mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 03:10:12 +00:00
![Hans de Goede](/assets/img/avatar_default.png)
Make cht_wc_extcon_get_id() report RID_A for ACA adapters, instead of reporting ID_FLOAT. According to the spec. we should read the USB-ID pin ADC value to determine the resistance of the used pull-down resister and then return RID_A / RID_B / RID_C based on this. But all "Accessory Charger Adapter"s (ACAs) which users can actually buy always use a combination of a charging port with one or more USB-A ports, so they should always use a resistor indicating RID_A. But the spec is hard to read / badly-worded so some of them actually indicate they are a RID_B ACA even though they clearly are a RID_A ACA. To workaround this simply always return INTEL_USB_RID_A, which matches all the ACAs which users can actually buy. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
646 lines
18 KiB
C
646 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Extcon charger detection driver for Intel Cherrytrail Whiskey Cove PMIC
|
|
* Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
|
|
* Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/extcon-provider.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/intel_soc_pmic.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb/role.h>
|
|
|
|
#include "extcon-intel.h"
|
|
|
|
#define CHT_WC_PHYCTRL 0x5e07
|
|
|
|
#define CHT_WC_CHGRCTRL0 0x5e16
|
|
#define CHT_WC_CHGRCTRL0_CHGRRESET BIT(0)
|
|
#define CHT_WC_CHGRCTRL0_EMRGCHREN BIT(1)
|
|
#define CHT_WC_CHGRCTRL0_EXTCHRDIS BIT(2)
|
|
#define CHT_WC_CHGRCTRL0_SWCONTROL BIT(3)
|
|
#define CHT_WC_CHGRCTRL0_TTLCK BIT(4)
|
|
#define CHT_WC_CHGRCTRL0_CCSM_OFF BIT(5)
|
|
#define CHT_WC_CHGRCTRL0_DBPOFF BIT(6)
|
|
#define CHT_WC_CHGRCTRL0_CHR_WDT_NOKICK BIT(7)
|
|
|
|
#define CHT_WC_CHGRCTRL1 0x5e17
|
|
#define CHT_WC_CHGRCTRL1_FUSB_INLMT_100 BIT(0)
|
|
#define CHT_WC_CHGRCTRL1_FUSB_INLMT_150 BIT(1)
|
|
#define CHT_WC_CHGRCTRL1_FUSB_INLMT_500 BIT(2)
|
|
#define CHT_WC_CHGRCTRL1_FUSB_INLMT_900 BIT(3)
|
|
#define CHT_WC_CHGRCTRL1_FUSB_INLMT_1500 BIT(4)
|
|
#define CHT_WC_CHGRCTRL1_FTEMP_EVENT BIT(5)
|
|
#define CHT_WC_CHGRCTRL1_OTGMODE BIT(6)
|
|
#define CHT_WC_CHGRCTRL1_DBPEN BIT(7)
|
|
|
|
#define CHT_WC_USBSRC 0x5e29
|
|
#define CHT_WC_USBSRC_STS_MASK GENMASK(1, 0)
|
|
#define CHT_WC_USBSRC_STS_SUCCESS 2
|
|
#define CHT_WC_USBSRC_STS_FAIL 3
|
|
#define CHT_WC_USBSRC_TYPE_SHIFT 2
|
|
#define CHT_WC_USBSRC_TYPE_MASK GENMASK(5, 2)
|
|
#define CHT_WC_USBSRC_TYPE_NONE 0
|
|
#define CHT_WC_USBSRC_TYPE_SDP 1
|
|
#define CHT_WC_USBSRC_TYPE_DCP 2
|
|
#define CHT_WC_USBSRC_TYPE_CDP 3
|
|
#define CHT_WC_USBSRC_TYPE_ACA 4
|
|
#define CHT_WC_USBSRC_TYPE_SE1 5
|
|
