mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Yang Shen](/assets/img/avatar_default.png)
Fixes the following W=1 kernel build warning(s): drivers/net/phy/adin.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/net/phy/rockchip.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
958 lines
23 KiB
C
958 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for Analog Devices Industrial Ethernet PHYs
|
|
*
|
|
* Copyright 2019 Analog Devices Inc.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ethtool_netlink.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/property.h>
|
|
|
|
#define PHY_ID_ADIN1200 0x0283bc20
|
|
#define PHY_ID_ADIN1300 0x0283bc30
|
|
|
|
#define ADIN1300_MII_EXT_REG_PTR 0x0010
|
|
#define ADIN1300_MII_EXT_REG_DATA 0x0011
|
|
|
|
#define ADIN1300_PHY_CTRL1 0x0012
|
|
#define ADIN1300_AUTO_MDI_EN BIT(10)
|
|
#define ADIN1300_MAN_MDIX_EN BIT(9)
|
|
#define ADIN1300_DIAG_CLK_EN BIT(2)
|
|
|
|
#define ADIN1300_RX_ERR_CNT 0x0014
|
|
|
|
#define ADIN1300_PHY_CTRL_STATUS2 0x0015
|
|
#define ADIN1300_NRG_PD_EN BIT(3)
|
|
#define ADIN1300_NRG_PD_TX_EN BIT(2)
|
|
#define ADIN1300_NRG_PD_STATUS BIT(1)
|
|
|
|
#define ADIN1300_PHY_CTRL2 0x0016
|
|
#define ADIN1300_DOWNSPEED_AN_100_EN BIT(11)
|
|
#define ADIN1300_DOWNSPEED_AN_10_EN BIT(10)
|
|
#define ADIN1300_GROUP_MDIO_EN BIT(6)
|
|
#define ADIN1300_DOWNSPEEDS_EN \
|
|
(ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN)
|
|
|
|
#define ADIN1300_PHY_CTRL3 0x0017
|
|
#define ADIN1300_LINKING_EN BIT(13)
|
|
#define ADIN1300_DOWNSPEED_RETRIES_MSK GENMASK(12, 10)
|
|
|
|
#define ADIN1300_INT_MASK_REG 0x0018
|
|
#define ADIN1300_INT_MDIO_SYNC_EN BIT(9)
|
|
#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8)
|
|
#define ADIN1300_INT_ANEG_PAGE_RX_EN BIT(6)
|
|
#define ADIN1300_INT_IDLE_ERR_CNT_EN BIT(5)
|
|
#define ADIN1300_INT_MAC_FIFO_OU_EN BIT(4)
|
|
#define ADIN1300_INT_RX_STAT_CHNG_EN BIT(3)
|
|
#define ADIN1300_INT_LINK_STAT_CHNG_EN BIT(2)
|
|
#define ADIN1300_INT_SPEED_CHNG_EN BIT(1)
|
|
#define ADIN1300_INT_HW_IRQ_EN BIT(0)
|
|
#define ADIN1300_INT_MASK_EN \
|
|
(ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN)
|
|
#define ADIN1300_INT_STATUS_REG 0x0019
|
|
|
|
#define ADIN1300_PHY_STATUS1 0x001a
|
|
#define ADIN1300_PAIR_01_SWAP BIT(11)
|
|
|
|
/* EEE register addresses, accessible via Clause 22 access using
|
|
* ADIN1300_MII_EXT_REG_PTR & ADIN1300_MII_EXT_REG_DATA.
|
|
* The bit-fields are the same as specified by IEEE for EEE.
|
|
*/
|
|
#define ADIN1300_EEE_CAP_REG 0x8000
|
|
#define ADIN1300_EEE_ADV_REG 0x8001
|
|
#define ADIN1300_EEE_LPABLE_REG 0x8002
|
|
#define ADIN1300_CLOCK_STOP_REG 0x9400
|
|
#define ADIN1300_LPI_WAKE_ERR_CNT_REG 0xa000
|
|
|
|
#define ADIN1300_CDIAG_RUN 0xba1b
|
|
#define ADIN1300_CDIAG_RUN_EN BIT(0)
|
|
|
|
/*
|
|
* The XSIM3/2/1 and XSHRT3/2/1 are actually relative.
