linux-stable/drivers/usb/musb/musb_debugfs.c
Greg Kroah-Hartman 8a1ef171ff USB: musb: clean up debugfs file and directory creation
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Because of this, lots of init functions do not need to have return
values, so this cleans up a lot of unused error handling code that never
could have triggered in the past.

Cc: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31 12:54:21 +02:00

341 lines
8.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* MUSB OTG driver debugfs support
*
* Copyright 2010 Nokia Corporation
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include "musb_core.h"
#include "musb_debug.h"
struct musb_register_map {
char *name;
unsigned offset;
unsigned size;
};
static const struct musb_register_map musb_regmap[] = {
{ "FAddr", MUSB_FADDR, 8 },
{ "Power", MUSB_POWER, 8 },
{ "Frame", MUSB_FRAME, 16 },
{ "Index", MUSB_INDEX, 8 },
{ "Testmode", MUSB_TESTMODE, 8 },
{ "TxMaxPp", MUSB_TXMAXP, 16 },
{ "TxCSRp", MUSB_TXCSR, 16 },
{ "RxMaxPp", MUSB_RXMAXP, 16 },
{ "RxCSR", MUSB_RXCSR, 16 },
{ "RxCount", MUSB_RXCOUNT, 16 },
{ "IntrRxE", MUSB_INTRRXE, 16 },
{ "IntrTxE", MUSB_INTRTXE, 16 },
{ "IntrUsbE", MUSB_INTRUSBE, 8 },
{ "DevCtl", MUSB_DEVCTL, 8 },
{ "VControl", 0x68, 32 },
{ "HWVers", 0x69, 16 },
{ "LinkInfo", MUSB_LINKINFO, 8 },
{ "VPLen", MUSB_VPLEN, 8 },
{ "HS_EOF1", MUSB_HS_EOF1, 8 },
{ "FS_EOF1", MUSB_FS_EOF1, 8 },
{ "LS_EOF1", MUSB_LS_EOF1, 8 },
{ "SOFT_RST", 0x7F, 8 },
{ "DMA_CNTLch0", 0x204, 16 },
{ "DMA_ADDRch0", 0x208, 32 },
{ "DMA_COUNTch0", 0x20C, 32 },
{ "DMA_CNTLch1", 0x214, 16 },
{ "DMA_ADDRch1", 0x218, 32 },
{ "DMA_COUNTch1", 0x21C, 32 },
{ "DMA_CNTLch2", 0x224, 16 },
{ "DMA_ADDRch2", 0x228, 32 },
{ "DMA_COUNTch2", 0x22C, 32 },
{ "DMA_CNTLch3", 0x234, 16 },
{ "DMA_ADDRch3", 0x238, 32 },
{ "DMA_COUNTch3", 0x23C, 32 },
{ "DMA_CNTLch4", 0x244, 16 },
{ "DMA_ADDRch4", 0x248, 32 },
{ "DMA_COUNTch4", 0x24C, 32 },
{ "DMA_CNTLch5", 0x254, 16 },
{ "DMA_ADDRch5", 0x258, 32 },
{ "DMA_COUNTch5", 0x25C, 32 },
{ "DMA_CNTLch6", 0x264, 16 },
{ "DMA_ADDRch6", 0x268, 32 },
{ "DMA_COUNTch6", 0x26C, 32 },
{ "DMA_CNTLch7", 0x274, 16 },
{ "DMA_ADDRch7", 0x278, 32 },
{ "DMA_COUNTch7", 0x27C, 32 },
{ "ConfigData", MUSB_CONFIGDATA,8 },
{ "BabbleCtl", MUSB_BABBLE_CTL,8 },
{ "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
{ "RxFIFOsz", MUSB_RXFIFOSZ, 8 },
{ "TxFIFOadd", MUSB_TXFIFOADD, 16 },
{ "RxFIFOadd", MUSB_RXFIFOADD, 16 },
{ "EPInfo", MUSB_EPINFO, 8 },
{ "RAMInfo", MUSB_RAMINFO, 8 },
{ } /* Terminating Entry */
};
static int musb_regdump_show(struct seq_file *s, void *unused)
{
struct musb *musb = s->private;
unsigned i;
seq_printf(s, "MUSB (M)HDRC Register Dump\n");
pm_runtime_get_sync(musb->controller);
for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) {
switch (musb_regmap[i].size) {
case 8:
seq_printf(s, "%-12s: %02x\n", musb_regmap[i].name,
musb_readb(musb->mregs, musb_regmap[i].offset));
break;
case 16:
seq_printf(s, "%-12s: %04x\n", musb_regmap[i].name,
musb_readw(musb->mregs, musb_regmap[i].offset));
break;
case 32:
seq_printf(s, "%-12s: %08x\n", musb_regmap[i].name,
musb_readl(musb->mregs, musb_regmap[i].offset));
break;
}
}
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(musb_regdump);
static int musb_test_mode_show(struct seq_file *s, void *unused)
{
struct musb *musb = s->private;
unsigned test;
pm_runtime_get_sync(musb->controller);
test = musb_readb(musb->mregs, MUSB_TESTMODE);
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS))
seq_printf(s, "force host full-speed\n");
else if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS))
seq_printf(s, "force host high-speed\n");
else if (test == MUSB_TEST_FORCE_HOST)
seq_printf(s, "force host\n");
else if (test == MUSB_TEST_FIFO_ACCESS)
seq_printf(s, "fifo access\n");
else if (test == MUSB_TEST_FORCE_FS)
seq_printf(s, "force full-speed\n");
else if (test == MUSB_TEST_FORCE_HS)
seq_printf(s, "force high-speed\n");
else if (test == MUSB_TEST_PACKET)
seq_printf(s, "test packet\n");
else if (test == MUSB_TEST_K)
seq_printf(s, "test K\n");
else if (test == MUSB_TEST_J)
seq_printf(s, "test J\n");
else if (test == MUSB_TEST_SE0_NAK)
seq_printf(s, "test SE0 NAK\n");
return 0;
}
