
|
|
/* Clear and disable all serial interrupts */
|
|
write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
|
|
writel(~0, &idd->idd_misc_regs->sio_ir.raw);
|
|
write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC,
|
|
IOC4_OTHER_INTR_TYPE);
|
|
writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw);
|
|
control->ic_soft = soft;
|
|
|
|
/* Hook up interrupt handler */
|
|
if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED,
|
|
"sgi-ioc4serial", soft)) {
|
|
control->ic_irq = idd->idd_pdev->irq;
|
|
} else {
|
|
printk(KERN_WARNING
|
|
"%s : request_irq fails for IRQ 0x%x\n ",
|
|
__FUNCTION__, idd->idd_pdev->irq);
|
|
}
|
|
ret = ioc4_attach_local(idd);
|
|
if (ret)
|
|
goto out4;
|
|
|
|
/* register port with the serial core - 1 rs232, 1 rs422 */
|
|
|
|
if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232)))
|
|
goto out4;
|
|
|
|
if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422)))
|
|
goto out5;
|
|
|
|
Num_of_ioc4_cards++;
|
|
|
|
return ret;
|
|
|
|
/* error exits that give back resources */
|
|
out5:
|
|
ioc4_serial_remove_one(idd);
|
|
out4:
|
|
kfree(soft);
|
|
out3:
|
|
kfree(control);
|
|
out2:
|
|
if (serial)
|
|
iounmap(serial);
|
|
release_region(tmp_addr1, sizeof(struct ioc4_serial));
|
|
out1:
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static struct ioc4_submodule ioc4_serial_submodule = {
|
|
.is_name = "IOC4_serial",
|
|
.is_owner = THIS_MODULE,
|
|
.is_probe = ioc4_serial_attach_one,
|
|
.is_remove = ioc4_serial_remove_one,
|
|
};
|
|
|
|
/**
|
|
* ioc4_serial_init - module init
|
|
*/
|
|
int ioc4_serial_init(void)
|
|
{
|
|
int ret;
|
|
|
|
/* register with serial core */
|
|
if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) {
|
|
printk(KERN_WARNING
|
|
"%s: Couldn't register rs232 IOC4 serial driver\n",
|
|
__FUNCTION__);
|
|
return ret;
|
|
}
|
|
if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) {
|
|
printk(KERN_WARNING
|
|
"%s: Couldn't register rs422 IOC4 serial driver\n",
|
|
__FUNCTION__);
|
|
return ret;
|
|
}
|
|
|
|
/* register with IOC4 main module */
|
|
return ioc4_register_submodule(&ioc4_serial_submodule);
|
|
}
|
|
|
|
static void __devexit ioc4_serial_exit(void)
|
|
{
|
|
ioc4_unregister_submodule(&ioc4_serial_submodule);
|
|
uart_unregister_driver(&ioc4_uart_rs232);
|
|
uart_unregister_driver(&ioc4_uart_rs422);
|
|
}
|
|
|
|
late_initcall(ioc4_serial_init); /* Call only after tty init is done */
|
|
module_exit(ioc4_serial_exit);
|
|
|
|
MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
|
|
MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card");
|
|
MODULE_LICENSE("GPL");
|