mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Praneeth Bajjuri](/assets/img/avatar_default.png)
Current logic is performing hard reset and causing the programmed registers to be wiped out. as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf 8.6.26 Control Register (CTRL) do SW_RESTART to perform a reset not including the registers, If performed when link is already present, it will drop the link and trigger re-auto negotiation. Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Geet Modi <geet.modi@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
876 lines
24 KiB
C
876 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Driver for the Texas Instruments DP83867 PHY
|
|
*
|
|
* Copyright (C) 2015 Texas Instruments Inc.
|
|
*/
|
|
|
|
#include <linux/ethtool.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
|
|
#define DP83867_PHY_ID 0x2000a231
|
|
#define DP83867_DEVADDR 0x1f
|
|
|
|
#define MII_DP83867_PHYCTRL 0x10
|
|
#define MII_DP83867_PHYSTS 0x11
|
|
#define MII_DP83867_MICR 0x12
|
|
#define MII_DP83867_ISR 0x13
|
|
#define DP83867_CFG2 0x14
|
|
#define DP83867_CFG3 0x1e
|
|
#define DP83867_CTRL 0x1f
|
|
|
|
/* Extended Registers */
|
|
#define DP83867_FLD_THR_CFG 0x002e
|
|
#define DP83867_CFG4 0x0031
|
|
#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6))
|
|
#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5)
|
|
#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5)
|
|
#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5)
|
|
#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5)
|
|
|
|
#define DP83867_RGMIICTL 0x0032
|
|
#define DP83867_STRAP_STS1 0x006E
|
|
#define DP83867_STRAP_STS2 0x006f
|
|
#define DP83867_RGMIIDCTL 0x0086
|
|
#define DP83867_RXFCFG 0x0134
|
|
#define DP83867_RXFPMD1 0x0136
|
|
#define DP83867_RXFPMD2 0x0137
|
|
#define DP83867_RXFPMD3 0x0138
|
|
#define DP83867_RXFSOP1 0x0139
|
|
#define DP83867_RXFSOP2 0x013A
|
|
#define DP83867_RXFSOP3 0x013B
|
|
#define DP83867_IO_MUX_CFG 0x0170
|
|
#define DP83867_SGMIICTL 0x00D3
|
|
#define DP83867_10M_SGMII_CFG 0x016F
|
|
#define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7)
|
|
|
|
#define DP83867_SW_RESET BIT(15)
|
|
#define DP83867_SW_RESTART BIT(14)
|
|
|
|
/* MICR Interrupt bits */
|
|
#define MII_DP83867_MICR_AN_ERR_INT_EN BIT(15)
|
|
#define MII_DP83867_MICR_SPEED_CHNG_INT_EN BIT(14)
|
|
#define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN BIT(13)
|
|
#define MII_DP83867_MICR_PAGE_RXD_INT_EN BIT(12)
|
|
#define MII_DP83867_MICR_AUTONEG_COMP_INT_EN BIT(11)
|
|
#define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN BIT(10)
|
|
#define MII_DP83867_MICR_FALSE_CARRIER_INT_EN BIT(8)
|
|
#define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4)
|
|
#define MII_DP83867_MICR_WOL_INT_EN BIT(3)
|
|
#define MII_DP83867_MICR_XGMII_ERR_INT_EN BIT(2)
|
|
#define MII_DP83867_MICR_POL_CHNG_INT_EN BIT(1)
|
|
#define MII_DP83867_MICR_JABBER_INT_EN BIT(0)
|
|
|
|
/* RGMIICTL bits */
|
|
#define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1)
|
|
#define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0)
|
|
|
|
/* SGMIICTL bits */
|
|
#define DP83867_SGMII_TYPE BIT(14)
|
|
|
|
/* RXFCFG bits*/
|
|
#define DP83867_WOL_MAGIC_EN BIT(0)
|
|
#define DP83867_WOL_BCAST_EN BIT(2)
|
|
#define DP83867_WOL_UCAST_EN BIT(4)
