mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 02:39:48 +00:00
![David Howells](/assets/img/avatar_default.png)
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
919 lines
23 KiB
C
919 lines
23 KiB
C
/*
|
|
* linux/drivers/char/sa1100.c
|
|
*
|
|
* Driver for SA11x0 serial ports
|
|
*
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* $Id: sa1100.c,v 1.50 2002/07/29 14:41:04 rmk Exp $
|
|
*
|
|
*/
|
|
|
|
#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/mach/serial_sa1100.h>
|
|
|
|
/* We've been assigned a range on the "Low-density serial ports" major */
|
|
#define SERIAL_SA1100_MAJOR 204
|
|
#define MINOR_START 5
|
|
|
|
#define NR_PORTS 3
|
|
|
|
#define SA1100_ISR_PASS_LIMIT 256
|
|
|
|
/*
|
|
* Convert from ignore_status_mask or read_status_mask to UTSR[01]
|
|
*/
|
|
#define SM_TO_UTSR0(x) ((x) & 0xff)
|
|
#define SM_TO_UTSR1(x) ((x) >> 8)
|
|
#define UTSR0_TO_SM(x) ((x))
|
|
#define UTSR1_TO_SM(x) ((x) << 8)
|
|
|
|
#define UART_GET_UTCR0(sport) __raw_readl((sport)->port.membase + UTCR0)
|
|
#define UART_GET_UTCR1(sport) __raw_readl((sport)->port.membase + UTCR1)
|
|
#define UART_GET_UTCR2(sport) __raw_readl((sport)->port.membase + UTCR2)
|
|
#define UART_GET_UTCR3(sport) __raw_readl((sport)->port.membase + UTCR3)
|
|
#define UART_GET_UTSR0(sport) __raw_readl((sport)->port.membase + UTSR0)
|
|
#define UART_GET_UTSR1(sport) __raw_readl((sport)->port.membase + UTSR1)
|
|
#define UART_GET_CHAR(sport) __raw_readl((sport)->port.membase + UTDR)
|
|
|
|
#define UART_PUT_UTCR0(sport,v) __raw_writel((v),(sport)->port.membase + UTCR0)
|
|
#define UART_PUT_UTCR1(sport,v) __raw_writel((v),(sport)->port.membase + UTCR1)
|
|
#define UART_PUT_UTCR2(sport,v) __raw_writel((v),(sport)->port.membase + UTCR2)
|
|
#define UART_PUT_UTCR3(sport,v) __raw_writel((v),(sport)->port.membase + UTCR3)
|
|
#define UART_PUT_UTSR0(sport,v) __raw_writel((v),(sport)->port.membase + UTSR0)
|
|
#define UART_PUT_UTSR1(sport,v) __raw_writel((v),(sport)->port.membase + UTSR1)
|
|
#define UART_PUT_CHAR(sport,v) __raw_writel((v),(sport)->port.membase + UTDR)
|
|
|
|
/*
|
|
* This is the size of our serial port register set.
|
|
*/
|
|
#define UART_PORT_SIZE 0x24
|
|
|
|
/*
|
|
* This determines how often we check the modem status signals
|
|
* for any change. They generally aren't connected to an IRQ
|
|
* so we have to poll them. We also check immediately before
|
|
* filling the TX fifo incase CTS has been dropped.
|
|
*/
|
|
#define MCTRL_TIMEOUT (250*HZ/1000)
|
|
|
|
struct sa1100_port {
|
|
struct uart_port port;
|
|
struct timer_list timer;
|
|
unsigned int old_status;
|
|
};
|
|
|
|
/*
|
|
* Handle any change of modem status signal since we were last called.
