mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 11:19:37 +00:00
![Kuninori Morimoto](/assets/img/avatar_default.png)
ALSA SoC merges DAI call backs into .ops. This patch merge these into one. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87jzu5b0ue.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
1745 lines
48 KiB
C
1745 lines
48 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Freescale SSI ALSA SoC Digital Audio Interface (DAI) driver
|
|
//
|
|
// Author: Timur Tabi <timur@freescale.com>
|
|
//
|
|
// Copyright 2007-2010 Freescale Semiconductor, Inc.
|
|
//
|
|
// Some notes why imx-pcm-fiq is used instead of DMA on some boards:
|
|
//
|
|
// The i.MX SSI core has some nasty limitations in AC97 mode. While most
|
|
// sane processor vendors have a FIFO per AC97 slot, the i.MX has only
|
|
// one FIFO which combines all valid receive slots. We cannot even select
|
|
// which slots we want to receive. The WM9712 with which this driver
|
|
// was developed with always sends GPIO status data in slot 12 which
|
|
// we receive in our (PCM-) data stream. The only chance we have is to
|
|
// manually skip this data in the FIQ handler. With sampling rates different
|
|
// from 48000Hz not every frame has valid receive data, so the ratio
|
|
// between pcm data and GPIO status data changes. Our FIQ handler is not
|
|
// able to handle this, hence this driver only works with 48000Hz sampling
|
|
// rate.
|
|
// Reading and writing AC97 registers is another challenge. The core
|
|
// provides us status bits when the read register is updated with *another*
|
|
// value. When we read the same register two times (and the register still
|
|
// contains the same value) these status bits are not set. We work
|
|
// around this by not polling these bits but only wait a fixed delay.
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/dma/imx-dma.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
|
|
#include "fsl_ssi.h"
|
|
#include "imx-pcm.h"
|
|
|
|
/* Define RX and TX to index ssi->regvals array; Can be 0 or 1 only */
|
|
#define RX 0
|
|
#define TX 1
|
|
|
|
/**
|
|
* FSLSSI_I2S_FORMATS: audio formats supported by the SSI
|
|
*
|
|
* The SSI has a limitation in that the samples must be in the same byte
|
|
* order as the host CPU. This is because when multiple bytes are written
|
|
* to the STX register, the bytes and bits must be written in the same
|
|
* order. The STX is a shift register, so all the bits need to be aligned
|
|
* (bit-endianness must match byte-endianness). Processors typically write
|
|
* the bits within a byte in the same order that the bytes of a word are
|
|
* written in. So if the host CPU is big-endian, then only big-endian
|
|
* samples will be written to STX properly.
|
|
*/
|
|
#ifdef __BIG_ENDIAN
|
|
#define FSLSSI_I2S_FORMATS \
|
|
(SNDRV_PCM_FMTBIT_S8 | \
|
|
SNDRV_PCM_FMTBIT_S16_BE | \
|
|
SNDRV_PCM_FMTBIT_S18_3BE | \
|
|
SNDRV_PCM_FMTBIT_S20_3BE | \
|
|
SNDRV_PCM_FMTBIT_S24_3BE | \
|
|
SNDRV_PCM_FMTBIT_S24_BE)
|
|
#else
|
|
#define FSLSSI_I2S_FORMATS \
|
|
(SNDRV_PCM_FMTBIT_S8 | \
|
|
SNDRV_PCM_FMTBIT_S16_LE | \
|
|
SNDRV_PCM_FMTBIT_S18_3LE | \
|
|
SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_LE)
|
|
#endif
|
|
|
|
/*
|
|
* In AC97 mode, TXDIR bit is forced to 0 and TFDIR bit is forced to 1:
|
|
* - SSI inputs external bit clock and outputs frame sync clock -- CBM_CFS
|
|
* - Also have NB_NF to mark these two clocks will not be inverted
|
|
*/
|
|
#define FSLSSI_AC97_DAIFMT \
|
|
(SND_SOC_DAIFMT_AC97 | \
|
|
SND_SOC_DAIFMT_BC_FP | \
|
|
SND_SOC_DAIFMT_NB_NF)
|
|
|
|
#define FSLSSI_SIER_DBG_RX_FLAGS \
|
|
(SSI_SIER_RFF0_EN | \
|
|
SSI_SIER_RLS_EN | \
|
|
SSI_SIER_RFS_EN | \
|
|
SSI_SIER_ROE0_EN | \
|
|
SSI_SIER_RFRC_EN)
|
|
#define FSLSSI_SIER_DBG_TX_FLAGS \
|
|
(SSI_SIER_TFE0_EN | \
|
|
SSI_SIER_TLS_EN | \
|
|
SSI_SIER_TFS_EN | \
|
|
SSI_SIER_TUE0_EN | \
|
|
SSI_SIER_TFRC_EN)
|
|
|
|
enum fsl_ssi_type {
|
|
FSL_SSI_MCP8610,
|
|
FSL_SSI_MX21,
|
|
FSL_SSI_MX35,
|
|
FSL_SSI_MX51,
|
|
};
|
|
|
|
struct fsl_ssi_regvals {
|
|
u32 sier;
|
|
u32 srcr;
|
|
u32 stcr;
|
|
u32 scr;
|
|
};
|
|
|
|
static bool fsl_ssi_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case REG_SSI_SACCEN:
|
|
case REG_SSI_SACCDIS:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static bool fsl_ssi_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case REG_SSI_STX0:
|
|
case REG_SSI_STX1:
|
|
case REG_SSI_SRX0:
|
|
case REG_SSI_SRX1:
|
|
case REG_SSI_SISR:
|
|
case REG_SSI_SFCSR:
|
|
case REG_SSI_SACNT:
|
|
case REG_SSI_SACADD:
|
|
case REG_SSI_SACDAT:
|
|
case REG_SSI_SATAG:
|
|
case REG_SSI_SACCST:
|
|
case REG_SSI_SOR:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool fsl_ssi_precious_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case REG_SSI_SRX0:
|
|
case REG_SSI_SRX1:
|
|
case REG_SSI_SISR:
|
|
case REG_SSI_SACADD:
|
|
case REG_SSI_SACDAT:
|
|
case REG_SSI_SATAG:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool fsl_ssi_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case REG_SSI_SRX0:
|
|
case REG_SSI_SRX1:
|
|
case REG_SSI_SACCST:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config fsl_ssi_regconfig = {
|
|
.max_register = REG_SSI_SACCDIS,
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_format_endian = REGMAP_ENDIAN_NATIVE,
|
|
.num_reg_defaults_raw = REG_SSI_SACCDIS / sizeof(uint32_t) + 1,
|
|
.readable_reg = fsl_ssi_readable_reg,
|
|
.volatile_reg = fsl_ssi_volatile_reg,
|
|
.precious_reg = fsl_ssi_precious_reg,
|
|
.writeable_reg = fsl_ssi_writeable_reg,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
struct fsl_ssi_soc_data {
|
|
bool imx;
|
|
bool imx21regs; /* imx21-class SSI - no SACC{ST,EN,DIS} regs */
|
|
bool offline_config;
|
|
u32 sisr_write_mask;
|
|
};
|
|
|
|
/**
|
|
* struct fsl_ssi - per-SSI private data
|
|
* @regs: Pointer to the regmap registers
|
|
* @irq: IRQ of this SSI
|
|
* @cpu_dai_drv: CPU DAI driver for this device
|
|
* @dai_fmt: DAI configuration this device is currently used with
|
|
* @streams: Mask of current active streams: BIT(TX) and BIT(RX)
|
|
* @i2s_net: I2S and Network mode configurations of SCR register
|
|
* (this is the initial settings based on the DAI format)
|
|
* @synchronous: Use synchronous mode - both of TX and RX use STCK and SFCK
|
|
* @use_dma: DMA is used or FIQ with stream filter
|
|
* @use_dual_fifo: DMA with support for dual FIFO mode
|
|
* @use_dyna_fifo: DMA with support for multi FIFO script
|
|
* @has_ipg_clk_name: If "ipg" is in the clock name list of device tree
|
|
* @fifo_depth: Depth of the SSI FIFOs
|
|
* @slot_width: Width of each DAI slot
|
|
* @slots: Number of slots
|
|
* @regvals: Specific RX/TX register settings
|
|
* @clk: Clock source to access register
|
|
* @baudclk: Clock source to generate bit and frame-sync clocks
|
|
* @baudclk_streams: Active streams that are using baudclk
|
|
* @regcache_sfcsr: Cache sfcsr register value during suspend and resume
|
|
* @regcache_sacnt: Cache sacnt register value during suspend and resume
|
|
* @dma_params_tx: DMA transmit parameters
|
|
* @dma_params_rx: DMA receive parameters
|
|
* @ssi_phys: physical address of the SSI registers
|
|
* @fiq_params: FIQ stream filtering parameters
|
|
* @card_pdev: Platform_device pointer to register a sound card for PowerPC or
|
|
* to register a CODEC platform device for AC97
|
|
* @card_name: Platform_device name to register a sound card for PowerPC or
|
|
* to register a CODEC platform device for AC97
|
|
* @card_idx: The index of SSI to register a sound card for PowerPC or
|
|
* to register a CODEC platform device for AC97
|
|
* @dbg_stats: Debugging statistics
|
|
* @soc: SoC specific data
|
|
* @dev: Pointer to &pdev->dev
|
|
* @fifo_watermark: The FIFO watermark setting. Notifies DMA when there are
|
|
* @fifo_watermark or fewer words in TX fifo or
|
|
* @fifo_watermark or more empty words in RX fifo.