|
|
#define DP83867_WOL_SEC_EN BIT(5)
|
|
#define DP83867_WOL_ENH_MAC BIT(7)
|
|
|
|
/* STRAP_STS1 bits */
|
|
#define DP83867_STRAP_STS1_RESERVED BIT(11)
|
|
|
|
/* STRAP_STS2 bits */
|
|
#define DP83867_STRAP_STS2_CLK_SKEW_TX_MASK GENMASK(6, 4)
|
|
#define DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT 4
|
|
#define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK GENMASK(2, 0)
|
|
#define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT 0
|
|
#define DP83867_STRAP_STS2_CLK_SKEW_NONE BIT(2)
|
|
#define DP83867_STRAP_STS2_STRAP_FLD BIT(10)
|
|
|
|
/* PHY CTRL bits */
|
|
#define DP83867_PHYCR_TX_FIFO_DEPTH_SHIFT 14
|
|
#define DP83867_PHYCR_RX_FIFO_DEPTH_SHIFT 12
|
|
#define DP83867_PHYCR_FIFO_DEPTH_MAX 0x03
|
|
#define DP83867_PHYCR_TX_FIFO_DEPTH_MASK GENMASK(15, 14)
|
|
#define DP83867_PHYCR_RX_FIFO_DEPTH_MASK GENMASK(13, 12)
|
|
#define DP83867_PHYCR_RESERVED_MASK BIT(11)
|
|
#define DP83867_PHYCR_FORCE_LINK_GOOD BIT(10)
|
|
|
|
/* RGMIIDCTL bits */
|
|
#define DP83867_RGMII_TX_CLK_DELAY_MAX 0xf
|
|
#define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4
|
|
#define DP83867_RGMII_TX_CLK_DELAY_INV (DP83867_RGMII_TX_CLK_DELAY_MAX + 1)
|
|
#define DP83867_RGMII_RX_CLK_DELAY_MAX 0xf
|
|
#define DP83867_RGMII_RX_CLK_DELAY_SHIFT 0
|
|
#define DP83867_RGMII_RX_CLK_DELAY_INV (DP83867_RGMII_RX_CLK_DELAY_MAX + 1)
|
|
|
|
/* IO_MUX_CFG bits */
|
|
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MASK 0x1f
|
|
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
|
|
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
|
|
#define DP83867_IO_MUX_CFG_CLK_O_DISABLE BIT(6)
|
|
#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8)
|
|
#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
|
|
|
|
/* PHY STS bits */
|
|
#define DP83867_PHYSTS_1000 BIT(15)
|
|
#define DP83867_PHYSTS_100 BIT(14)
|
|
#define DP83867_PHYSTS_DUPLEX BIT(13)
|
|
#define DP83867_PHYSTS_LINK BIT(10)
|
|
|
|
/* CFG2 bits */
|
|
#define DP83867_DOWNSHIFT_EN (BIT(8) | BIT(9))
|
|
#define DP83867_DOWNSHIFT_ATTEMPT_MASK (BIT(10) | BIT(11))
|
|
#define DP83867_DOWNSHIFT_1_COUNT_VAL 0
|
|
#define DP83867_DOWNSHIFT_2_COUNT_VAL 1
|
|
#define DP83867_DOWNSHIFT_4_COUNT_VAL 2
|
|
#define DP83867_DOWNSHIFT_8_COUNT_VAL 3
|
|
#define DP83867_DOWNSHIFT_1_COUNT 1
|
|
#define DP83867_DOWNSHIFT_2_COUNT 2
|
|
#define DP83867_DOWNSHIFT_4_COUNT 4
|
|
#define DP83867_DOWNSHIFT_8_COUNT 8
|
|
|
|
/* CFG3 bits */
|
|
#define DP83867_CFG3_INT_OE BIT(7)
|
|
#define DP83867_CFG3_ROBUST_AUTO_MDIX BIT(9)
|
|
|
|
/* CFG4 bits */
|
|
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
|
|
|
|
/* FLD_THR_CFG */
|
|
#define DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK 0x7
|
|
|
|
enum {
|
|
DP83867_PORT_MIRROING_KEEP,
|
|
DP83867_PORT_MIRROING_EN,
|
|
DP83867_PORT_MIRROING_DIS,
|
|
};
|
|
|
|
struct dp83867_private {
|
|
u32 rx_id_delay;
|
|
u32 tx_id_delay;
|
|
u32 tx_fifo_depth;
|
|
u32 rx_fifo_depth;
|
|
int io_impedance;
|
|
int port_mirroring;
|
|
bool rxctrl_strap_quirk;
|
|
bool set_clk_output;
|
|
u32 clk_output_sel;
|
|
bool sgmii_ref_clk_en;
|
|
};
|
|
|
|
static int dp83867_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err = phy_read(phydev, MII_DP83867_ISR);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83867_set_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct net_device *ndev = phydev->attached_dev;
