linux-stable/drivers/input/mouse/cyapa_gen3.c
Dudley Du 3cd4786943 Input: cyapa - fix for losing events during device power transitions
When changing the scan rate as part of runtime-resume process we may lose
some of the events, because:

1) for gen3 trackpads, the driver must msleep() some time to ensure that
the device is ready to accept next command;

2) for gen5 and later trackpads, the queue dumping function will simply
ignore the events when waiting for the set power mode command response.

The solution is to keep polling and report those valid events when the set
power mode command is in progress.

Signed-off-by: Dudley Du <dudl@cypress.com>
Tested-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04 11:32:13 -08:00

1303 lines
38 KiB
C

/*
* Cypress APA trackpad with I2C interface
*
* Author: Dudley Du <dudl@cypress.com>
* Further cleanup and restructuring by:
* Daniel Kurtz <djkurtz@chromium.org>
* Benson Leung <bleung@chromium.org>
*
* Copyright (C) 2011-2015 Cypress Semiconductor, Inc.
* Copyright (C) 2011-2012 Google, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
#include "cyapa.h"
#define GEN3_MAX_FINGERS 5
#define GEN3_FINGER_NUM(x) (((x) >> 4) & 0x07)
#define BLK_HEAD_BYTES 32
/* Macro for register map group offset. */
#define PRODUCT_ID_SIZE 16
#define QUERY_DATA_SIZE 27
#define REG_PROTOCOL_GEN_QUERY_OFFSET 20
#define REG_OFFSET_DATA_BASE 0x0000
#define REG_OFFSET_COMMAND_BASE 0x0028
#define REG_OFFSET_QUERY_BASE 0x002a
#define CYAPA_OFFSET_SOFT_RESET REG_OFFSET_COMMAND_BASE
#define OP_RECALIBRATION_MASK 0x80
#define OP_REPORT_BASELINE_MASK 0x40
#define REG_OFFSET_MAX_BASELINE 0x0026
#define REG_OFFSET_MIN_BASELINE 0x0027
#define REG_OFFSET_POWER_MODE (REG_OFFSET_COMMAND_BASE + 1)
#define SET_POWER_MODE_DELAY 10000 /* Unit: us */
#define SET_POWER_MODE_TRIES 5
#define GEN3_BL_CMD_CHECKSUM_SEED 0xff
#define GEN3_BL_CMD_INITIATE_BL 0x38
#define GEN3_BL_CMD_WRITE_BLOCK 0x39
#define GEN3_BL_CMD_VERIFY_BLOCK 0x3a
#define GEN3_BL_CMD_TERMINATE_BL 0x3b
#define GEN3_BL_CMD_LAUNCH_APP 0xa5
/*
* CYAPA trackpad device states.
* Used in register 0x00, bit1-0, DeviceStatus field.
* Other values indicate device is in an abnormal state and must be reset.
*/
#define CYAPA_DEV_NORMAL 0x03
#define CYAPA_DEV_BUSY 0x01
#define CYAPA_FW_BLOCK_SIZE 64
#define CYAPA_FW_READ_SIZE 16
#define CYAPA_FW_HDR_START 0x0780
#define CYAPA_FW_HDR_BLOCK_COUNT 2
#define CYAPA_FW_HDR_BLOCK_START (CYAPA_FW_HDR_START / CYAPA_FW_BLOCK_SIZE)
#define CYAPA_FW_HDR_SIZE (CYAPA_FW_HDR_BLOCK_COUNT * \
CYAPA_FW_BLOCK_SIZE)
#define CYAPA_FW_DATA_START 0x0800
#define CYAPA_FW_DATA_BLOCK_COUNT 480
#define CYAPA_FW_DATA_BLOCK_START (CYAPA_FW_DATA_START / CYAPA_FW_BLOCK_SIZE)
#define CYAPA_FW_DATA_SIZE (CYAPA_FW_DATA_BLOCK_COUNT * \
CYAPA_FW_BLOCK_SIZE)
#define CYAPA_FW_SIZE (CYAPA_FW_HDR_SIZE + CYAPA_FW_DATA_SIZE)
#define CYAPA_CMD_LEN 16
#define GEN3_BL_IDLE_FW_MAJ_VER_OFFSET 0x0b
#define GEN3_BL_IDLE_FW_MIN_VER_OFFSET (GEN3_BL_IDLE_FW_MAJ_VER_OFFSET + 1)
struct cyapa_touch {
/*
* high bits or x/y position value
* bit 7 - 4: high 4 bits of x position value
* bit 3 - 0: high 4 bits of y position value
*/
u8 xy_hi;
u8 x_lo; /* low 8 bits of x position value. */
u8 y_lo; /* low 8 bits of y position value. */
u8 pressure;
/* id range is 1 - 15. It is incremented with every new touch. */
u8 id;
} __packed;
struct cyapa_reg_data {
/*
* bit 0 - 1: device status
* bit 3 - 2: power mode
* bit 6 - 4: reserved
* bit 7: interrupt valid bit
*/
u8 device_status;
/*
* bit 7 - 4: number of fingers currently touching pad
* bit 3: valid data check bit
* bit 2: middle mechanism button state if exists
* bit 1: right mechanism button state if exists
* bit 0: left mechanism button state if exists
*/
u8 finger_btn;
/* CYAPA reports up to 5 touches per packet. */
struct cyapa_touch touches[5];
} __packed;
struct gen3_write_block_cmd {
u8 checksum_seed; /* Always be 0xff */
u8 cmd_code; /* command code: 0x39 */
u8 key[8]; /* 8-byte security key */
__be16 block_num;
u8 block_data[CYAPA_FW_BLOCK_SIZE];
u8 block_checksum; /* Calculated using bytes 12 - 75 */
u8 cmd_checksum; /* Calculated using bytes 0-76 */
} __packed;
static const u8 security_key[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 };
static const u8 bl_activate[] = { 0x00, 0xff, 0x38, 0x00, 0x01, 0x02, 0x03,
0x04, 0x05, 0x06, 0x07 };
static const u8 bl_deactivate[] = { 0x00, 0xff, 0x3b, 0x00, 0x01, 0x02, 0x03,
