mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 11:19:37 +00:00
![Chunfeng Yun](/assets/img/avatar_default.png)
Use devm_platform_ioremap_resource to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1604642930-29019-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
493 lines
13 KiB
C
493 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* PCIe PHY driver for Lantiq VRX200 and ARX300 SoCs.
|
|
*
|
|
* Copyright (C) 2019 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
*
|
|
* Based on the BSP (called "UGW") driver:
|
|
* Copyright (C) 2009-2015 Lei Chuanhua <chuanhua.lei@lantiq.com>
|
|
* Copyright (C) 2016 Intel Corporation
|
|
*
|
|
* TODO: PHY modes other than 36MHz (without "SSC")
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
|
|
|
|
#define PCIE_PHY_PLL_CTRL1 0x44
|
|
|
|
#define PCIE_PHY_PLL_CTRL2 0x46
|
|
#define PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK GENMASK(7, 0)
|
|
#define PCIE_PHY_PLL_CTRL2_CONST_SDM_EN BIT(8)
|
|
#define PCIE_PHY_PLL_CTRL2_PLL_SDM_EN BIT(9)
|
|
|
|
#define PCIE_PHY_PLL_CTRL3 0x48
|
|
#define PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_EN BIT(1)
|
|
#define PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_MASK GENMASK(6, 4)
|
|
|
|
#define PCIE_PHY_PLL_CTRL4 0x4a
|
|
#define PCIE_PHY_PLL_CTRL5 0x4c
|
|
#define PCIE_PHY_PLL_CTRL6 0x4e
|
|
#define PCIE_PHY_PLL_CTRL7 0x50
|
|
#define PCIE_PHY_PLL_A_CTRL1 0x52
|
|
|
|
#define PCIE_PHY_PLL_A_CTRL2 0x54
|
|
#define PCIE_PHY_PLL_A_CTRL2_LF_MODE_EN BIT(14)
|
|
|
|
#define PCIE_PHY_PLL_A_CTRL3 0x56
|
|
#define PCIE_PHY_PLL_A_CTRL3_MMD_MASK GENMASK(15, 13)
|
|
|
|
#define PCIE_PHY_PLL_STATUS 0x58
|
|
|
|
#define PCIE_PHY_TX1_CTRL1 0x60
|
|
#define PCIE_PHY_TX1_CTRL1_FORCE_EN BIT(3)
|
|
#define PCIE_PHY_TX1_CTRL1_LOAD_EN BIT(4)
|
|
|
|
#define PCIE_PHY_TX1_CTRL2 0x62
|
|
#define PCIE_PHY_TX1_CTRL3 0x64
|
|
#define PCIE_PHY_TX1_A_CTRL1 0x66
|
|
#define PCIE_PHY_TX1_A_CTRL2 0x68
|
|
#define PCIE_PHY_TX1_MOD1 0x6a
|
|
#define PCIE_PHY_TX1_MOD2 0x6c
|
|
#define PCIE_PHY_TX1_MOD3 0x6e
|
|
|
|
#define PCIE_PHY_TX2_CTRL1 0x70
|
|
#define PCIE_PHY_TX2_CTRL1_LOAD_EN BIT(4)
|
|
|
|
#define PCIE_PHY_TX2_CTRL2 0x72
|
|
#define PCIE_PHY_TX2_A_CTRL1 0x76
|
|
#define PCIE_PHY_TX2_A_CTRL2 0x78
|
|
#define PCIE_PHY_TX2_MOD1 0x7a
|
|
#define PCIE_PHY_TX2_MOD2 0x7c
|
|
#define PCIE_PHY_TX2_MOD3 0x7e
|
|
|
|
#define PCIE_PHY_RX1_CTRL1 0xa0
|
|
#define PCIE_PHY_RX1_CTRL1_LOAD_EN BIT(1)
|
|
|
|
#define PCIE_PHY_RX1_CTRL2 0xa2
|
|
#define PCIE_PHY_RX1_CDR 0xa4
|
|
#define PCIE_PHY_RX1_EI 0xa6
|
|
#define PCIE_PHY_RX1_A_CTRL 0xaa
|
|
|
|
struct ltq_vrx200_pcie_phy_priv {
|
|
struct phy *phy;
|
|
unsigned int mode;
|
|
struct device *dev;
|
|
struct regmap *phy_regmap;
|
|
struct regmap *rcu_regmap;
|
|
struct clk *pdi_clk;
|
|
struct clk *phy_clk;
|
|
struct reset_control *phy_reset;
|
|
struct reset_control *pcie_reset;
|
|
u32 rcu_ahb_endian_offset;
|
|
u32 rcu_ahb_endian_big_endian_mask;
|
|
};
|
|
|
|
static void ltq_vrx200_pcie_phy_common_setup(struct phy *phy)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
|
|
|
|
/* PLL Setting */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL1, 0x120e);
|
|
|
|
/* increase the bias reference voltage */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL2, 0x39d7);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL3, 0x0900);
|
|
|
|
/* Endcnt */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_RX1_EI, 0x0004);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_RX1_A_CTRL, 0x6803);
|
|