|
|
u16 val_rxcfg, val_micr;
|
|
u8 *mac;
|
|
|
|
val_rxcfg = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RXFCFG);
|
|
val_micr = phy_read(phydev, MII_DP83867_MICR);
|
|
|
|
if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_UCAST |
|
|
WAKE_BCAST)) {
|
|
val_rxcfg |= DP83867_WOL_ENH_MAC;
|
|
val_micr |= MII_DP83867_MICR_WOL_INT_EN;
|
|
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
mac = (u8 *)ndev->dev_addr;
|
|
|
|
if (!is_valid_ether_addr(mac))
|
|
return -EINVAL;
|
|
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RXFPMD1,
|
|
(mac[1] << 8 | mac[0]));
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RXFPMD2,
|
|
(mac[3] << 8 | mac[2]));
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RXFPMD3,
|
|
(mac[5] << 8 | mac[4]));
|
|
|
|
val_rxcfg |= DP83867_WOL_MAGIC_EN;
|
|
} else {
|
|
val_rxcfg &= ~DP83867_WOL_MAGIC_EN;
|
|
}
|
|
|
|
if (wol->wolopts & WAKE_MAGICSECURE) {
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RXFSOP1,
|
|
(wol->sopass[1] << 8) | wol->sopass[0]);
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RXFSOP2,
|
|
(wol->sopass[3] << 8) | wol->sopass[2]);
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RXFSOP3,
|
|
(wol->sopass[5] << 8) | wol->sopass[4]);
|
|
|
|
val_rxcfg |= DP83867_WOL_SEC_EN;
|
|
} else {
|
|
val_rxcfg &= ~DP83867_WOL_SEC_EN;
|
|
}
|
|
|
|
if (wol->wolopts & WAKE_UCAST)
|
|
val_rxcfg |= DP83867_WOL_UCAST_EN;
|
|
else
|
|
val_rxcfg &= ~DP83867_WOL_UCAST_EN;
|
|
|
|
if (wol->wolopts & WAKE_BCAST)
|
|
val_rxcfg |= DP83867_WOL_BCAST_EN;
|
|
else
|
|
val_rxcfg &= ~DP83867_WOL_BCAST_EN;
|
|
} else {
|
|
val_rxcfg &= ~DP83867_WOL_ENH_MAC;
|
|
val_micr &= ~MII_DP83867_MICR_WOL_INT_EN;
|
|
}
|
|
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RXFCFG, val_rxcfg);
|
|
phy_write(phydev, MII_DP83867_MICR, val_micr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dp83867_get_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
u16 value, sopass_val;
|
|
|
|
wol->supported = (WAKE_UCAST | WAKE_BCAST | WAKE_MAGIC |
|
|
WAKE_MAGICSECURE);
|
|
wol->wolopts = 0;
|
|
|
|
value = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RXFCFG);
|
|
|
|
if (value & DP83867_WOL_UCAST_EN)
|
|
wol->wolopts |= WAKE_UCAST;
|
|
|
|
if (value & DP83867_WOL_BCAST_EN)
|
|
wol->wolopts |= WAKE_BCAST;
|
|
|
|
if (value & DP83867_WOL_MAGIC_EN)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
|
|
if (value & DP83867_WOL_SEC_EN) {
|
|
sopass_val = phy_read_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_RXFSOP1);
|
|
wol->sopass[0] = (sopass_val & 0xff);
|
|
wol->sopass[1] = (sopass_val >> 8);
|
|
|
|
sopass_val = phy_read_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_RXFSOP2);
|
|
wol->sopass[2] = (sopass_val & 0xff);
|
|
wol->sopass[3] = (sopass_val >> 8);
|
|
|
|
sopass_val = phy_read_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_RXFSOP3);
|
|
wol->sopass[4] = (sopass_val & 0xff);
|
|
wol->sopass[5] = (sopass_val >> 8);
|
|
|
|
wol->wolopts |= WAKE_MAGICSECURE;
|
|
}
|
|
|
|
if (!(value & DP83867_WOL_ENH_MAC))
|
|
wol->wolopts = 0;
|
|
}
|
|
|
|
static int dp83867_config_intr(struct phy_device *phydev)
|
|
{
|
|
int micr_status, err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
err = dp83867_ack_interrupt(phydev);