|
|
* @dma_maxburst: Max number of words to transfer in one go. So far,
|
|
* this is always the same as fifo_watermark.
|
|
* @ac97_reg_lock: Mutex lock to serialize AC97 register access operations
|
|
* @audio_config: configure for dma multi fifo script
|
|
*/
|
|
struct fsl_ssi {
|
|
struct regmap *regs;
|
|
int irq;
|
|
struct snd_soc_dai_driver cpu_dai_drv;
|
|
|
|
unsigned int dai_fmt;
|
|
u8 streams;
|
|
u8 i2s_net;
|
|
bool synchronous;
|
|
bool use_dma;
|
|
bool use_dual_fifo;
|
|
bool use_dyna_fifo;
|
|
bool has_ipg_clk_name;
|
|
unsigned int fifo_depth;
|
|
unsigned int slot_width;
|
|
unsigned int slots;
|
|
struct fsl_ssi_regvals regvals[2];
|
|
|
|
struct clk *clk;
|
|
struct clk *baudclk;
|
|
unsigned int baudclk_streams;
|
|
|
|
u32 regcache_sfcsr;
|
|
u32 regcache_sacnt;
|
|
|
|
struct snd_dmaengine_dai_dma_data dma_params_tx;
|
|
struct snd_dmaengine_dai_dma_data dma_params_rx;
|
|
dma_addr_t ssi_phys;
|
|
|
|
struct imx_pcm_fiq_params fiq_params;
|
|
|
|
struct platform_device *card_pdev;
|
|
char card_name[32];
|
|
u32 card_idx;
|
|
|
|
struct fsl_ssi_dbg dbg_stats;
|
|
|
|
const struct fsl_ssi_soc_data *soc;
|
|
struct device *dev;
|
|
|
|
u32 fifo_watermark;
|
|
u32 dma_maxburst;
|
|
|
|
struct mutex ac97_reg_lock;
|
|
struct sdma_peripheral_config audio_config[2];
|
|
};
|
|
|
|
/*
|
|
* SoC specific data
|
|
*
|
|
* Notes:
|
|
* 1) SSI in earlier SoCS has critical bits in control registers that
|
|
* cannot be changed after SSI starts running -- a software reset
|
|
* (set SSIEN to 0) is required to change their values. So adding
|
|
* an offline_config flag for these SoCs.
|
|
* 2) SDMA is available since imx35. However, imx35 does not support
|
|
* DMA bits changing when SSI is running, so set offline_config.
|
|
* 3) imx51 and later versions support register configurations when
|
|
* SSI is running (SSIEN); For these versions, DMA needs to be
|
|
* configured before SSI sends DMA request to avoid an undefined
|
|
* DMA request on the SDMA side.
|
|
*/
|
|
|
|
static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = {
|
|
.imx = false,
|
|
.offline_config = true,
|
|
.sisr_write_mask = SSI_SISR_RFRC | SSI_SISR_TFRC |
|
|
SSI_SISR_ROE0 | SSI_SISR_ROE1 |
|
|
SSI_SISR_TUE0 | SSI_SISR_TUE1,
|
|
};
|
|
|
|
static struct fsl_ssi_soc_data fsl_ssi_imx21 = {
|
|
.imx = true,
|
|
.imx21regs = true,
|
|
.offline_config = true,
|
|
.sisr_write_mask = 0,
|
|
};
|
|
|
|
static struct fsl_ssi_soc_data fsl_ssi_imx35 = {
|
|
.imx = true,
|
|
.offline_config = true,
|
|
.sisr_write_mask = SSI_SISR_RFRC | SSI_SISR_TFRC |
|
|
SSI_SISR_ROE0 | SSI_SISR_ROE1 |
|
|
SSI_SISR_TUE0 | SSI_SISR_TUE1,
|
|
};
|
|
|
|
static struct fsl_ssi_soc_data fsl_ssi_imx51 = {
|
|
.imx = true,
|
|
.offline_config = false,
|
|
.sisr_write_mask = SSI_SISR_ROE0 | SSI_SISR_ROE1 |
|
|
SSI_SISR_TUE0 | SSI_SISR_TUE1,
|
|
};
|
|
|
|
static const struct of_device_id fsl_ssi_ids[] = {
|
|
{ .compatible = "fsl,mpc8610-ssi", .data = &fsl_ssi_mpc8610 },
|
|
{ .compatible = "fsl,imx51-ssi", .data = &fsl_ssi_imx51 },
|
|
{ .compatible = "fsl,imx35-ssi", .data = &fsl_ssi_imx35 },
|
|
{ .compatible = "fsl,imx21-ssi", .data = &fsl_ssi_imx21 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fsl_ssi_ids);
|
|
|
|
static bool fsl_ssi_is_ac97(struct fsl_ssi *ssi)
|
|
{
|
|
return (ssi->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) ==
|
|
SND_SOC_DAIFMT_AC97;
|
|
}
|
|
|
|
static bool fsl_ssi_is_i2s_clock_provider(struct fsl_ssi *ssi)
|
|
{
|
|
return (ssi->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) ==
|
|
SND_SOC_DAIFMT_BP_FP;
|
|
}
|
|
|
|
static bool fsl_ssi_is_i2s_bc_fp(struct fsl_ssi *ssi)
|
|
{
|
|
return (ssi->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) ==
|
|
SND_SOC_DAIFMT_BC_FP;
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_isr - Interrupt handler to gather states
|
|
* @irq: irq number
|
|
* @dev_id: context
|
|
*/
|
|
static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
|
|
{
|
|
struct fsl_ssi *ssi = dev_id;
|
|
struct regmap *regs = ssi->regs;
|
|
u32 sisr, sisr2;
|
|
|
|
regmap_read(regs, REG_SSI_SISR, &sisr);
|
|
|
|
sisr2 = sisr & ssi->soc->sisr_write_mask;
|
|
/* Clear the bits that we set */
|
|
if (sisr2)
|
|
regmap_write(regs, REG_SSI_SISR, sisr2);
|
|
|
|
fsl_ssi_dbg_isr(&ssi->dbg_stats, sisr);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_config_enable - Set SCR, SIER, STCR and SRCR registers with
|
|
* cached values in regvals
|
|
* @ssi: SSI context
|
|
* @tx: direction
|
|
*
|
|
* Notes:
|
|
* 1) For offline_config SoCs, enable all necessary bits of both streams
|
|
* when 1st stream starts, even if the opposite stream will not start
|
|
* 2) It also clears FIFO before setting regvals; SOR is safe to set online
|
|
*/
|
|
static void fsl_ssi_config_enable(struct fsl_ssi *ssi, bool tx)
|
|
{
|
|
struct fsl_ssi_regvals *vals = ssi->regvals;
|
|
int dir = tx ? TX : RX;
|
|
u32 sier, srcr, stcr;
|
|
|
|
/* Clear dirty data in the FIFO; It also prevents channel slipping */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SOR,
|
|
SSI_SOR_xX_CLR(tx), SSI_SOR_xX_CLR(tx));
|
|
|
|
/*
|
|
* On offline_config SoCs, SxCR and SIER are already configured when
|
|
* the previous stream started. So skip all SxCR and SIER settings
|
|
* to prevent online reconfigurations, then jump to set SCR directly
|
|
*/
|
|
if (ssi->soc->offline_config && ssi->streams)
|
|
goto enable_scr;
|
|
|
|
if (ssi->soc->offline_config) {
|
|
/*
|
|
* Online reconfiguration not supported, so enable all bits for
|
|
* both streams at once to avoid necessity of reconfigurations
|
|
*/
|
|
srcr = vals[RX].srcr | vals[TX].srcr;
|
|
stcr = vals[RX].stcr | vals[TX].stcr;
|
|
sier = vals[RX].sier | vals[TX].sier;
|
|
} else {
|
|
/* Otherwise, only set bits for the current stream */
|
|
srcr = vals[dir].srcr;
|
|
stcr = vals[dir].stcr;
|
|
sier = vals[dir].sier;
|
|
}
|
|
|
|
/* Configure SRCR, STCR and SIER at once */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SRCR, srcr, srcr);
|
|
regmap_update_bits(ssi->regs, REG_SSI_STCR, stcr, stcr);
|
|
regmap_update_bits(ssi->regs, REG_SSI_SIER, sier, sier);
|
|
|
|
enable_scr:
|
|
/*
|
|
* Start DMA before setting TE to avoid FIFO underrun
|
|
* which may cause a channel slip or a channel swap
|
|
*
|
|
* TODO: FIQ cases might also need this upon testing
|
|
*/
|
|
if (ssi->use_dma && tx) {
|
|
int try = 100;
|
|
u32 sfcsr;
|
|
|
|
/* Enable SSI first to send TX DMA request */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SCR,
|
|
SSI_SCR_SSIEN, SSI_SCR_SSIEN);
|
|
|
|
/* Busy wait until TX FIFO not empty -- DMA working */
|
|
do {
|
|
regmap_read(ssi->regs, REG_SSI_SFCSR, &sfcsr);
|
|
if (SSI_SFCSR_TFCNT0(sfcsr))
|
|
break;
|
|
} while (--try);
|
|
|
|
/* FIFO still empty -- something might be wrong */
|
|
if (!SSI_SFCSR_TFCNT0(sfcsr))
|
|
dev_warn(ssi->dev, "Timeout waiting TX FIFO filling\n");
|
|
}
|
|
/* Enable all remaining bits in SCR */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SCR,
|
|
vals[dir].scr, vals[dir].scr);
|
|
|
|
/* Log the enabled stream to the mask */
|
|
ssi->streams |= BIT(dir);
|
|
}
|
|
|
|
/*
|
|
* Exclude bits that are used by the opposite stream
|
|
*
|
|
* When both streams are active, disabling some bits for the current stream
|
|
* might break the other stream if these bits are used by it.