|
|
*/
|
|
static void sa1100_mctrl_check(struct sa1100_port *sport)
|
|
{
|
|
unsigned int status, changed;
|
|
|
|
status = sport->port.ops->get_mctrl(&sport->port);
|
|
changed = status ^ sport->old_status;
|
|
|
|
if (changed == 0)
|
|
return;
|
|
|
|
sport->old_status = status;
|
|
|
|
if (changed & TIOCM_RI)
|
|
sport->port.icount.rng++;
|
|
if (changed & TIOCM_DSR)
|
|
sport->port.icount.dsr++;
|
|
if (changed & TIOCM_CAR)
|
|
uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
|
|
if (changed & TIOCM_CTS)
|
|
uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
|
|
|
|
wake_up_interruptible(&sport->port.info->delta_msr_wait);
|
|
}
|
|
|
|
/*
|
|
* This is our per-port timeout handler, for checking the
|
|
* modem status signals.
|
|
*/
|
|
static void sa1100_timeout(unsigned long data)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)data;
|
|
unsigned long flags;
|
|
|
|
if (sport->port.info) {
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
sa1100_mctrl_check(sport);
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
|
|
mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* interrupts disabled on entry
|
|
*/
|
|
static void sa1100_stop_tx(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
u32 utcr3;
|
|
|
|
utcr3 = UART_GET_UTCR3(sport);
|
|
UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_TIE);
|
|
sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS);
|
|
}
|
|
|
|
/*
|
|
* port locked and interrupts disabled
|
|
*/
|
|
static void sa1100_start_tx(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
u32 utcr3;
|
|
|
|
utcr3 = UART_GET_UTCR3(sport);
|
|
sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS);
|
|
UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE);
|
|
}
|
|
|
|
/*
|
|
* Interrupts enabled
|
|
*/
|
|
static void sa1100_stop_rx(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
u32 utcr3;
|
|
|
|
utcr3 = UART_GET_UTCR3(sport);
|
|
UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_RIE);
|
|
}
|
|
|
|
/*
|
|
* Set the modem control timer to fire immediately.
|
|
*/
|
|
static void sa1100_enable_ms(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
|
|
mod_timer(&sport->timer, jiffies);
|
|
}
|
|
|
|
static void
|
|
sa1100_rx_chars(struct sa1100_port *sport)
|
|
{
|
|
struct tty_struct *tty = sport->port.info->tty;
|
|
unsigned int status, ch, flg;
|
|
|
|
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
|
|
UTSR0_TO_SM(UART_GET_UTSR0(sport));
|
|
while (status & UTSR1_TO_SM(UTSR1_RNE)) {
|
|
ch = UART_GET_CHAR(sport);
|
|
|
|
sport->port.icount.rx++;
|
|
|
|
flg = TTY_NORMAL;
|
|
|
|
/*
|
|
* note that the error handling code is
|
|
* out of the main execution path
|
|
*/
|
|
if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR)) {
|
|
if (status & UTSR1_TO_SM(UTSR1_PRE))
|
|
sport->port.icount.parity++;
|
|
else if (status & UTSR1_TO_SM(UTSR1_FRE))
|
|
sport->port.icount.frame++;
|
|
if (status & UTSR1_TO_SM(UTSR1_ROR))
|
|
sport->port.icount.overrun++;
|
|
|
|
status &= sport->port.read_status_mask;
|
|
|
|
if (status & UTSR1_TO_SM(UTSR1_PRE))
|
|
flg = TTY_PARITY;
|
|
else if (status & UTSR1_TO_SM(UTSR1_FRE))
|
|
flg = TTY_FRAME;
|
|
|
|
#ifdef SUPPORT_SYSRQ
|
|
sport->port.sysrq = 0;
|
|
#endif
|
|
}
|
|
|
|
if (uart_handle_sysrq_char(&sport->port, ch))
|
|
goto ignore_char;
|
|
|
|
uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg);
|
|
|
|
ignore_char:
|
|
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
|
|
UTSR0_TO_SM(UART_GET_UTSR0(sport));
|
|
}
|
|
tty_flip_buffer_push(tty);
|
|
}
|
|
|
|
static void sa1100_tx_chars(struct sa1100_port *sport)
|
|
{
|
|
struct circ_buf *xmit = &sport->port.info->xmit;
|
|
|
|
if (sport->port.x_char) {
|
|
UART_PUT_CHAR(sport, sport->port.x_char);
|
|
sport->port.icount.tx++;
|
|
sport->port.x_char = 0;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Check the modem control lines before
|
|
* transmitting anything.