#define CHT_WC_USBSRC_TYPE_MHL 6
|
|
#define CHT_WC_USBSRC_TYPE_FLOATING 7
|
|
#define CHT_WC_USBSRC_TYPE_OTHER 8
|
|
#define CHT_WC_USBSRC_TYPE_DCP_EXTPHY 9
|
|
|
|
#define CHT_WC_CHGDISCTRL 0x5e2f
|
|
#define CHT_WC_CHGDISCTRL_OUT BIT(0)
|
|
/* 0 - open drain, 1 - regular push-pull output */
|
|
#define CHT_WC_CHGDISCTRL_DRV BIT(4)
|
|
/* 0 - pin is controlled by SW, 1 - by HW */
|
|
#define CHT_WC_CHGDISCTRL_FN BIT(6)
|
|
|
|
#define CHT_WC_PWRSRC_IRQ 0x6e03
|
|
#define CHT_WC_PWRSRC_IRQ_MASK 0x6e0f
|
|
#define CHT_WC_PWRSRC_STS 0x6e1e
|
|
#define CHT_WC_PWRSRC_VBUS BIT(0)
|
|
#define CHT_WC_PWRSRC_DC BIT(1)
|
|
#define CHT_WC_PWRSRC_BATT BIT(2)
|
|
#define CHT_WC_PWRSRC_USBID_MASK GENMASK(4, 3)
|
|
#define CHT_WC_PWRSRC_USBID_SHIFT 3
|
|
#define CHT_WC_PWRSRC_RID_ACA 0
|
|
#define CHT_WC_PWRSRC_RID_GND 1
|
|
#define CHT_WC_PWRSRC_RID_FLOAT 2
|
|
|
|
#define CHT_WC_VBUS_GPIO_CTLO 0x6e2d
|
|
#define CHT_WC_VBUS_GPIO_CTLO_OUTPUT BIT(0)
|
|
#define CHT_WC_VBUS_GPIO_CTLO_DRV_OD BIT(4)
|
|
#define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT BIT(5)
|
|
|
|
enum cht_wc_mux_select {
|
|
MUX_SEL_PMIC = 0,
|
|
MUX_SEL_SOC,
|
|
};
|
|
|
|
static const unsigned int cht_wc_extcon_cables[] = {
|
|
EXTCON_USB,
|
|
EXTCON_USB_HOST,
|
|
EXTCON_CHG_USB_SDP,
|
|
EXTCON_CHG_USB_CDP,
|
|
EXTCON_CHG_USB_DCP,
|
|
EXTCON_CHG_USB_ACA,
|
|
EXTCON_NONE,
|
|
};
|
|
|
|
struct cht_wc_extcon_data {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct extcon_dev *edev;
|
|
struct usb_role_switch *role_sw;
|
|
struct regulator *vbus_boost;
|
|
struct power_supply *psy;
|
|
enum power_supply_usb_type usb_type;
|
|
unsigned int previous_cable;
|
|
bool usb_host;
|
|
bool vbus_boost_enabled;
|
|
};
|
|
|
|
static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
|
|
{
|
|
switch ((pwrsrc_sts & CHT_WC_PWRSRC_USBID_MASK) >> CHT_WC_PWRSRC_USBID_SHIFT) {
|
|
case CHT_WC_PWRSRC_RID_GND:
|
|
return INTEL_USB_ID_GND;
|
|
case CHT_WC_PWRSRC_RID_FLOAT:
|
|
return INTEL_USB_ID_FLOAT;
|
|
/*
|
|
* According to the spec. we should read the USB-ID pin ADC value here
|
|
* to determine the resistance of the used pull-down resister and then
|
|
* return RID_A / RID_B / RID_C based on this. But all "Accessory
|
|
* Charger Adapter"s (ACAs) which users can actually buy always use
|
|
* a combination of a charging port with one or more USB-A ports, so
|
|
* they should always use a resistor indicating RID_A. But the spec
|
|
* is hard to read / badly-worded so some of them actually indicate
|
|
* they are a RID_B ACA evnen though they clearly are a RID_A ACA.
|
|
* To workaround this simply always return INTEL_USB_RID_A, which
|
|
* matches all the ACAs which users can actually buy.
