mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-29 05:44:11 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/usb/misc/usb251xb.c
Rob Herring 484468fb0f usb: Explicitly include correct DT includes 
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25 18:20:02 +02:00

756 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Microchip USB251xB USB 2.0 Hi-Speed Hub Controller
* Configuration via SMBus.
*
* Copyright (c) 2017 SKIDATA AG
*
* This work is based on the USB3503 driver by Dongjin Kim and
* a not-accepted patch by Fabien Lahoudere, see:
* https://patchwork.kernel.org/patch/9257715/
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/nls.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
/* Internal Register Set Addresses & Default Values acc. to DS00001692C */
#define USB251XB_ADDR_VENDOR_ID_LSB 0x00
#define USB251XB_ADDR_VENDOR_ID_MSB 0x01
#define USB251XB_DEF_VENDOR_ID 0x0424
#define USB251XB_ADDR_PRODUCT_ID_LSB 0x02
#define USB251XB_ADDR_PRODUCT_ID_MSB 0x03
#define USB251XB_ADDR_DEVICE_ID_LSB 0x04
#define USB251XB_ADDR_DEVICE_ID_MSB 0x05
#define USB251XB_DEF_DEVICE_ID 0x0BB3
#define USB251XB_ADDR_CONFIG_DATA_1 0x06
#define USB251XB_DEF_CONFIG_DATA_1 0x9B
#define USB251XB_ADDR_CONFIG_DATA_2 0x07
#define USB251XB_DEF_CONFIG_DATA_2 0x20
#define USB251XB_ADDR_CONFIG_DATA_3 0x08
#define USB251XB_DEF_CONFIG_DATA_3 0x02
#define USB251XB_ADDR_NON_REMOVABLE_DEVICES 0x09
#define USB251XB_DEF_NON_REMOVABLE_DEVICES 0x00
#define USB251XB_ADDR_PORT_DISABLE_SELF 0x0A
#define USB251XB_DEF_PORT_DISABLE_SELF 0x00
#define USB251XB_ADDR_PORT_DISABLE_BUS 0x0B
#define USB251XB_DEF_PORT_DISABLE_BUS 0x00
#define USB251XB_ADDR_MAX_POWER_SELF 0x0C
#define USB251XB_DEF_MAX_POWER_SELF 0x01
#define USB251XB_ADDR_MAX_POWER_BUS 0x0D
#define USB251XB_DEF_MAX_POWER_BUS 0x32
#define USB251XB_ADDR_MAX_CURRENT_SELF 0x0E
#define USB251XB_DEF_MAX_CURRENT_SELF 0x01
#define USB251XB_ADDR_MAX_CURRENT_BUS 0x0F
#define USB251XB_DEF_MAX_CURRENT_BUS 0x32
#define USB251XB_ADDR_POWER_ON_TIME 0x10
#define USB251XB_DEF_POWER_ON_TIME 0x32
#define USB251XB_ADDR_LANGUAGE_ID_HIGH 0x11
#define USB251XB_ADDR_LANGUAGE_ID_LOW 0x12
#define USB251XB_DEF_LANGUAGE_ID 0x0000
#define USB251XB_STRING_BUFSIZE 62
#define USB251XB_ADDR_MANUFACTURER_STRING_LEN 0x13
#define USB251XB_ADDR_MANUFACTURER_STRING 0x16
#define USB251XB_DEF_MANUFACTURER_STRING "Microchip"
#define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14
#define USB251XB_ADDR_PRODUCT_STRING 0x54
#define USB251XB_ADDR_SERIAL_STRING_LEN 0x15