|
|
*
|
|
* @vals : regvals of the current stream
|
|
* @avals: regvals of the opposite stream
|
|
* @aactive: active state of the opposite stream
|
|
*
|
|
* 1) XOR vals and avals to get the differences if the other stream is active;
|
|
* Otherwise, return current vals if the other stream is not active
|
|
* 2) AND the result of 1) with the current vals
|
|
*/
|
|
#define _ssi_xor_shared_bits(vals, avals, aactive) \
|
|
((vals) ^ ((avals) * (aactive)))
|
|
|
|
#define ssi_excl_shared_bits(vals, avals, aactive) \
|
|
((vals) & _ssi_xor_shared_bits(vals, avals, aactive))
|
|
|
|
/**
|
|
* fsl_ssi_config_disable - Unset SCR, SIER, STCR and SRCR registers
|
|
* with cached values in regvals
|
|
* @ssi: SSI context
|
|
* @tx: direction
|
|
*
|
|
* Notes:
|
|
* 1) For offline_config SoCs, to avoid online reconfigurations, disable all
|
|
* bits of both streams at once when the last stream is abort to end
|
|
* 2) It also clears FIFO after unsetting regvals; SOR is safe to set online
|
|
*/
|
|
static void fsl_ssi_config_disable(struct fsl_ssi *ssi, bool tx)
|
|
{
|
|
struct fsl_ssi_regvals *vals, *avals;
|
|
u32 sier, srcr, stcr, scr;
|
|
int adir = tx ? RX : TX;
|
|
int dir = tx ? TX : RX;
|
|
bool aactive;
|
|
|
|
/* Check if the opposite stream is active */
|
|
aactive = ssi->streams & BIT(adir);
|
|
|
|
vals = &ssi->regvals[dir];
|
|
|
|
/* Get regvals of the opposite stream to keep opposite stream safe */
|
|
avals = &ssi->regvals[adir];
|
|
|
|
/*
|
|
* To keep the other stream safe, exclude shared bits between
|
|
* both streams, and get safe bits to disable current stream
|
|
*/
|
|
scr = ssi_excl_shared_bits(vals->scr, avals->scr, aactive);
|
|
|
|
/* Disable safe bits of SCR register for the current stream */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SCR, scr, 0);
|
|
|
|
/* Log the disabled stream to the mask */
|
|
ssi->streams &= ~BIT(dir);
|
|
|
|
/*
|
|
* On offline_config SoCs, if the other stream is active, skip
|
|
* SxCR and SIER settings to prevent online reconfigurations
|
|
*/
|
|
if (ssi->soc->offline_config && aactive)
|
|
goto fifo_clear;
|
|
|
|
if (ssi->soc->offline_config) {
|
|
/* Now there is only current stream active, disable all bits */
|
|
srcr = vals->srcr | avals->srcr;
|
|
stcr = vals->stcr | avals->stcr;
|
|
sier = vals->sier | avals->sier;
|
|
} else {
|
|
/*
|
|
* To keep the other stream safe, exclude shared bits between
|
|
* both streams, and get safe bits to disable current stream
|
|
*/
|
|
sier = ssi_excl_shared_bits(vals->sier, avals->sier, aactive);
|
|
srcr = ssi_excl_shared_bits(vals->srcr, avals->srcr, aactive);
|
|
stcr = ssi_excl_shared_bits(vals->stcr, avals->stcr, aactive);
|
|
}
|
|
|
|
/* Clear configurations of SRCR, STCR and SIER at once */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SRCR, srcr, 0);
|
|
regmap_update_bits(ssi->regs, REG_SSI_STCR, stcr, 0);
|
|
regmap_update_bits(ssi->regs, REG_SSI_SIER, sier, 0);
|
|
|
|
fifo_clear:
|
|
/* Clear remaining data in the FIFO */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SOR,
|
|
SSI_SOR_xX_CLR(tx), SSI_SOR_xX_CLR(tx));
|
|
}
|
|
|
|
static void fsl_ssi_tx_ac97_saccst_setup(struct fsl_ssi *ssi)
|
|
{
|
|
struct regmap *regs = ssi->regs;
|
|
|
|
/* no SACC{ST,EN,DIS} regs on imx21-class SSI */
|
|
if (!ssi->soc->imx21regs) {
|
|
/* Disable all channel slots */
|
|
regmap_write(regs, REG_SSI_SACCDIS, 0xff);
|
|
/* Enable slots 3 & 4 -- PCM Playback Left & Right channels */
|
|
regmap_write(regs, REG_SSI_SACCEN, 0x300);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_setup_regvals - Cache critical bits of SIER, SRCR, STCR and
|
|
* SCR to later set them safely
|
|
* @ssi: SSI context
|
|
*/
|
|
static void fsl_ssi_setup_regvals(struct fsl_ssi *ssi)
|
|
{
|
|
struct fsl_ssi_regvals *vals = ssi->regvals;
|
|
|
|
vals[RX].sier = SSI_SIER_RFF0_EN | FSLSSI_SIER_DBG_RX_FLAGS;
|
|
vals[RX].srcr = SSI_SRCR_RFEN0;
|
|
vals[RX].scr = SSI_SCR_SSIEN | SSI_SCR_RE;
|
|
vals[TX].sier = SSI_SIER_TFE0_EN | FSLSSI_SIER_DBG_TX_FLAGS;
|
|
vals[TX].stcr = SSI_STCR_TFEN0;
|
|
vals[TX].scr = SSI_SCR_SSIEN | SSI_SCR_TE;
|
|
|
|
/* AC97 has already enabled SSIEN, RE and TE, so ignore them */
|
|
if (fsl_ssi_is_ac97(ssi))
|
|
vals[RX].scr = vals[TX].scr = 0;
|
|
|
|
if (ssi->use_dual_fifo) {
|
|
vals[RX].srcr |= SSI_SRCR_RFEN1;
|
|
vals[TX].stcr |= SSI_STCR_TFEN1;
|
|
}
|
|
|
|
if (ssi->use_dma) {
|
|
vals[RX].sier |= SSI_SIER_RDMAE;
|
|
vals[TX].sier |= SSI_SIER_TDMAE;
|
|
} else {
|
|
vals[RX].sier |= SSI_SIER_RIE;
|
|
vals[TX].sier |= SSI_SIER_TIE;
|
|
}
|
|
}
|
|
|
|
static void fsl_ssi_setup_ac97(struct fsl_ssi *ssi)
|
|
{
|
|
struct regmap *regs = ssi->regs;
|
|
|
|
/* Setup the clock control register */
|
|
regmap_write(regs, REG_SSI_STCCR, SSI_SxCCR_WL(17) | SSI_SxCCR_DC(13));
|
|
regmap_write(regs, REG_SSI_SRCCR, SSI_SxCCR_WL(17) | SSI_SxCCR_DC(13));
|
|
|
|
/* Enable AC97 mode and startup the SSI */
|
|
regmap_write(regs, REG_SSI_SACNT, SSI_SACNT_AC97EN | SSI_SACNT_FV);
|
|
|
|
/* AC97 has to communicate with codec before starting a stream */
|
|
regmap_update_bits(regs, REG_SSI_SCR,
|
|
SSI_SCR_SSIEN | SSI_SCR_TE | SSI_SCR_RE,
|
|
SSI_SCR_SSIEN | SSI_SCR_TE | SSI_SCR_RE);
|
|
|
|
regmap_write(regs, REG_SSI_SOR, SSI_SOR_WAIT(3));
|
|
}
|
|
|
|
static int fsl_ssi_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(ssi->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* When using dual fifo mode, it is safer to ensure an even period
|
|
* size. If appearing to an odd number while DMA always starts its
|
|
* task from fifo0, fifo1 would be neglected at the end of each
|
|
* period. But SSI would still access fifo1 with an invalid data.