|
|
* For CDIAG_DTLD_RSLTS(0) it's ADIN1300_CDIAG_RSLT_XSIM3/2/1
|
|
* For CDIAG_DTLD_RSLTS(1) it's ADIN1300_CDIAG_RSLT_XSIM3/2/0
|
|
* For CDIAG_DTLD_RSLTS(2) it's ADIN1300_CDIAG_RSLT_XSIM3/1/0
|
|
* For CDIAG_DTLD_RSLTS(3) it's ADIN1300_CDIAG_RSLT_XSIM2/1/0
|
|
*/
|
|
#define ADIN1300_CDIAG_DTLD_RSLTS(x) (0xba1d + (x))
|
|
#define ADIN1300_CDIAG_RSLT_BUSY BIT(10)
|
|
#define ADIN1300_CDIAG_RSLT_XSIM3 BIT(9)
|
|
#define ADIN1300_CDIAG_RSLT_XSIM2 BIT(8)
|
|
#define ADIN1300_CDIAG_RSLT_XSIM1 BIT(7)
|
|
#define ADIN1300_CDIAG_RSLT_SIM BIT(6)
|
|
#define ADIN1300_CDIAG_RSLT_XSHRT3 BIT(5)
|
|
#define ADIN1300_CDIAG_RSLT_XSHRT2 BIT(4)
|
|
#define ADIN1300_CDIAG_RSLT_XSHRT1 BIT(3)
|
|
#define ADIN1300_CDIAG_RSLT_SHRT BIT(2)
|
|
#define ADIN1300_CDIAG_RSLT_OPEN BIT(1)
|
|
#define ADIN1300_CDIAG_RSLT_GOOD BIT(0)
|
|
|
|
#define ADIN1300_CDIAG_FLT_DIST(x) (0xba21 + (x))
|
|
|
|
#define ADIN1300_GE_SOFT_RESET_REG 0xff0c
|
|
#define ADIN1300_GE_SOFT_RESET BIT(0)
|
|
|
|
#define ADIN1300_GE_RGMII_CFG_REG 0xff23
|
|
#define ADIN1300_GE_RGMII_RX_MSK GENMASK(8, 6)
|
|
#define ADIN1300_GE_RGMII_RX_SEL(x) \
|
|
FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x)
|
|
#define ADIN1300_GE_RGMII_GTX_MSK GENMASK(5, 3)
|
|
#define ADIN1300_GE_RGMII_GTX_SEL(x) \
|
|
FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x)
|
|
#define ADIN1300_GE_RGMII_RXID_EN BIT(2)
|
|
#define ADIN1300_GE_RGMII_TXID_EN BIT(1)
|
|
#define ADIN1300_GE_RGMII_EN BIT(0)
|
|
|
|
/* RGMII internal delay settings for rx and tx for ADIN1300 */
|
|
#define ADIN1300_RGMII_1_60_NS 0x0001
|
|
#define ADIN1300_RGMII_1_80_NS 0x0002
|
|
#define ADIN1300_RGMII_2_00_NS 0x0000
|
|
#define ADIN1300_RGMII_2_20_NS 0x0006
|
|
#define ADIN1300_RGMII_2_40_NS 0x0007
|
|
|
|
#define ADIN1300_GE_RMII_CFG_REG 0xff24
|
|
#define ADIN1300_GE_RMII_FIFO_DEPTH_MSK GENMASK(6, 4)
|
|
#define ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x) \
|
|
FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x)
|
|
#define ADIN1300_GE_RMII_EN BIT(0)
|
|
|
|
/* RMII fifo depth values */
|
|
#define ADIN1300_RMII_4_BITS 0x0000
|
|
#define ADIN1300_RMII_8_BITS 0x0001
|
|
#define ADIN1300_RMII_12_BITS 0x0002
|
|
#define ADIN1300_RMII_16_BITS 0x0003
|
|
#define ADIN1300_RMII_20_BITS 0x0004
|
|
#define ADIN1300_RMII_24_BITS 0x0005
|
|
|
|
/**
|
|
* struct adin_cfg_reg_map - map a config value to aregister value
|
|
* @cfg: value in device configuration
|
|
* @reg: value in the register
|
|
*/
|
|
struct adin_cfg_reg_map {
|
|
int cfg;
|
|
int reg;
|
|
};
|
|
|
|
static const struct adin_cfg_reg_map adin_rgmii_delays[] = {
|
|
{ 1600, ADIN1300_RGMII_1_60_NS },
|
|
{ 1800, ADIN1300_RGMII_1_80_NS },
|
|
{ 2000, ADIN1300_RGMII_2_00_NS },
|
|
{ 2200, ADIN1300_RGMII_2_20_NS },
|
|
{ 2400, ADIN1300_RGMII_2_40_NS },
|
|
{ },
|
|
};
|
|
|
|
static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = {
|
|
{ 4, ADIN1300_RMII_4_BITS },
|
|
{ 8, ADIN1300_RMII_8_BITS },
|
|
{ 12, ADIN1300_RMII_12_BITS },
|
|