|
|
if (err)
|
|
return err;
|
|
|
|
micr_status = phy_read(phydev, MII_DP83867_MICR);
|
|
if (micr_status < 0)
|
|
return micr_status;
|
|
|
|
micr_status |=
|
|
(MII_DP83867_MICR_AN_ERR_INT_EN |
|
|
MII_DP83867_MICR_SPEED_CHNG_INT_EN |
|
|
MII_DP83867_MICR_AUTONEG_COMP_INT_EN |
|
|
MII_DP83867_MICR_LINK_STS_CHNG_INT_EN |
|
|
MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN |
|
|
MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN);
|
|
|
|
err = phy_write(phydev, MII_DP83867_MICR, micr_status);
|
|
} else {
|
|
micr_status = 0x0;
|
|
err = phy_write(phydev, MII_DP83867_MICR, micr_status);
|
|
if (err)
|
|
return err;
|
|
|
|
err = dp83867_ack_interrupt(phydev);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static irqreturn_t dp83867_handle_interrupt(struct phy_device *phydev)
|
|
{
|
|
int irq_status, irq_enabled;
|
|
|
|
irq_status = phy_read(phydev, MII_DP83867_ISR);
|
|
if (irq_status < 0) {
|
|
phy_error(phydev);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
irq_enabled = phy_read(phydev, MII_DP83867_MICR);
|
|
if (irq_enabled < 0) {
|
|
phy_error(phydev);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (!(irq_status & irq_enabled))
|
|
return IRQ_NONE;
|
|
|
|
phy_trigger_machine(phydev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int dp83867_read_status(struct phy_device *phydev)
|
|
{
|
|
int status = phy_read(phydev, MII_DP83867_PHYSTS);
|
|
int ret;
|
|
|
|
ret = genphy_read_status(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if (status & DP83867_PHYSTS_DUPLEX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
if (status & DP83867_PHYSTS_1000)
|
|
phydev->speed = SPEED_1000;
|
|
else if (status & DP83867_PHYSTS_100)
|
|
phydev->speed = SPEED_100;
|
|
else
|
|
phydev->speed = SPEED_10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83867_get_downshift(struct phy_device *phydev, u8 *data)
|
|
{
|
|
int val, cnt, enable, count;
|
|
|
|
val = phy_read(phydev, DP83867_CFG2);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
enable = FIELD_GET(DP83867_DOWNSHIFT_EN, val);
|
|
cnt = FIELD_GET(DP83867_DOWNSHIFT_ATTEMPT_MASK, val);
|
|
|
|
switch (cnt) {
|
|
case DP83867_DOWNSHIFT_1_COUNT_VAL:
|
|
count = DP83867_DOWNSHIFT_1_COUNT;
|
|
break;
|
|
case DP83867_DOWNSHIFT_2_COUNT_VAL:
|
|
count = DP83867_DOWNSHIFT_2_COUNT;
|
|
break;
|
|
case DP83867_DOWNSHIFT_4_COUNT_VAL:
|
|
count = DP83867_DOWNSHIFT_4_COUNT;
|
|
break;
|
|
case DP83867_DOWNSHIFT_8_COUNT_VAL:
|
|
count = DP83867_DOWNSHIFT_8_COUNT;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*data = enable ? count : DOWNSHIFT_DEV_DISABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83867_set_downshift(struct phy_device *phydev, u8 cnt)
|
|
{
|
|
int val, count;
|
|
|
|
if (cnt > DP83867_DOWNSHIFT_8_COUNT)
|
|
return -E2BIG;
|
|
|
|
if (!cnt)
|
|
return phy_clear_bits(phydev, DP83867_CFG2,
|
|
DP83867_DOWNSHIFT_EN);
|
|
|
|
switch (cnt) {
|
|
case DP83867_DOWNSHIFT_1_COUNT:
|
|
count = DP83867_DOWNSHIFT_1_COUNT_VAL;
|
|
break;
|
|
case DP83867_DOWNSHIFT_2_COUNT:
|
|
count = DP83867_DOWNSHIFT_2_COUNT_VAL;
|
|
break;
|
|
case DP83867_DOWNSHIFT_4_COUNT:
|
|
count = DP83867_DOWNSHIFT_4_COUNT_VAL;
|
|
break;
|
|
case DP83867_DOWNSHIFT_8_COUNT:
|
|
count = DP83867_DOWNSHIFT_8_COUNT_VAL;
|
|
break;
|
|
default:
|
|
phydev_err(phydev,