|
|
*/
|
|
if (ssi->use_dual_fifo || ssi->use_dyna_fifo)
|
|
snd_pcm_hw_constraint_step(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
|
|
clk_disable_unprepare(ssi->clk);
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_set_bclk - Configure Digital Audio Interface bit clock
|
|
* @substream: ASoC substream
|
|
* @dai: pointer to DAI
|
|
* @hw_params: pointers to hw_params
|
|
*
|
|
* Notes: This function can be only called when using SSI as DAI master
|
|
*
|
|
* Quick instruction for parameters:
|
|
* freq: Output BCLK frequency = samplerate * slots * slot_width
|
|
* (In 2-channel I2S Master mode, slot_width is fixed 32)
|
|
*/
|
|
static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai,
|
|
struct snd_pcm_hw_params *hw_params)
|
|
{
|
|
bool tx2, tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(dai);
|
|
struct regmap *regs = ssi->regs;
|
|
u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
|
|
unsigned long clkrate, baudrate, tmprate;
|
|
unsigned int channels = params_channels(hw_params);
|
|
unsigned int slot_width = params_width(hw_params);
|
|
unsigned int slots = 2;
|
|
u64 sub, savesub = 100000;
|
|
unsigned int freq;
|
|
bool baudclk_is_used;
|
|
int ret;
|
|
|
|
/* Override slots and slot_width if being specifically set... */
|
|
if (ssi->slots)
|
|
slots = ssi->slots;
|
|
if (ssi->slot_width)
|
|
slot_width = ssi->slot_width;
|
|
|
|
/* ...but force 32 bits for stereo audio using I2S Master Mode */
|
|
if (channels == 2 &&
|
|
(ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) == SSI_SCR_I2S_MODE_MASTER)
|
|
slot_width = 32;
|
|
|
|
/* Generate bit clock based on the slot number and slot width */
|
|
freq = slots * slot_width * params_rate(hw_params);
|
|
|
|
/* Don't apply it to any non-baudclk circumstance */
|
|
if (IS_ERR(ssi->baudclk))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Hardware limitation: The bclk rate must be
|
|
* never greater than 1/5 IPG clock rate
|
|
*/
|
|
if (freq * 5 > clk_get_rate(ssi->clk)) {
|
|
dev_err(dai->dev, "bitclk > ipgclk / 5\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
baudclk_is_used = ssi->baudclk_streams & ~(BIT(substream->stream));
|
|
|
|
/* It should be already enough to divide clock by setting pm alone */
|
|
psr = 0;
|
|
div2 = 0;
|
|
|
|
factor = (div2 + 1) * (7 * psr + 1) * 2;
|
|
|
|
for (i = 0; i < 255; i++) {
|
|
tmprate = freq * factor * (i + 1);
|
|
|
|
if (baudclk_is_used)
|
|
clkrate = clk_get_rate(ssi->baudclk);
|
|
else
|
|
clkrate = clk_round_rate(ssi->baudclk, tmprate);
|
|
|
|
clkrate /= factor;
|
|
afreq = clkrate / (i + 1);
|
|
|
|
if (freq == afreq)
|
|
sub = 0;
|
|
else if (freq / afreq == 1)
|
|
sub = freq - afreq;
|
|
else if (afreq / freq == 1)
|
|
sub = afreq - freq;
|
|
else
|
|
continue;
|
|
|
|
/* Calculate the fraction */
|
|
sub *= 100000;
|
|
do_div(sub, freq);
|
|
|
|
if (sub < savesub && !(i == 0)) {
|
|
baudrate = tmprate;
|
|
savesub = sub;
|
|
pm = i;
|
|
}
|
|
|
|
/* We are lucky */
|
|
if (savesub == 0)
|
|
break;
|
|
}
|
|
|
|
/* No proper pm found if it is still remaining the initial value */
|
|
if (pm == 999) {
|
|
dev_err(dai->dev, "failed to handle the required sysclk\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
stccr = SSI_SxCCR_PM(pm + 1);
|
|
mask = SSI_SxCCR_PM_MASK | SSI_SxCCR_DIV2 | SSI_SxCCR_PSR;
|
|
|
|
/* STCCR is used for RX in synchronous mode */
|
|
tx2 = tx || ssi->synchronous;
|
|
regmap_update_bits(regs, REG_SSI_SxCCR(tx2), mask, stccr);
|
|
|
|
if (!baudclk_is_used) {
|
|
ret = clk_set_rate(ssi->baudclk, baudrate);
|
|
if (ret) {
|
|
dev_err(dai->dev, "failed to set baudclk rate\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_hw_params - Configure SSI based on PCM hardware parameters
|
|
* @substream: ASoC substream
|
|
* @hw_params: pointers to hw_params
|
|
* @dai: pointer to DAI
|
|
*
|
|
* Notes:
|
|
* 1) SxCCR.WL bits are critical bits that require SSI to be temporarily
|
|
* disabled on offline_config SoCs. Even for online configurable SoCs
|
|
* running in synchronous mode (both TX and RX use STCCR), it is not
|
|
* safe to re-configure them when both two streams start running.
|
|
* 2) SxCCR.PM, SxCCR.DIV2 and SxCCR.PSR bits will be configured in the
|
|
* fsl_ssi_set_bclk() if SSI is the DAI clock master.
|
|
*/
|
|
static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *hw_params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
bool tx2, tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(dai);
|
|
struct fsl_ssi_regvals *vals = ssi->regvals;
|
|
struct regmap *regs = ssi->regs;
|
|
unsigned int channels = params_channels(hw_params);
|
|
unsigned int sample_size = params_width(hw_params);
|
|
u32 wl = SSI_SxCCR_WL(sample_size);
|
|
int ret;
|
|
|
|
if (fsl_ssi_is_i2s_clock_provider(ssi)) {
|
|
ret = fsl_ssi_set_bclk(substream, dai, hw_params);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Do not enable the clock if it is already enabled */
|
|
if (!(ssi->baudclk_streams & BIT(substream->stream))) {
|
|
ret = clk_prepare_enable(ssi->baudclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ssi->baudclk_streams |= BIT(substream->stream);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* SSI is properly configured if it is enabled and running in
|
|
* the synchronous mode; Note that AC97 mode is an exception
|
|
* that should set separate configurations for STCCR and SRCCR
|
|
* despite running in the synchronous mode.
|
|
*/
|
|
if (ssi->streams && ssi->synchronous)
|
|
return 0;
|
|
|
|
if (!fsl_ssi_is_ac97(ssi)) {
|
|
/*
|
|
* Keep the ssi->i2s_net intact while having a local variable
|
|
* to override settings for special use cases. Otherwise, the
|
|
* ssi->i2s_net will lose the settings for regular use cases.