{ 16, ADIN1300_RMII_16_BITS },
|
|
{ 20, ADIN1300_RMII_20_BITS },
|
|
{ 24, ADIN1300_RMII_24_BITS },
|
|
{ },
|
|
};
|
|
|
|
/**
|
|
* struct adin_clause45_mmd_map - map to convert Clause 45 regs to Clause 22
|
|
* @devad: device address used in Clause 45 access
|
|
* @cl45_regnum: register address defined by Clause 45
|
|
* @adin_regnum: equivalent register address accessible via Clause 22
|
|
*/
|
|
struct adin_clause45_mmd_map {
|
|
int devad;
|
|
u16 cl45_regnum;
|
|
u16 adin_regnum;
|
|
};
|
|
|
|
static const struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
|
|
{ MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE, ADIN1300_EEE_CAP_REG },
|
|
{ MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, ADIN1300_EEE_LPABLE_REG },
|
|
{ MDIO_MMD_AN, MDIO_AN_EEE_ADV, ADIN1300_EEE_ADV_REG },
|
|
{ MDIO_MMD_PCS, MDIO_CTRL1, ADIN1300_CLOCK_STOP_REG },
|
|
{ MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR, ADIN1300_LPI_WAKE_ERR_CNT_REG },
|
|
};
|
|
|
|
struct adin_hw_stat {
|
|
const char *string;
|
|
u16 reg1;
|
|
u16 reg2;
|
|
};
|
|
|
|
static const struct adin_hw_stat adin_hw_stats[] = {
|
|
{ "total_frames_checked_count", 0x940A, 0x940B }, /* hi + lo */
|
|
{ "length_error_frames_count", 0x940C },
|
|
{ "alignment_error_frames_count", 0x940D },
|
|
{ "symbol_error_count", 0x940E },
|
|
{ "oversized_frames_count", 0x940F },
|
|
{ "undersized_frames_count", 0x9410 },
|
|
{ "odd_nibble_frames_count", 0x9411 },
|
|
{ "odd_preamble_packet_count", 0x9412 },
|
|
{ "dribble_bits_frames_count", 0x9413 },
|
|
{ "false_carrier_events_count", 0x9414 },
|
|
};
|
|
|
|
/**
|
|
* struct adin_priv - ADIN PHY driver private data
|
|
* @stats: statistic counters for the PHY
|
|
*/
|
|
struct adin_priv {
|
|
u64 stats[ARRAY_SIZE(adin_hw_stats)];
|
|
};
|
|
|
|
static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
|
|
{
|
|
size_t i;
|
|
|
|
for (i = 0; tbl[i].cfg; i++) {
|
|
if (tbl[i].cfg == cfg)
|
|
return tbl[i].reg;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static u32 adin_get_reg_value(struct phy_device *phydev,
|
|
const char *prop_name,
|
|
const struct adin_cfg_reg_map *tbl,
|
|
u32 dflt)
|
|
{
|
|
struct device *dev = &phydev->mdio.dev;
|
|
u32 val;
|
|
int rc;
|
|
|
|
if (device_property_read_u32(dev, prop_name, &val))
|
|
return dflt;
|
|
|
|
rc = adin_lookup_reg_value(tbl, val);
|
|
if (rc < 0) {
|
|
phydev_warn(phydev,
|
|
"Unsupported value %u for %s using default (%u)\n",
|
|
val, prop_name, dflt);
|
|
return dflt;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int adin_config_rgmii_mode(struct phy_device *phydev)
|
|
{
|
|
u32 val;
|
|
int reg;
|
|
|
|
if (!phy_interface_is_rgmii(phydev))
|
|
return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
ADIN1300_GE_RGMII_CFG_REG,
|
|
ADIN1300_GE_RGMII_EN);
|
|
|
|
reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg |= ADIN1300_GE_RGMII_EN;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
|
|
reg |= ADIN1300_GE_RGMII_RXID_EN;