|
|
*/
|
|
sa1100_mctrl_check(sport);
|
|
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
|
|
sa1100_stop_tx(&sport->port);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Tried using FIFO (not checking TNF) for fifo fill:
|
|
* still had the '4 bytes repeated' problem.
|
|
*/
|
|
while (UART_GET_UTSR1(sport) & UTSR1_TNF) {
|
|
UART_PUT_CHAR(sport, xmit->buf[xmit->tail]);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
sport->port.icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
}
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&sport->port);
|
|
|
|
if (uart_circ_empty(xmit))
|
|
sa1100_stop_tx(&sport->port);
|
|
}
|
|
|
|
static irqreturn_t sa1100_int(int irq, void *dev_id)
|
|
{
|
|
struct sa1100_port *sport = dev_id;
|
|
unsigned int status, pass_counter = 0;
|
|
|
|
spin_lock(&sport->port.lock);
|
|
status = UART_GET_UTSR0(sport);
|
|
status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS;
|
|
do {
|
|
if (status & (UTSR0_RFS | UTSR0_RID)) {
|
|
/* Clear the receiver idle bit, if set */
|
|
if (status & UTSR0_RID)
|
|
UART_PUT_UTSR0(sport, UTSR0_RID);
|
|
sa1100_rx_chars(sport);
|
|
}
|
|
|
|
/* Clear the relevant break bits */
|
|
if (status & (UTSR0_RBB | UTSR0_REB))
|
|
UART_PUT_UTSR0(sport, status & (UTSR0_RBB | UTSR0_REB));
|
|
|
|
if (status & UTSR0_RBB)
|
|
sport->port.icount.brk++;
|
|
|
|
if (status & UTSR0_REB)
|
|
uart_handle_break(&sport->port);
|
|
|
|
if (status & UTSR0_TFS)
|
|
sa1100_tx_chars(sport);
|
|
if (pass_counter++ > SA1100_ISR_PASS_LIMIT)
|
|
break;
|
|
status = UART_GET_UTSR0(sport);
|
|
status &= SM_TO_UTSR0(sport->port.read_status_mask) |
|
|
~UTSR0_TFS;
|
|
} while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID));
|
|
spin_unlock(&sport->port.lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Return TIOCSER_TEMT when transmitter is not busy.
|
|
*/
|
|
static unsigned int sa1100_tx_empty(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
|
|
return UART_GET_UTSR1(sport) & UTSR1_TBY ? 0 : TIOCSER_TEMT;
|
|
}
|
|
|
|
static unsigned int sa1100_get_mctrl(struct uart_port *port)
|
|
{
|
|
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
|
|
}
|
|
|
|
static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Interrupts always disabled.
|
|
*/
|
|
static void sa1100_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
unsigned long flags;
|
|
unsigned int utcr3;
|
|
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
utcr3 = UART_GET_UTCR3(sport);
|
|
if (break_state == -1)
|
|
utcr3 |= UTCR3_BRK;
|
|
else
|
|
utcr3 &= ~UTCR3_BRK;
|
|
UART_PUT_UTCR3(sport, utcr3);
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
}
|
|
|
|
static int sa1100_startup(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
int retval;
|
|
|
|
/*
|
|
* Allocate the IRQ
|
|
*/
|
|
retval = request_irq(sport->port.irq, sa1100_int, 0,
|
|
"sa11x0-uart", sport);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Finally, clear and enable interrupts
|
|
*/
|
|
UART_PUT_UTSR0(sport, -1);
|
|
UART_PUT_UTCR3(sport, UTCR3_RXE | UTCR3_TXE | UTCR3_RIE);
|
|
|
|
/*
|
|
* Enable modem status interrupts
|
|
*/
|
|
spin_lock_irq(&sport->port.lock);
|
|
sa1100_enable_ms(&sport->port);
|
|
spin_unlock_irq(&sport->port.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sa1100_shutdown(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
|
|
/*
|
|
* Stop our timer.