|
|
"Downshift count must be 1, 2, 4 or 8\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
val = DP83867_DOWNSHIFT_EN;
|
|
val |= FIELD_PREP(DP83867_DOWNSHIFT_ATTEMPT_MASK, count);
|
|
|
|
return phy_modify(phydev, DP83867_CFG2,
|
|
DP83867_DOWNSHIFT_EN | DP83867_DOWNSHIFT_ATTEMPT_MASK,
|
|
val);
|
|
}
|
|
|
|
static int dp83867_get_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return dp83867_get_downshift(phydev, data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int dp83867_set_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, const void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return dp83867_set_downshift(phydev, *(const u8 *)data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int dp83867_config_port_mirroring(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867 =
|
|
(struct dp83867_private *)phydev->priv;
|
|
|
|
if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN)
|
|
phy_set_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
|
|
DP83867_CFG4_PORT_MIRROR_EN);
|
|
else
|
|
phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
|
|
DP83867_CFG4_PORT_MIRROR_EN);
|
|
return 0;
|
|
}
|
|
|
|
static int dp83867_verify_rgmii_cfg(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867 = phydev->priv;
|
|
|
|
/* Existing behavior was to use default pin strapping delay in rgmii
|
|
* mode, but rgmii should have meant no delay. Warn existing users.
|
|
*/
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
|
|
const u16 val = phy_read_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_STRAP_STS2);
|
|
const u16 txskew = (val & DP83867_STRAP_STS2_CLK_SKEW_TX_MASK) >>
|
|
DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT;
|
|
const u16 rxskew = (val & DP83867_STRAP_STS2_CLK_SKEW_RX_MASK) >>
|
|
DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT;
|
|
|
|
if (txskew != DP83867_STRAP_STS2_CLK_SKEW_NONE ||
|
|
rxskew != DP83867_STRAP_STS2_CLK_SKEW_NONE)
|
|
phydev_warn(phydev,
|
|
"PHY has delays via pin strapping, but phy-mode = 'rgmii'\n"
|
|
"Should be 'rgmii-id' to use internal delays txskew:%x rxskew:%x\n",
|
|
txskew, rxskew);
|
|
}
|
|
|
|
/* RX delay *must* be specified if internal delay of RX is used. */
|
|
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) &&
|
|
dp83867->rx_id_delay == DP83867_RGMII_RX_CLK_DELAY_INV) {
|
|
phydev_err(phydev, "ti,rx-internal-delay must be specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* TX delay *must* be specified if internal delay of TX is used. */
|
|
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) &&
|
|
dp83867->tx_id_delay == DP83867_RGMII_TX_CLK_DELAY_INV) {
|
|
phydev_err(phydev, "ti,tx-internal-delay must be specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF_MDIO)
|
|
static int dp83867_of_init(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867 = phydev->priv;
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct device_node *of_node = dev->of_node;
|
|
int ret;
|
|
|
|
if (!of_node)
|
|
return -ENODEV;
|
|
|
|
/* Optional configuration */
|
|
ret = of_property_read_u32(of_node, "ti,clk-output-sel",
|
|
&dp83867->clk_output_sel);
|
|
/* If not set, keep default */
|
|
if (!ret) {
|
|
dp83867->set_clk_output = true;
|
|
/* Valid values are 0 to DP83867_CLK_O_SEL_REF_CLK or
|
|
* DP83867_CLK_O_SEL_OFF.