|
|
|
|
val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps",
|
|
adin_rgmii_delays,
|
|
ADIN1300_RGMII_2_00_NS);
|
|
reg &= ~ADIN1300_GE_RGMII_RX_MSK;
|
|
reg |= ADIN1300_GE_RGMII_RX_SEL(val);
|
|
} else {
|
|
reg &= ~ADIN1300_GE_RGMII_RXID_EN;
|
|
}
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
|
|
reg |= ADIN1300_GE_RGMII_TXID_EN;
|
|
|
|
val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps",
|
|
adin_rgmii_delays,
|
|
ADIN1300_RGMII_2_00_NS);
|
|
reg &= ~ADIN1300_GE_RGMII_GTX_MSK;
|
|
reg |= ADIN1300_GE_RGMII_GTX_SEL(val);
|
|
} else {
|
|
reg &= ~ADIN1300_GE_RGMII_TXID_EN;
|
|
}
|
|
|
|
return phy_write_mmd(phydev, MDIO_MMD_VEND1,
|
|
ADIN1300_GE_RGMII_CFG_REG, reg);
|
|
}
|
|
|
|
static int adin_config_rmii_mode(struct phy_device *phydev)
|
|
{
|
|
u32 val;
|
|
int reg;
|
|
|
|
if (phydev->interface != PHY_INTERFACE_MODE_RMII)
|
|
return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
ADIN1300_GE_RMII_CFG_REG,
|
|
ADIN1300_GE_RMII_EN);
|
|
|
|
reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg |= ADIN1300_GE_RMII_EN;
|
|
|
|
val = adin_get_reg_value(phydev, "adi,fifo-depth-bits",
|
|
adin_rmii_fifo_depths,
|
|
ADIN1300_RMII_8_BITS);
|
|
|
|
reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK;
|
|
reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val);
|
|
|
|
return phy_write_mmd(phydev, MDIO_MMD_VEND1,
|
|
ADIN1300_GE_RMII_CFG_REG, reg);
|
|
}
|
|
|
|
static int adin_get_downshift(struct phy_device *phydev, u8 *data)
|
|
{
|
|
int val, cnt, enable;
|
|
|
|
val = phy_read(phydev, ADIN1300_PHY_CTRL2);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
cnt = phy_read(phydev, ADIN1300_PHY_CTRL3);
|
|
if (cnt < 0)
|
|
return cnt;
|
|
|
|
enable = FIELD_GET(ADIN1300_DOWNSPEEDS_EN, val);
|
|
cnt = FIELD_GET(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);
|
|
|
|
*data = (enable && cnt) ? cnt : DOWNSHIFT_DEV_DISABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adin_set_downshift(struct phy_device *phydev, u8 cnt)
|
|
{
|
|
u16 val;
|
|
int rc;
|
|
|
|
if (cnt == DOWNSHIFT_DEV_DISABLE)
|
|
return phy_clear_bits(phydev, ADIN1300_PHY_CTRL2,
|
|
ADIN1300_DOWNSPEEDS_EN);
|
|
|
|
if (cnt > 7)
|
|
return -E2BIG;
|
|
|
|
val = FIELD_PREP(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);
|
|
|
|
rc = phy_modify(phydev, ADIN1300_PHY_CTRL3,
|
|
ADIN1300_DOWNSPEED_RETRIES_MSK,
|
|
val);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return phy_set_bits(phydev, ADIN1300_PHY_CTRL2,
|
|
ADIN1300_DOWNSPEEDS_EN);
|
|
}
|
|
|
|
static int adin_get_edpd(struct phy_device *phydev, u16 *tx_interval)
|
|
{
|
|
int val;
|
|
|
|
val = phy_read(phydev, ADIN1300_PHY_CTRL_STATUS2);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (ADIN1300_NRG_PD_EN & val) {
|
|
if (val & ADIN1300_NRG_PD_TX_EN)
|
|
/* default is 1 second */
|
|
*tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS;
|
|
else
|
|
*tx_interval = ETHTOOL_PHY_EDPD_NO_TX;
|
|
} else {
|
|
*tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval)
|
|
{
|
|
u16 val;
|
|
|
|
if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE)
|
|
return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2,
|
|
(ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN));
|
|
|
|
val = ADIN1300_NRG_PD_EN;
|
|
|
|
switch (tx_interval) {
|
|
case 1000: /* 1 second */
|
|
fallthrough;
|
|
case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
|
|
val |= ADIN1300_NRG_PD_TX_EN;
|
|
fallthrough;
|
|
case ETHTOOL_PHY_EDPD_NO_TX:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return phy_modify(phydev, ADIN1300_PHY_CTRL_STATUS2,
|
|
(ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN),
|
|
val);
|
|
}
|
|
|
|
static int adin_get_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return adin_get_downshift(phydev, data);
|
|
case ETHTOOL_PHY_EDPD:
|
|
return adin_get_edpd(phydev, data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int adin_set_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, const void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return adin_set_downshift(phydev, *(const u8 *)data);
|
|
case ETHTOOL_PHY_EDPD:
|
|
return adin_set_edpd(phydev, *(const u16 *)data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int adin_config_init(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
|
|
|
|
rc = adin_config_rgmii_mode(phydev);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = adin_config_rmii_mode(phydev);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = adin_set_downshift(phydev, 4);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = adin_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
phydev_dbg(phydev, "PHY is using mode '%s'\n",
|
|
phy_modes(phydev->interface));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adin_phy_ack_intr(struct phy_device *phydev)
|
|
{
|
|
/* Clear pending interrupts */
|
|
int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG);
|
|
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int adin_phy_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
err = adin_phy_ack_intr(phydev);
|
|
if (err)
|
|
return err;
|
|
|
|
err = phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
|
|
ADIN1300_INT_MASK_EN);
|
|
} else {
|
|
err = phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
|
|
ADIN1300_INT_MASK_EN);
|
|
if (err)
|
|
return err;
|
|
|
|
err = adin_phy_ack_intr(phydev);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static irqreturn_t adin_phy_handle_interrupt(struct phy_device *phydev)
|
|
{
|
|
int irq_status;
|
|
|
|
irq_status = phy_read(phydev, ADIN1300_INT_STATUS_REG);
|
|
if (irq_status < 0) {
|
|
phy_error(phydev);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (!(irq_status & ADIN1300_INT_LINK_STAT_CHNG_EN))
|
|
return IRQ_NONE;
|
|
|
|
phy_trigger_machine(phydev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad,
|
|
u16 cl45_regnum)
|
|
{
|
|
const struct adin_clause45_mmd_map *m;
|
|
int i;
|
|
|
|