#define USB251XB_ADDR_SERIAL_STRING 0x92
#define USB251XB_DEF_SERIAL_STRING ""
#define USB251XB_ADDR_BATTERY_CHARGING_ENABLE 0xD0
#define USB251XB_DEF_BATTERY_CHARGING_ENABLE 0x00
#define USB251XB_ADDR_BOOST_UP 0xF6
#define USB251XB_DEF_BOOST_UP 0x00
#define USB251XB_ADDR_BOOST_57 0xF7
#define USB251XB_DEF_BOOST_57 0x00
#define USB251XB_ADDR_BOOST_14 0xF8
#define USB251XB_DEF_BOOST_14 0x00
#define USB251XB_ADDR_PORT_SWAP 0xFA
#define USB251XB_DEF_PORT_SWAP 0x00
#define USB251XB_ADDR_PORT_MAP_12 0xFB
#define USB251XB_DEF_PORT_MAP_12 0x00
#define USB251XB_ADDR_PORT_MAP_34 0xFC
#define USB251XB_DEF_PORT_MAP_34 0x00 /* USB251{3B/i,4B/i,7/i} only */
#define USB251XB_ADDR_PORT_MAP_56 0xFD
#define USB251XB_DEF_PORT_MAP_56 0x00 /* USB2517/i only */
#define USB251XB_ADDR_PORT_MAP_7 0xFE
#define USB251XB_DEF_PORT_MAP_7 0x00 /* USB2517/i only */
#define USB251XB_ADDR_STATUS_COMMAND 0xFF
#define USB251XB_STATUS_COMMAND_SMBUS_DOWN 0x04
#define USB251XB_STATUS_COMMAND_RESET 0x02
#define USB251XB_STATUS_COMMAND_ATTACH 0x01
#define USB251XB_I2C_REG_SZ 0x100
#define USB251XB_I2C_WRITE_SZ 0x10
#define DRIVER_NAME "usb251xb"
#define DRIVER_DESC "Microchip USB 2.0 Hi-Speed Hub Controller"
struct usb251xb {
struct device *dev;
struct i2c_client *i2c;
struct regulator *vdd;
u8 skip_config;
struct gpio_desc *gpio_reset;
u16 vendor_id;
u16 product_id;
u16 device_id;
u8 conf_data1;
u8 conf_data2;
u8 conf_data3;
u8 non_rem_dev;
u8 port_disable_sp;
u8 port_disable_bp;
u8 max_power_sp;
u8 max_power_bp;
u8 max_current_sp;
u8 max_current_bp;
u8 power_on_time;
u16 lang_id;
u8 manufacturer_len;
u8 product_len;
u8 serial_len;
char manufacturer[USB251XB_STRING_BUFSIZE];
char product[USB251XB_STRING_BUFSIZE];
char serial[USB251XB_STRING_BUFSIZE];
u8 bat_charge_en;
u8 boost_up;
u8 boost_57;
u8 boost_14;
u8 port_swap;
u8 port_map12;
u8 port_map34;
u8 port_map56;
u8 port_map7;
u8 status;
};
struct usb251xb_data {
u16 product_id;
u8 port_cnt;
bool led_support;
bool bat_support;
char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */
};
static const struct usb251xb_data usb2422_data = {
.product_id = 0x2422,
.port_cnt = 2,
.led_support = false,
.bat_support = true,
.product_str = "USB2422",
};
static const struct usb251xb_data usb2512b_data = {
.product_id = 0x2512,
.port_cnt = 2,
.led_support = false,
.bat_support = true,
.product_str = "USB2512B",
};
static const struct usb251xb_data usb2512bi_data = {
.product_id = 0x2512,
.port_cnt = 2,
.led_support = false,
.bat_support = true,
.product_str = "USB2512Bi",
};
static const struct usb251xb_data usb2513b_data = {