|
|
*/
|
|
case CHT_WC_PWRSRC_RID_ACA:
|
|
return INTEL_USB_RID_A;
|
|
default:
|
|
return INTEL_USB_ID_FLOAT;
|
|
}
|
|
}
|
|
|
|
static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
|
|
bool ignore_errors)
|
|
{
|
|
int ret, usbsrc, status;
|
|
unsigned long timeout;
|
|
|
|
/* Charger detection can take upto 600ms, wait 800ms max. */
|
|
timeout = jiffies + msecs_to_jiffies(800);
|
|
do {
|
|
ret = regmap_read(ext->regmap, CHT_WC_USBSRC, &usbsrc);
|
|
if (ret) {
|
|
dev_err(ext->dev, "Error reading usbsrc: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
status = usbsrc & CHT_WC_USBSRC_STS_MASK;
|
|
if (status == CHT_WC_USBSRC_STS_SUCCESS ||
|
|
status == CHT_WC_USBSRC_STS_FAIL)
|
|
break;
|
|
|
|
msleep(50); /* Wait a bit before retrying */
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
if (status != CHT_WC_USBSRC_STS_SUCCESS) {
|
|
if (!ignore_errors) {
|
|
if (status == CHT_WC_USBSRC_STS_FAIL)
|
|
dev_warn(ext->dev, "Could not detect charger type\n");
|
|
else
|
|
dev_warn(ext->dev, "Timeout detecting charger type\n");
|
|
}
|
|
|
|
/* Safe fallback */
|
|
usbsrc = CHT_WC_USBSRC_TYPE_SDP << CHT_WC_USBSRC_TYPE_SHIFT;
|
|
}
|
|
|
|
usbsrc = (usbsrc & CHT_WC_USBSRC_TYPE_MASK) >> CHT_WC_USBSRC_TYPE_SHIFT;
|
|
switch (usbsrc) {
|
|
default:
|
|
dev_warn(ext->dev,
|
|
"Unhandled charger type %d, defaulting to SDP\n",
|
|
ret);
|
|
ext->usb_type = POWER_SUPPLY_USB_TYPE_SDP;
|
|
return EXTCON_CHG_USB_SDP;
|
|
case CHT_WC_USBSRC_TYPE_SDP:
|
|
case CHT_WC_USBSRC_TYPE_FLOATING:
|
|
case CHT_WC_USBSRC_TYPE_OTHER:
|
|
ext->usb_type = POWER_SUPPLY_USB_TYPE_SDP;
|
|
return EXTCON_CHG_USB_SDP;
|
|
case CHT_WC_USBSRC_TYPE_CDP:
|
|
ext->usb_type = POWER_SUPPLY_USB_TYPE_CDP;
|
|
return EXTCON_CHG_USB_CDP;
|
|
case CHT_WC_USBSRC_TYPE_DCP:
|
|
case CHT_WC_USBSRC_TYPE_DCP_EXTPHY:
|
|
case CHT_WC_USBSRC_TYPE_MHL: /* MHL2+ delivers upto 2A, treat as DCP */
|
|
ext->usb_type = POWER_SUPPLY_USB_TYPE_DCP;
|
|
return EXTCON_CHG_USB_DCP;
|
|
case CHT_WC_USBSRC_TYPE_ACA:
|
|
ext->usb_type = POWER_SUPPLY_USB_TYPE_ACA;
|
|
return EXTCON_CHG_USB_ACA;
|
|
}
|
|
}
|
|
|
|
static void cht_wc_extcon_set_phymux(struct cht_wc_extcon_data *ext, u8 state)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(ext->regmap, CHT_WC_PHYCTRL, state);
|
|
if (ret)
|
|
dev_err(ext->dev, "Error writing phyctrl: %d\n", ret);
|
|
}
|
|
|
|
static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
|
|
bool enable)
|
|
{
|
|
int ret, val;
|
|
|
|
/*
|
|
* The 5V boost converter is enabled through a gpio on the PMIC, since
|
|
* there currently is no gpio driver we access the gpio reg directly.