0x04, 0x05, 0x06, 0x07 };
static const u8 bl_exit[] = { 0x00, 0xff, 0xa5, 0x00, 0x01, 0x02, 0x03, 0x04,
0x05, 0x06, 0x07 };
/* for byte read/write command */
#define CMD_RESET 0
#define CMD_POWER_MODE 1
#define CMD_DEV_STATUS 2
#define CMD_REPORT_MAX_BASELINE 3
#define CMD_REPORT_MIN_BASELINE 4
#define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1)
#define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET)
#define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE)
#define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS)
#define CYAPA_SMBUS_MAX_BASELINE SMBUS_BYTE_CMD(CMD_REPORT_MAX_BASELINE)
#define CYAPA_SMBUS_MIN_BASELINE SMBUS_BYTE_CMD(CMD_REPORT_MIN_BASELINE)
/* for group registers read/write command */
#define REG_GROUP_DATA 0
#define REG_GROUP_CMD 2
#define REG_GROUP_QUERY 3
#define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3))
#define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA)
#define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD)
#define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY)
/* for register block read/write command */
#define CMD_BL_STATUS 0
#define CMD_BL_HEAD 1
#define CMD_BL_CMD 2
#define CMD_BL_DATA 3
#define CMD_BL_ALL 4
#define CMD_BLK_PRODUCT_ID 5
#define CMD_BLK_HEAD 6
#define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1))
/* register block read/write command in bootloader mode */
#define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS)
#define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD)
#define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD)
#define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA)
#define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL)
/* register block read/write command in operational mode */
#define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID)
#define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD)
/* for byte read/write command */
#define CMD_RESET 0
#define CMD_POWER_MODE 1
#define CMD_DEV_STATUS 2
#define CMD_REPORT_MAX_BASELINE 3
#define CMD_REPORT_MIN_BASELINE 4
#define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1)
#define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET)
#define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE)
#define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS)
#define CYAPA_SMBUS_MAX_BASELINE SMBUS_BYTE_CMD(CMD_REPORT_MAX_BASELINE)
#define CYAPA_SMBUS_MIN_BASELINE SMBUS_BYTE_CMD(CMD_REPORT_MIN_BASELINE)
/* for group registers read/write command */
#define REG_GROUP_DATA 0
#define REG_GROUP_CMD 2
#define REG_GROUP_QUERY 3
#define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3))
#define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA)
#define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD)
#define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY)
/* for register block read/write command */
#define CMD_BL_STATUS 0
#define CMD_BL_HEAD 1
#define CMD_BL_CMD 2
#define CMD_BL_DATA 3
#define CMD_BL_ALL 4
#define CMD_BLK_PRODUCT_ID 5
#define CMD_BLK_HEAD 6
#define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1))
/* register block read/write command in bootloader mode */
#define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS)
#define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD)
#define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD)
#define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA)
#define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL)
/* register block read/write command in operational mode */
#define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID)
#define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD)
struct cyapa_cmd_len {
u8 cmd;
u8 len;
};
/* maps generic CYAPA_CMD_* code to the I2C equivalent */
static const struct cyapa_cmd_len cyapa_i2c_cmds[] = {
{ CYAPA_OFFSET_SOFT_RESET, 1 }, /* CYAPA_CMD_SOFT_RESET */
{ REG_OFFSET_COMMAND_BASE + 1, 1 }, /* CYAPA_CMD_POWER_MODE */
{ REG_OFFSET_DATA_BASE, 1 }, /* CYAPA_CMD_DEV_STATUS */
{ REG_OFFSET_DATA_BASE, sizeof(struct cyapa_reg_data) },
/* CYAPA_CMD_GROUP_DATA */
{ REG_OFFSET_COMMAND_BASE, 0 }, /* CYAPA_CMD_GROUP_CMD */
{ REG_OFFSET_QUERY_BASE, QUERY_DATA_SIZE }, /* CYAPA_CMD_GROUP_QUERY */
{ BL_HEAD_OFFSET, 3 }, /* CYAPA_CMD_BL_STATUS */
{ BL_HEAD_OFFSET, 16 }, /* CYAPA_CMD_BL_HEAD */
{ BL_HEAD_OFFSET, 16 }, /* CYAPA_CMD_BL_CMD */
{ BL_DATA_OFFSET, 16 }, /* CYAPA_CMD_BL_DATA */