if (devad == MDIO_MMD_VEND1)
|
|
return cl45_regnum;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adin_clause45_mmd_map); i++) {
|
|
m = &adin_clause45_mmd_map[i];
|
|
if (m->devad == devad && m->cl45_regnum == cl45_regnum)
|
|
return m->adin_regnum;
|
|
}
|
|
|
|
phydev_err(phydev,
|
|
"No translation available for devad: %d reg: %04x\n",
|
|
devad, cl45_regnum);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
|
|
{
|
|
struct mii_bus *bus = phydev->mdio.bus;
|
|
int phy_addr = phydev->mdio.addr;
|
|
int adin_regnum;
|
|
int err;
|
|
|
|
adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
|
|
if (adin_regnum < 0)
|
|
return adin_regnum;
|
|
|
|
err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
|
|
adin_regnum);
|
|
if (err)
|
|
return err;
|
|
|
|
return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
|
|
}
|
|
|
|
static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
|
|
u16 val)
|
|
{
|
|
struct mii_bus *bus = phydev->mdio.bus;
|
|
int phy_addr = phydev->mdio.addr;
|
|
int adin_regnum;
|
|
int err;
|
|
|
|
adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
|
|
if (adin_regnum < 0)
|
|
return adin_regnum;
|
|
|
|
err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
|
|
adin_regnum);
|
|
if (err)
|
|
return err;
|
|
|
|
return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
|
|
}
|
|
|
|
static int adin_config_mdix(struct phy_device *phydev)
|
|
{
|
|
bool auto_en, mdix_en;
|
|
int reg;
|
|
|
|
mdix_en = false;
|
|
auto_en = false;
|
|
switch (phydev->mdix_ctrl) {
|
|
case ETH_TP_MDI:
|
|
break;
|
|
case ETH_TP_MDI_X:
|
|
mdix_en = true;
|
|
break;
|
|
case ETH_TP_MDI_AUTO:
|
|
auto_en = true;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
if (mdix_en)
|
|
reg |= ADIN1300_MAN_MDIX_EN;
|
|
else
|
|
reg &= ~ADIN1300_MAN_MDIX_EN;
|
|
|
|
if (auto_en)
|
|
reg |= ADIN1300_AUTO_MDI_EN;
|
|
else
|
|
reg &= ~ADIN1300_AUTO_MDI_EN;
|
|
|
|
return phy_write(phydev, ADIN1300_PHY_CTRL1, reg);
|
|
}
|
|
|
|
static int adin_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL1, ADIN1300_DIAG_CLK_EN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = phy_set_bits(phydev, ADIN1300_PHY_CTRL3, ADIN1300_LINKING_EN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = adin_config_mdix(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int adin_mdix_update(struct phy_device *phydev)
|
|
{
|
|
bool auto_en, mdix_en;
|
|
bool swapped;
|
|
int reg;
|
|
|
|
reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
auto_en = !!(reg & ADIN1300_AUTO_MDI_EN);
|
|
mdix_en = !!(reg & ADIN1300_MAN_MDIX_EN);
|
|
|
|
/* If MDI/MDIX is forced, just read it from the control reg */
|
|
if (!auto_en) {
|
|
if (mdix_en)
|
|
phydev->mdix = ETH_TP_MDI_X;
|
|
else
|
|
phydev->mdix = ETH_TP_MDI;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Otherwise, we need to deduce it from the PHY status2 reg.
|
|
* When Auto-MDI is enabled, the ADIN1300_MAN_MDIX_EN bit implies
|
|
* a preference for MDIX when it is set.