|
|
*/
|
|
val = CHT_WC_VBUS_GPIO_CTLO_DRV_OD | CHT_WC_VBUS_GPIO_CTLO_DIR_OUT;
|
|
if (enable)
|
|
val |= CHT_WC_VBUS_GPIO_CTLO_OUTPUT;
|
|
|
|
ret = regmap_write(ext->regmap, CHT_WC_VBUS_GPIO_CTLO, val);
|
|
if (ret)
|
|
dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);
|
|
}
|
|
|
|
static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext,
|
|
bool enable)
|
|
{
|
|
unsigned int val = enable ? CHT_WC_CHGRCTRL1_OTGMODE : 0;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL1,
|
|
CHT_WC_CHGRCTRL1_OTGMODE, val);
|
|
if (ret)
|
|
dev_err(ext->dev, "Error updating CHGRCTRL1 reg: %d\n", ret);
|
|
|
|
if (ext->vbus_boost && ext->vbus_boost_enabled != enable) {
|
|
if (enable)
|
|
ret = regulator_enable(ext->vbus_boost);
|
|
else
|
|
ret = regulator_disable(ext->vbus_boost);
|
|
|
|
if (ret)
|
|
dev_err(ext->dev, "Error updating Vbus boost regulator: %d\n", ret);
|
|
else
|
|
ext->vbus_boost_enabled = enable;
|
|
}
|
|
}
|
|
|
|
static void cht_wc_extcon_enable_charging(struct cht_wc_extcon_data *ext,
|
|
bool enable)
|
|
{
|
|
unsigned int val = enable ? 0 : CHT_WC_CHGDISCTRL_OUT;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(ext->regmap, CHT_WC_CHGDISCTRL,
|
|
CHT_WC_CHGDISCTRL_OUT, val);
|
|
if (ret)
|
|
dev_err(ext->dev, "Error updating CHGDISCTRL reg: %d\n", ret);
|
|
}
|
|
|
|
/* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */
|
|
static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext,
|
|
unsigned int cable, bool state)
|
|
{
|
|
extcon_set_state_sync(ext->edev, cable, state);
|
|
if (cable == EXTCON_CHG_USB_SDP)
|
|
extcon_set_state_sync(ext->edev, EXTCON_USB, state);
|
|
}
|
|
|
|
static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
|
|
{
|
|
int ret, pwrsrc_sts, id;
|
|
unsigned int cable = EXTCON_NONE;
|
|
/* Ignore errors in host mode, as the 5v boost converter is on then */
|
|
bool ignore_get_charger_errors = ext->usb_host;
|
|
enum usb_role role;
|
|
|
|
ext->usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
|
|
|
|
ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
|
|
if (ret) {
|
|
dev_err(ext->dev, "Error reading pwrsrc status: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
|
|
if (id == INTEL_USB_ID_GND) {
|
|
cht_wc_extcon_enable_charging(ext, false);
|
|
cht_wc_extcon_set_otgmode(ext, true);
|
|
|
|
/* The 5v boost causes a false VBUS / SDP detect, skip */
|
|
goto charger_det_done;
|
|
}
|
|
|
|
cht_wc_extcon_set_otgmode(ext, false);
|
|
cht_wc_extcon_enable_charging(ext, true);
|
|
|
|
/* Plugged into a host/charger or not connected? */
|
|
if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) {
|
|
/* Route D+ and D- to PMIC for future charger detection */
|
|
cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC);
|
|
goto set_state;
|
|
}
|
|
|
|
ret = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors);
|
|
if (ret >= 0)
|
|
cable = ret;
|
|
|
|
charger_det_done:
|
|
/* Route D+ and D- to SoC for the host or gadget controller */
|
|
cht_wc_extcon_set_phymux(ext, MUX_SEL_SOC);
|
|
|
|
set_state:
|
|
if (cable != ext->previous_cable) {
|
|
cht_wc_extcon_set_state(ext, cable, true);
