mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Baolin Wang](/assets/img/avatar_default.png)
The Spreadtrum debounce EIC and latch EIC can not support edge trigger, but most GPIO users (like gpio-key driver) only use the edge trigger, thus the EIC driver need add some support to emulate the edge trigger to satisfy this requirement. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
679 lines
18 KiB
C
679 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Spreadtrum Communications Inc.
|
|
* Copyright (C) 2018 Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
/* EIC registers definition */
|
|
#define SPRD_EIC_DBNC_DATA 0x0
|
|
#define SPRD_EIC_DBNC_DMSK 0x4
|
|
#define SPRD_EIC_DBNC_IEV 0x14
|
|
#define SPRD_EIC_DBNC_IE 0x18
|
|
#define SPRD_EIC_DBNC_RIS 0x1c
|
|
#define SPRD_EIC_DBNC_MIS 0x20
|
|
#define SPRD_EIC_DBNC_IC 0x24
|
|
#define SPRD_EIC_DBNC_TRIG 0x28
|
|
#define SPRD_EIC_DBNC_CTRL0 0x40
|
|
|
|
#define SPRD_EIC_LATCH_INTEN 0x0
|
|
#define SPRD_EIC_LATCH_INTRAW 0x4
|
|
#define SPRD_EIC_LATCH_INTMSK 0x8
|
|
#define SPRD_EIC_LATCH_INTCLR 0xc
|
|
#define SPRD_EIC_LATCH_INTPOL 0x10
|
|
#define SPRD_EIC_LATCH_INTMODE 0x14
|
|
|
|
#define SPRD_EIC_ASYNC_INTIE 0x0
|
|
#define SPRD_EIC_ASYNC_INTRAW 0x4
|
|
#define SPRD_EIC_ASYNC_INTMSK 0x8
|
|
#define SPRD_EIC_ASYNC_INTCLR 0xc
|
|
#define SPRD_EIC_ASYNC_INTMODE 0x10
|
|
#define SPRD_EIC_ASYNC_INTBOTH 0x14
|
|
#define SPRD_EIC_ASYNC_INTPOL 0x18
|
|
#define SPRD_EIC_ASYNC_DATA 0x1c
|
|
|
|
#define SPRD_EIC_SYNC_INTIE 0x0
|
|
#define SPRD_EIC_SYNC_INTRAW 0x4
|
|
#define SPRD_EIC_SYNC_INTMSK 0x8
|
|
#define SPRD_EIC_SYNC_INTCLR 0xc
|
|
#define SPRD_EIC_SYNC_INTMODE 0x10
|
|
#define SPRD_EIC_SYNC_INTBOTH 0x14
|
|
#define SPRD_EIC_SYNC_INTPOL 0x18
|
|
#define SPRD_EIC_SYNC_DATA 0x1c
|
|
|
|
/*
|
|
* The digital-chip EIC controller can support maximum 3 banks, and each bank
|
|
* contains 8 EICs.
|
|
*/
|
|
#define SPRD_EIC_MAX_BANK 3
|
|
#define SPRD_EIC_PER_BANK_NR 8
|
|
#define SPRD_EIC_DATA_MASK GENMASK(7, 0)
|
|
#define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1))
|
|
#define SPRD_EIC_DBNC_MASK GENMASK(11, 0)
|
|
|
|
/*
|
|
* The Spreadtrum EIC (external interrupt controller) can be used only in
|
|
* input mode to generate interrupts if detecting input signals.
|
|
*
|
|
* The Spreadtrum digital-chip EIC controller contains 4 sub-modules:
|
|
* debounce EIC, latch EIC, async EIC and sync EIC,
|
|
*
|
|
* The debounce EIC is used to capture the input signals' stable status
|
|
* (millisecond resolution) and a single-trigger mechanism is introduced
|
|
* into this sub-module to enhance the input event detection reliability.
|
|
* The debounce range is from 1ms to 4s with a step size of 1ms.
|
|
*
|
|
* The latch EIC is used to latch some special power down signals and
|
|
* generate interrupts, since the latch EIC does not depend on the APB clock
|
|
* to capture signals.