{ BL_HEAD_OFFSET, 32 }, /* CYAPA_CMD_BL_ALL */
{ REG_OFFSET_QUERY_BASE, PRODUCT_ID_SIZE },
/* CYAPA_CMD_BLK_PRODUCT_ID */
{ REG_OFFSET_DATA_BASE, 32 }, /* CYAPA_CMD_BLK_HEAD */
{ REG_OFFSET_MAX_BASELINE, 1 }, /* CYAPA_CMD_MAX_BASELINE */
{ REG_OFFSET_MIN_BASELINE, 1 }, /* CYAPA_CMD_MIN_BASELINE */
};
static const struct cyapa_cmd_len cyapa_smbus_cmds[] = {
{ CYAPA_SMBUS_RESET, 1 }, /* CYAPA_CMD_SOFT_RESET */
{ CYAPA_SMBUS_POWER_MODE, 1 }, /* CYAPA_CMD_POWER_MODE */
{ CYAPA_SMBUS_DEV_STATUS, 1 }, /* CYAPA_CMD_DEV_STATUS */
{ CYAPA_SMBUS_GROUP_DATA, sizeof(struct cyapa_reg_data) },
/* CYAPA_CMD_GROUP_DATA */
{ CYAPA_SMBUS_GROUP_CMD, 2 }, /* CYAPA_CMD_GROUP_CMD */
{ CYAPA_SMBUS_GROUP_QUERY, QUERY_DATA_SIZE },
/* CYAPA_CMD_GROUP_QUERY */
{ CYAPA_SMBUS_BL_STATUS, 3 }, /* CYAPA_CMD_BL_STATUS */
{ CYAPA_SMBUS_BL_HEAD, 16 }, /* CYAPA_CMD_BL_HEAD */
{ CYAPA_SMBUS_BL_CMD, 16 }, /* CYAPA_CMD_BL_CMD */
{ CYAPA_SMBUS_BL_DATA, 16 }, /* CYAPA_CMD_BL_DATA */
{ CYAPA_SMBUS_BL_ALL, 32 }, /* CYAPA_CMD_BL_ALL */
{ CYAPA_SMBUS_BLK_PRODUCT_ID, PRODUCT_ID_SIZE },
/* CYAPA_CMD_BLK_PRODUCT_ID */
{ CYAPA_SMBUS_BLK_HEAD, 16 }, /* CYAPA_CMD_BLK_HEAD */
{ CYAPA_SMBUS_MAX_BASELINE, 1 }, /* CYAPA_CMD_MAX_BASELINE */
{ CYAPA_SMBUS_MIN_BASELINE, 1 }, /* CYAPA_CMD_MIN_BASELINE */
};
static int cyapa_gen3_try_poll_handler(struct cyapa *cyapa);
/*
* cyapa_smbus_read_block - perform smbus block read command
* @cyapa - private data structure of the driver
* @cmd - the properly encoded smbus command
* @len - expected length of smbus command result
* @values - buffer to store smbus command result
*
* Returns negative errno, else the number of bytes written.
*
* Note:
* In trackpad device, the memory block allocated for I2C register map
* is 256 bytes, so the max read block for I2C bus is 256 bytes.
*/
ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len,
u8 *values)
{
ssize_t ret;
u8 index;
u8 smbus_cmd;
u8 *buf;
struct i2c_client *client = cyapa->client;
if (!(SMBUS_BYTE_BLOCK_CMD_MASK & cmd))
return -EINVAL;
if (SMBUS_GROUP_BLOCK_CMD_MASK & cmd) {
/* read specific block registers command. */
smbus_cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ);
ret = i2c_smbus_read_block_data(client, smbus_cmd, values);
goto out;
}
ret = 0;
for (index = 0; index * I2C_SMBUS_BLOCK_MAX < len; index++) {
smbus_cmd = SMBUS_ENCODE_IDX(cmd, index);
smbus_cmd = SMBUS_ENCODE_RW(smbus_cmd, SMBUS_READ);
buf = values + I2C_SMBUS_BLOCK_MAX * index;
ret = i2c_smbus_read_block_data(client, smbus_cmd, buf);
if (ret < 0)
goto out;
}
out:
return ret > 0 ? len : ret;
}
static s32 cyapa_read_byte(struct cyapa *cyapa, u8 cmd_idx)
{
u8 cmd;
if (cyapa->smbus) {
cmd = cyapa_smbus_cmds[cmd_idx].cmd;
cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ);
} else {
cmd = cyapa_i2c_cmds[cmd_idx].cmd;
}
return i2c_smbus_read_byte_data(cyapa->client, cmd);
}
static s32 cyapa_write_byte(struct cyapa *cyapa, u8 cmd_idx, u8 value)
{
u8 cmd;
if (cyapa->smbus) {
cmd = cyapa_smbus_cmds[cmd_idx].cmd;
cmd = SMBUS_ENCODE_RW(cmd, SMBUS_WRITE);
} else {
cmd = cyapa_i2c_cmds[cmd_idx].cmd;
}
return i2c_smbus_write_byte_data(cyapa->client, cmd, value);
}
ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len,
u8 *values)
{
return i2c_smbus_read_i2c_block_data(cyapa->client, reg, len, values);
}
static ssize_t cyapa_i2c_reg_write_block(struct cyapa *cyapa, u8 reg,
size_t len, const u8 *values)
{
return i2c_smbus_write_i2c_block_data(cyapa->client, reg, len, values);
}
ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values)
{
u8 cmd;
size_t len;
if (cyapa->smbus) {
cmd = cyapa_smbus_cmds[cmd_idx].cmd;
len = cyapa_smbus_cmds[cmd_idx].len;
return cyapa_smbus_read_block(cyapa, cmd, len, values);
}
cmd = cyapa_i2c_cmds[cmd_idx].cmd;
len = cyapa_i2c_cmds[cmd_idx].len;
return cyapa_i2c_reg_read_block(cyapa, cmd, len, values);
}
/*
* Determine the Gen3 trackpad device's current operating state.
*
*/
static int cyapa_gen3_state_parse(struct cyapa *cyapa, u8 *reg_data, int len)
{
cyapa->state = CYAPA_STATE_NO_DEVICE;
/* Parse based on Gen3 characteristic registers and bits */
if (reg_data[REG_BL_FILE] == BL_FILE &&
reg_data[REG_BL_ERROR] == BL_ERROR_NO_ERR_IDLE &&
(reg_data[REG_BL_STATUS] ==
(BL_STATUS_RUNNING | BL_STATUS_CSUM_VALID) ||
reg_data[REG_BL_STATUS] == BL_STATUS_RUNNING)) {
/*
* Normal state after power on or reset,
* REG_BL_STATUS == 0x11, firmware image checksum is valid.