|
|
*/
|
|
reg = phy_read(phydev, ADIN1300_PHY_STATUS1);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
swapped = !!(reg & ADIN1300_PAIR_01_SWAP);
|
|
|
|
if (mdix_en != swapped)
|
|
phydev->mdix = ETH_TP_MDI_X;
|
|
else
|
|
phydev->mdix = ETH_TP_MDI;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adin_read_status(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = adin_mdix_update(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return genphy_read_status(phydev);
|
|
}
|
|
|
|
static int adin_soft_reset(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
/* The reset bit is self-clearing, set it and wait */
|
|
rc = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
|
|
ADIN1300_GE_SOFT_RESET_REG,
|
|
ADIN1300_GE_SOFT_RESET);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
msleep(20);
|
|
|
|
/* If we get a read error something may be wrong */
|
|
rc = phy_read_mmd(phydev, MDIO_MMD_VEND1,
|
|
ADIN1300_GE_SOFT_RESET_REG);
|
|
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int adin_get_sset_count(struct phy_device *phydev)
|
|
{
|
|
return ARRAY_SIZE(adin_hw_stats);
|
|
}
|
|
|
|
static void adin_get_strings(struct phy_device *phydev, u8 *data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) {
|
|
strlcpy(&data[i * ETH_GSTRING_LEN],
|
|
adin_hw_stats[i].string, ETH_GSTRING_LEN);
|
|
}
|
|
}
|
|
|
|
static int adin_read_mmd_stat_regs(struct phy_device *phydev,
|
|
const struct adin_hw_stat *stat,
|
|
u32 *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = (ret & 0xffff);
|
|
|
|
if (stat->reg2 == 0)
|
|
return 0;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val <<= 16;
|
|
*val |= (ret & 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64 adin_get_stat(struct phy_device *phydev, int i)
|
|
{
|
|
const struct adin_hw_stat *stat = &adin_hw_stats[i];
|
|
struct adin_priv *priv = phydev->priv;
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (stat->reg1 > 0x1f) {
|
|
ret = adin_read_mmd_stat_regs(phydev, stat, &val);
|
|
if (ret < 0)
|
|
return (u64)(~0);
|
|
} else {
|
|
ret = phy_read(phydev, stat->reg1);
|
|
if (ret < 0)
|
|
return (u64)(~0);
|
|
val = (ret & 0xffff);
|
|
}
|
|
|
|
priv->stats[i] += val;
|
|
|
|
return priv->stats[i];
|
|
}
|
|
|
|
static void adin_get_stats(struct phy_device *phydev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
int i, rc;
|
|
|
|
/* latch copies of all the frame-checker counters */
|
|
rc = phy_read(phydev, ADIN1300_RX_ERR_CNT);
|
|
if (rc < 0)
|
|
return;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++)
|
|
data[i] = adin_get_stat(phydev, i);
|
|
}
|
|
|
|
static int adin_probe(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct adin_priv *priv;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = priv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adin_cable_test_start(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL3, ADIN1300_LINKING_EN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL1, ADIN1300_DIAG_CLK_EN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* wait a bit for the clock to stabilize */
|
|
msleep(50);
|
|
|
|
return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_CDIAG_RUN,
|
|
ADIN1300_CDIAG_RUN_EN);
|
|
}
|
|
|
|
static int adin_cable_test_report_trans(int result)
|
|
{
|
|
int mask;
|
|
|
|
if (result & ADIN1300_CDIAG_RSLT_GOOD)
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_OK;
|
|
if (result & ADIN1300_CDIAG_RSLT_OPEN)
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
|
|
|
|
/* short with other pairs */
|
|
mask = ADIN1300_CDIAG_RSLT_XSHRT3 |
|
|
ADIN1300_CDIAG_RSLT_XSHRT2 |
|
|
ADIN1300_CDIAG_RSLT_XSHRT1;
|
|
if (result & mask)