|
|
cht_wc_extcon_set_state(ext, ext->previous_cable, false);
|
|
ext->previous_cable = cable;
|
|
}
|
|
|
|
ext->usb_host = ((id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A));
|
|
extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
|
|
|
|
if (ext->usb_host)
|
|
role = USB_ROLE_HOST;
|
|
else if (pwrsrc_sts & CHT_WC_PWRSRC_VBUS)
|
|
role = USB_ROLE_DEVICE;
|
|
else
|
|
role = USB_ROLE_NONE;
|
|
|
|
/* Note: this is a no-op when ext->role_sw is NULL */
|
|
ret = usb_role_switch_set_role(ext->role_sw, role);
|
|
if (ret)
|
|
dev_err(ext->dev, "Error setting USB-role: %d\n", ret);
|
|
|
|
if (ext->psy)
|
|
power_supply_changed(ext->psy);
|
|
}
|
|
|
|
static irqreturn_t cht_wc_extcon_isr(int irq, void *data)
|
|
{
|
|
struct cht_wc_extcon_data *ext = data;
|
|
int ret, irqs;
|
|
|
|
ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_IRQ, &irqs);
|
|
if (ret) {
|
|
dev_err(ext->dev, "Error reading irqs: %d\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
cht_wc_extcon_pwrsrc_event(ext);
|
|
|
|
ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ, irqs);
|
|
if (ret) {
|
|
dev_err(ext->dev, "Error writing irqs: %d\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable)
|
|
{
|
|
int ret, mask, val;
|
|
|
|
val = enable ? 0 : CHT_WC_CHGDISCTRL_FN;
|
|
ret = regmap_update_bits(ext->regmap, CHT_WC_CHGDISCTRL,
|
|
CHT_WC_CHGDISCTRL_FN, val);
|
|
if (ret)
|
|
dev_err(ext->dev,
|
|
"Error setting sw control for CHGDIS pin: %d\n",
|
|
ret);
|
|
|
|
mask = CHT_WC_CHGRCTRL0_SWCONTROL | CHT_WC_CHGRCTRL0_CCSM_OFF;
|
|
val = enable ? mask : 0;
|
|
ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL0, mask, val);
|
|
if (ret)
|
|
dev_err(ext->dev, "Error setting sw control: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cht_wc_extcon_find_role_sw(struct cht_wc_extcon_data *ext)
|
|
{
|
|
const struct software_node *swnode;
|
|
struct fwnode_handle *fwnode;
|
|
|
|
swnode = software_node_find_by_name(NULL, "intel-xhci-usb-sw");
|
|
if (!swnode)
|
|
return -EPROBE_DEFER;
|
|
|
|
fwnode = software_node_fwnode(swnode);
|
|
ext->role_sw = usb_role_switch_find_by_fwnode(fwnode);
|
|
fwnode_handle_put(fwnode);
|
|
|
|
return ext->role_sw ? 0 : -EPROBE_DEFER;
|
|
}
|
|
|
|
static void cht_wc_extcon_put_role_sw(void *data)
|
|
{
|
|
struct cht_wc_extcon_data *ext = data;
|
|
|
|
usb_role_switch_put(ext->role_sw);
|
|
}
|
|
|
|
/* Some boards require controlling the role-sw and Vbus based on the id-pin */
|
|
static int cht_wc_extcon_get_role_sw_and_regulator(struct cht_wc_extcon_data *ext)
|
|
{
|
|
int ret;
|
|
|
|
ret = cht_wc_extcon_find_role_sw(ext);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(ext->dev, cht_wc_extcon_put_role_sw, ext);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* On x86/ACPI platforms the regulator <-> consumer link is provided
|
|
* by platform_data passed to the regulator driver. This means that
|
|
* this info is not available before the regulator driver has bound.
|
|
* Use devm_regulator_get_optional() to avoid getting a dummy
|
|
* regulator and wait for the regulator to show up if necessary.
