mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-12 05:48:40 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/bluetooth
History
Oliver Neukum b131237ca3 Bluetooth: Enable Atheros 0cf3:311e for firmware upload 
The device will bind to btusb without firmware, but with the original
buggy firmware device discovery does not work. No devices are detected.

Device descriptor without firmware:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=311e Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

with firmware:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=311e Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13 09:51:36 +02:00
..
ath3k.c Bluetooth: Enable Atheros 0cf3:311e for firmware upload 2014-02-13 09:51:36 +02:00
bcm203x.c Bluetooth: Use devm_kzalloc in bcm203x.c file. 2012-08-06 15:03:00 -03:00
bfusb.c Bluetooth: Declare bfusb_table[] as const 2013-10-11 17:05:20 +02:00
bluecard_cs.c Bluetooth: Remove pointless parameter check in bluecard_hci_send_frame() 2013-10-11 16:57:15 +02:00
bpa10x.c Bluetooth: Declare bpa10x_table[] as const 2013-10-11 17:05:22 +02:00
bt3c_cs.c Bluetooth: Remove pointless parameter check in bt3c_hci_send_frame() 2013-10-11 16:57:27 +02:00
btmrvl_debugfs.c Bluetooth: replace strict_strtol() with kstrtol() 2013-07-25 14:15:25 +01:00
btmrvl_drv.h Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy 2013-12-04 11:09:03 -02:00
btmrvl_main.c Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy 2013-12-04 11:09:03 -02:00
btmrvl_sdio.c Bluetooth: btmrvl: use cal-data from device-tree instead of conf file 2013-12-04 11:09:03 -02:00
btmrvl_sdio.h Bluetooth: btmrvl: use cal-data from device-tree instead of conf file 2013-12-04 11:09:03 -02:00
btsdio.c Bluetooth: Use MD SET register for changing SDIO Type-B to Type-A 2013-12-29 21:31:07 +02:00
btuart_cs.c Bluetooth: Remove pointless parameter check in btuart_hci_send_frame() 2013-10-11 17:00:02 +02:00
btusb.c Bluetooth: Enable Atheros 0cf3:311e for firmware upload 2014-02-13 09:51:36 +02:00
btwilink.c Bluetooth: Add hdev parameter to hdev->send driver callback 2013-10-11 15:28:03 +02:00
dtl1_cs.c Bluetooth: Remove pointless parameter check in dtl1_hci_send_frame() 2013-10-11 17:00:08 +02:00
hci_ath.c tty: move the termios object into the tty 2012-07-16 13:00:41 -07:00
hci_bcsp.c Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback 2013-10-11 09:45:34 +02:00
hci_h4.c Bluetooth: Remove unused h4_check_data_len() function 2013-10-11 07:51:09 +02:00
hci_h5.c Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback 2013-10-11 09:45:34 +02:00
hci_ldisc.c Bluetooth: Remove pointless parameter check in hci_uart_send_frame() 2013-10-11 17:00:24 +02:00
hci_ll.c Bluetooth: Add hdev parameter to hdev->send driver callback 2013-10-11 15:28:03 +02:00
hci_uart.h Bluetooth: Add delayed init sequence support for UART controllers 2012-07-17 14:48:29 -03:00
hci_vhci.c Bluetooth: Add support for vectored writes to virtual HCI driver 2013-12-29 21:25:52 +02:00
Kconfig Bluetooth: btmrvl: support Marvell Bluetooth device SD8897 2013-06-12 10:20:54 -04:00
Makefile Bluetooth: Enable -D__CHECK_ENDIAN__ for sparse by default 2013-10-02 09:10:05 +03:00