linux-stable/include/linux/platform_data/dma-dw.h
Andy Shevchenko 199244d694 dmaengine: dw: add support of iDMA 32-bit hardware
iDMA 32-bit is Intel designed DMA controller that behaves like Synopsys
Designware DMA. This patch adds a support of the new Intel hardware.

Due to iDMA 32-bit has no autoconfiguration the platform code must
provide a platform data to dw_dma_probe().

By default full FIFO (1024 bytes) is assigned to channel 0. Here we
slice FIFO on equal parts between channels for iDMA 32-bit case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-25 11:51:40 +05:30

70 lines
2.4 KiB
C

/*
* Driver for the Synopsys DesignWare DMA Controller
*
* Copyright (C) 2007 Atmel Corporation
* Copyright (C) 2010-2011 ST Microelectronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _PLATFORM_DATA_DMA_DW_H
#define _PLATFORM_DATA_DMA_DW_H
#include <linux/device.h>
#define DW_DMA_MAX_NR_MASTERS 4
#define DW_DMA_MAX_NR_CHANNELS 8
/**
* struct dw_dma_slave - Controller-specific information about a slave
*
* @dma_dev: required DMA master device
* @src_id: src request line
* @dst_id: dst request line
* @m_master: memory master for transfers on allocated channel
* @p_master: peripheral master for transfers on allocated channel
* @hs_polarity:set active low polarity of handshake interface
*/
struct dw_dma_slave {
struct device *dma_dev;
u8 src_id;
u8 dst_id;
u8 m_master;
u8 p_master;
bool hs_polarity;
};
/**
* struct dw_dma_platform_data - Controller configuration parameters
* @nr_channels: Number of channels supported by hardware (max 8)
* @is_private: The device channels should be marked as private and not for
* by the general purpose DMA channel allocator.
* @is_memcpy: The device channels do support memory-to-memory transfers.
* @is_idma32: The type of the DMA controller is iDMA32
* @chan_allocation_order: Allocate channels starting from 0 or 7
* @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
* @block_size: Maximum block size supported by the controller
* @nr_masters: Number of AHB masters supported by the controller
* @data_width: Maximum data width supported by hardware per AHB master
* (in bytes, power of 2)
* @multi_block: Multi block transfers supported by hardware per channel.
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
bool is_private;
bool is_memcpy;
bool is_idma32;
#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */
unsigned char chan_allocation_order;
#define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */
#define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */
unsigned char chan_priority;
unsigned int block_size;
unsigned char nr_masters;
unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
unsigned char multi_block[DW_DMA_MAX_NR_CHANNELS];
};
#endif /* _PLATFORM_DATA_DMA_DW_H */