.product_id = 0x2513,
.port_cnt = 3,
.led_support = false,
.bat_support = true,
.product_str = "USB2513B",
};
static const struct usb251xb_data usb2513bi_data = {
.product_id = 0x2513,
.port_cnt = 3,
.led_support = false,
.bat_support = true,
.product_str = "USB2513Bi",
};
static const struct usb251xb_data usb2514b_data = {
.product_id = 0x2514,
.port_cnt = 4,
.led_support = false,
.bat_support = true,
.product_str = "USB2514B",
};
static const struct usb251xb_data usb2514bi_data = {
.product_id = 0x2514,
.port_cnt = 4,
.led_support = false,
.bat_support = true,
.product_str = "USB2514Bi",
};
static const struct usb251xb_data usb2517_data = {
.product_id = 0x2517,
.port_cnt = 7,
.led_support = true,
.bat_support = false,
.product_str = "USB2517",
};
static const struct usb251xb_data usb2517i_data = {
.product_id = 0x2517,
.port_cnt = 7,
.led_support = true,
.bat_support = false,
.product_str = "USB2517i",
};
#ifdef CONFIG_GPIOLIB
static int usb251xb_check_dev_children(struct device *dev, void *child)
{
if (dev->type == &i2c_adapter_type) {
return device_for_each_child(dev, child,
usb251xb_check_dev_children);
}
return (dev == child);
}
static int usb251x_check_gpio_chip(struct usb251xb *hub)
{
struct gpio_chip *gc = gpiod_to_chip(hub->gpio_reset);
struct i2c_adapter *adap = hub->i2c->adapter;
int ret;
if (!hub->gpio_reset)
return 0;
if (!gc)
return -EINVAL;
ret = usb251xb_check_dev_children(&adap->dev, gc->parent);
if (ret) {
dev_err(hub->dev, "Reset GPIO chip is at the same i2c-bus\n");
return -EINVAL;
}
return 0;
}
#else
static int usb251x_check_gpio_chip(struct usb251xb *hub)
{
return 0;
}
#endif
static void usb251xb_reset(struct usb251xb *hub)
{
if (!hub->gpio_reset)
return;
i2c_lock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT);
gpiod_set_value_cansleep(hub->gpio_reset, 1);
usleep_range(1, 10); /* >=1us RESET_N asserted */
gpiod_set_value_cansleep(hub->gpio_reset, 0);
/* wait for hub recovery/stabilization */
usleep_range(500, 750); /* >=500us after RESET_N deasserted */
i2c_unlock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT);
}
static int usb251xb_connect(struct usb251xb *hub)
{
struct device *dev = hub->dev;
int err, i;
char i2c_wb[USB251XB_I2C_REG_SZ];
memset(i2c_wb, 0, USB251XB_I2C_REG_SZ);
if (hub->skip_config) {
dev_info(dev, "Skip hub configuration, only attach.\n");
i2c_wb[0] = 0x01;
i2c_wb[1] = USB251XB_STATUS_COMMAND_ATTACH;
usb251xb_reset(hub);
err = i2c_smbus_write_i2c_block_data(hub->i2c,
USB251XB_ADDR_STATUS_COMMAND, 2, i2c_wb);