|
|
*
|
|
* The async EIC uses a 32k clock to capture the short signals (microsecond
|
|
* resolution) to generate interrupts by level or edge trigger.
|
|
*
|
|
* The EIC-sync is similar with GPIO's input function, which is a synchronized
|
|
* signal input register.
|
|
*/
|
|
enum sprd_eic_type {
|
|
SPRD_EIC_DEBOUNCE,
|
|
SPRD_EIC_LATCH,
|
|
SPRD_EIC_ASYNC,
|
|
SPRD_EIC_SYNC,
|
|
SPRD_EIC_MAX,
|
|
};
|
|
|
|
struct sprd_eic {
|
|
struct gpio_chip chip;
|
|
struct irq_chip intc;
|
|
void __iomem *base[SPRD_EIC_MAX_BANK];
|
|
enum sprd_eic_type type;
|
|
spinlock_t lock;
|
|
int irq;
|
|
};
|
|
|
|
struct sprd_eic_variant_data {
|
|
enum sprd_eic_type type;
|
|
u32 num_eics;
|
|
};
|
|
|
|
static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
|
|
"eic-debounce", "eic-latch", "eic-async",
|
|
"eic-sync",
|
|
};
|
|
|
|
static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
|
|
.type = SPRD_EIC_DEBOUNCE,
|
|
.num_eics = 8,
|
|
};
|
|
|
|
static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
|
|
.type = SPRD_EIC_LATCH,
|
|
.num_eics = 8,
|
|
};
|
|
|
|
static const struct sprd_eic_variant_data sc9860_eic_async_data = {
|
|
.type = SPRD_EIC_ASYNC,
|
|
.num_eics = 8,
|
|
};
|
|
|
|
static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
|
|
.type = SPRD_EIC_SYNC,
|
|
.num_eics = 8,
|
|
};
|
|
|
|
static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
|
|
unsigned int bank)
|
|
{
|
|
if (bank >= SPRD_EIC_MAX_BANK)
|
|
return NULL;
|
|
|
|
return sprd_eic->base[bank];
|
|
}
|
|
|
|
static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset,
|
|
u16 reg, unsigned int val)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
void __iomem *base =
|
|
sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
|
|
unsigned long flags;
|
|
u32 tmp;
|
|
|
|
spin_lock_irqsave(&sprd_eic->lock, flags);
|
|
tmp = readl_relaxed(base + reg);
|
|
|
|
if (val)
|
|
tmp |= BIT(SPRD_EIC_BIT(offset));
|
|
else
|
|
tmp &= ~BIT(SPRD_EIC_BIT(offset));
|
|
|
|
writel_relaxed(tmp, base + reg);
|
|
spin_unlock_irqrestore(&sprd_eic->lock, flags);
|
|
}
|
|
|
|
static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
void __iomem *base =
|
|
sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
|
|
|
|
return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset)));
|
|
}
|
|
|
|
static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1);
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0);
|
|
}
|
|
|
|
static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA);
|
|
}
|
|
|
|
static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
/* EICs are always input, nothing need to do here. */
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value)
|
|
{
|
|
/* EICs are always input, nothing need to do here. */
|
|
}
|
|
|
|
static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
|
|
unsigned int debounce)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
void __iomem *base =
|
|
sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
|
|
u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4;
|
|
u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
|
|
|
|
value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
|
|
writel_relaxed(value, base + reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset,
|
|
unsigned long config)
|
|
{
|
|
unsigned long param = pinconf_to_config_param(config);
|
|
u32 arg = pinconf_to_config_argument(config);
|
|
|
|
if (param == PIN_CONFIG_INPUT_DEBOUNCE)
|
|
return sprd_eic_set_debounce(chip, offset, arg);
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static void sprd_eic_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0);
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0);
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0);
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
}
|
|
}
|
|
|
|
static void sprd_eic_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1);
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1);
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1);
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
}
|
|
}
|
|
|
|
static void sprd_eic_irq_ack(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
}
|
|
}
|
|
|
|
static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
int state;
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
state = sprd_eic_get(chip, offset);
|
|
if (state)
|
|
sprd_eic_update(chip, offset,
|
|
SPRD_EIC_DBNC_IEV, 0);
|
|
else
|
|
sprd_eic_update(chip, offset,
|
|
SPRD_EIC_DBNC_IEV, 1);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
state = sprd_eic_get(chip, offset);
|
|
if (state)
|
|
sprd_eic_update(chip, offset,
|
|
SPRD_EIC_LATCH_INTPOL, 0);
|
|
else
|
|
sprd_eic_update(chip, offset,
|
|
SPRD_EIC_LATCH_INTPOL, 1);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
|
|
unsigned int offset)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
struct irq_data *data = irq_get_irq_data(irq);
|
|
u32 trigger = irqd_get_trigger_type(data);
|
|
int state, post_state;
|
|
|
|
/*
|
|
* The debounce EIC and latch EIC can only support level trigger, so we
|
|
* can toggle the level trigger to emulate the edge trigger.
