linux-stable/include/linux/spi/ads7846.h
Igor Grinberg c4f4925439 Input: ads7846 - enable pendown GPIO debounce time setting
Some platforms need the pendown GPIO debounce time setting programmed.
Since the pendown GPIO is handled by the driver, the debounce time
should also be handled along with the pendown GPIO request.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21 13:09:56 -08:00

61 lines
2 KiB
C

/* linux/spi/ads7846.h */
/* Touchscreen characteristics vary between boards and models. The
* platform_data for the device's "struct device" holds this information.
*
* It's OK if the min/max values are zero.
*/
enum ads7846_filter {
ADS7846_FILTER_OK,
ADS7846_FILTER_REPEAT,
ADS7846_FILTER_IGNORE,
};
struct ads7846_platform_data {
u16 model; /* 7843, 7845, 7846, 7873. */
u16 vref_delay_usecs; /* 0 for external vref; etc */
u16 vref_mv; /* external vref value, milliVolts
* ads7846: if 0, use internal vref */
bool keep_vref_on; /* set to keep vref on for differential
* measurements as well */
bool swap_xy; /* swap x and y axes */
/* Settling time of the analog signals; a function of Vcc and the
* capacitance on the X/Y drivers. If set to non-zero, two samples
* are taken with settle_delay us apart, and the second one is used.
* ~150 uSec with 0.01uF caps.
*/
u16 settle_delay_usecs;
/* If set to non-zero, after samples are taken this delay is applied
* and penirq is rechecked, to help avoid false events. This value
* is affected by the material used to build the touch layer.
*/
u16 penirq_recheck_delay_usecs;
u16 x_plate_ohms;
u16 y_plate_ohms;
u16 x_min, x_max;
u16 y_min, y_max;
u16 pressure_min, pressure_max;
u16 debounce_max; /* max number of additional readings
* per sample */
u16 debounce_tol; /* tolerance used for filtering */
u16 debounce_rep; /* additional consecutive good readings
* required after the first two */
int gpio_pendown; /* the GPIO used to decide the pendown
* state if get_pendown_state == NULL */
int gpio_pendown_debounce; /* platform specific debounce time for
* the gpio_pendown */
int (*get_pendown_state)(void);
int (*filter_init) (const struct ads7846_platform_data *pdata,
void **filter_data);
int (*filter) (void *filter_data, int data_idx, int *val);
void (*filter_cleanup)(void *filter_data);
void (*wait_for_sync)(void);
bool wakeup;
unsigned long irq_flags;
};