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_TX1_CTRL1,
|
|
PCIE_PHY_TX1_CTRL1_FORCE_EN,
|
|
PCIE_PHY_TX1_CTRL1_FORCE_EN);
|
|
|
|
/* predrv_ser_en */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX1_A_CTRL2, 0x0706);
|
|
|
|
/* ctrl_lim */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX1_CTRL3, 0x1fff);
|
|
|
|
/* ctrl */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX1_A_CTRL1, 0x0810);
|
|
|
|
/* predrv_ser_en */
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_TX2_A_CTRL2, 0x7f00,
|
|
0x4700);
|
|
|
|
/* RTERM */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX1_CTRL2, 0x2e00);
|
|
|
|
/* Improved 100MHz clock output */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX2_CTRL2, 0x3096);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX2_A_CTRL2, 0x4707);
|
|
|
|
/* Reduced CDR BW to avoid glitches */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_RX1_CDR, 0x0235);
|
|
}
|
|
|
|
static void pcie_phy_36mhz_mode_setup(struct phy *phy)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
|
|
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL3,
|
|
PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_EN, 0x0000);
|
|
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL3,
|
|
PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_MASK, 0x0000);
|
|
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
|
|
PCIE_PHY_PLL_CTRL2_PLL_SDM_EN,
|
|
PCIE_PHY_PLL_CTRL2_PLL_SDM_EN);
|
|
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
|
|
PCIE_PHY_PLL_CTRL2_CONST_SDM_EN,
|
|
PCIE_PHY_PLL_CTRL2_CONST_SDM_EN);
|
|
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL3,
|
|
PCIE_PHY_PLL_A_CTRL3_MMD_MASK,
|
|
FIELD_PREP(PCIE_PHY_PLL_A_CTRL3_MMD_MASK, 0x1));
|
|
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL2,
|
|
PCIE_PHY_PLL_A_CTRL2_LF_MODE_EN, 0x0000);
|
|
|
|
/* const_sdm */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL1, 0x38e4);
|
|
|
|
regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
|
|
PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK,
|
|
FIELD_PREP(PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK,
|
|
0xee));
|
|
|
|
/* pllmod */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL7, 0x0002);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL6, 0x3a04);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL5, 0xfae3);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL4, 0x1b72);
|
|
}
|
|
|
|
static int ltq_vrx200_pcie_phy_wait_for_pll(struct phy *phy)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
ret = regmap_read_poll_timeout(priv->phy_regmap, PCIE_PHY_PLL_STATUS,
|
|
tmp, ((tmp & 0x0070) == 0x0070), 10,
|
|
10000);
|
|
if (ret) {
|
|
dev_err(priv->dev, "PLL Link timeout, PLL status = 0x%04x\n",
|
|
tmp);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ltq_vrx200_pcie_phy_apply_workarounds(struct phy *phy)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
|
|
static const struct reg_default slices[] = {
|
|
{
|
|
.reg = PCIE_PHY_TX1_CTRL1,
|
|
.def = PCIE_PHY_TX1_CTRL1_LOAD_EN,
|
|
},
|
|
{
|
|
.reg = PCIE_PHY_TX2_CTRL1,
|
|
.def = PCIE_PHY_TX2_CTRL1_LOAD_EN,
|
|
},
|
|
{
|
|
.reg = PCIE_PHY_RX1_CTRL1,
|
|
.def = PCIE_PHY_RX1_CTRL1_LOAD_EN,
|
|
}
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(slices); i++) {
|
|
/* enable load_en */
|
|
regmap_update_bits(priv->phy_regmap, slices[i].reg,
|
|
slices[i].def, slices[i].def);
|
|
|
|
udelay(1);
|
|
|
|
/* disable load_en */
|
|
regmap_update_bits(priv->phy_regmap, slices[i].reg,
|
|
slices[i].def, 0x0);
|
|
}
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