|
|
*/
|
|
del_timer_sync(&sport->timer);
|
|
|
|
/*
|
|
* Free the interrupt
|
|
*/
|
|
free_irq(sport->port.irq, sport);
|
|
|
|
/*
|
|
* Disable all interrupts, port and break condition.
|
|
*/
|
|
UART_PUT_UTCR3(sport, 0);
|
|
}
|
|
|
|
static void
|
|
sa1100_set_termios(struct uart_port *port, struct termios *termios,
|
|
struct termios *old)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
unsigned long flags;
|
|
unsigned int utcr0, old_utcr3, baud, quot;
|
|
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
|
|
|
|
/*
|
|
* We only support CS7 and CS8.
|
|
*/
|
|
while ((termios->c_cflag & CSIZE) != CS7 &&
|
|
(termios->c_cflag & CSIZE) != CS8) {
|
|
termios->c_cflag &= ~CSIZE;
|
|
termios->c_cflag |= old_csize;
|
|
old_csize = CS8;
|
|
}
|
|
|
|
if ((termios->c_cflag & CSIZE) == CS8)
|
|
utcr0 = UTCR0_DSS;
|
|
else
|
|
utcr0 = 0;
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
utcr0 |= UTCR0_SBS;
|
|
if (termios->c_cflag & PARENB) {
|
|
utcr0 |= UTCR0_PE;
|
|
if (!(termios->c_cflag & PARODD))
|
|
utcr0 |= UTCR0_OES;
|
|
}
|
|
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
spin_lock_irqsave(&sport->port.lock, flags);
|
|
|
|
sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS);
|
|
sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR);
|
|
if (termios->c_iflag & INPCK)
|
|
sport->port.read_status_mask |=
|
|
UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE);
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
sport->port.read_status_mask |=
|
|
UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB);
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
sport->port.ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
sport->port.ignore_status_mask |=
|
|
UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE);
|
|
if (termios->c_iflag & IGNBRK) {
|
|
sport->port.ignore_status_mask |=
|
|
UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB);
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
sport->port.ignore_status_mask |=
|
|
UTSR1_TO_SM(UTSR1_ROR);
|
|
}
|
|
|
|
del_timer_sync(&sport->timer);
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
/*
|
|
* disable interrupts and drain transmitter
|
|
*/
|
|
old_utcr3 = UART_GET_UTCR3(sport);
|
|
UART_PUT_UTCR3(sport, old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE));
|
|
|
|
while (UART_GET_UTSR1(sport) & UTSR1_TBY)
|
|
barrier();
|
|
|
|
/* then, disable everything */
|
|
UART_PUT_UTCR3(sport, 0);
|
|
|
|
/* set the parity, stop bits and data size */
|
|
UART_PUT_UTCR0(sport, utcr0);
|
|
|
|
/* set the baud rate */
|
|
quot -= 1;
|
|
UART_PUT_UTCR1(sport, ((quot & 0xf00) >> 8));
|
|
UART_PUT_UTCR2(sport, (quot & 0xff));
|
|
|
|
UART_PUT_UTSR0(sport, -1);
|
|
|
|
UART_PUT_UTCR3(sport, old_utcr3);
|
|
|
|
if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
|
|
sa1100_enable_ms(&sport->port);
|
|
|
|
spin_unlock_irqrestore(&sport->port.lock, flags);
|
|
}
|
|
|
|
static const char *sa1100_type(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
|
|
return sport->port.type == PORT_SA1100 ? "SA1100" : NULL;
|
|
}
|
|
|
|
/*
|
|
* Release the memory region(s) being used by 'port'.
|
|
*/
|
|
static void sa1100_release_port(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
|
|
release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
|
|
}
|
|
|
|
/*
|
|
* Request the memory region(s) being used by 'port'.
|
|
*/
|
|
static int sa1100_request_port(struct uart_port *port)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
|
|
return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
|
|
"sa11x0-uart") != NULL ? 0 : -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Configure/autoconfigure the port.