|
|
*/
|
|
if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
|
|
sprd_eic->type != SPRD_EIC_LATCH) ||
|
|
!(trigger & IRQ_TYPE_EDGE_BOTH))
|
|
return;
|
|
|
|
sprd_eic_irq_mask(data);
|
|
state = sprd_eic_get(chip, offset);
|
|
|
|
retry:
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
if (state)
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
|
|
else
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
if (state)
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
|
|
else
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
|
|
break;
|
|
default:
|
|
sprd_eic_irq_unmask(data);
|
|
return;
|
|
}
|
|
|
|
post_state = sprd_eic_get(chip, offset);
|
|
if (state != post_state) {
|
|
dev_warn(chip->parent, "EIC level was changed.\n");
|
|
state = post_state;
|
|
goto retry;
|
|
}
|
|
|
|
sprd_eic_irq_unmask(data);
|
|
}
|
|
|
|
static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data)
|
|
{
|
|
enum sprd_eic_type type = *(enum sprd_eic_type *)data;
|
|
|
|
return !strcmp(chip->label, sprd_eic_label_name[type]);
|
|
}
|
|
|
|
static void sprd_eic_handle_one_type(struct gpio_chip *chip)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 bank, n, girq;
|
|
|
|
for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) {
|
|
void __iomem *base = sprd_eic_offset_base(sprd_eic, bank);
|
|
unsigned long reg;
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) &
|
|
SPRD_EIC_DATA_MASK;
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) &
|
|
SPRD_EIC_DATA_MASK;
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) &
|
|
SPRD_EIC_DATA_MASK;
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) &
|
|
SPRD_EIC_DATA_MASK;
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
return;
|
|
}
|
|
|
|
for_each_set_bit(n, ®, SPRD_EIC_PER_BANK_NR) {
|
|
girq = irq_find_mapping(chip->irq.domain,
|
|
bank * SPRD_EIC_PER_BANK_NR + n);
|
|
|
|
generic_handle_irq(girq);
|
|
sprd_eic_toggle_trigger(chip, girq, n);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void sprd_eic_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct irq_chip *ic = irq_desc_get_chip(desc);
|
|
struct gpio_chip *chip;
|
|
enum sprd_eic_type type;
|
|
|
|
chained_irq_enter(ic, desc);
|
|
|
|
/*
|
|
* Since the digital-chip EIC 4 sub-modules (debounce, latch, async
|
|
* and sync) share one same interrupt line, we should iterate each
|
|
* EIC module to check if there are EIC interrupts were triggered.
