linux-stable/fs/ceph/ioctl.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

101 lines
3.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef FS_CEPH_IOCTL_H
#define FS_CEPH_IOCTL_H
#include <linux/ioctl.h>
#include <linux/types.h>
#define CEPH_IOCTL_MAGIC 0x97
/*
* CEPH_IOC_GET_LAYOUT - get file layout or dir layout policy
* CEPH_IOC_SET_LAYOUT - set file layout
* CEPH_IOC_SET_LAYOUT_POLICY - set dir layout policy
*
* The file layout specifies how file data is striped over objects in
* the distributed object store, which object pool they belong to (if
* it differs from the default), and an optional 'preferred osd' to
* store them on.
*
* Files get a new layout based on the policy set on the containing
* directory or one of its ancestors. The GET_LAYOUT ioctl will let
* you examine the layout for a file or the policy on a directory.
*
* SET_LAYOUT will let you set a layout on a newly created file. This
* only works immediately after the file is created and before any
* data is written to it.
*
* SET_LAYOUT_POLICY will let you set a layout policy (default layout)
* on a directory that will apply to any new files created in that
* directory (or any child directory that doesn't specify a layout of
* its own).
*/
/* use u64 to align sanely on all archs */
struct ceph_ioctl_layout {
__u64 stripe_unit, stripe_count, object_size;
__u64 data_pool;
/* obsolete. new values ignored, always return -1 */
__s64 preferred_osd;
};
#define CEPH_IOC_GET_LAYOUT _IOR(CEPH_IOCTL_MAGIC, 1, \
struct ceph_ioctl_layout)
#define CEPH_IOC_SET_LAYOUT _IOW(CEPH_IOCTL_MAGIC, 2, \
struct ceph_ioctl_layout)
#define CEPH_IOC_SET_LAYOUT_POLICY _IOW(CEPH_IOCTL_MAGIC, 5, \
struct ceph_ioctl_layout)
/*
* CEPH_IOC_GET_DATALOC - get location of file data in the cluster
*
* Extract identity, address of the OSD and object storing a given
* file offset.
*/
struct ceph_ioctl_dataloc {
__u64 file_offset; /* in+out: file offset */
__u64 object_offset; /* out: offset in object */
__u64 object_no; /* out: object # */
__u64 object_size; /* out: object size */
char object_name[64]; /* out: object name */
__u64 block_offset; /* out: offset in block */
__u64 block_size; /* out: block length */
__s64 osd; /* out: osd # */
struct sockaddr_storage osd_addr; /* out: osd address */
};
#define CEPH_IOC_GET_DATALOC _IOWR(CEPH_IOCTL_MAGIC, 3, \
struct ceph_ioctl_dataloc)
/*
* CEPH_IOC_LAZYIO - relax consistency
*
* Normally Ceph switches to synchronous IO when multiple clients have
* the file open (and or more for write). Reads and writes bypass the
* page cache and go directly to the OSD. Setting this flag on a file
* descriptor will allow buffered IO for this file in cases where the
* application knows it won't interfere with other nodes (or doesn't
* care).
*/
#define CEPH_IOC_LAZYIO _IO(CEPH_IOCTL_MAGIC, 4)
/*
* CEPH_IOC_SYNCIO - force synchronous IO
*
* This ioctl sets a file flag that forces the synchronous IO that
* bypasses the page cache, even if it is not necessary. This is
* essentially the opposite behavior of IOC_LAZYIO. This forces the
* same read/write path as a file opened by multiple clients when one
* or more of those clients is opened for write.
*
* Note that this type of sync IO takes a different path than a file
* opened with O_SYNC/D_SYNC (writes hit the page cache and are
* immediately flushed on page boundaries). It is very similar to
* O_DIRECT (writes bypass the page cache) excep that O_DIRECT writes
* are not copied (user page must remain stable) and O_DIRECT writes
* have alignment restrictions (on the buffer and file offset).
*/
#define CEPH_IOC_SYNCIO _IO(CEPH_IOCTL_MAGIC, 5)
#endif