mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-26 20:38:12 +00:00
14d7ca5c57
Impact: Changes reboot behavior. If port CF9 seems to be safe to touch, attempt it before trying the keyboard controller. Port CF9 is not available on all chipsets (a significant but decreasing number of modern chipsets don't implement it), but port CF9 itself should in general be safe to poke (no ill effects if unimplemented) on any system which has PCI Configuration Method #1 or #2, as it falls inside the PCI configuration port range in both cases. No chipset without PCI is known to have port CF9, either, although an explicit "pci=bios" would mean we miss this and therefore don't use port CF9. An explicit "reboot=pci" can be used to force the use of port CF9. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
317 lines
6.4 KiB
C
317 lines
6.4 KiB
C
/*
|
|
* direct.c - Low-level direct PCI config space access
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dmi.h>
|
|
#include "pci.h"
|
|
|
|
/*
|
|
* Functions for accessing PCI base (first 256 bytes) and extended
|
|
* (4096 bytes per PCI function) configuration space with type 1
|
|
* accesses.
|
|
*/
|
|
|
|
#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
|
|
(0x80000000 | ((reg & 0xF00) << 16) | (bus << 16) \
|
|
| (devfn << 8) | (reg & 0xFC))
|
|
|
|
static int pci_conf1_read(unsigned int seg, unsigned int bus,
|
|
unsigned int devfn, int reg, int len, u32 *value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
|
|
*value = -1;
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&pci_config_lock, flags);
|
|
|
|
outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
|
|
|
|
switch (len) {
|
|
case 1:
|
|
*value = inb(0xCFC + (reg & 3));
|
|
break;
|
|
case 2:
|
|
*value = inw(0xCFC + (reg & 2));
|
|
break;
|
|
case 4:
|
|
*value = inl(0xCFC);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pci_config_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_conf1_write(unsigned int seg, unsigned int bus,
|
|
unsigned int devfn, int reg, int len, u32 value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if ((bus > 255) || (devfn > 255) || (reg > 4095))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&pci_config_lock, flags);
|
|
|
|
outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
|
|
|
|
switch (len) {
|
|
case 1:
|
|
outb((u8)value, 0xCFC + (reg & 3));
|
|
break;
|
|
case 2:
|
|
outw((u16)value, 0xCFC + (reg & 2));
|
|
break;
|
|
case 4:
|
|
outl((u32)value, 0xCFC);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pci_config_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#undef PCI_CONF1_ADDRESS
|
|
|
|
struct pci_raw_ops pci_direct_conf1 = {
|
|
.read = pci_conf1_read,
|
|
.write = pci_conf1_write,
|
|
};
|
|
|
|
|
|
/*
|
|
* Functions for accessing PCI configuration space with type 2 accesses
|
|
*/
|
|
|
|
#define PCI_CONF2_ADDRESS(dev, reg) (u16)(0xC000 | (dev << 8) | reg)
|
|
|
|
static int pci_conf2_read(unsigned int seg, unsigned int bus,
|
|
unsigned int devfn, int reg, int len, u32 *value)
|
|
{
|
|
unsigned long flags;
|
|
int dev, fn;
|
|
|
|
if ((bus > 255) || (devfn > 255) || (reg > 255)) {
|
|
*value = -1;
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev = PCI_SLOT(devfn);
|
|
fn = PCI_FUNC(devfn);
|
|
|
|
if (dev & 0x10)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
spin_lock_irqsave(&pci_config_lock, flags);
|
|
|
|
outb((u8)(0xF0 | (fn << 1)), 0xCF8);
|
|
outb((u8)bus, 0xCFA);
|
|
|
|
switch (len) {
|
|
case 1:
|
|
*value = inb(PCI_CONF2_ADDRESS(dev, reg));
|
|
break;
|
|
case 2:
|
|
*value = inw(PCI_CONF2_ADDRESS(dev, reg));
|
|
break;
|
|
case 4:
|
|
*value = inl(PCI_CONF2_ADDRESS(dev, reg));
|
|
break;
|
|
}
|
|
|
|
outb(0, 0xCF8);
|
|
|
|
spin_unlock_irqrestore(&pci_config_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_conf2_write(unsigned int seg, unsigned int bus,
|
|
unsigned int devfn, int reg, int len, u32 value)
|
|
{
|
|
unsigned long flags;
|
|
int dev, fn;
|
|
|
|
if ((bus > 255) || (devfn > 255) || (reg > 255))
|
|
return -EINVAL;
|
|
|
|
dev = PCI_SLOT(devfn);
|
|
fn = PCI_FUNC(devfn);
|
|
|
|
if (dev & 0x10)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
spin_lock_irqsave(&pci_config_lock, flags);
|
|
|
|
outb((u8)(0xF0 | (fn << 1)), 0xCF8);
|
|
outb((u8)bus, 0xCFA);
|
|
|
|
switch (len) {
|
|
case 1:
|
|
outb((u8)value, PCI_CONF2_ADDRESS(dev, reg));
|
|
break;
|
|
case 2:
|
|
outw((u16)value, PCI_CONF2_ADDRESS(dev, reg));
|
|
break;
|
|
case 4:
|
|
outl((u32)value, PCI_CONF2_ADDRESS(dev, reg));
|
|
break;
|
|
}
|
|
|
|
outb(0, 0xCF8);
|
|
|
|
spin_unlock_irqrestore(&pci_config_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#undef PCI_CONF2_ADDRESS
|
|
|
|
struct pci_raw_ops pci_direct_conf2 = {
|
|
.read = pci_conf2_read,
|
|
.write = pci_conf2_write,
|
|
};
|
|
|
|
|
|
/*
|
|
* Before we decide to use direct hardware access mechanisms, we try to do some
|
|
* trivial checks to ensure it at least _seems_ to be working -- we just test
|
|
* whether bus 00 contains a host bridge (this is similar to checking
|
|
* techniques used in XFree86, but ours should be more reliable since we
|
|
* attempt to make use of direct access hints provided by the PCI BIOS).