|
|
*/
|
|
if (dp83867->clk_output_sel > DP83867_CLK_O_SEL_REF_CLK &&
|
|
dp83867->clk_output_sel != DP83867_CLK_O_SEL_OFF) {
|
|
phydev_err(phydev, "ti,clk-output-sel value %u out of range\n",
|
|
dp83867->clk_output_sel);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (of_property_read_bool(of_node, "ti,max-output-impedance"))
|
|
dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
|
|
else if (of_property_read_bool(of_node, "ti,min-output-impedance"))
|
|
dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN;
|
|
else
|
|
dp83867->io_impedance = -1; /* leave at default */
|
|
|
|
dp83867->rxctrl_strap_quirk = of_property_read_bool(of_node,
|
|
"ti,dp83867-rxctrl-strap-quirk");
|
|
|
|
dp83867->sgmii_ref_clk_en = of_property_read_bool(of_node,
|
|
"ti,sgmii-ref-clock-output-enable");
|
|
|
|
dp83867->rx_id_delay = DP83867_RGMII_RX_CLK_DELAY_INV;
|
|
ret = of_property_read_u32(of_node, "ti,rx-internal-delay",
|
|
&dp83867->rx_id_delay);
|
|
if (!ret && dp83867->rx_id_delay > DP83867_RGMII_RX_CLK_DELAY_MAX) {
|
|
phydev_err(phydev,
|
|
"ti,rx-internal-delay value of %u out of range\n",
|
|
dp83867->rx_id_delay);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dp83867->tx_id_delay = DP83867_RGMII_TX_CLK_DELAY_INV;
|
|
ret = of_property_read_u32(of_node, "ti,tx-internal-delay",
|
|
&dp83867->tx_id_delay);
|
|
if (!ret && dp83867->tx_id_delay > DP83867_RGMII_TX_CLK_DELAY_MAX) {
|
|
phydev_err(phydev,
|
|
"ti,tx-internal-delay value of %u out of range\n",
|
|
dp83867->tx_id_delay);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_bool(of_node, "enet-phy-lane-swap"))
|
|
dp83867->port_mirroring = DP83867_PORT_MIRROING_EN;
|
|
|
|
if (of_property_read_bool(of_node, "enet-phy-lane-no-swap"))
|
|
dp83867->port_mirroring = DP83867_PORT_MIRROING_DIS;
|
|
|
|
ret = of_property_read_u32(of_node, "ti,fifo-depth",
|
|
&dp83867->tx_fifo_depth);
|
|
if (ret) {
|
|
ret = of_property_read_u32(of_node, "tx-fifo-depth",
|
|
&dp83867->tx_fifo_depth);
|
|
if (ret)
|
|
dp83867->tx_fifo_depth =
|
|
DP83867_PHYCR_FIFO_DEPTH_4_B_NIB;
|
|
}
|
|
|
|
if (dp83867->tx_fifo_depth > DP83867_PHYCR_FIFO_DEPTH_MAX) {
|
|
phydev_err(phydev, "tx-fifo-depth value %u out of range\n",
|
|
dp83867->tx_fifo_depth);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_u32(of_node, "rx-fifo-depth",
|
|
&dp83867->rx_fifo_depth);
|
|
if (ret)
|
|
dp83867->rx_fifo_depth = DP83867_PHYCR_FIFO_DEPTH_4_B_NIB;
|
|
|
|
if (dp83867->rx_fifo_depth > DP83867_PHYCR_FIFO_DEPTH_MAX) {
|
|
phydev_err(phydev, "rx-fifo-depth value %u out of range\n",
|
|
dp83867->rx_fifo_depth);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int dp83867_of_init(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_OF_MDIO */
|
|
|
|
static int dp83867_probe(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867;
|
|
|
|
dp83867 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83867),
|
|
GFP_KERNEL);
|
|
if (!dp83867)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = dp83867;
|
|
|
|
return dp83867_of_init(phydev);
|
|
}
|
|
|
|
static int dp83867_config_init(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867 = phydev->priv;
|
|
int ret, val, bs;
|
|
u16 delay;
|
|
|
|
/* Force speed optimization for the PHY even if it strapped */
|
|
ret = phy_modify(phydev, DP83867_CFG2, DP83867_DOWNSHIFT_EN,
|
|