|
|
*/
|
|
u8 i2s_net = ssi->i2s_net;
|
|
|
|
/* Normal + Network mode to send 16-bit data in 32-bit frames */
|
|
if (fsl_ssi_is_i2s_bc_fp(ssi) && sample_size == 16)
|
|
i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET;
|
|
|
|
/* Use Normal mode to send mono data at 1st slot of 2 slots */
|
|
if (channels == 1)
|
|
i2s_net = SSI_SCR_I2S_MODE_NORMAL;
|
|
|
|
regmap_update_bits(regs, REG_SSI_SCR,
|
|
SSI_SCR_I2S_NET_MASK, i2s_net);
|
|
}
|
|
|
|
/* In synchronous mode, the SSI uses STCCR for capture */
|
|
tx2 = tx || ssi->synchronous;
|
|
regmap_update_bits(regs, REG_SSI_SxCCR(tx2), SSI_SxCCR_WL_MASK, wl);
|
|
|
|
if (ssi->use_dyna_fifo) {
|
|
if (channels == 1) {
|
|
ssi->audio_config[0].n_fifos_dst = 1;
|
|
ssi->audio_config[1].n_fifos_src = 1;
|
|
vals[RX].srcr &= ~SSI_SRCR_RFEN1;
|
|
vals[TX].stcr &= ~SSI_STCR_TFEN1;
|
|
vals[RX].scr &= ~SSI_SCR_TCH_EN;
|
|
vals[TX].scr &= ~SSI_SCR_TCH_EN;
|
|
} else {
|
|
ssi->audio_config[0].n_fifos_dst = 2;
|
|
ssi->audio_config[1].n_fifos_src = 2;
|
|
vals[RX].srcr |= SSI_SRCR_RFEN1;
|
|
vals[TX].stcr |= SSI_STCR_TFEN1;
|
|
vals[RX].scr |= SSI_SCR_TCH_EN;
|
|
vals[TX].scr |= SSI_SCR_TCH_EN;
|
|
}
|
|
ssi->dma_params_tx.peripheral_config = &ssi->audio_config[0];
|
|
ssi->dma_params_tx.peripheral_size = sizeof(ssi->audio_config[0]);
|
|
ssi->dma_params_rx.peripheral_config = &ssi->audio_config[1];
|
|
ssi->dma_params_rx.peripheral_size = sizeof(ssi->audio_config[1]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_ssi_hw_free(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
|
|
if (fsl_ssi_is_i2s_clock_provider(ssi) &&
|
|
ssi->baudclk_streams & BIT(substream->stream)) {
|
|
clk_disable_unprepare(ssi->baudclk);
|
|
ssi->baudclk_streams &= ~BIT(substream->stream);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _fsl_ssi_set_dai_fmt(struct fsl_ssi *ssi, unsigned int fmt)
|
|
{
|
|
u32 strcr = 0, scr = 0, stcr, srcr, mask;
|
|
unsigned int slots;
|
|
|
|
ssi->dai_fmt = fmt;
|
|
|
|
/* Synchronize frame sync clock for TE to avoid data slipping */
|
|
scr |= SSI_SCR_SYNC_TX_FS;
|
|
|
|
/* Set to default shifting settings: LSB_ALIGNED */
|
|
strcr |= SSI_STCR_TXBIT0;
|
|
|
|
/* Use Network mode as default */
|
|
ssi->i2s_net = SSI_SCR_NET;
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
|
|
case SND_SOC_DAIFMT_BP_FP:
|
|
if (IS_ERR(ssi->baudclk)) {
|
|
dev_err(ssi->dev,
|
|
"missing baudclk for master mode\n");
|
|
return -EINVAL;
|
|
}
|
|
fallthrough;
|
|
case SND_SOC_DAIFMT_BC_FP:
|
|
ssi->i2s_net |= SSI_SCR_I2S_MODE_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_BC_FC:
|
|
ssi->i2s_net |= SSI_SCR_I2S_MODE_SLAVE;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
slots = ssi->slots ? : 2;
|
|
regmap_update_bits(ssi->regs, REG_SSI_STCCR,
|
|
SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(slots));
|
|
regmap_update_bits(ssi->regs, REG_SSI_SRCCR,
|
|
SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(slots));
|
|
|
|
/* Data on rising edge of bclk, frame low, 1clk before data */
|
|
strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP | SSI_STCR_TEFS;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
/* Data on rising edge of bclk, frame high */
|
|
strcr |= SSI_STCR_TSCKP;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
/* Data on rising edge of bclk, frame high, 1clk before data */
|
|
strcr |= SSI_STCR_TFSL | SSI_STCR_TSCKP | SSI_STCR_TEFS;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/* Data on rising edge of bclk, frame high */
|
|
strcr |= SSI_STCR_TFSL | SSI_STCR_TSCKP;
|
|
break;
|
|
case SND_SOC_DAIFMT_AC97:
|
|
/* Data on falling edge of bclk, frame high, 1clk before data */
|
|
strcr |= SSI_STCR_TEFS;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
scr |= ssi->i2s_net;
|
|
|
|
/* DAI clock inversion */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
/* Nothing to do for both normal cases */
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
/* Invert bit clock */
|
|
strcr ^= SSI_STCR_TSCKP;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
/* Invert frame clock */
|
|
strcr ^= SSI_STCR_TFSI;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
/* Invert both clocks */
|
|
strcr ^= SSI_STCR_TSCKP;
|
|
strcr ^= SSI_STCR_TFSI;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* DAI clock provider masks */
|
|
switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
|
|
case SND_SOC_DAIFMT_BP_FP:
|
|
/* Output bit and frame sync clocks */
|
|
strcr |= SSI_STCR_TFDIR | SSI_STCR_TXDIR;
|
|
scr |= SSI_SCR_SYS_CLK_EN;
|
|
break;
|
|
case SND_SOC_DAIFMT_BC_FC:
|
|
/* Input bit or frame sync clocks */
|
|
break;
|
|
case SND_SOC_DAIFMT_BC_FP:
|
|
/* Input bit clock but output frame sync clock */
|
|
strcr |= SSI_STCR_TFDIR;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
stcr = strcr;
|
|
srcr = strcr;
|
|
|
|
/* Set SYN mode and clear RXDIR bit when using SYN or AC97 mode */
|
|
if (ssi->synchronous || fsl_ssi_is_ac97(ssi)) {
|
|
srcr &= ~SSI_SRCR_RXDIR;
|
|
scr |= SSI_SCR_SYN;
|
|
}
|
|
|
|
mask = SSI_STCR_TFDIR | SSI_STCR_TXDIR | SSI_STCR_TSCKP |
|
|
SSI_STCR_TFSL | SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
|
|
|
|
regmap_update_bits(ssi->regs, REG_SSI_STCR, mask, stcr);
|
|
regmap_update_bits(ssi->regs, REG_SSI_SRCR, mask, srcr);
|
|
|
|
mask = SSI_SCR_SYNC_TX_FS | SSI_SCR_I2S_MODE_MASK |
|
|
SSI_SCR_SYS_CLK_EN | SSI_SCR_SYN;
|
|
regmap_update_bits(ssi->regs, REG_SSI_SCR, mask, scr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_set_dai_fmt - Configure Digital Audio Interface (DAI) Format
|
|
* @dai: pointer to DAI
|
|
* @fmt: format mask
|
|
*/
|
|
static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(dai);
|
|
|
|
/* AC97 configured DAIFMT earlier in the probe() */
|
|
if (fsl_ssi_is_ac97(ssi))
|
|
return 0;
|
|
|
|
return _fsl_ssi_set_dai_fmt(ssi, fmt);
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_set_dai_tdm_slot - Set TDM slot number and slot width
|
|
* @dai: pointer to DAI
|
|
* @tx_mask: mask for TX
|
|
* @rx_mask: mask for RX
|
|
* @slots: number of slots
|
|
* @slot_width: number of bits per slot
|
|
*/
|
|
static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask,
|
|
u32 rx_mask, int slots, int slot_width)
|
|
{
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(dai);
|
|
struct regmap *regs = ssi->regs;
|
|
u32 val;
|
|
|
|
/* The word length should be 8, 10, 12, 16, 18, 20, 22 or 24 */
|
|
if (slot_width & 1 || slot_width < 8 || slot_width > 24) {
|
|
dev_err(dai->dev, "invalid slot width: %d\n", slot_width);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The slot number should be >= 2 if using Network mode or I2S mode */
|
|
if (ssi->i2s_net && slots < 2) {
|
|
dev_err(dai->dev, "slot number should be >= 2 in I2S or NET\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(regs, REG_SSI_STCCR,
|
|
SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(slots));
|
|
regmap_update_bits(regs, REG_SSI_SRCCR,
|
|
SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(slots));
|
|
|
|
/* Save the SCR register value */
|
|
regmap_read(regs, REG_SSI_SCR, &val);
|
|
/* Temporarily enable SSI to allow SxMSKs to be configurable */
|
|
regmap_update_bits(regs, REG_SSI_SCR, SSI_SCR_SSIEN, SSI_SCR_SSIEN);
|
|
|
|
regmap_write(regs, REG_SSI_STMSK, ~tx_mask);
|
|
regmap_write(regs, REG_SSI_SRMSK, ~rx_mask);
|
|
|
|
/* Restore the value of SSIEN bit */
|
|
regmap_update_bits(regs, REG_SSI_SCR, SSI_SCR_SSIEN, val);
|
|
|
|
ssi->slot_width = slot_width;
|
|
ssi->slots = slots;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_trigger - Start or stop SSI and corresponding DMA transaction.