|
|
*
|
|
* This should be close to trivial, but it isn't, because there are buggy
|
|
* chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
|
|
*/
|
|
static int __init pci_sanity_check(struct pci_raw_ops *o)
|
|
{
|
|
u32 x = 0;
|
|
int devfn;
|
|
|
|
if (pci_probe & PCI_NO_CHECKS)
|
|
return 1;
|
|
/* Assume Type 1 works for newer systems.
|
|
This handles machines that don't have anything on PCI Bus 0. */
|
|
if (dmi_get_year(DMI_BIOS_DATE) >= 2001)
|
|
return 1;
|
|
|
|
for (devfn = 0; devfn < 0x100; devfn++) {
|
|
if (o->read(0, 0, devfn, PCI_CLASS_DEVICE, 2, &x))
|
|
continue;
|
|
if (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)
|
|
return 1;
|
|
|
|
if (o->read(0, 0, devfn, PCI_VENDOR_ID, 2, &x))
|
|
continue;
|
|
if (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)
|
|
return 1;
|
|
}
|
|
|
|
DBG(KERN_WARNING "PCI: Sanity check failed\n");
|
|
return 0;
|
|
}
|
|
|
|
static int __init pci_check_type1(void)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int tmp;
|
|
int works = 0;
|
|
|
|
local_irq_save(flags);
|
|
|
|
outb(0x01, 0xCFB);
|
|
tmp = inl(0xCF8);
|
|
outl(0x80000000, 0xCF8);
|
|
if (inl(0xCF8) == 0x80000000 && pci_sanity_check(&pci_direct_conf1)) {
|
|
works = 1;
|
|
}
|
|
outl(tmp, 0xCF8);
|
|
local_irq_restore(flags);
|
|
|
|
return works;
|
|
}
|
|
|
|
static int __init pci_check_type2(void)
|
|
{
|
|
unsigned long flags;
|
|
int works = 0;
|
|
|
|
local_irq_save(flags);
|
|
|
|
outb(0x00, 0xCFB);
|
|
outb(0x00, 0xCF8);
|
|
outb(0x00, 0xCFA);
|
|
if (inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00 &&
|
|
pci_sanity_check(&pci_direct_conf2)) {
|
|
works = 1;
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return works;
|
|
}
|
|
|
|
void __init pci_direct_init(int type)
|
|
{
|
|
if (type == 0)
|
|
return;
|
|
printk(KERN_INFO "PCI: Using configuration type %d for base access\n",
|
|
type);
|
|
if (type == 1) {
|
|
raw_pci_ops = &pci_direct_conf1;
|
|
if (raw_pci_ext_ops)
|
|
return;
|
|
if (!(pci_probe & PCI_HAS_IO_ECS))
|
|
return;
|
|
printk(KERN_INFO "PCI: Using configuration type 1 "
|
|
"for extended access\n");
|
|
raw_pci_ext_ops = &pci_direct_conf1;
|
|
return;
|
|
}
|
|
raw_pci_ops = &pci_direct_conf2;
|
|
}
|
|
|
|
int __init pci_direct_probe(void)
|
|
{
|
|
struct resource *region, *region2;
|
|
|
|
if ((pci_probe & PCI_PROBE_CONF1) == 0)
|
|
goto type2;
|
|
region = request_region(0xCF8, 8, "PCI conf1");
|
|
if (!region)
|
|
goto type2;
|
|
|
|
if (pci_check_type1()) {
|
|
raw_pci_ops = &pci_direct_conf1;
|
|
port_cf9_safe = true;
|
|
return 1;
|
|
}
|
|
release_resource(region);
|
|
|
|
type2:
|
|
if ((pci_probe & PCI_PROBE_CONF2) == 0)
|
|
return 0;
|
|
region = request_region(0xCF8, 4, "PCI conf2");
|
|
if (!region)
|
|
return 0;
|
|
region2 = request_region(0xC000, 0x1000, "PCI conf2");
|
|
if (!region2)
|
|
goto fail2;
|
|
|
|
if (pci_check_type2()) {
|
|
raw_pci_ops = &pci_direct_conf2;
|
|
port_cf9_safe = true;
|
|
return 2;
|
|
}
|
|
|
|
release_resource(region2);
|
|
fail2:
|
|
release_resource(region);
|
|
return 0;
|
|
}
|