/* TX2 modulation */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD1, 0x1ffe);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD2, 0xfffe);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD3, 0x0601);
|
|
usleep_range(1000, 2000);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD3, 0x0001);
|
|
|
|
/* TX1 modulation */
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD1, 0x1ffe);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD2, 0xfffe);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD3, 0x0601);
|
|
usleep_range(1000, 2000);
|
|
regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD3, 0x0001);
|
|
}
|
|
}
|
|
|
|
static int ltq_vrx200_pcie_phy_init(struct phy *phy)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
if (of_device_is_big_endian(priv->dev->of_node))
|
|
regmap_update_bits(priv->rcu_regmap,
|
|
priv->rcu_ahb_endian_offset,
|
|
priv->rcu_ahb_endian_big_endian_mask,
|
|
priv->rcu_ahb_endian_big_endian_mask);
|
|
else
|
|
regmap_update_bits(priv->rcu_regmap,
|
|
priv->rcu_ahb_endian_offset,
|
|
priv->rcu_ahb_endian_big_endian_mask, 0x0);
|
|
|
|
ret = reset_control_assert(priv->phy_reset);
|
|
if (ret)
|
|
goto err;
|
|
|
|
udelay(1);
|
|
|
|
ret = reset_control_deassert(priv->phy_reset);
|
|
if (ret)
|
|
goto err;
|
|
|
|
udelay(1);
|
|
|
|
ret = reset_control_deassert(priv->pcie_reset);
|
|
if (ret)
|
|
goto err_assert_phy_reset;
|
|
|
|
/* Make sure PHY PLL is stable */
|
|
usleep_range(20, 40);
|
|
|
|
return 0;
|
|
|
|
err_assert_phy_reset:
|
|
reset_control_assert(priv->phy_reset);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int ltq_vrx200_pcie_phy_exit(struct phy *phy)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
ret = reset_control_assert(priv->pcie_reset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = reset_control_assert(priv->phy_reset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltq_vrx200_pcie_phy_power_on(struct phy *phy)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
/* Enable PDI to access PCIe PHY register */
|
|
ret = clk_prepare_enable(priv->pdi_clk);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Configure PLL and PHY clock */
|
|
ltq_vrx200_pcie_phy_common_setup(phy);
|
|
|
|
pcie_phy_36mhz_mode_setup(phy);
|
|
|
|
/* Enable the PCIe PHY and make PLL setting take effect */
|
|
ret = clk_prepare_enable(priv->phy_clk);
|
|
if (ret)
|
|
goto err_disable_pdi_clk;
|
|
|
|
/* Check if we are in "startup ready" status */
|
|
ret = ltq_vrx200_pcie_phy_wait_for_pll(phy);
|
|
if (ret)
|
|
goto err_disable_phy_clk;
|
|
|
|
ltq_vrx200_pcie_phy_apply_workarounds(phy);
|
|
|
|
return 0;
|
|
|
|
err_disable_phy_clk:
|
|
clk_disable_unprepare(priv->phy_clk);
|
|
err_disable_pdi_clk:
|
|
clk_disable_unprepare(priv->pdi_clk);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int ltq_vrx200_pcie_phy_power_off(struct phy *phy)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
|
|
|
|
clk_disable_unprepare(priv->phy_clk);
|
|
clk_disable_unprepare(priv->pdi_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops ltq_vrx200_pcie_phy_ops = {
|
|
.init = ltq_vrx200_pcie_phy_init,
|
|
.exit = ltq_vrx200_pcie_phy_exit,
|
|
.power_on = ltq_vrx200_pcie_phy_power_on,
|
|
.power_off = ltq_vrx200_pcie_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct phy *ltq_vrx200_pcie_phy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct ltq_vrx200_pcie_phy_priv *priv = dev_get_drvdata(dev);
|
|
unsigned int mode;
|
|
|
|
if (args->args_count != 1) {
|
|