DP83867_DOWNSHIFT_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dp83867_verify_rgmii_cfg(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */
|
|
if (dp83867->rxctrl_strap_quirk)
|
|
phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
|
|
BIT(7));
|
|
|
|
bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS2);
|
|
if (bs & DP83867_STRAP_STS2_STRAP_FLD) {
|
|
/* When using strap to enable FLD, the ENERGY_LOST_FLD_THR will
|
|
* be set to 0x2. This may causes the PHY link to be unstable -
|
|
* the default value 0x1 need to be restored.
|
|
*/
|
|
ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_FLD_THR_CFG,
|
|
DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK,
|
|
0x1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (phy_interface_is_rgmii(phydev) ||
|
|
phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
val = phy_read(phydev, MII_DP83867_PHYCTRL);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
val &= ~DP83867_PHYCR_TX_FIFO_DEPTH_MASK;
|
|
val |= (dp83867->tx_fifo_depth <<
|
|
DP83867_PHYCR_TX_FIFO_DEPTH_SHIFT);
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
val &= ~DP83867_PHYCR_RX_FIFO_DEPTH_MASK;
|
|
val |= (dp83867->rx_fifo_depth <<
|
|
DP83867_PHYCR_RX_FIFO_DEPTH_SHIFT);
|
|
}
|
|
|
|
ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (phy_interface_is_rgmii(phydev)) {
|
|
val = phy_read(phydev, MII_DP83867_PHYCTRL);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
/* The code below checks if "port mirroring" N/A MODE4 has been
|
|
* enabled during power on bootstrap.
|
|
*
|
|
* Such N/A mode enabled by mistake can put PHY IC in some
|
|
* internal testing mode and disable RGMII transmission.
|
|
*
|
|
* In this particular case one needs to check STRAP_STS1
|
|
* register's bit 11 (marked as RESERVED).
|
|
*/
|
|
|
|
bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS1);
|
|
if (bs & DP83867_STRAP_STS1_RESERVED)
|
|
val &= ~DP83867_PHYCR_RESERVED_MASK;
|
|
|
|
ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* If rgmii mode with no internal delay is selected, we do NOT use
|
|
* aligned mode as one might expect. Instead we use the PHY's default
|
|
* based on pin strapping. And the "mode 0" default is to *use*
|
|
* internal delay with a value of 7 (2.00 ns).
|
|
*
|
|
* Set up RGMII delays
|
|
*/
|
|
val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
|
|
|
|
val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
|
|
val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
val |= DP83867_RGMII_TX_CLK_DELAY_EN;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
val |= DP83867_RGMII_RX_CLK_DELAY_EN;
|
|
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL, val);
|
|
|
|
delay = 0;
|
|
if (dp83867->rx_id_delay != DP83867_RGMII_RX_CLK_DELAY_INV)
|
|
delay |= dp83867->rx_id_delay;
|
|
if (dp83867->tx_id_delay != DP83867_RGMII_TX_CLK_DELAY_INV)
|
|
delay |= dp83867->tx_id_delay <<
|
|
DP83867_RGMII_TX_CLK_DELAY_SHIFT;
|
|
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL,
|
|
delay);
|
|
}
|
|
|
|
/* If specified, set io impedance */
|
|
if (dp83867->io_impedance >= 0)
|
|
phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
|
|
DP83867_IO_MUX_CFG_IO_IMPEDANCE_MASK,
|
|
dp83867->io_impedance);
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
/* For support SPEED_10 in SGMII mode
|
|
* DP83867_10M_SGMII_RATE_ADAPT bit
|
|
* has to be cleared by software. That
|
|
* does not affect SPEED_100 and
|
|
* SPEED_1000.
