mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 00:48:50 +00:00
af9597adc2
This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).
To facilitate collection of statistics the controller provides the
following two features for each Root Port:
- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
a specified lane)
Note: There is no interrupt for counter overflow.
This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,
30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
the PMU device name for this Root Port is dwc_rootport_3018.
Example usage of counting PCIe RX TLP data payload (Units of bytes)::
$# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
average RX bandwidth can be calculated like this:
PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-5-xueshuai@linux.alibaba.com
[will: Fix sparse error due to use of uninitialised 'vsec' symbol in
dwc_pcie_match_des_cap()]
Signed-off-by: Will Deacon <will@kernel.org>
244 lines
7.4 KiB
Text
244 lines
7.4 KiB
Text
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Performance Monitor Drivers
|
|
#
|
|
|
|
menu "Performance monitor support"
|
|
depends on PERF_EVENTS
|
|
|
|
config ARM_CCI_PMU
|
|
tristate "ARM CCI PMU driver"
|
|
depends on (ARM && CPU_V7) || ARM64
|
|
select ARM_CCI
|
|
help
|
|
Support for PMU events monitoring on the ARM CCI (Cache Coherent
|
|
Interconnect) family of products.
|
|
|
|
If compiled as a module, it will be called arm-cci.
|
|
|
|
config ARM_CCI400_PMU
|
|
bool "support CCI-400"
|
|
default y
|
|
depends on ARM_CCI_PMU
|
|
select ARM_CCI400_COMMON
|
|
help
|
|
CCI-400 provides 4 independent event counters counting events related
|
|
to the connected slave/master interfaces, plus a cycle counter.
|
|
|
|
config ARM_CCI5xx_PMU
|
|
bool "support CCI-500/CCI-550"
|
|
default y
|
|
depends on ARM_CCI_PMU
|
|
help
|
|
CCI-500/CCI-550 both provide 8 independent event counters, which can
|
|
count events pertaining to the slave/master interfaces as well as the
|
|
internal events to the CCI.
|
|
|
|
config ARM_CCN
|
|
tristate "ARM CCN driver support"
|
|
depends on ARM || ARM64 || COMPILE_TEST
|
|
help
|
|
PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
|
|
interconnect.
|
|
|
|
config ARM_CMN
|
|
tristate "Arm CMN-600 PMU support"
|
|
depends on ARM64 || COMPILE_TEST
|
|
help
|
|
Support for PMU events monitoring on the Arm CMN-600 Coherent Mesh
|
|
Network interconnect.
|
|
|
|
config ARM_PMU
|
|
depends on ARM || ARM64
|
|
bool "ARM PMU framework"
|
|
default y
|
|
help
|
|
Say y if you want to use CPU performance monitors on ARM-based
|
|
systems.
|
|
|
|
config RISCV_PMU
|
|
depends on RISCV
|
|
bool "RISC-V PMU framework"
|
|
default y
|
|
help
|
|
Say y if you want to use CPU performance monitors on RISCV-based
|
|
systems. This provides the core PMU framework that abstracts common
|
|
PMU functionalities in a core library so that different PMU drivers
|
|
can reuse it.
|
|
|
|
config RISCV_PMU_LEGACY
|
|
depends on RISCV_PMU
|
|
bool "RISC-V legacy PMU implementation"
|
|
default y
|
|
help
|
|
Say y if you want to use the legacy CPU performance monitor
|
|
implementation on RISC-V based systems. This only allows counting
|
|
of cycle/instruction counter and doesn't support counter overflow,
|
|
or programmable counters. It will be removed in future.
|
|
|
|
config RISCV_PMU_SBI
|
|
depends on RISCV_PMU && RISCV_SBI
|
|
bool "RISC-V PMU based on SBI PMU extension"
|
|
default y
|
|
help
|
|
Say y if you want to use the CPU performance monitor
|
|
using SBI PMU extension on RISC-V based systems. This option provides
|
|
full perf feature support i.e. counter overflow, privilege mode
|
|
filtering, counter configuration.
|
|
|
|
config ARM_PMU_ACPI
|
|
depends on ARM_PMU && ACPI
|
|
def_bool y
|
|
|
|
config ARM_SMMU_V3_PMU
|
|
tristate "ARM SMMUv3 Performance Monitors Extension"
|
|
depends on ARM64 || (COMPILE_TEST && 64BIT)
|
|
depends on GENERIC_MSI_IRQ
|
|
help
|
|
Provides support for the ARM SMMUv3 Performance Monitor Counter
|
|
Groups (PMCG), which provide monitoring of transactions passing
|
|
through the SMMU and allow the resulting information to be filtered
|
|
based on the Stream ID of the corresponding master.
|
|
|
|
config ARM_PMUV3
|
|
depends on HW_PERF_EVENTS && ((ARM && CPU_V7) || ARM64)
|
|
bool "ARM PMUv3 support" if !ARM64
|
|
default ARM64
|
|
help
|
|
Say y if you want to use the ARM performance monitor unit (PMU)
|
|
version 3. The PMUv3 is the CPU performance monitors on ARMv8
|
|
(aarch32 and aarch64) systems that implement the PMUv3
|
|
architecture.
|
|
|
|
config ARM_DSU_PMU
|
|
tristate "ARM DynamIQ Shared Unit (DSU) PMU"
|
|
depends on ARM64
|
|
help
|
|
Provides support for performance monitor unit in ARM DynamIQ Shared
|
|
Unit (DSU). The DSU integrates one or more cores with an L3 memory
|
|
system, control logic. The PMU allows counting various events related
|
|
to DSU.