|
|
*/
|
|
ext->vbus_boost = devm_regulator_get_optional(ext->dev, "vbus");
|
|
if (IS_ERR(ext->vbus_boost)) {
|
|
ret = PTR_ERR(ext->vbus_boost);
|
|
if (ret == -ENODEV)
|
|
ret = -EPROBE_DEFER;
|
|
|
|
return dev_err_probe(ext->dev, ret, "getting Vbus regulator");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cht_wc_extcon_psy_get_prop(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct cht_wc_extcon_data *ext = power_supply_get_drvdata(psy);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_USB_TYPE:
|
|
val->intval = ext->usb_type;
|
|
break;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = ext->usb_type ? 1 : 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const enum power_supply_usb_type cht_wc_extcon_psy_usb_types[] = {
|
|
POWER_SUPPLY_USB_TYPE_SDP,
|
|
POWER_SUPPLY_USB_TYPE_CDP,
|
|
POWER_SUPPLY_USB_TYPE_DCP,
|
|
POWER_SUPPLY_USB_TYPE_ACA,
|
|
POWER_SUPPLY_USB_TYPE_UNKNOWN,
|
|
};
|
|
|
|
static const enum power_supply_property cht_wc_extcon_psy_props[] = {
|
|
POWER_SUPPLY_PROP_USB_TYPE,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
};
|
|
|
|
static const struct power_supply_desc cht_wc_extcon_psy_desc = {
|
|
.name = "cht_wcove_pwrsrc",
|
|
.type = POWER_SUPPLY_TYPE_USB,
|
|
.usb_types = cht_wc_extcon_psy_usb_types,
|
|
.num_usb_types = ARRAY_SIZE(cht_wc_extcon_psy_usb_types),
|
|
.properties = cht_wc_extcon_psy_props,
|
|
.num_properties = ARRAY_SIZE(cht_wc_extcon_psy_props),
|
|
.get_property = cht_wc_extcon_psy_get_prop,
|
|
};
|
|
|
|
static int cht_wc_extcon_register_psy(struct cht_wc_extcon_data *ext)
|
|
{
|
|
struct power_supply_config psy_cfg = { .drv_data = ext };
|
|
|
|
ext->psy = devm_power_supply_register(ext->dev,
|
|
&cht_wc_extcon_psy_desc,
|
|
&psy_cfg);
|
|
return PTR_ERR_OR_ZERO(ext->psy);
|
|
}
|
|
|
|
static int cht_wc_extcon_probe(struct platform_device *pdev)
|
|
{
|
|
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
|
|
struct cht_wc_extcon_data *ext;
|
|
unsigned long mask = ~(CHT_WC_PWRSRC_VBUS | CHT_WC_PWRSRC_USBID_MASK);
|
|
int pwrsrc_sts, id;
|
|
int irq, ret;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ext = devm_kzalloc(&pdev->dev, sizeof(*ext), GFP_KERNEL);
|
|
if (!ext)
|
|
return -ENOMEM;
|
|
|
|
ext->dev = &pdev->dev;
|
|
ext->regmap = pmic->regmap;
|
|
ext->previous_cable = EXTCON_NONE;
|
|
|
|
/* Initialize extcon device */
|
|
ext->edev = devm_extcon_dev_allocate(ext->dev, cht_wc_extcon_cables);
|
|
if (IS_ERR(ext->edev))
|
|
return PTR_ERR(ext->edev);
|
|
|
|
switch (pmic->cht_wc_model) {
|
|
case INTEL_CHT_WC_GPD_WIN_POCKET:
|
|
/*
|
|
* When a host-cable is detected the BIOS enables an external 5v boost
|
|
* converter to power connected devices there are 2 problems with this:
|
|
* 1) This gets seen by the external battery charger as a valid Vbus
|
|
* supply and it then tries to feed Vsys from this creating a
|
|
* feedback loop which causes aprox. 300 mA extra battery drain
|
|
* (and unless we drive the external-charger-disable pin high it
|
|
* also tries to charge the battery causing even more feedback).