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
|
|
|
|
if (result & ADIN1300_CDIAG_RSLT_SHRT)
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
|
|
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
|
|
}
|
|
|
|
static int adin_cable_test_report_pair(struct phy_device *phydev,
|
|
unsigned int pair)
|
|
{
|
|
int fault_rslt;
|
|
int ret;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
|
|
ADIN1300_CDIAG_DTLD_RSLTS(pair));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
fault_rslt = adin_cable_test_report_trans(ret);
|
|
|
|
ret = ethnl_cable_test_result(phydev, pair, fault_rslt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
|
|
ADIN1300_CDIAG_FLT_DIST(pair));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (fault_rslt) {
|
|
case ETHTOOL_A_CABLE_RESULT_CODE_OPEN:
|
|
case ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT:
|
|
case ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT:
|
|
return ethnl_cable_test_fault_length(phydev, pair, ret * 100);
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int adin_cable_test_report(struct phy_device *phydev)
|
|
{
|
|
unsigned int pair;
|
|
int ret;
|
|
|
|
for (pair = ETHTOOL_A_CABLE_PAIR_A; pair <= ETHTOOL_A_CABLE_PAIR_D; pair++) {
|
|
ret = adin_cable_test_report_pair(phydev, pair);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adin_cable_test_get_status(struct phy_device *phydev,
|
|
bool *finished)
|
|
{
|
|
int ret;
|
|
|
|
*finished = false;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_CDIAG_RUN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & ADIN1300_CDIAG_RUN_EN)
|
|
return 0;
|
|
|
|
*finished = true;
|
|
|
|
return adin_cable_test_report(phydev);
|
|
}
|
|
|
|
static struct phy_driver adin_driver[] = {
|
|
{
|
|
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
|
|
.name = "ADIN1200",
|
|
.flags = PHY_POLL_CABLE_TEST,
|
|
.probe = adin_probe,
|
|
.config_init = adin_config_init,
|
|
.soft_reset = adin_soft_reset,
|
|
.config_aneg = adin_config_aneg,
|
|
.read_status = adin_read_status,
|
|
.get_tunable = adin_get_tunable,
|
|
.set_tunable = adin_set_tunable,
|
|
.config_intr = adin_phy_config_intr,
|
|
.handle_interrupt = adin_phy_handle_interrupt,
|
|
.get_sset_count = adin_get_sset_count,
|
|
.get_strings = adin_get_strings,
|
|
.get_stats = adin_get_stats,
|
|
.resume = genphy_resume,
|
|
.suspend = genphy_suspend,
|
|
.read_mmd = adin_read_mmd,
|
|
.write_mmd = adin_write_mmd,
|
|
.cable_test_start = adin_cable_test_start,
|
|
.cable_test_get_status = adin_cable_test_get_status,
|
|
},
|
|
{
|
|
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
|
|
.name = "ADIN1300",
|
|
.flags = PHY_POLL_CABLE_TEST,
|
|
.probe = adin_probe,
|
|
.config_init = adin_config_init,
|
|
.soft_reset = adin_soft_reset,
|
|
.config_aneg = adin_config_aneg,
|
|
.read_status = adin_read_status,
|
|
.get_tunable = adin_get_tunable,
|
|
.set_tunable = adin_set_tunable,
|
|
.config_intr = adin_phy_config_intr,
|
|
.handle_interrupt = adin_phy_handle_interrupt,
|
|
.get_sset_count = adin_get_sset_count,
|
|
.get_strings = adin_get_strings,
|
|
.get_stats = adin_get_stats,
|
|
.resume = genphy_resume,
|
|
.suspend = genphy_suspend,
|
|
.read_mmd = adin_read_mmd,
|
|
.write_mmd = adin_write_mmd,
|
|
.cable_test_start = adin_cable_test_start,
|
|
.cable_test_get_status = adin_cable_test_get_status,
|
|
},
|
|
};
|
|
|
|
module_phy_driver(adin_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused adin_tbl[] = {
|
|
{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) },
|
|
{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, adin_tbl);
|
|
MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver");
|
|
MODULE_LICENSE("GPL");
|