if (err) {
dev_err(dev, "attaching hub failed: %d\n", err);
return err;
}
return 0;
}
i2c_wb[USB251XB_ADDR_VENDOR_ID_MSB] = (hub->vendor_id >> 8) & 0xFF;
i2c_wb[USB251XB_ADDR_VENDOR_ID_LSB] = hub->vendor_id & 0xFF;
i2c_wb[USB251XB_ADDR_PRODUCT_ID_MSB] = (hub->product_id >> 8) & 0xFF;
i2c_wb[USB251XB_ADDR_PRODUCT_ID_LSB] = hub->product_id & 0xFF;
i2c_wb[USB251XB_ADDR_DEVICE_ID_MSB] = (hub->device_id >> 8) & 0xFF;
i2c_wb[USB251XB_ADDR_DEVICE_ID_LSB] = hub->device_id & 0xFF;
i2c_wb[USB251XB_ADDR_CONFIG_DATA_1] = hub->conf_data1;
i2c_wb[USB251XB_ADDR_CONFIG_DATA_2] = hub->conf_data2;
i2c_wb[USB251XB_ADDR_CONFIG_DATA_3] = hub->conf_data3;
i2c_wb[USB251XB_ADDR_NON_REMOVABLE_DEVICES] = hub->non_rem_dev;
i2c_wb[USB251XB_ADDR_PORT_DISABLE_SELF] = hub->port_disable_sp;
i2c_wb[USB251XB_ADDR_PORT_DISABLE_BUS] = hub->port_disable_bp;
i2c_wb[USB251XB_ADDR_MAX_POWER_SELF] = hub->max_power_sp;
i2c_wb[USB251XB_ADDR_MAX_POWER_BUS] = hub->max_power_bp;
i2c_wb[USB251XB_ADDR_MAX_CURRENT_SELF] = hub->max_current_sp;
i2c_wb[USB251XB_ADDR_MAX_CURRENT_BUS] = hub->max_current_bp;
i2c_wb[USB251XB_ADDR_POWER_ON_TIME] = hub->power_on_time;
i2c_wb[USB251XB_ADDR_LANGUAGE_ID_HIGH] = (hub->lang_id >> 8) & 0xFF;
i2c_wb[USB251XB_ADDR_LANGUAGE_ID_LOW] = hub->lang_id & 0xFF;
i2c_wb[USB251XB_ADDR_MANUFACTURER_STRING_LEN] = hub->manufacturer_len;
i2c_wb[USB251XB_ADDR_PRODUCT_STRING_LEN] = hub->product_len;
i2c_wb[USB251XB_ADDR_SERIAL_STRING_LEN] = hub->serial_len;
memcpy(&i2c_wb[USB251XB_ADDR_MANUFACTURER_STRING], hub->manufacturer,
USB251XB_STRING_BUFSIZE);
memcpy(&i2c_wb[USB251XB_ADDR_SERIAL_STRING], hub->serial,
USB251XB_STRING_BUFSIZE);
memcpy(&i2c_wb[USB251XB_ADDR_PRODUCT_STRING], hub->product,
USB251XB_STRING_BUFSIZE);
i2c_wb[USB251XB_ADDR_BATTERY_CHARGING_ENABLE] = hub->bat_charge_en;
i2c_wb[USB251XB_ADDR_BOOST_UP] = hub->boost_up;
i2c_wb[USB251XB_ADDR_BOOST_57] = hub->boost_57;
i2c_wb[USB251XB_ADDR_BOOST_14] = hub->boost_14;
i2c_wb[USB251XB_ADDR_PORT_SWAP] = hub->port_swap;
i2c_wb[USB251XB_ADDR_PORT_MAP_12] = hub->port_map12;
i2c_wb[USB251XB_ADDR_PORT_MAP_34] = hub->port_map34;
i2c_wb[USB251XB_ADDR_PORT_MAP_56] = hub->port_map56;
i2c_wb[USB251XB_ADDR_PORT_MAP_7] = hub->port_map7;
i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH;
usb251xb_reset(hub);
/* write registers */
for (i = 0; i < (USB251XB_I2C_REG_SZ / USB251XB_I2C_WRITE_SZ); i++) {
int offset = i * USB251XB_I2C_WRITE_SZ;
char wbuf[USB251XB_I2C_WRITE_SZ + 1];
/* The first data byte transferred tells the hub how many data
* bytes will follow (byte count).