|
|
* 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply
|
|
* Since the external battery charger has its own 5v boost converter
|
|
* which does not have these issues, we simply turn the separate
|
|
* external 5v boost converter off and leave it off entirely.
|
|
*/
|
|
cht_wc_extcon_set_5v_boost(ext, false);
|
|
break;
|
|
case INTEL_CHT_WC_LENOVO_YOGABOOK1:
|
|
/* Do this first, as it may very well return -EPROBE_DEFER. */
|
|
ret = cht_wc_extcon_get_role_sw_and_regulator(ext);
|
|
if (ret)
|
|
return ret;
|
|
/*
|
|
* The bq25890 used here relies on this driver's BC-1.2 charger
|
|
* detection, and the bq25890 driver expect this info to be
|
|
* available through a parent power_supply class device which
|
|
* models the detected charger (idem to how the Type-C TCPM code
|
|
* registers a power_supply classdev for the connected charger).
|
|
*/
|
|
ret = cht_wc_extcon_register_psy(ext);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case INTEL_CHT_WC_XIAOMI_MIPAD2:
|
|
ret = cht_wc_extcon_get_role_sw_and_regulator(ext);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Enable sw control */
|
|
ret = cht_wc_extcon_sw_control(ext, true);
|
|
if (ret)
|
|
goto disable_sw_control;
|
|
|
|
/* Disable charging by external battery charger */
|
|
cht_wc_extcon_enable_charging(ext, false);
|
|
|
|
/* Register extcon device */
|
|
ret = devm_extcon_dev_register(ext->dev, ext->edev);
|
|
if (ret) {
|
|
dev_err(ext->dev, "Error registering extcon device: %d\n", ret);
|
|
goto disable_sw_control;
|
|
}
|
|
|
|
ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
|
|
if (ret) {
|
|
dev_err(ext->dev, "Error reading pwrsrc status: %d\n", ret);
|
|
goto disable_sw_control;
|
|
}
|
|
|
|
/*
|
|
* If no USB host or device connected, route D+ and D- to PMIC for
|
|
* initial charger detection
|
|
*/
|
|
id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
|
|
if (id != INTEL_USB_ID_GND)
|
|
cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC);
|
|
|
|
/* Get initial state */
|
|
cht_wc_extcon_pwrsrc_event(ext);
|
|
|
|
ret = devm_request_threaded_irq(ext->dev, irq, NULL, cht_wc_extcon_isr,
|
|
IRQF_ONESHOT, pdev->name, ext);
|
|
if (ret) {
|
|
dev_err(ext->dev, "Error requesting interrupt: %d\n", ret);
|
|
goto disable_sw_control;
|
|
}
|
|
|
|
/* Unmask irqs */
|
|
ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ_MASK, mask);
|
|
if (ret) {
|
|
dev_err(ext->dev, "Error writing irq-mask: %d\n", ret);
|
|
goto disable_sw_control;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ext);
|
|
|
|
return 0;
|
|
|
|
disable_sw_control:
|
|
cht_wc_extcon_sw_control(ext, false);
|
|
return ret;
|
|
}
|
|
|
|
static int cht_wc_extcon_remove(struct platform_device *pdev)
|
|
{
|
|
struct cht_wc_extcon_data *ext = platform_get_drvdata(pdev);
|
|
|
|
cht_wc_extcon_sw_control(ext, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id cht_wc_extcon_table[] = {
|
|
{ .name = "cht_wcove_pwrsrc" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, cht_wc_extcon_table);
|
|
|
|
static struct platform_driver cht_wc_extcon_driver = {
|
|
.probe = cht_wc_extcon_probe,
|
|
.remove = cht_wc_extcon_remove,
|
|
.id_table = cht_wc_extcon_table,
|
|
.driver = {
|
|
.name = "cht_wcove_pwrsrc",
|
|
},
|
|
};
|
|
module_platform_driver(cht_wc_extcon_driver);
|
|
|
|
MODULE_DESCRIPTION("Intel Cherrytrail Whiskey Cove PMIC extcon driver");
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_LICENSE("GPL v2");
|