|
|
* @substream: ASoC substream
|
|
* @cmd: trigger command
|
|
* @dai: pointer to DAI
|
|
*
|
|
* The DMA channel is in external master start and pause mode, which
|
|
* means the SSI completely controls the flow of data.
|
|
*/
|
|
static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
/*
|
|
* SACCST might be modified via AC Link by a CODEC if it sends
|
|
* extra bits in their SLOTREQ requests, which'll accidentally
|
|
* send valid data to slots other than normal playback slots.
|
|
*
|
|
* To be safe, configure SACCST right before TX starts.
|
|
*/
|
|
if (tx && fsl_ssi_is_ac97(ssi))
|
|
fsl_ssi_tx_ac97_saccst_setup(ssi);
|
|
fsl_ssi_config_enable(ssi, tx);
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
fsl_ssi_config_disable(ssi, tx);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_ssi_dai_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(dai);
|
|
|
|
if (ssi->soc->imx && ssi->use_dma)
|
|
snd_soc_dai_init_dma_data(dai, &ssi->dma_params_tx,
|
|
&ssi->dma_params_rx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops fsl_ssi_dai_ops = {
|
|
.probe = fsl_ssi_dai_probe,
|
|
.startup = fsl_ssi_startup,
|
|
.shutdown = fsl_ssi_shutdown,
|
|
.hw_params = fsl_ssi_hw_params,
|
|
.hw_free = fsl_ssi_hw_free,
|
|
.set_fmt = fsl_ssi_set_dai_fmt,
|
|
.set_tdm_slot = fsl_ssi_set_dai_tdm_slot,
|
|
.trigger = fsl_ssi_trigger,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver fsl_ssi_dai_template = {
|
|
.playback = {
|
|
.stream_name = "CPU-Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 32,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.formats = FSLSSI_I2S_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "CPU-Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 32,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.formats = FSLSSI_I2S_FORMATS,
|
|
},
|
|
.ops = &fsl_ssi_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver fsl_ssi_component = {
|
|
.name = "fsl-ssi",
|
|
.legacy_dai_naming = 1,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver fsl_ssi_ac97_dai = {
|
|
.symmetric_channels = 1,
|
|
.playback = {
|
|
.stream_name = "CPU AC97 Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16 | SNDRV_PCM_FMTBIT_S20,
|
|
},
|
|
.capture = {
|
|
.stream_name = "CPU AC97 Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_48000,
|
|
/* 16-bit capture is broken (errata ERR003778) */
|
|
.formats = SNDRV_PCM_FMTBIT_S20,
|
|
},
|
|
.ops = &fsl_ssi_dai_ops,
|
|
};
|
|
|
|
static struct fsl_ssi *fsl_ac97_data;
|
|
|
|
static void fsl_ssi_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
struct regmap *regs = fsl_ac97_data->regs;
|
|
unsigned int lreg;
|
|
unsigned int lval;
|
|
int ret;
|
|
|
|
if (reg > 0x7f)
|
|
return;
|
|
|
|
mutex_lock(&fsl_ac97_data->ac97_reg_lock);
|
|
|
|
ret = clk_prepare_enable(fsl_ac97_data->clk);
|
|
if (ret) {
|
|
pr_err("ac97 write clk_prepare_enable failed: %d\n",
|
|
ret);
|
|
goto ret_unlock;
|
|
}
|
|
|
|
lreg = reg << 12;
|
|
regmap_write(regs, REG_SSI_SACADD, lreg);
|
|
|
|
lval = val << 4;
|
|
regmap_write(regs, REG_SSI_SACDAT, lval);
|
|
|
|
regmap_update_bits(regs, REG_SSI_SACNT,
|
|
SSI_SACNT_RDWR_MASK, SSI_SACNT_WR);
|
|
udelay(100);
|
|
|
|
clk_disable_unprepare(fsl_ac97_data->clk);
|
|
|
|
ret_unlock:
|
|
mutex_unlock(&fsl_ac97_data->ac97_reg_lock);
|
|
}
|
|
|
|
static unsigned short fsl_ssi_ac97_read(struct snd_ac97 *ac97,
|
|
unsigned short reg)
|
|
{
|
|
struct regmap *regs = fsl_ac97_data->regs;
|
|
unsigned short val = 0;
|
|
u32 reg_val;
|
|
unsigned int lreg;
|
|
int ret;
|
|
|
|
mutex_lock(&fsl_ac97_data->ac97_reg_lock);
|
|
|
|
ret = clk_prepare_enable(fsl_ac97_data->clk);
|
|
if (ret) {
|
|
pr_err("ac97 read clk_prepare_enable failed: %d\n", ret);
|
|
goto ret_unlock;
|
|
}
|
|
|
|
lreg = (reg & 0x7f) << 12;
|
|
regmap_write(regs, REG_SSI_SACADD, lreg);
|
|
regmap_update_bits(regs, REG_SSI_SACNT,
|
|
SSI_SACNT_RDWR_MASK, SSI_SACNT_RD);
|
|
|
|
udelay(100);
|
|
|
|
regmap_read(regs, REG_SSI_SACDAT, ®_val);
|
|
val = (reg_val >> 4) & 0xffff;
|
|
|
|
clk_disable_unprepare(fsl_ac97_data->clk);
|
|
|
|
ret_unlock:
|
|
mutex_unlock(&fsl_ac97_data->ac97_reg_lock);
|
|
return val;
|
|
}
|
|
|
|
static struct snd_ac97_bus_ops fsl_ssi_ac97_ops = {
|
|
.read = fsl_ssi_ac97_read,
|
|
.write = fsl_ssi_ac97_write,
|
|
};
|
|
|
|
/**
|
|
* fsl_ssi_hw_init - Initialize SSI registers
|
|
* @ssi: SSI context
|
|
*/
|
|
static int fsl_ssi_hw_init(struct fsl_ssi *ssi)
|
|
{
|
|
u32 wm = ssi->fifo_watermark;
|
|
|
|
/* Initialize regvals */
|
|
fsl_ssi_setup_regvals(ssi);
|
|
|
|
/* Set watermarks */
|
|
regmap_write(ssi->regs, REG_SSI_SFCSR,
|
|
SSI_SFCSR_TFWM0(wm) | SSI_SFCSR_RFWM0(wm) |
|
|
SSI_SFCSR_TFWM1(wm) | SSI_SFCSR_RFWM1(wm));
|
|
|
|
/* Enable Dual FIFO mode */
|
|
if (ssi->use_dual_fifo)
|
|
regmap_update_bits(ssi->regs, REG_SSI_SCR,
|
|
SSI_SCR_TCH_EN, SSI_SCR_TCH_EN);
|
|
|
|
/* AC97 should start earlier to communicate with CODECs */
|
|
if (fsl_ssi_is_ac97(ssi)) {
|
|
_fsl_ssi_set_dai_fmt(ssi, ssi->dai_fmt);
|
|
fsl_ssi_setup_ac97(ssi);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fsl_ssi_hw_clean - Clear SSI registers
|
|
* @ssi: SSI context
|
|
*/
|
|
static void fsl_ssi_hw_clean(struct fsl_ssi *ssi)
|
|
{
|
|
/* Disable registers for AC97 */
|
|
if (fsl_ssi_is_ac97(ssi)) {
|
|
/* Disable TE and RE bits first */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SCR,
|
|
SSI_SCR_TE | SSI_SCR_RE, 0);
|
|
/* Disable AC97 mode */
|
|
regmap_write(ssi->regs, REG_SSI_SACNT, 0);
|
|
/* Unset WAIT bits */
|
|
regmap_write(ssi->regs, REG_SSI_SOR, 0);
|
|
/* Disable SSI -- software reset */
|
|
regmap_update_bits(ssi->regs, REG_SSI_SCR, SSI_SCR_SSIEN, 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Make every character in a string lower-case
|
|
*/
|
|
static void make_lowercase(char *s)
|
|
{
|
|
if (!s)
|
|
return;
|
|
for (; *s; s++)
|
|
*s = tolower(*s);
|
|
}
|
|
|
|
static int fsl_ssi_imx_probe(struct platform_device *pdev,
|
|
struct fsl_ssi *ssi, void __iomem *iomem)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
/* Backward compatible for a DT without ipg clock name assigned */
|
|
if (ssi->has_ipg_clk_name)
|
|
ssi->clk = devm_clk_get(dev, "ipg");
|
|
else
|
|
ssi->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(ssi->clk)) {
|
|
ret = PTR_ERR(ssi->clk);
|
|
dev_err(dev, "failed to get clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Enable the clock since regmap will not handle it in this case */
|
|
if (!ssi->has_ipg_clk_name) {
|
|
ret = clk_prepare_enable(ssi->clk);
|
|
if (ret) {
|
|
dev_err(dev, "clk_prepare_enable failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Do not error out for consumer cases that live without a baud clock */
|
|
ssi->baudclk = devm_clk_get(dev, "baud");
|
|
if (IS_ERR(ssi->baudclk))
|
|
dev_dbg(dev, "failed to get baud clock: %ld\n",
|
|
PTR_ERR(ssi->baudclk));
|
|
|
|
ssi->dma_params_tx.maxburst = ssi->dma_maxburst;
|
|
ssi->dma_params_rx.maxburst = ssi->dma_maxburst;
|
|
ssi->dma_params_tx.addr = ssi->ssi_phys + REG_SSI_STX0;
|
|
ssi->dma_params_rx.addr = ssi->ssi_phys + REG_SSI_SRX0;
|
|
|
|
/* Use even numbers to avoid channel swap due to SDMA script design */
|
|
if (ssi->use_dual_fifo || ssi->use_dyna_fifo) {
|
|
ssi->dma_params_tx.maxburst &= ~0x1;
|
|
ssi->dma_params_rx.maxburst &= ~0x1;
|
|
}
|
|
|
|
if (!ssi->use_dma) {
|
|
/*
|
|
* Some boards use an incompatible codec. Use imx-fiq-pcm-audio
|
|
* to get it working, as DMA is not possible in this situation.