*/
wbuf[0] = USB251XB_I2C_WRITE_SZ;
memcpy(&wbuf[1], &i2c_wb[offset], USB251XB_I2C_WRITE_SZ);
dev_dbg(dev, "writing %d byte block %d to 0x%02X\n",
USB251XB_I2C_WRITE_SZ, i, offset);
err = i2c_smbus_write_i2c_block_data(hub->i2c, offset,
USB251XB_I2C_WRITE_SZ + 1,
wbuf);
if (err)
goto out_err;
}
dev_info(dev, "Hub configuration was successful.\n");
return 0;
out_err:
dev_err(dev, "configuring block %d failed: %d\n", i, err);
return err;
}
static void usb251xb_get_ports_field(struct usb251xb *hub,
const char *prop_name, u8 port_cnt,
bool ds_only, u8 *fld)
{
struct device *dev = hub->dev;
struct property *prop;
const __be32 *p;
u32 port;
of_property_for_each_u32(dev->of_node, prop_name, prop, p, port) {
if ((port >= ds_only ? 1 : 0) && (port <= port_cnt))
*fld |= BIT(port);
else
dev_warn(dev, "port %u doesn't exist\n", port);
}
}
static int usb251xb_get_ofdata(struct usb251xb *hub,
const struct usb251xb_data *data)
{
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
int len;
u32 property_u32 = 0;
const char *cproperty_char;
char str[USB251XB_STRING_BUFSIZE / 2];
if (!np) {
dev_err(dev, "failed to get ofdata\n");
return -ENODEV;
}
hub->skip_config = of_property_read_bool(np, "skip-config");
hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(hub->gpio_reset))
return dev_err_probe(dev, PTR_ERR(hub->gpio_reset),
"unable to request GPIO reset pin\n");
if (of_property_read_u16(np, "vendor-id", &hub->vendor_id))
hub->vendor_id = USB251XB_DEF_VENDOR_ID;
if (of_property_read_u16(np, "product-id", &hub->product_id))
hub->product_id = data->product_id;
if (of_property_read_u16(np, "device-id", &hub->device_id))
hub->device_id = USB251XB_DEF_DEVICE_ID;
hub->conf_data1 = USB251XB_DEF_CONFIG_DATA_1;
if (of_property_read_bool(np, "self-powered")) {
hub->conf_data1 |= BIT(7);
/* Configure Over-Current sens when self-powered */
hub->conf_data1 &= ~BIT(2);
if (of_property_read_bool(np, "ganged-sensing"))
hub->conf_data1 &= ~BIT(1);
else if (of_property_read_bool(np, "individual-sensing"))
hub->conf_data1 |= BIT(1);
} else if (of_property_read_bool(np, "bus-powered")) {
hub->conf_data1 &= ~BIT(7);
/* Disable Over-Current sense when bus-powered */
hub->conf_data1 |= BIT(2);
}
if (of_property_read_bool(np, "disable-hi-speed"))
hub->conf_data1 |= BIT(5);
if (of_property_read_bool(np, "multi-tt"))
hub->conf_data1 |= BIT(4);
else if (of_property_read_bool(np, "single-tt"))
hub->conf_data1 &= ~BIT(4);
if (of_property_read_bool(np, "disable-eop"))
hub->conf_data1 |= BIT(3);
if (of_property_read_bool(np, "individual-port-switching"))
hub->conf_data1 |= BIT(0);
else if (of_property_read_bool(np, "ganged-port-switching"))
hub->conf_data1 &= ~BIT(0);
hub->conf_data2 = USB251XB_DEF_CONFIG_DATA_2;
if (of_property_read_bool(np, "dynamic-power-switching"))
hub->conf_data2 |= BIT(7);
if (!of_property_read_u32(np, "oc-delay-us", &property_u32)) {
if (property_u32 == 100) {
/* 100 us*/
hub->conf_data2 &= ~BIT(5);
hub->conf_data2 &= ~BIT(4);
} else if (property_u32 == 4000) {
/* 4 ms */
hub->conf_data2 &= ~BIT(5);
hub->conf_data2 |= BIT(4);
} else if (property_u32 == 16000) {
/* 16 ms */
hub->conf_data2 |= BIT(5);
hub->conf_data2 |= BIT(4);
} else {
/* 8 ms (DEFAULT) */
hub->conf_data2 |= BIT(5);
hub->conf_data2 &= ~BIT(4);
}
}
if (of_property_read_bool(np, "compound-device"))
hub->conf_data2 |= BIT(3);
hub->conf_data3 = USB251XB_DEF_CONFIG_DATA_3;