|
|
*/
|
|
static void sa1100_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
|
|
if (flags & UART_CONFIG_TYPE &&
|
|
sa1100_request_port(&sport->port) == 0)
|
|
sport->port.type = PORT_SA1100;
|
|
}
|
|
|
|
/*
|
|
* Verify the new serial_struct (for TIOCSSERIAL).
|
|
* The only change we allow are to the flags and type, and
|
|
* even then only between PORT_SA1100 and PORT_UNKNOWN
|
|
*/
|
|
static int
|
|
sa1100_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
int ret = 0;
|
|
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_SA1100)
|
|
ret = -EINVAL;
|
|
if (sport->port.irq != ser->irq)
|
|
ret = -EINVAL;
|
|
if (ser->io_type != SERIAL_IO_MEM)
|
|
ret = -EINVAL;
|
|
if (sport->port.uartclk / 16 != ser->baud_base)
|
|
ret = -EINVAL;
|
|
if ((void *)sport->port.mapbase != ser->iomem_base)
|
|
ret = -EINVAL;
|
|
if (sport->port.iobase != ser->port)
|
|
ret = -EINVAL;
|
|
if (ser->hub6 != 0)
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
static struct uart_ops sa1100_pops = {
|
|
.tx_empty = sa1100_tx_empty,
|
|
.set_mctrl = sa1100_set_mctrl,
|
|
.get_mctrl = sa1100_get_mctrl,
|
|
.stop_tx = sa1100_stop_tx,
|
|
.start_tx = sa1100_start_tx,
|
|
.stop_rx = sa1100_stop_rx,
|
|
.enable_ms = sa1100_enable_ms,
|
|
.break_ctl = sa1100_break_ctl,
|
|
.startup = sa1100_startup,
|
|
.shutdown = sa1100_shutdown,
|
|
.set_termios = sa1100_set_termios,
|
|
.type = sa1100_type,
|
|
.release_port = sa1100_release_port,
|
|
.request_port = sa1100_request_port,
|
|
.config_port = sa1100_config_port,
|
|
.verify_port = sa1100_verify_port,
|
|
};
|
|
|
|
static struct sa1100_port sa1100_ports[NR_PORTS];
|
|
|
|
/*
|
|
* Setup the SA1100 serial ports. Note that we don't include the IrDA
|
|
* port here since we have our own SIR/FIR driver (see drivers/net/irda)
|
|
*
|
|
* Note also that we support "console=ttySAx" where "x" is either 0 or 1.
|
|
* Which serial port this ends up being depends on the machine you're
|
|
* running this kernel on. I'm not convinced that this is a good idea,
|
|
* but that's the way it traditionally works.
|
|
*
|
|
* Note that NanoEngine UART3 becomes UART2, and UART2 is no longer
|
|
* used here.
|
|
*/
|
|
static void __init sa1100_init_ports(void)
|
|
{
|
|
static int first = 1;
|
|
int i;
|
|
|
|
if (!first)
|
|
return;
|
|
first = 0;
|
|
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
sa1100_ports[i].port.uartclk = 3686400;
|
|
sa1100_ports[i].port.ops = &sa1100_pops;
|
|
sa1100_ports[i].port.fifosize = 8;
|
|
sa1100_ports[i].port.line = i;
|
|
sa1100_ports[i].port.iotype = UPIO_MEM;
|
|
init_timer(&sa1100_ports[i].timer);
|
|
sa1100_ports[i].timer.function = sa1100_timeout;
|
|
sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i];
|
|
}
|
|
|
|
/*
|
|
* make transmit lines outputs, so that when the port
|
|
* is closed, the output is in the MARK state.