|
|
*/
|
|
ssi->fiq_params.irq = ssi->irq;
|
|
ssi->fiq_params.base = iomem;
|
|
ssi->fiq_params.dma_params_rx = &ssi->dma_params_rx;
|
|
ssi->fiq_params.dma_params_tx = &ssi->dma_params_tx;
|
|
|
|
ret = imx_pcm_fiq_init(pdev, &ssi->fiq_params);
|
|
if (ret)
|
|
goto error_pcm;
|
|
} else {
|
|
ret = imx_pcm_dma_init(pdev);
|
|
if (ret)
|
|
goto error_pcm;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_pcm:
|
|
if (!ssi->has_ipg_clk_name)
|
|
clk_disable_unprepare(ssi->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void fsl_ssi_imx_clean(struct platform_device *pdev, struct fsl_ssi *ssi)
|
|
{
|
|
if (!ssi->use_dma)
|
|
imx_pcm_fiq_exit(pdev);
|
|
if (!ssi->has_ipg_clk_name)
|
|
clk_disable_unprepare(ssi->clk);
|
|
}
|
|
|
|
static int fsl_ssi_probe_from_dt(struct fsl_ssi *ssi)
|
|
{
|
|
struct device *dev = ssi->dev;
|
|
struct device_node *np = dev->of_node;
|
|
const char *p, *sprop;
|
|
const __be32 *iprop;
|
|
u32 dmas[4];
|
|
int ret;
|
|
|
|
ret = of_property_match_string(np, "clock-names", "ipg");
|
|
/* Get error code if not found */
|
|
ssi->has_ipg_clk_name = ret >= 0;
|
|
|
|
/* Check if being used in AC97 mode */
|
|
sprop = of_get_property(np, "fsl,mode", NULL);
|
|
if (sprop && !strcmp(sprop, "ac97-slave")) {
|
|
ssi->dai_fmt = FSLSSI_AC97_DAIFMT;
|
|
|
|
ret = of_property_read_u32(np, "cell-index", &ssi->card_idx);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get SSI index property\n");
|
|
return -EINVAL;
|
|
}
|
|
strcpy(ssi->card_name, "ac97-codec");
|
|
} else if (!of_property_read_bool(np, "fsl,ssi-asynchronous")) {
|
|
/*
|
|
* In synchronous mode, STCK and STFS ports are used by RX
|
|
* as well. So the software should limit the sample rates,
|
|
* sample bits and channels to be symmetric.
|
|
*
|
|
* This is exclusive with FSLSSI_AC97_FORMATS as AC97 runs
|
|
* in the SSI synchronous mode however it does not have to
|
|
* limit symmetric sample rates and sample bits.
|
|
*/
|
|
ssi->synchronous = true;
|
|
}
|
|
|
|
/* Select DMA or FIQ */
|
|
ssi->use_dma = !of_property_read_bool(np, "fsl,fiq-stream-filter");
|
|
|
|
/* Fetch FIFO depth; Set to 8 for older DT without this property */
|
|
iprop = of_get_property(np, "fsl,fifo-depth", NULL);
|
|
if (iprop)
|
|
ssi->fifo_depth = be32_to_cpup(iprop);
|
|
else
|
|
ssi->fifo_depth = 8;
|
|
|
|
/* Use dual FIFO mode depending on the support from SDMA script */
|
|
ret = of_property_read_u32_array(np, "dmas", dmas, 4);
|
|
if (ssi->use_dma && !ret && dmas[2] == IMX_DMATYPE_SSI_DUAL)
|
|
ssi->use_dual_fifo = true;
|
|
|
|
if (ssi->use_dma && !ret && dmas[2] == IMX_DMATYPE_MULTI_SAI)
|
|
ssi->use_dyna_fifo = true;
|
|
/*
|
|
* Backward compatible for older bindings by manually triggering the
|
|
* machine driver's probe(). Use /compatible property, including the
|
|
* address of CPU DAI driver structure, as the name of machine driver
|
|
*
|
|
* If card_name is set by AC97 earlier, bypass here since it uses a
|
|
* different name to register the device.
|
|
*/
|
|
if (!ssi->card_name[0] && of_get_property(np, "codec-handle", NULL)) {
|
|
struct device_node *root = of_find_node_by_path("/");
|
|
|
|
sprop = of_get_property(root, "compatible", NULL);
|
|
of_node_put(root);
|
|
/* Strip "fsl," in the compatible name if applicable */
|
|
p = strrchr(sprop, ',');
|
|
if (p)
|
|
sprop = p + 1;
|
|
snprintf(ssi->card_name, sizeof(ssi->card_name),
|
|
"snd-soc-%s", sprop);
|
|
make_lowercase(ssi->card_name);
|
|
ssi->card_idx = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_ssi_probe(struct platform_device *pdev)
|
|
{
|
|
struct regmap_config regconfig = fsl_ssi_regconfig;
|
|
struct device *dev = &pdev->dev;
|
|
struct fsl_ssi *ssi;
|
|
struct resource *res;
|
|
void __iomem *iomem;
|
|
int ret = 0;
|
|
|
|
ssi = devm_kzalloc(dev, sizeof(*ssi), GFP_KERNEL);
|
|
if (!ssi)
|
|
return -ENOMEM;
|
|
|
|
ssi->dev = dev;
|
|
ssi->soc = of_device_get_match_data(&pdev->dev);
|
|
|
|
/* Probe from DT */
|
|
ret = fsl_ssi_probe_from_dt(ssi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (fsl_ssi_is_ac97(ssi)) {
|
|
memcpy(&ssi->cpu_dai_drv, &fsl_ssi_ac97_dai,
|
|
sizeof(fsl_ssi_ac97_dai));
|
|
fsl_ac97_data = ssi;
|
|
} else {
|
|
memcpy(&ssi->cpu_dai_drv, &fsl_ssi_dai_template,
|
|
sizeof(fsl_ssi_dai_template));
|
|
}
|
|
ssi->cpu_dai_drv.name = dev_name(dev);
|
|
|
|
iomem = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
|
|
if (IS_ERR(iomem))
|
|
return PTR_ERR(iomem);
|
|
ssi->ssi_phys = res->start;
|
|
|
|
if (ssi->soc->imx21regs) {
|
|
/* No SACC{ST,EN,DIS} regs in imx21-class SSI */
|
|
regconfig.max_register = REG_SSI_SRMSK;
|
|
regconfig.num_reg_defaults_raw =
|
|
REG_SSI_SRMSK / sizeof(uint32_t) + 1;
|
|
}
|
|
|
|
if (ssi->has_ipg_clk_name)
|
|
ssi->regs = devm_regmap_init_mmio_clk(dev, "ipg", iomem,
|
|
®config);
|
|
else
|
|
ssi->regs = devm_regmap_init_mmio(dev, iomem, ®config);
|
|
if (IS_ERR(ssi->regs)) {
|
|
dev_err(dev, "failed to init register map\n");
|
|
return PTR_ERR(ssi->regs);
|
|
}
|
|
|
|
ssi->irq = platform_get_irq(pdev, 0);
|
|
if (ssi->irq < 0)
|
|
return ssi->irq;
|
|
|
|
/* Set software limitations for synchronous mode except AC97 */
|
|
if (ssi->synchronous && !fsl_ssi_is_ac97(ssi)) {
|
|
ssi->cpu_dai_drv.symmetric_rate = 1;
|
|
ssi->cpu_dai_drv.symmetric_channels = 1;
|
|
ssi->cpu_dai_drv.symmetric_sample_bits = 1;
|
|
}
|
|
|
|
/*
|
|
* Configure TX and RX DMA watermarks -- when to send a DMA request
|
|
*
|
|
* Values should be tested to avoid FIFO under/over run. Set maxburst
|
|
* to fifo_watermark to maxiumize DMA transaction to reduce overhead.