if (of_property_read_bool(np, "port-mapping-mode"))
hub->conf_data3 |= BIT(3);
if (data->led_support && of_get_property(np, "led-usb-mode", NULL))
hub->conf_data3 &= ~BIT(1);
if (of_property_read_bool(np, "string-support"))
hub->conf_data3 |= BIT(0);
hub->non_rem_dev = USB251XB_DEF_NON_REMOVABLE_DEVICES;
usb251xb_get_ports_field(hub, "non-removable-ports", data->port_cnt,
true, &hub->non_rem_dev);
hub->port_disable_sp = USB251XB_DEF_PORT_DISABLE_SELF;
usb251xb_get_ports_field(hub, "sp-disabled-ports", data->port_cnt,
true, &hub->port_disable_sp);
hub->port_disable_bp = USB251XB_DEF_PORT_DISABLE_BUS;
usb251xb_get_ports_field(hub, "bp-disabled-ports", data->port_cnt,
true, &hub->port_disable_bp);
hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
if (!of_property_read_u32(np, "sp-max-total-current-microamp",
&property_u32))
hub->max_power_sp = min_t(u8, property_u32 / 2000, 50);
hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
if (!of_property_read_u32(np, "bp-max-total-current-microamp",
&property_u32))
hub->max_power_bp = min_t(u8, property_u32 / 2000, 255);
hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
if (!of_property_read_u32(np, "sp-max-removable-current-microamp",
&property_u32))
hub->max_current_sp = min_t(u8, property_u32 / 2000, 50);
hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
if (!of_property_read_u32(np, "bp-max-removable-current-microamp",
&property_u32))
hub->max_current_bp = min_t(u8, property_u32 / 2000, 255);
hub->power_on_time = USB251XB_DEF_POWER_ON_TIME;
if (!of_property_read_u32(np, "power-on-time-ms", &property_u32))
hub->power_on_time = min_t(u8, property_u32 / 2, 255);
if (of_property_read_u16(np, "language-id", &hub->lang_id))
hub->lang_id = USB251XB_DEF_LANGUAGE_ID;
if (of_property_read_u8(np, "boost-up", &hub->boost_up))
hub->boost_up = USB251XB_DEF_BOOST_UP;
cproperty_char = of_get_property(np, "manufacturer", NULL);
strscpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING,
sizeof(str));
hub->manufacturer_len = strlen(str) & 0xFF;
memset(hub->manufacturer, 0, USB251XB_STRING_BUFSIZE);
len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str));
len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN,
(wchar_t *)hub->manufacturer,
USB251XB_STRING_BUFSIZE);
cproperty_char = of_get_property(np, "product", NULL);
strscpy(str, cproperty_char ? : data->product_str, sizeof(str));
hub->product_len = strlen(str) & 0xFF;
memset(hub->product, 0, USB251XB_STRING_BUFSIZE);
len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str));
len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN,
(wchar_t *)hub->product,
USB251XB_STRING_BUFSIZE);
cproperty_char = of_get_property(np, "serial", NULL);
strscpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING,
sizeof(str));
hub->serial_len = strlen(str) & 0xFF;
memset(hub->serial, 0, USB251XB_STRING_BUFSIZE);
len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str));
len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN,
(wchar_t *)hub->serial,
USB251XB_STRING_BUFSIZE);
/*
* The datasheet documents the register as 'Port Swap' but in real the
* register controls the USB DP/DM signal swapping for each port.
*/
hub->port_swap = USB251XB_DEF_PORT_SWAP;
usb251xb_get_ports_field(hub, "swap-dx-lanes", data->port_cnt,
false, &hub->port_swap);
/* The following parameters are currently not exposed to devicetree, but
* may be as soon as needed.