* REG_BL_STATUS == 0x10, firmware image checksum is invalid.
*/
cyapa->gen = CYAPA_GEN3;
cyapa->state = CYAPA_STATE_BL_IDLE;
} else if (reg_data[REG_BL_FILE] == BL_FILE &&
(reg_data[REG_BL_STATUS] & BL_STATUS_RUNNING) ==
BL_STATUS_RUNNING) {
cyapa->gen = CYAPA_GEN3;
if (reg_data[REG_BL_STATUS] & BL_STATUS_BUSY) {
cyapa->state = CYAPA_STATE_BL_BUSY;
} else {
if ((reg_data[REG_BL_ERROR] & BL_ERROR_BOOTLOADING) ==
BL_ERROR_BOOTLOADING)
cyapa->state = CYAPA_STATE_BL_ACTIVE;
else
cyapa->state = CYAPA_STATE_BL_IDLE;
}
} else if ((reg_data[REG_OP_STATUS] & OP_STATUS_SRC) &&
(reg_data[REG_OP_DATA1] & OP_DATA_VALID)) {
/*
* Normal state when running in operational mode,
* may also not in full power state or
* busying in command process.
*/
if (GEN3_FINGER_NUM(reg_data[REG_OP_DATA1]) <=
GEN3_MAX_FINGERS) {
/* Finger number data is valid. */
cyapa->gen = CYAPA_GEN3;
cyapa->state = CYAPA_STATE_OP;
}
} else if (reg_data[REG_OP_STATUS] == 0x0C &&
reg_data[REG_OP_DATA1] == 0x08) {
/* Op state when first two registers overwritten with 0x00 */
cyapa->gen = CYAPA_GEN3;
cyapa->state = CYAPA_STATE_OP;
} else if (reg_data[REG_BL_STATUS] &
(BL_STATUS_RUNNING | BL_STATUS_BUSY)) {
cyapa->gen = CYAPA_GEN3;
cyapa->state = CYAPA_STATE_BL_BUSY;
}
if (cyapa->gen == CYAPA_GEN3 && (cyapa->state == CYAPA_STATE_OP ||
cyapa->state == CYAPA_STATE_BL_IDLE ||
cyapa->state == CYAPA_STATE_BL_ACTIVE ||
cyapa->state == CYAPA_STATE_BL_BUSY))
return 0;
return -EAGAIN;
}
/*
* Enter bootloader by soft resetting the device.
*
* If device is already in the bootloader, the function just returns.
* Otherwise, reset the device; after reset, device enters bootloader idle
* state immediately.
*
* Returns:
* 0 on success
* -EAGAIN device was reset, but is not now in bootloader idle state
* < 0 if the device never responds within the timeout
*/
static int cyapa_gen3_bl_enter(struct cyapa *cyapa)
{
int error;
int waiting_time;
error = cyapa_poll_state(cyapa, 500);
if (error)
return error;
if (cyapa->state == CYAPA_STATE_BL_IDLE) {
/* Already in BL_IDLE. Skipping reset. */
return 0;
}
if (cyapa->state != CYAPA_STATE_OP)
return -EAGAIN;
cyapa->operational = false;
cyapa->state = CYAPA_STATE_NO_DEVICE;
error = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET, 0x01);
if (error)
return -EIO;
usleep_range(25000, 50000);
waiting_time = 2000; /* For some shipset, max waiting time is 1~2s. */
do {
error = cyapa_poll_state(cyapa, 500);
if (error) {
if (error == -ETIMEDOUT) {
waiting_time -= 500;
continue;
}
return error;
}
if ((cyapa->state == CYAPA_STATE_BL_IDLE) &&
!(cyapa->status[REG_BL_STATUS] & BL_STATUS_WATCHDOG))
break;
msleep(100);
waiting_time -= 100;
} while (waiting_time > 0);
if ((cyapa->state != CYAPA_STATE_BL_IDLE) ||
(cyapa->status[REG_BL_STATUS] & BL_STATUS_WATCHDOG))
return -EAGAIN;
return 0;
}
static int cyapa_gen3_bl_activate(struct cyapa *cyapa)
{
int error;
error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_activate),
bl_activate);
if (error)
return error;
/* Wait for bootloader to activate; takes between 2 and 12 seconds */
msleep(2000);
error = cyapa_poll_state(cyapa, 11000);
if (error)
return error;
if (cyapa->state != CYAPA_STATE_BL_ACTIVE)
return -EAGAIN;
return 0;
}
static int cyapa_gen3_bl_deactivate(struct cyapa *cyapa)
{
int error;
error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
bl_deactivate);
if (error)
return error;
/* Wait for bootloader to switch to idle state; should take < 100ms */
msleep(100);
error = cyapa_poll_state(cyapa, 500);
if (error)
return error;
if (cyapa->state != CYAPA_STATE_BL_IDLE)
return -EAGAIN;
return 0;
}
/*
* Exit bootloader
*
* Send bl_exit command, then wait 50 - 100 ms to let device transition to
* operational mode. If this is the first time the device's firmware is
* running, it can take up to 2 seconds to calibrate its sensors. So, poll
* the device's new state for up to 2 seconds.
*
* Returns:
* -EIO failure while reading from device
* -EAGAIN device is stuck in bootloader, b/c it has invalid firmware
* 0 device is supported and in operational mode
*/
static int cyapa_gen3_bl_exit(struct cyapa *cyapa)
{
int error;
error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
if (error)
return error;
/*
* Wait for bootloader to exit, and operation mode to start.
* Normally, this takes at least 50 ms.
*/
usleep_range(50000, 100000);
/*
* In addition, when a device boots for the first time after being
* updated to new firmware, it must first calibrate its sensors, which
* can take up to an additional 2 seconds. If the device power is
* running low, this may take even longer.