|
|
*/
|
|
ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_10M_SGMII_CFG,
|
|
DP83867_10M_SGMII_RATE_ADAPT_MASK,
|
|
0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5
|
|
* are 01). That is not enough to finalize autoneg on some
|
|
* devices. Increase this timer duration to maximum 16ms.
|
|
*/
|
|
ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_CFG4,
|
|
DP83867_CFG4_SGMII_ANEG_MASK,
|
|
DP83867_CFG4_SGMII_ANEG_TIMER_16MS);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL);
|
|
/* SGMII type is set to 4-wire mode by default.
|
|
* If we place appropriate property in dts (see above)
|
|
* switch on 6-wire mode.
|
|
*/
|
|
if (dp83867->sgmii_ref_clk_en)
|
|
val |= DP83867_SGMII_TYPE;
|
|
else
|
|
val &= ~DP83867_SGMII_TYPE;
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, val);
|
|
}
|
|
|
|
val = phy_read(phydev, DP83867_CFG3);
|
|
/* Enable Interrupt output INT_OE in CFG3 register */
|
|
if (phy_interrupt_is_valid(phydev))
|
|
val |= DP83867_CFG3_INT_OE;
|
|
|
|
val |= DP83867_CFG3_ROBUST_AUTO_MDIX;
|
|
phy_write(phydev, DP83867_CFG3, val);
|
|
|
|
if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
|
|
dp83867_config_port_mirroring(phydev);
|
|
|
|
/* Clock output selection if muxing property is set */
|
|
if (dp83867->set_clk_output) {
|
|
u16 mask = DP83867_IO_MUX_CFG_CLK_O_DISABLE;
|
|
|
|
if (dp83867->clk_output_sel == DP83867_CLK_O_SEL_OFF) {
|
|
val = DP83867_IO_MUX_CFG_CLK_O_DISABLE;
|
|
} else {
|
|
mask |= DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
|
|
val = dp83867->clk_output_sel <<
|
|
DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT;
|
|
}
|
|
|
|
phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
|
|
mask, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83867_phy_reset(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESTART);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
usleep_range(10, 20);
|
|
|
|
return phy_modify(phydev, MII_DP83867_PHYCTRL,
|
|
DP83867_PHYCR_FORCE_LINK_GOOD, 0);
|
|
}
|
|
|
|
static struct phy_driver dp83867_driver[] = {
|
|
{
|
|
.phy_id = DP83867_PHY_ID,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "TI DP83867",
|
|
/* PHY_GBIT_FEATURES */
|
|
|
|
.probe = dp83867_probe,
|
|
.config_init = dp83867_config_init,
|
|
.soft_reset = dp83867_phy_reset,
|
|
|
|
.read_status = dp83867_read_status,
|
|
.get_tunable = dp83867_get_tunable,
|
|
.set_tunable = dp83867_set_tunable,
|
|
|
|
.get_wol = dp83867_get_wol,
|
|
.set_wol = dp83867_set_wol,
|
|
|
|
/* IRQ related */
|
|
.config_intr = dp83867_config_intr,
|
|
.handle_interrupt = dp83867_handle_interrupt,
|
|
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
},
|
|
};
|
|
module_phy_driver(dp83867_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused dp83867_tbl[] = {
|
|
{ DP83867_PHY_ID, 0xfffffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, dp83867_tbl);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments DP83867 PHY driver");
|
|
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
|
|
MODULE_LICENSE("GPL v2");
|