dev_err(dev, "invalid number of arguments\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
mode = args->args[0];
|
|
|
|
switch (mode) {
|
|
case LANTIQ_PCIE_PHY_MODE_36MHZ:
|
|
priv->mode = mode;
|
|
break;
|
|
|
|
case LANTIQ_PCIE_PHY_MODE_25MHZ:
|
|
case LANTIQ_PCIE_PHY_MODE_25MHZ_SSC:
|
|
case LANTIQ_PCIE_PHY_MODE_36MHZ_SSC:
|
|
case LANTIQ_PCIE_PHY_MODE_100MHZ:
|
|
case LANTIQ_PCIE_PHY_MODE_100MHZ_SSC:
|
|
dev_err(dev, "PHY mode not implemented yet: %u\n", mode);
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
default:
|
|
dev_err(dev, "invalid PHY mode %u\n", mode);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
return priv->phy;
|
|
}
|
|
|
|
static int ltq_vrx200_pcie_phy_probe(struct platform_device *pdev)
|
|
{
|
|
static const struct regmap_config regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.reg_stride = 2,
|
|
.max_register = PCIE_PHY_RX1_A_CTRL,
|
|
};
|
|
struct ltq_vrx200_pcie_phy_priv *priv;
|
|
struct device *dev = &pdev->dev;
|
|
struct phy_provider *provider;
|
|
void __iomem *base;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
priv->phy_regmap = devm_regmap_init_mmio(dev, base, ®map_config);
|
|
if (IS_ERR(priv->phy_regmap))
|
|
return PTR_ERR(priv->phy_regmap);
|
|
|
|
priv->rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
|
|
"lantiq,rcu");
|
|
if (IS_ERR(priv->rcu_regmap))
|
|
return PTR_ERR(priv->rcu_regmap);
|
|
|
|
ret = device_property_read_u32(dev, "lantiq,rcu-endian-offset",
|
|
&priv->rcu_ahb_endian_offset);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"failed to parse the 'lantiq,rcu-endian-offset' property\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = device_property_read_u32(dev, "lantiq,rcu-big-endian-mask",
|
|
&priv->rcu_ahb_endian_big_endian_mask);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"failed to parse the 'lantiq,rcu-big-endian-mask' property\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->pdi_clk = devm_clk_get(dev, "pdi");
|
|
if (IS_ERR(priv->pdi_clk))
|
|
return PTR_ERR(priv->pdi_clk);
|
|
|
|
priv->phy_clk = devm_clk_get(dev, "phy");
|
|
if (IS_ERR(priv->phy_clk))
|
|
return PTR_ERR(priv->phy_clk);
|
|
|
|
priv->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
|
|
if (IS_ERR(priv->phy_reset))
|
|
return PTR_ERR(priv->phy_reset);
|
|
|
|
priv->pcie_reset = devm_reset_control_get_shared(dev, "pcie");
|
|
if (IS_ERR(priv->pcie_reset))
|
|
return PTR_ERR(priv->pcie_reset);
|
|
|
|
priv->dev = dev;
|
|
|
|
priv->phy = devm_phy_create(dev, dev->of_node,
|
|
<q_vrx200_pcie_phy_ops);
|
|
if (IS_ERR(priv->phy)) {
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(priv->phy);
|
|
}
|
|
|
|
phy_set_drvdata(priv->phy, priv);
|
|
dev_set_drvdata(dev, priv);
|
|
|
|
provider = devm_of_phy_provider_register(dev,
|
|
ltq_vrx200_pcie_phy_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(provider);
|
|
}
|
|
|
|
static const struct of_device_id ltq_vrx200_pcie_phy_of_match[] = {
|
|
{ .compatible = "lantiq,vrx200-pcie-phy", },
|
|
{ .compatible = "lantiq,arx300-pcie-phy", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ltq_vrx200_pcie_phy_of_match);
|
|
|
|
static struct platform_driver ltq_vrx200_pcie_phy_driver = {
|
|
.probe = ltq_vrx200_pcie_phy_probe,
|
|
.driver = {
|
|
.name = "ltq-vrx200-pcie-phy",
|
|
.of_match_table = ltq_vrx200_pcie_phy_of_match,
|
|
}
|
|
};
|
|
module_platform_driver(ltq_vrx200_pcie_phy_driver);
|
|
|
|
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
|
|
MODULE_DESCRIPTION("Lantiq VRX200 and ARX300 PCIe PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|