*/
error = cyapa_poll_state(cyapa, 4000);
if (error < 0)
return error;
if (cyapa->state != CYAPA_STATE_OP)
return -EAGAIN;
return 0;
}
static u16 cyapa_gen3_csum(const u8 *buf, size_t count)
{
int i;
u16 csum = 0;
for (i = 0; i < count; i++)
csum += buf[i];
return csum;
}
/*
* Verify the integrity of a CYAPA firmware image file.
*
* The firmware image file is 30848 bytes, composed of 482 64-byte blocks.
*
* The first 2 blocks are the firmware header.
* The next 480 blocks are the firmware image.
*
* The first two bytes of the header hold the header checksum, computed by
* summing the other 126 bytes of the header.
* The last two bytes of the header hold the firmware image checksum, computed
* by summing the 30720 bytes of the image modulo 0xffff.
*
* Both checksums are stored little-endian.
*/
static int cyapa_gen3_check_fw(struct cyapa *cyapa, const struct firmware *fw)
{
struct device *dev = &cyapa->client->dev;
u16 csum;
u16 csum_expected;
/* Firmware must match exact 30848 bytes = 482 64-byte blocks. */
if (fw->size != CYAPA_FW_SIZE) {
dev_err(dev, "invalid firmware size = %zu, expected %u.\n",
fw->size, CYAPA_FW_SIZE);
return -EINVAL;
}
/* Verify header block */
csum_expected = (fw->data[0] << 8) | fw->data[1];
csum = cyapa_gen3_csum(&fw->data[2], CYAPA_FW_HDR_SIZE - 2);
if (csum != csum_expected) {
dev_err(dev, "%s %04x, expected: %04x\n",
"invalid firmware header checksum = ",
csum, csum_expected);
return -EINVAL;
}
/* Verify firmware image */
csum_expected = (fw->data[CYAPA_FW_HDR_SIZE - 2] << 8) |
fw->data[CYAPA_FW_HDR_SIZE - 1];
csum = cyapa_gen3_csum(&fw->data[CYAPA_FW_HDR_SIZE],
CYAPA_FW_DATA_SIZE);
if (csum != csum_expected) {
dev_err(dev, "%s %04x, expected: %04x\n",
"invalid firmware header checksum = ",
csum, csum_expected);
return -EINVAL;
}
return 0;
}
/*
* Write a |len| byte long buffer |buf| to the device, by chopping it up into a
* sequence of smaller |CYAPA_CMD_LEN|-length write commands.
*
* The data bytes for a write command are prepended with the 1-byte offset
* of the data relative to the start of |buf|.
*/
static int cyapa_gen3_write_buffer(struct cyapa *cyapa,
const u8 *buf, size_t len)
{
int error;
size_t i;
unsigned char cmd[CYAPA_CMD_LEN + 1];
size_t cmd_len;
for (i = 0; i < len; i += CYAPA_CMD_LEN) {
const u8 *payload = &buf[i];
cmd_len = (len - i >= CYAPA_CMD_LEN) ? CYAPA_CMD_LEN : len - i;
cmd[0] = i;
memcpy(&cmd[1], payload, cmd_len);
error = cyapa_i2c_reg_write_block(cyapa, 0, cmd_len + 1, cmd);
if (error)
return error;
}
return 0;
}
/*
* A firmware block write command writes 64 bytes of data to a single flash
* page in the device. The 78-byte block write command has the format:
* <0xff> <CMD> <Key> <Start> <Data> <Data-Checksum> <CMD Checksum>
*
* <0xff> - every command starts with 0xff
* <CMD> - the write command value is 0x39
* <Key> - write commands include an 8-byte key: { 00 01 02 03 04 05 06 07 }
* <Block> - Memory Block number (address / 64) (16-bit, big-endian)
* <Data> - 64 bytes of firmware image data
* <Data Checksum> - sum of 64 <Data> bytes, modulo 0xff
* <CMD Checksum> - sum of 77 bytes, from 0xff to <Data Checksum>
*
* Each write command is split into 5 i2c write transactions of up to 16 bytes.
* Each transaction starts with an i2c register offset: (00, 10, 20, 30, 40).