static int musb_test_mode_open(struct inode *inode, struct file *file)
{
return single_open(file, musb_test_mode_show, inode->i_private);
}
static ssize_t musb_test_mode_write(struct file *file,
const char __user *ubuf, size_t count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
struct musb *musb = s->private;
u8 test;
char buf[24];
pm_runtime_get_sync(musb->controller);
test = musb_readb(musb->mregs, MUSB_TESTMODE);
if (test) {
dev_err(musb->controller, "Error: test mode is already set. "
"Please do USB Bus Reset to start a new test.\n");
goto ret;
}
memset(buf, 0x00, sizeof(buf));
if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
if (strstarts(buf, "force host full-speed"))
test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS;
else if (strstarts(buf, "force host high-speed"))
test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS;
else if (strstarts(buf, "force host"))
test = MUSB_TEST_FORCE_HOST;
else if (strstarts(buf, "fifo access"))
test = MUSB_TEST_FIFO_ACCESS;
else if (strstarts(buf, "force full-speed"))
test = MUSB_TEST_FORCE_FS;
else if (strstarts(buf, "force high-speed"))
test = MUSB_TEST_FORCE_HS;
else if (strstarts(buf, "test packet")) {
test = MUSB_TEST_PACKET;
musb_load_testpacket(musb);
}
else if (strstarts(buf, "test K"))
test = MUSB_TEST_K;
else if (strstarts(buf, "test J"))
test = MUSB_TEST_J;
else if (strstarts(buf, "test SE0 NAK"))
test = MUSB_TEST_SE0_NAK;
musb_writeb(musb->mregs, MUSB_TESTMODE, test);
ret:
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
return count;
}
static const struct file_operations musb_test_mode_fops = {
.open = musb_test_mode_open,
.write = musb_test_mode_write,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int musb_softconnect_show(struct seq_file *s, void *unused)
{
struct musb *musb = s->private;
u8 reg;
int connect;
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
case OTG_STATE_A_WAIT_BCON:
pm_runtime_get_sync(musb->controller);
reg = musb_readb(musb->mregs, MUSB_DEVCTL);
connect = reg & MUSB_DEVCTL_SESSION ? 1 : 0;
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
break;
default:
connect = -1;
}
seq_printf(s, "%d\n", connect);
return 0;
}
static int musb_softconnect_open(struct inode *inode, struct file *file)
{
return single_open(file, musb_softconnect_show, inode->i_private);
}
static ssize_t musb_softconnect_write(struct file *file,
const char __user *ubuf, size_t count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
struct musb *musb = s->private;
char buf[2];
u8 reg;
memset(buf, 0x00, sizeof(buf));
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
pm_runtime_get_sync(musb->controller);
if (!strncmp(buf, "0", 1)) {
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
musb_root_disconnect(musb);
reg = musb_readb(musb->mregs, MUSB_DEVCTL);
reg &= ~MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, reg);
break;
default:
break;
}
} else if (!strncmp(buf, "1", 1)) {
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_BCON:
/*
* musb_save_context() called in musb_runtime_suspend()
* might cache devctl with SESSION bit cleared during
* soft-disconnect, so specifically set SESSION bit
* here to preserve it for musb_runtime_resume().
*/
musb->context.devctl |= MUSB_DEVCTL_SESSION;
reg = musb_readb(musb->mregs, MUSB_DEVCTL);
reg |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, reg);
break;
default:
break;
}
}
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
return count;
}
/*
* In host mode, connect/disconnect the bus without physically
* remove the devices.
*/
static const struct file_operations musb_softconnect_fops = {
.open = musb_softconnect_open,
.write = musb_softconnect_write,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
void musb_init_debugfs(struct musb *musb)
{
struct dentry *root;
root = debugfs_create_dir(dev_name(musb->controller), NULL);
musb->debugfs_root = root;
debugfs_create_file("regdump", S_IRUGO, root, musb, &musb_regdump_fops);
debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, musb,
&musb_test_mode_fops);
debugfs_create_file("softconnect", S_IRUGO | S_IWUSR, root, musb,
&musb_softconnect_fops);
}
void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb)
{
debugfs_remove_recursive(musb->debugfs_root);
}