|
|
*/
|
|
PPDR |= PPC_TXD1 | PPC_TXD3;
|
|
PPSR |= PPC_TXD1 | PPC_TXD3;
|
|
}
|
|
|
|
void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns)
|
|
{
|
|
if (fns->get_mctrl)
|
|
sa1100_pops.get_mctrl = fns->get_mctrl;
|
|
if (fns->set_mctrl)
|
|
sa1100_pops.set_mctrl = fns->set_mctrl;
|
|
|
|
sa1100_pops.pm = fns->pm;
|
|
sa1100_pops.set_wake = fns->set_wake;
|
|
}
|
|
|
|
void __init sa1100_register_uart(int idx, int port)
|
|
{
|
|
if (idx >= NR_PORTS) {
|
|
printk(KERN_ERR "%s: bad index number %d\n", __FUNCTION__, idx);
|
|
return;
|
|
}
|
|
|
|
switch (port) {
|
|
case 1:
|
|
sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0;
|
|
sa1100_ports[idx].port.mapbase = _Ser1UTCR0;
|
|
sa1100_ports[idx].port.irq = IRQ_Ser1UART;
|
|
sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
|
|
break;
|
|
|
|
case 2:
|
|
sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0;
|
|
sa1100_ports[idx].port.mapbase = _Ser2UTCR0;
|
|
sa1100_ports[idx].port.irq = IRQ_Ser2ICP;
|
|
sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
|
|
break;
|
|
|
|
case 3:
|
|
sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0;
|
|
sa1100_ports[idx].port.mapbase = _Ser3UTCR0;
|
|
sa1100_ports[idx].port.irq = IRQ_Ser3UART;
|
|
sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "%s: bad port number %d\n", __FUNCTION__, port);
|
|
}
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_SERIAL_SA1100_CONSOLE
|
|
static void sa1100_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct sa1100_port *sport = (struct sa1100_port *)port;
|
|
|
|
while (!(UART_GET_UTSR1(sport) & UTSR1_TNF))
|
|
barrier();
|
|
UART_PUT_CHAR(sport, ch);
|
|
}
|
|
|
|
/*
|
|
* Interrupts are disabled on entering
|
|
*/
|
|
static void
|
|
sa1100_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct sa1100_port *sport = &sa1100_ports[co->index];
|
|
unsigned int old_utcr3, status;
|
|
|
|
/*
|
|
* First, save UTCR3 and then disable interrupts
|
|
*/
|
|
old_utcr3 = UART_GET_UTCR3(sport);
|
|
UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) |
|
|
UTCR3_TXE);
|
|
|
|
uart_console_write(&sport->port, s, count, sa1100_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore UTCR3
|
|
*/
|
|
do {
|
|
status = UART_GET_UTSR1(sport);
|
|
} while (status & UTSR1_TBY);
|
|
UART_PUT_UTCR3(sport, old_utcr3);
|
|
}
|
|
|
|
/*
|
|
* If the port was already initialised (eg, by a boot loader),
|
|
* try to determine the current setup.
|
|
*/
|
|
static void __init
|
|
sa1100_console_get_options(struct sa1100_port *sport, int *baud,
|
|
int *parity, int *bits)
|
|
{
|
|
unsigned int utcr3;
|
|
|
|
utcr3 = UART_GET_UTCR3(sport) & (UTCR3_RXE | UTCR3_TXE);
|
|
if (utcr3 == (UTCR3_RXE | UTCR3_TXE)) {
|
|
/* ok, the port was enabled */
|
|
unsigned int utcr0, quot;
|
|
|
|
utcr0 = UART_GET_UTCR0(sport);
|
|
|
|
*parity = 'n';
|
|
if (utcr0 & UTCR0_PE) {
|
|
if (utcr0 & UTCR0_OES)
|
|
*parity = 'e';
|
|
else
|
|
*parity = 'o';
|
|
}
|
|
|
|
if (utcr0 & UTCR0_DSS)
|
|
*bits = 8;
|
|
else
|
|
*bits = 7;
|
|
|
|
quot = UART_GET_UTCR2(sport) | UART_GET_UTCR1(sport) << 8;
|
|
quot &= 0xfff;
|
|
*baud = sport->port.uartclk / (16 * (quot + 1));
|
|
}
|
|
}
|
|
|
|
static int __init
|
|
sa1100_console_setup(struct console *co, char *options)
|
|
{
|
|
struct sa1100_port *sport;
|
|
int baud = 9600;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
/*
|
|
* Check whether an invalid uart number has been specified, and