*/
static int cyapa_gen3_write_fw_block(struct cyapa *cyapa,
u16 block, const u8 *data)
{
int ret;
struct gen3_write_block_cmd write_block_cmd;
u8 status[BL_STATUS_SIZE];
int tries;
u8 bl_status, bl_error;
/* Set write command and security key bytes. */
write_block_cmd.checksum_seed = GEN3_BL_CMD_CHECKSUM_SEED;
write_block_cmd.cmd_code = GEN3_BL_CMD_WRITE_BLOCK;
memcpy(write_block_cmd.key, security_key, sizeof(security_key));
put_unaligned_be16(block, &write_block_cmd.block_num);
memcpy(write_block_cmd.block_data, data, CYAPA_FW_BLOCK_SIZE);
write_block_cmd.block_checksum = cyapa_gen3_csum(
write_block_cmd.block_data, CYAPA_FW_BLOCK_SIZE);
write_block_cmd.cmd_checksum = cyapa_gen3_csum((u8 *)&write_block_cmd,
sizeof(write_block_cmd) - 1);
ret = cyapa_gen3_write_buffer(cyapa, (u8 *)&write_block_cmd,
sizeof(write_block_cmd));
if (ret)
return ret;
/* Wait for write to finish */
tries = 11; /* Programming for one block can take about 100ms. */
do {
usleep_range(10000, 20000);
/* Check block write command result status. */
ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET,
BL_STATUS_SIZE, status);
if (ret != BL_STATUS_SIZE)
return (ret < 0) ? ret : -EIO;
} while ((status[REG_BL_STATUS] & BL_STATUS_BUSY) && --tries);
/* Ignore WATCHDOG bit and reserved bits. */
bl_status = status[REG_BL_STATUS] & ~BL_STATUS_REV_MASK;
bl_error = status[REG_BL_ERROR] & ~BL_ERROR_RESERVED;
if (bl_status & BL_STATUS_BUSY)
ret = -ETIMEDOUT;
else if (bl_status != BL_STATUS_RUNNING ||
bl_error != BL_ERROR_BOOTLOADING)
ret = -EIO;
else
ret = 0;
return ret;
}
static int cyapa_gen3_write_blocks(struct cyapa *cyapa,
size_t start_block, size_t block_count,
const u8 *image_data)
{
int error;
int i;
for (i = 0; i < block_count; i++) {
size_t block = start_block + i;
size_t addr = i * CYAPA_FW_BLOCK_SIZE;
const u8 *data = &image_data[addr];
error = cyapa_gen3_write_fw_block(cyapa, block, data);
if (error)
return error;
}
return 0;
}
static int cyapa_gen3_do_fw_update(struct cyapa *cyapa,
const struct firmware *fw)
{
struct device *dev = &cyapa->client->dev;
int error;
/* First write data, starting at byte 128 of fw->data */
error = cyapa_gen3_write_blocks(cyapa,
CYAPA_FW_DATA_BLOCK_START, CYAPA_FW_DATA_BLOCK_COUNT,
&fw->data[CYAPA_FW_HDR_BLOCK_COUNT * CYAPA_FW_BLOCK_SIZE]);
if (error) {
dev_err(dev, "FW update aborted, write image: %d\n", error);
return error;
}
/* Then write checksum */
error = cyapa_gen3_write_blocks(cyapa,
CYAPA_FW_HDR_BLOCK_START, CYAPA_FW_HDR_BLOCK_COUNT,
&fw->data[0]);
if (error) {
dev_err(dev, "FW update aborted, write checksum: %d\n", error);
return error;
}
return 0;
}
static ssize_t cyapa_gen3_do_calibrate(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct cyapa *cyapa = dev_get_drvdata(dev);
int tries;
int ret;
ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
if (ret < 0) {
dev_err(dev, "Error reading dev status: %d\n", ret);
goto out;
}
if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) {
dev_warn(dev, "Trackpad device is busy, device state: 0x%02x\n",
ret);
ret = -EAGAIN;
goto out;
}
ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET,
OP_RECALIBRATION_MASK);
if (ret < 0) {
dev_err(dev, "Failed to send calibrate command: %d\n",
ret);
goto out;
}
tries = 20; /* max recalibration timeout 2s. */
do {
/*
* For this recalibration, the max time will not exceed 2s.
* The average time is approximately 500 - 700 ms, and we
* will check the status every 100 - 200ms.
*/
usleep_range(100000, 200000);
ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
if (ret < 0) {
dev_err(dev, "Error reading dev status: %d\n",
ret);
goto out;
}
if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL)
break;
} while (--tries);
if (tries == 0) {
dev_err(dev, "Failed to calibrate. Timeout.\n");
ret = -ETIMEDOUT;
goto out;
}
dev_dbg(dev, "Calibration successful.\n");
out:
return ret < 0 ? ret : count;
}
static ssize_t cyapa_gen3_show_baseline(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct cyapa *cyapa = dev_get_drvdata(dev);
int max_baseline, min_baseline;
int tries;
int ret;
ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
if (ret < 0) {
dev_err(dev, "Error reading dev status. err = %d\n", ret);
goto out;
}
if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) {
dev_warn(dev, "Trackpad device is busy. device state = 0x%x\n",
ret);
ret = -EAGAIN;
goto out;
}
ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET,
OP_REPORT_BASELINE_MASK);
if (ret < 0) {
dev_err(dev, "Failed to send report baseline command. %d\n",
ret);
goto out;
}
tries = 3; /* Try for 30 to 60 ms */
do {
usleep_range(10000, 20000);
ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
if (ret < 0) {
dev_err(dev, "Error reading dev status. err = %d\n",
ret);
goto out;
}
if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL)
break;
} while (--tries);
if (tries == 0) {
dev_err(dev, "Device timed out going to Normal state.\n");
ret = -ETIMEDOUT;
goto out;
}
ret = cyapa_read_byte(cyapa, CYAPA_CMD_MAX_BASELINE);
if (ret < 0) {
dev_err(dev, "Failed to read max baseline. err = %d\n", ret);
goto out;
}
max_baseline = ret;
ret = cyapa_read_byte(cyapa, CYAPA_CMD_MIN_BASELINE);
if (ret < 0) {
dev_err(dev, "Failed to read min baseline. err = %d\n", ret);
goto out;
}
min_baseline = ret;
dev_dbg(dev, "Baseline report successful. Max: %d Min: %d\n",
max_baseline, min_baseline);
ret = scnprintf(buf, PAGE_SIZE, "%d %d\n", max_baseline, min_baseline);
out:
return ret;
}
/*
* cyapa_get_wait_time_for_pwr_cmd
*
* Compute the amount of time we need to wait after updating the touchpad
* power mode. The touchpad needs to consume the incoming power mode set
* command at the current clock rate.
*/
static u16 cyapa_get_wait_time_for_pwr_cmd(u8 pwr_mode)
{
switch (pwr_mode) {
case PWR_MODE_FULL_ACTIVE: return 20;
case PWR_MODE_BTN_ONLY: return 20;
case PWR_MODE_OFF: return 20;
default: return cyapa_pwr_cmd_to_sleep_time(pwr_mode) + 50;
}
}
/*
* Set device power mode
*
* Write to the field to configure power state. Power states include :
* Full : Max scans and report rate.
* Idle : Report rate set by user specified time.