|
|
*/
|
|
for (type = SPRD_EIC_DEBOUNCE; type < SPRD_EIC_MAX; type++) {
|
|
chip = gpiochip_find(&type, sprd_eic_match_chip_by_type);
|
|
if (!chip)
|
|
continue;
|
|
|
|
sprd_eic_handle_one_type(chip);
|
|
}
|
|
|
|
chained_irq_exit(ic, desc);
|
|
}
|
|
|
|
static int sprd_eic_probe(struct platform_device *pdev)
|
|
{
|
|
const struct sprd_eic_variant_data *pdata;
|
|
struct gpio_irq_chip *irq;
|
|
struct sprd_eic *sprd_eic;
|
|
struct resource *res;
|
|
int ret, i;
|
|
|
|
pdata = of_device_get_match_data(&pdev->dev);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "No matching driver data found.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
sprd_eic = devm_kzalloc(&pdev->dev, sizeof(*sprd_eic), GFP_KERNEL);
|
|
if (!sprd_eic)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&sprd_eic->lock);
|
|
sprd_eic->type = pdata->type;
|
|
|
|
sprd_eic->irq = platform_get_irq(pdev, 0);
|
|
if (sprd_eic->irq < 0) {
|
|
dev_err(&pdev->dev, "Failed to get EIC interrupt.\n");
|
|
return sprd_eic->irq;
|
|
}
|
|
|
|
for (i = 0; i < SPRD_EIC_MAX_BANK; i++) {
|
|
/*
|
|
* We can have maximum 3 banks EICs, and each EIC has
|
|
* its own base address. But some platform maybe only
|
|
* have one bank EIC, thus base[1] and base[2] can be
|
|
* optional.
|
|
*/
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
|
|
if (!res)
|
|
continue;
|
|
|
|
sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(sprd_eic->base[i]))
|
|
return PTR_ERR(sprd_eic->base[i]);
|
|
}
|
|
|
|
sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
|
|
sprd_eic->chip.ngpio = pdata->num_eics;
|
|
sprd_eic->chip.base = -1;
|
|
sprd_eic->chip.parent = &pdev->dev;
|
|
sprd_eic->chip.of_node = pdev->dev.of_node;
|
|
sprd_eic->chip.direction_input = sprd_eic_direction_input;
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
sprd_eic->chip.request = sprd_eic_request;
|
|
sprd_eic->chip.free = sprd_eic_free;
|
|
sprd_eic->chip.set_config = sprd_eic_set_config;
|
|
sprd_eic->chip.set = sprd_eic_set;
|
|
/* fall-through */
|
|
case SPRD_EIC_ASYNC:
|
|
/* fall-through */
|
|
case SPRD_EIC_SYNC:
|
|
sprd_eic->chip.get = sprd_eic_get;
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
/* fall-through */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
sprd_eic->intc.name = dev_name(&pdev->dev);
|
|
sprd_eic->intc.irq_ack = sprd_eic_irq_ack;
|
|
sprd_eic->intc.irq_mask = sprd_eic_irq_mask;
|
|
sprd_eic->intc.irq_unmask = sprd_eic_irq_unmask;
|
|
sprd_eic->intc.irq_set_type = sprd_eic_irq_set_type;
|
|
sprd_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
|
|
|
|
irq = &sprd_eic->chip.irq;
|
|
irq->chip = &sprd_eic->intc;
|
|
irq->handler = handle_bad_irq;
|
|
irq->default_type = IRQ_TYPE_NONE;
|
|
irq->parent_handler = sprd_eic_irq_handler;
|
|
irq->parent_handler_data = sprd_eic;
|
|
irq->num_parents = 1;
|
|
irq->parents = &sprd_eic->irq;
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &sprd_eic->chip, sprd_eic);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, sprd_eic);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sprd_eic_of_match[] = {
|
|
{
|
|
.compatible = "sprd,sc9860-eic-debounce",
|
|
.data = &sc9860_eic_dbnc_data,
|
|
},
|
|
{
|
|
.compatible = "sprd,sc9860-eic-latch",
|
|
.data = &sc9860_eic_latch_data,
|
|
},
|
|
{
|
|
.compatible = "sprd,sc9860-eic-async",
|
|
.data = &sc9860_eic_async_data,
|
|
},
|
|
{
|
|
.compatible = "sprd,sc9860-eic-sync",
|
|
.data = &sc9860_eic_sync_data,
|
|
},
|
|
{
|
|
/* end of list */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sprd_eic_of_match);
|
|
|
|
static struct platform_driver sprd_eic_driver = {
|
|
.probe = sprd_eic_probe,
|
|
.driver = {
|
|
.name = "sprd-eic",
|
|
.of_match_table = sprd_eic_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sprd_eic_driver);
|
|
|
|
MODULE_DESCRIPTION("Spreadtrum EIC driver");
|
|
MODULE_LICENSE("GPL v2");
|