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
if (co->index == -1 || co->index >= NR_PORTS)
|
|
co->index = 0;
|
|
sport = &sa1100_ports[co->index];
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
else
|
|
sa1100_console_get_options(sport, &baud, &parity, &bits);
|
|
|
|
return uart_set_options(&sport->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct uart_driver sa1100_reg;
|
|
static struct console sa1100_console = {
|
|
.name = "ttySA",
|
|
.write = sa1100_console_write,
|
|
.device = uart_console_device,
|
|
.setup = sa1100_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &sa1100_reg,
|
|
};
|
|
|
|
static int __init sa1100_rs_console_init(void)
|
|
{
|
|
sa1100_init_ports();
|
|
register_console(&sa1100_console);
|
|
return 0;
|
|
}
|
|
console_initcall(sa1100_rs_console_init);
|
|
|
|
#define SA1100_CONSOLE &sa1100_console
|
|
#else
|
|
#define SA1100_CONSOLE NULL
|
|
#endif
|
|
|
|
static struct uart_driver sa1100_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "ttySA",
|
|
.dev_name = "ttySA",
|
|
.major = SERIAL_SA1100_MAJOR,
|
|
.minor = MINOR_START,
|
|
.nr = NR_PORTS,
|
|
.cons = SA1100_CONSOLE,
|
|
};
|
|
|
|
static int sa1100_serial_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct sa1100_port *sport = platform_get_drvdata(dev);
|
|
|
|
if (sport)
|
|
uart_suspend_port(&sa1100_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_serial_resume(struct platform_device *dev)
|
|
{
|
|
struct sa1100_port *sport = platform_get_drvdata(dev);
|
|
|
|
if (sport)
|
|
uart_resume_port(&sa1100_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_serial_probe(struct platform_device *dev)
|
|
{
|
|
struct resource *res = dev->resource;
|
|
int i;
|
|
|
|
for (i = 0; i < dev->num_resources; i++, res++)
|
|
if (res->flags & IORESOURCE_MEM)
|
|
break;
|
|
|
|
if (i < dev->num_resources) {
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
if (sa1100_ports[i].port.mapbase != res->start)
|
|
continue;
|
|
|
|
sa1100_ports[i].port.dev = &dev->dev;
|
|
uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port);
|
|
platform_set_drvdata(dev, &sa1100_ports[i]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_serial_remove(struct platform_device *pdev)
|
|
{
|
|
struct sa1100_port *sport = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
if (sport)
|
|
uart_remove_one_port(&sa1100_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sa11x0_serial_driver = {
|
|
.probe = sa1100_serial_probe,
|
|
.remove = sa1100_serial_remove,
|
|
.suspend = sa1100_serial_suspend,
|
|
.resume = sa1100_serial_resume,
|
|
.driver = {
|
|
.name = "sa11x0-uart",
|
|
},
|
|
};
|
|
|
|
static int __init sa1100_serial_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "Serial: SA11x0 driver $Revision: 1.50 $\n");
|
|
|
|
sa1100_init_ports();
|
|
|
|
ret = uart_register_driver(&sa1100_reg);
|
|
if (ret == 0) {
|
|
ret = platform_driver_register(&sa11x0_serial_driver);
|
|
if (ret)
|
|
uart_unregister_driver(&sa1100_reg);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void __exit sa1100_serial_exit(void)
|
|
{
|
|
platform_driver_unregister(&sa11x0_serial_driver);
|
|
uart_unregister_driver(&sa1100_reg);
|
|
}
|
|
|
|
module_init(sa1100_serial_init);
|
|
module_exit(sa1100_serial_exit);
|
|
|
|
MODULE_AUTHOR("Deep Blue Solutions Ltd");
|
|
MODULE_DESCRIPTION("SA1100 generic serial port driver $Revision: 1.50 $");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR);
|