* ButtonOnly : No scans for fingers. When the button is triggered,
* a slave interrupt is asserted to notify host to wake up.
* Off : Only awake for i2c commands from host. No function for button
* or touch sensors.
*
* The power_mode command should conform to the following :
* Full : 0x3f
* Idle : Configurable from 20 to 1000ms. See note below for
* cyapa_sleep_time_to_pwr_cmd and cyapa_pwr_cmd_to_sleep_time
* ButtonOnly : 0x01
* Off : 0x00
*
* Device power mode can only be set when device is in operational mode.
*/
static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode,
u16 always_unused, enum cyapa_pm_stage pm_stage)
{
struct input_dev *input = cyapa->input;
u8 power;
int tries;
int sleep_time;
int interval;
int ret;
if (cyapa->state != CYAPA_STATE_OP)
return 0;
tries = SET_POWER_MODE_TRIES;
while (tries--) {
ret = cyapa_read_byte(cyapa, CYAPA_CMD_POWER_MODE);
if (ret >= 0)
break;
usleep_range(SET_POWER_MODE_DELAY, 2 * SET_POWER_MODE_DELAY);
}
if (ret < 0)
return ret;
/*
* Return early if the power mode to set is the same as the current
* one.
*/
if ((ret & PWR_MODE_MASK) == power_mode)
return 0;
sleep_time = (int)cyapa_get_wait_time_for_pwr_cmd(ret & PWR_MODE_MASK);
power = ret;
power &= ~PWR_MODE_MASK;
power |= power_mode & PWR_MODE_MASK;
tries = SET_POWER_MODE_TRIES;
while (tries--) {
ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power);
if (!ret)
break;
usleep_range(SET_POWER_MODE_DELAY, 2 * SET_POWER_MODE_DELAY);
}
/*
* Wait for the newly set power command to go in at the previous
* clock speed (scanrate) used by the touchpad firmware. Not
* doing so before issuing the next command may result in errors
* depending on the command's content.
*/
if (cyapa->operational && input && input->users &&
(pm_stage == CYAPA_PM_RUNTIME_SUSPEND ||
pm_stage == CYAPA_PM_RUNTIME_RESUME)) {
/* Try to polling in 120Hz, read may fail, just ignore it. */
interval = 1000 / 120;
while (sleep_time > 0) {
if (sleep_time > interval)
msleep(interval);
else
msleep(sleep_time);
sleep_time -= interval;
cyapa_gen3_try_poll_handler(cyapa);
}
} else {
msleep(sleep_time);
}
return ret;
}
static int cyapa_gen3_set_proximity(struct cyapa *cyapa, bool enable)
{
return -EOPNOTSUPP;
}
static int cyapa_gen3_get_query_data(struct cyapa *cyapa)
{
u8 query_data[QUERY_DATA_SIZE];
int ret;
if (cyapa->state != CYAPA_STATE_OP)
return -EBUSY;
ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_QUERY, query_data);
if (ret != QUERY_DATA_SIZE)
return (ret < 0) ? ret : -EIO;
memcpy(&cyapa->product_id[0], &query_data[0], 5);
cyapa->product_id[5] = '-';
memcpy(&cyapa->product_id[6], &query_data[5], 6);
cyapa->product_id[12] = '-';
memcpy(&cyapa->product_id[13], &query_data[11], 2);
cyapa->product_id[15] = '\0';
cyapa->fw_maj_ver = query_data[15];
cyapa->fw_min_ver = query_data[16];
cyapa->btn_capability = query_data[19] & CAPABILITY_BTN_MASK;
cyapa->gen = query_data[20] & 0x0f;
cyapa->max_abs_x = ((query_data[21] & 0xf0) << 4) | query_data[22];
cyapa->max_abs_y = ((query_data[21] & 0x0f) << 8) | query_data[23];
cyapa->physical_size_x =
((query_data[24] & 0xf0) << 4) | query_data[25];
cyapa->physical_size_y =
((query_data[24] & 0x0f) << 8) | query_data[26];
cyapa->max_z = 255;
return 0;
}
static int cyapa_gen3_bl_query_data(struct cyapa *cyapa)
{
u8 bl_data[CYAPA_CMD_LEN];
int ret;
ret = cyapa_i2c_reg_read_block(cyapa, 0, CYAPA_CMD_LEN, bl_data);
if (ret != CYAPA_CMD_LEN)
return (ret < 0) ? ret : -EIO;
/*
* This value will be updated again when entered application mode.
* If TP failed to enter application mode, this fw version values
* can be used as a reference.
* This firmware version valid when fw image checksum is valid.
*/
if (bl_data[REG_BL_STATUS] ==
(BL_STATUS_RUNNING | BL_STATUS_CSUM_VALID)) {
cyapa->fw_maj_ver = bl_data[GEN3_BL_IDLE_FW_MAJ_VER_OFFSET];
cyapa->fw_min_ver = bl_data[GEN3_BL_IDLE_FW_MIN_VER_OFFSET];
}
return 0;
}
/*
* Check if device is operational.
*
* An operational device is responding, has exited bootloader, and has
* firmware supported by this driver.
*
* Returns:
* -EBUSY no device or in bootloader
* -EIO failure while reading from device
* -EAGAIN device is still in bootloader
* if ->state = CYAPA_STATE_BL_IDLE, device has invalid firmware
* -EINVAL device is in operational mode, but not supported by this driver
* 0 device is supported
*/
static int cyapa_gen3_do_operational_check(struct cyapa *cyapa)
{
struct device *dev = &cyapa->client->dev;
int error;
switch (cyapa->state) {
case CYAPA_STATE_BL_ACTIVE:
error = cyapa_gen3_bl_deactivate(cyapa);
if (error) {
dev_err(dev, "failed to bl_deactivate: %d\n", error);
return error;
}
/* Fallthrough state */
case CYAPA_STATE_BL_IDLE:
/* Try to get firmware version in bootloader mode. */
cyapa_gen3_bl_query_data(cyapa);
error = cyapa_gen3_bl_exit(cyapa);
if (error) {
dev_err(dev, "failed to bl_exit: %d\n", error);
return error;
}
/* Fallthrough state */
case CYAPA_STATE_OP:
/*
* Reading query data before going back to the full mode
* may cause problems, so we set the power mode first here.