|
|
|
|
config FSL_IMX8_DDR_PMU
|
|
tristate "Freescale i.MX8 DDR perf monitor"
|
|
depends on ARCH_MXC || COMPILE_TEST
|
|
help
|
|
Provides support for the DDR performance monitor in i.MX8, which
|
|
can give information about memory throughput and other related
|
|
events.
|
|
|
|
config FSL_IMX9_DDR_PMU
|
|
tristate "Freescale i.MX9 DDR perf monitor"
|
|
depends on ARCH_MXC
|
|
help
|
|
Provides support for the DDR performance monitor in i.MX9, which
|
|
can give information about memory throughput and other related
|
|
events.
|
|
|
|
config QCOM_L2_PMU
|
|
bool "Qualcomm Technologies L2-cache PMU"
|
|
depends on ARCH_QCOM && ARM64 && ACPI
|
|
select QCOM_KRYO_L2_ACCESSORS
|
|
help
|
|
Provides support for the L2 cache performance monitor unit (PMU)
|
|
in Qualcomm Technologies processors.
|
|
Adds the L2 cache PMU into the perf events subsystem for
|
|
monitoring L2 cache events.
|
|
|
|
config QCOM_L3_PMU
|
|
bool "Qualcomm Technologies L3-cache PMU"
|
|
depends on ARCH_QCOM && ARM64 && ACPI
|
|
select QCOM_IRQ_COMBINER
|
|
help
|
|
Provides support for the L3 cache performance monitor unit (PMU)
|
|
in Qualcomm Technologies processors.
|
|
Adds the L3 cache PMU into the perf events subsystem for
|
|
monitoring L3 cache events.
|
|
|
|
config THUNDERX2_PMU
|
|
tristate "Cavium ThunderX2 SoC PMU UNCORE"
|
|
depends on ARCH_THUNDER2 || COMPILE_TEST
|
|
depends on NUMA && ACPI
|
|
default m
|
|
help
|
|
Provides support for ThunderX2 UNCORE events.
|
|
The SoC has PMU support in its L3 cache controller (L3C) and
|
|
in the DDR4 Memory Controller (DMC).
|
|
|
|
config XGENE_PMU
|
|
depends on ARCH_XGENE || (COMPILE_TEST && 64BIT)
|
|
bool "APM X-Gene SoC PMU"
|
|
default n
|
|
help
|
|
Say y if you want to use APM X-Gene SoC performance monitors.
|
|
|
|
config ARM_SPE_PMU
|
|
tristate "Enable support for the ARMv8.2 Statistical Profiling Extension"
|
|
depends on ARM64
|
|
help
|
|
Enable perf support for the ARMv8.2 Statistical Profiling
|
|
Extension, which provides periodic sampling of operations in
|
|
the CPU pipeline and reports this via the perf AUX interface.
|
|
|
|
config ARM_DMC620_PMU
|
|
tristate "Enable PMU support for the ARM DMC-620 memory controller"
|
|
depends on (ARM64 && ACPI) || COMPILE_TEST
|
|
help
|
|
Support for PMU events monitoring on the ARM DMC-620 memory
|
|
controller.
|
|
|
|
config MARVELL_CN10K_TAD_PMU
|
|
tristate "Marvell CN10K LLC-TAD PMU"
|
|
depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT)
|
|
help
|
|
Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
|
|
performance monitors on CN10K family silicons.
|
|
|
|
config APPLE_M1_CPU_PMU
|
|
bool "Apple M1 CPU PMU support"
|
|
depends on ARM_PMU && ARCH_APPLE
|
|
help
|
|
Provides support for the non-architectural CPU PMUs present on
|
|
the Apple M1 SoCs and derivatives.
|
|
|
|
config ALIBABA_UNCORE_DRW_PMU
|
|
tristate "Alibaba T-Head Yitian 710 DDR Sub-system Driveway PMU driver"
|
|
depends on (ARM64 && ACPI) || COMPILE_TEST
|
|
help
|
|
Support for Driveway PMU events monitoring on Yitian 710 DDR
|
|
Sub-system.
|
|
|
|
source "drivers/perf/hisilicon/Kconfig"
|
|
|
|
config MARVELL_CN10K_DDR_PMU
|
|
tristate "Enable MARVELL CN10K DRAM Subsystem(DSS) PMU Support"
|
|
depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT)
|
|
help
|
|
Enable perf support for Marvell DDR Performance monitoring
|
|
event on CN10K platform.
|
|
|
|
config DWC_PCIE_PMU
|
|
tristate "Synopsys DesignWare PCIe PMU"
|
|
depends on PCI
|
|
help
|
|
Enable perf support for Synopsys DesignWare PCIe PMU Performance
|
|
monitoring event on platform including the Alibaba Yitian 710.
|
|
|
|
source "drivers/perf/arm_cspmu/Kconfig"
|
|
|
|
source "drivers/perf/amlogic/Kconfig"
|
|
|
|
config CXL_PMU
|
|
tristate "CXL Performance Monitoring Unit"
|
|
depends on CXL_BUS
|
|
help
|
|
Support performance monitoring as defined in CXL rev 3.0
|
|
section 13.2: Performance Monitoring. CXL components may have
|
|
one or more CXL Performance Monitoring Units (CPMUs).
|
|
|
|
Say 'y/m' to enable a driver that will attach to performance
|
|
monitoring units and provide standard perf based interfaces.
|
|
|
|
If unsure say 'm'.
|
|
|
|
endmenu
|