|
|
*/
|
|
switch (ssi->fifo_depth) {
|
|
case 15:
|
|
/*
|
|
* Set to 8 as a balanced configuration -- When TX FIFO has 8
|
|
* empty slots, send a DMA request to fill these 8 slots. The
|
|
* remaining 7 slots should be able to allow DMA to finish the
|
|
* transaction before TX FIFO underruns; Same applies to RX.
|
|
*
|
|
* Tested with cases running at 48kHz @ 16 bits x 16 channels
|
|
*/
|
|
ssi->fifo_watermark = 8;
|
|
ssi->dma_maxburst = 8;
|
|
break;
|
|
case 8:
|
|
default:
|
|
/* Safely use old watermark configurations for older chips */
|
|
ssi->fifo_watermark = ssi->fifo_depth - 2;
|
|
ssi->dma_maxburst = ssi->fifo_depth - 2;
|
|
break;
|
|
}
|
|
|
|
dev_set_drvdata(dev, ssi);
|
|
|
|
if (ssi->soc->imx) {
|
|
ret = fsl_ssi_imx_probe(pdev, ssi, iomem);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (fsl_ssi_is_ac97(ssi)) {
|
|
mutex_init(&ssi->ac97_reg_lock);
|
|
ret = snd_soc_set_ac97_ops_of_reset(&fsl_ssi_ac97_ops, pdev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to set AC'97 ops\n");
|
|
goto error_ac97_ops;
|
|
}
|
|
}
|
|
|
|
ret = devm_snd_soc_register_component(dev, &fsl_ssi_component,
|
|
&ssi->cpu_dai_drv, 1);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register DAI: %d\n", ret);
|
|
goto error_asoc_register;
|
|
}
|
|
|
|
if (ssi->use_dma) {
|
|
ret = devm_request_irq(dev, ssi->irq, fsl_ssi_isr, 0,
|
|
dev_name(dev), ssi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to claim irq %u\n", ssi->irq);
|
|
goto error_asoc_register;
|
|
}
|
|
}
|
|
|
|
fsl_ssi_debugfs_create(&ssi->dbg_stats, dev);
|
|
|
|
/* Initially configures SSI registers */
|
|
fsl_ssi_hw_init(ssi);
|
|
|
|
/* Register a platform device for older bindings or AC97 */
|
|
if (ssi->card_name[0]) {
|
|
struct device *parent = dev;
|
|
/*
|
|
* Do not set SSI dev as the parent of AC97 CODEC device since
|
|
* it does not have a DT node. Otherwise ASoC core will assume
|
|
* CODEC has the same DT node as the SSI, so it may bypass the
|
|
* dai_probe() of SSI and then cause NULL DMA data pointers.
|
|
*/
|
|
if (fsl_ssi_is_ac97(ssi))
|
|
parent = NULL;
|
|
|
|
ssi->card_pdev = platform_device_register_data(parent,
|
|
ssi->card_name, ssi->card_idx, NULL, 0);
|
|
if (IS_ERR(ssi->card_pdev)) {
|
|
ret = PTR_ERR(ssi->card_pdev);
|
|
dev_err(dev, "failed to register %s: %d\n",
|
|
ssi->card_name, ret);
|
|
goto error_sound_card;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_sound_card:
|
|
fsl_ssi_debugfs_remove(&ssi->dbg_stats);
|
|
error_asoc_register:
|
|
if (fsl_ssi_is_ac97(ssi))
|
|
snd_soc_set_ac97_ops(NULL);
|
|
error_ac97_ops:
|
|
if (fsl_ssi_is_ac97(ssi))
|
|
mutex_destroy(&ssi->ac97_reg_lock);
|
|
|
|
if (ssi->soc->imx)
|
|
fsl_ssi_imx_clean(pdev, ssi);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void fsl_ssi_remove(struct platform_device *pdev)
|
|
{
|
|
struct fsl_ssi *ssi = dev_get_drvdata(&pdev->dev);
|
|
|
|
fsl_ssi_debugfs_remove(&ssi->dbg_stats);
|
|
|
|
if (ssi->card_pdev)
|
|
platform_device_unregister(ssi->card_pdev);
|
|
|
|
/* Clean up SSI registers */
|
|
fsl_ssi_hw_clean(ssi);
|
|
|
|
if (ssi->soc->imx)
|
|
fsl_ssi_imx_clean(pdev, ssi);
|
|
|
|
if (fsl_ssi_is_ac97(ssi)) {
|
|
snd_soc_set_ac97_ops(NULL);
|
|
mutex_destroy(&ssi->ac97_reg_lock);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int fsl_ssi_suspend(struct device *dev)
|
|
{
|
|
struct fsl_ssi *ssi = dev_get_drvdata(dev);
|
|
struct regmap *regs = ssi->regs;
|
|
|
|
regmap_read(regs, REG_SSI_SFCSR, &ssi->regcache_sfcsr);
|
|
regmap_read(regs, REG_SSI_SACNT, &ssi->regcache_sacnt);
|
|
|
|
regcache_cache_only(regs, true);
|
|
regcache_mark_dirty(regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_ssi_resume(struct device *dev)
|
|
{
|
|
struct fsl_ssi *ssi = dev_get_drvdata(dev);
|
|
struct regmap *regs = ssi->regs;
|
|
|
|
regcache_cache_only(regs, false);
|
|
|
|
regmap_update_bits(regs, REG_SSI_SFCSR,
|
|
SSI_SFCSR_RFWM1_MASK | SSI_SFCSR_TFWM1_MASK |
|
|
SSI_SFCSR_RFWM0_MASK | SSI_SFCSR_TFWM0_MASK,
|
|
ssi->regcache_sfcsr);
|
|
regmap_write(regs, REG_SSI_SACNT, ssi->regcache_sacnt);
|
|
|
|
return regcache_sync(regs);
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static const struct dev_pm_ops fsl_ssi_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(fsl_ssi_suspend, fsl_ssi_resume)
|
|
};
|
|
|
|
static struct platform_driver fsl_ssi_driver = {
|
|
.driver = {
|
|
.name = "fsl-ssi-dai",
|
|
.of_match_table = fsl_ssi_ids,
|
|
.pm = &fsl_ssi_pm,
|
|
},
|
|
.probe = fsl_ssi_probe,
|
|
.remove_new = fsl_ssi_remove,
|
|
};
|
|
|
|
module_platform_driver(fsl_ssi_driver);
|
|
|
|
MODULE_ALIAS("platform:fsl-ssi-dai");
|
|
MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
|
|
MODULE_DESCRIPTION("Freescale Synchronous Serial Interface (SSI) ASoC Driver");
|
|
MODULE_LICENSE("GPL v2");
|