*/
error = cyapa_gen3_set_power_mode(cyapa,
PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_ACTIVE);
if (error)
dev_err(dev, "%s: set full power mode failed: %d\n",
__func__, error);
error = cyapa_gen3_get_query_data(cyapa);
if (error < 0)
return error;
/* Only support firmware protocol gen3 */
if (cyapa->gen != CYAPA_GEN3) {
dev_err(dev, "unsupported protocol version (%d)",
cyapa->gen);
return -EINVAL;
}
/* Only support product ID starting with CYTRA */
if (memcmp(cyapa->product_id, product_id,
strlen(product_id)) != 0) {
dev_err(dev, "unsupported product ID (%s)\n",
cyapa->product_id);
return -EINVAL;
}
return 0;
default:
return -EIO;
}
return 0;
}
/*
* Return false, do not continue process
* Return true, continue process.
*/
static bool cyapa_gen3_irq_cmd_handler(struct cyapa *cyapa)
{
/* Not gen3 irq command response, skip for continue. */
if (cyapa->gen != CYAPA_GEN3)
return true;
if (cyapa->operational)
return true;
/*
* Driver in detecting or other interface function processing,
* so, stop cyapa_gen3_irq_handler to continue process to
* avoid unwanted to error detecting and processing.
*
* And also, avoid the periodically asserted interrupts to be processed
* as touch inputs when gen3 failed to launch into application mode,
* which will cause gen3 stays in bootloader mode.
*/
return false;
}
static int cyapa_gen3_event_process(struct cyapa *cyapa,
struct cyapa_reg_data *data)
{
struct input_dev *input = cyapa->input;
int num_fingers;
int i;
num_fingers = (data->finger_btn >> 4) & 0x0f;
for (i = 0; i < num_fingers; i++) {
const struct cyapa_touch *touch = &data->touches[i];
/* Note: touch->id range is 1 to 15; slots are 0 to 14. */
int slot = touch->id - 1;
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
input_report_abs(input, ABS_MT_POSITION_X,
((touch->xy_hi & 0xf0) << 4) | touch->x_lo);
input_report_abs(input, ABS_MT_POSITION_Y,
((touch->xy_hi & 0x0f) << 8) | touch->y_lo);
input_report_abs(input, ABS_MT_PRESSURE, touch->pressure);
}
input_mt_sync_frame(input);
if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK)
input_report_key(input, BTN_LEFT,
!!(data->finger_btn & OP_DATA_LEFT_BTN));
if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK)
input_report_key(input, BTN_MIDDLE,
!!(data->finger_btn & OP_DATA_MIDDLE_BTN));
if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK)
input_report_key(input, BTN_RIGHT,
!!(data->finger_btn & OP_DATA_RIGHT_BTN));
input_sync(input);
return 0;
}
static int cyapa_gen3_irq_handler(struct cyapa *cyapa)
{
struct device *dev = &cyapa->client->dev;
struct cyapa_reg_data data;
int ret;
ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data);
if (ret != sizeof(data)) {
dev_err(dev, "failed to read report data, (%d)\n", ret);
return -EINVAL;
}
if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC ||
(data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL ||
(data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) {
dev_err(dev, "invalid device state bytes: %02x %02x\n",
data.device_status, data.finger_btn);
return -EINVAL;
}
return cyapa_gen3_event_process(cyapa, &data);
}
/*
* This function will be called in the cyapa_gen3_set_power_mode function,
* and it's known that it may failed in some situation after the set power
* mode command was sent. So this function is aimed to avoid the knwon
* and unwanted output I2C and data parse error messages.
*/
static int cyapa_gen3_try_poll_handler(struct cyapa *cyapa)
{
struct cyapa_reg_data data;
int ret;
ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data);
if (ret != sizeof(data))
return -EINVAL;
if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC ||
(data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL ||
(data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID)
return -EINVAL;
return cyapa_gen3_event_process(cyapa, &data);
}
static int cyapa_gen3_initialize(struct cyapa *cyapa) { return 0; }
static int cyapa_gen3_bl_initiate(struct cyapa *cyapa,
const struct firmware *fw) { return 0; }
static int cyapa_gen3_empty_output_data(struct cyapa *cyapa,
u8 *buf, int *len, cb_sort func) { return 0; }
const struct cyapa_dev_ops cyapa_gen3_ops = {
.check_fw = cyapa_gen3_check_fw,
.bl_enter = cyapa_gen3_bl_enter,
.bl_activate = cyapa_gen3_bl_activate,
.update_fw = cyapa_gen3_do_fw_update,
.bl_deactivate = cyapa_gen3_bl_deactivate,
.bl_initiate = cyapa_gen3_bl_initiate,
.show_baseline = cyapa_gen3_show_baseline,
.calibrate_store = cyapa_gen3_do_calibrate,
.initialize = cyapa_gen3_initialize,
.state_parse = cyapa_gen3_state_parse,
.operational_check = cyapa_gen3_do_operational_check,
.irq_handler = cyapa_gen3_irq_handler,
.irq_cmd_handler = cyapa_gen3_irq_cmd_handler,
.sort_empty_output_data = cyapa_gen3_empty_output_data,
.set_power_mode = cyapa_gen3_set_power_mode,
.set_proximity = cyapa_gen3_set_proximity,
};