*/
hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
hub->boost_57 = USB251XB_DEF_BOOST_57;
hub->boost_14 = USB251XB_DEF_BOOST_14;
hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
hub->port_map7 = USB251XB_DEF_PORT_MAP_7;
return 0;
}
static const struct of_device_id usb251xb_of_match[] = {
{
.compatible = "microchip,usb2422",
.data = &usb2422_data,
}, {
.compatible = "microchip,usb2512b",
.data = &usb2512b_data,
}, {
.compatible = "microchip,usb2512bi",
.data = &usb2512bi_data,
}, {
.compatible = "microchip,usb2513b",
.data = &usb2513b_data,
}, {
.compatible = "microchip,usb2513bi",
.data = &usb2513bi_data,
}, {
.compatible = "microchip,usb2514b",
.data = &usb2514b_data,
}, {
.compatible = "microchip,usb2514bi",
.data = &usb2514bi_data,
}, {
.compatible = "microchip,usb2517",
.data = &usb2517_data,
}, {
.compatible = "microchip,usb2517i",
.data = &usb2517i_data,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(of, usb251xb_of_match);
static void usb251xb_regulator_disable_action(void *data)
{
struct usb251xb *hub = data;
regulator_disable(hub->vdd);
}
static int usb251xb_probe(struct usb251xb *hub)
{
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
const struct usb251xb_data *usb_data = of_device_get_match_data(dev);
int err;
if (np && usb_data) {
err = usb251xb_get_ofdata(hub, usb_data);
if (err) {
dev_err(dev, "failed to get ofdata: %d\n", err);
return err;
}
}
/*
* usb251x SMBus-slave SCL lane is muxed with CFG_SEL0 pin. So if anyone
* tries to work with the bus at the moment the hub reset is released,
* it may cause an invalid config being latched by usb251x. Particularly
* one of the config modes makes the hub loading a default registers
* value without SMBus-slave interface activation. If the hub
* accidentally gets this mode, this will cause the driver SMBus-
* functions failure. Normally we could just lock the SMBus-segment the
* hub i2c-interface resides for the device-specific reset timing. But
* the GPIO controller, which is used to handle the hub reset, might be
* placed at the same i2c-bus segment. In this case an error should be
* returned since we can't safely use the GPIO controller to clear the
* reset state (it may affect the hub configuration) and we can't lock
* the i2c-bus segment (it will cause a deadlock).
*/
err = usb251x_check_gpio_chip(hub);
if (err)
return err;
hub->vdd = devm_regulator_get(dev, "vdd");
if (IS_ERR(hub->vdd))
return PTR_ERR(hub->vdd);
err = regulator_enable(hub->vdd);
if (err)
return err;
err = devm_add_action_or_reset(dev,
usb251xb_regulator_disable_action, hub);
if (err)
return err;
err = usb251xb_connect(hub);
if (err) {
dev_err(dev, "Failed to connect hub (%d)\n", err);
return err;
}
dev_info(dev, "Hub probed successfully\n");
return 0;
}
static int usb251xb_i2c_probe(struct i2c_client *i2c)
{
struct usb251xb *hub;
hub = devm_kzalloc(&i2c->dev, sizeof(struct usb251xb), GFP_KERNEL);
if (!hub)
return -ENOMEM;
i2c_set_clientdata(i2c, hub);
hub->dev = &i2c->dev;
hub->i2c = i2c;
return usb251xb_probe(hub);
}
static int __maybe_unused usb251xb_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct usb251xb *hub = i2c_get_clientdata(client);
return regulator_disable(hub->vdd);
}
static int __maybe_unused usb251xb_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct usb251xb *hub = i2c_get_clientdata(client);
int err;
err = regulator_enable(hub->vdd);
if (err)
return err;
return usb251xb_connect(hub);
}
static SIMPLE_DEV_PM_OPS(usb251xb_pm_ops, usb251xb_suspend, usb251xb_resume);
static const struct i2c_device_id usb251xb_id[] = {
{ "usb2422", 0 },
{ "usb2512b", 0 },
{ "usb2512bi", 0 },
{ "usb2513b", 0 },
{ "usb2513bi", 0 },
{ "usb2514b", 0 },
{ "usb2514bi", 0 },
{ "usb2517", 0 },
{ "usb2517i", 0 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, usb251xb_id);
static struct i2c_driver usb251xb_i2c_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = usb251xb_of_match,
.pm = &usb251xb_pm_ops,
},
.probe = usb251xb_i2c_probe,
.id_table = usb251xb_id,
};
module_i2c_driver(usb251xb_i2c_driver);
MODULE_AUTHOR("Richard Leitner <richard.leitner@skidata.com>");
MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink