linux-stable/arch/arm64/Kconfig.platforms
Linus Torvalds e90937e756 ARM: arm64: Devicetree updates for v4.14
As usual, device tree updates is the bulk of our material in this merge
 window. This time around, 559 patches affecting both 32- and 64-bit
 platforms.
 
 Changes are too many to list individually, but some of the larger ones:
 
 New platform/SoC support:
 
  - Automotive:
    + Renesas R-Car D3 (R8A77995)
    + TI DT76x
    + MediaTek mt2712e
  - Communication-oriented:
    + Qualcomm IPQ8074
    + Broadcom Stingray
    + Marvell Armada 8080
  - Set top box:
    + Uniphier PXs3
 
 Besides some vendor reference boards for the SoC above, there are also several
 new boards/machines:
 
  - TI AM335x Moxa UC-8100-ME-T open platform
  - TI AM57xx Beaglebone X15 Rev C
  - Microchip/Atmel sama5d27 SoM1 EK
  - Broadcom Raspberry Pi Zero W
  - Gemini-based D-Link DIR-685 router
  - Freescale i.MX6:
    + Toradex Apalis module + Apalis and Ixora carrier boards
    + Engicam GEAM6UL Starter Kit
  - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
  - Mediatek mt7623-based BananaPi R2
  - Several Allwinner-based single-board computers:
   + Cubietruck plus
   + Bananapi M3, M2M and M64
   + NanoPi A64
   + A64-OLinuXino
   + Pine64
  - Rockchip RK3328 Pine64/Rock64 board support
  - Rockchip RK3399 boards:
   + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
   + Theobroma Systems RK3399-Q7 SoM
  - ZTE ZX296718 PCBOX Board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdtjAAoJEIwa5zzehBx3PzgP/iCQyUk5wklG9E5YNl8a9m/o
 djBkelabTm52s5ZTu6Awsq5rx8jUMqcb0vo+9v9yPWFG6On2oTZyZ/rE1Wbj3+gG
 +ENVyRgxmzYDTXqQLiu1UOV9wSA0gHwQCRZvE7i32NNfLu+tAsvu9e/AuznQ1xhR
 4G7dGCRRlRkZkrVKrJ7JjklmW578pFQkZLmz8K2nWqwh1tKpK3fY19SrwUKx+YCR
 tnMPYAPjB5zxR9tfcDS4FUKdiC7dMiMzZNGiYl5a26X6wsNR7xYtNzFMaGZn1ecG
 PwOS+DAnj8J+AfpQBLWu9xytHbJdqITRuNcF+OXNVW9TKmb0syf7VgRUDkhjIMxP
 aGZc4Q6PwgTRwnX+w6fTzJTyk+uXtieCicZaaZ1jlgcQq0pfbzJ1vZMpq4aoVlxU
 mS84i1bd8AiavmHuyIRNB3/T4aAsVhTUIBndXluKV8yWroXhAukfI1YmGr1Eux7C
 fy5pPeDqk9lXR3bqIhfnaLoVsApEXTOWMC8X48vwfaQHiCGR9JJwpfsGcaNi1bri
 Col1qRzkXWGA6KqTWtpo+o12rYuMGc0mpZTCmejKuBoxMXOU+wLyJYgaxa7pyesX
 S5rLaIe2l9ppXHjjEERp7AzczzLS5W20Tez5vYnZAQb1dYuJzwXwiATt8NT+XG3V
 Wu92UwUfjxYk8vGz48ph
 =R45j
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...
2017-09-10 20:54:48 -07:00

268 lines
6 KiB
Text

menu "Platform selection"
config ARCH_ACTIONS
bool "Actions Semi Platforms"
select OWL_TIMER
help
This enables support for the Actions Semiconductor S900 SoC family.
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select GENERIC_IRQ_CHIP
select PINCTRL
select RESET_CONTROLLER
help
This enables support for Allwinner sunxi based SoCs like the A64.
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
select ALPINE_MSI if PCI
help
This enables support for the Annapurna Labs Alpine
Soc family.
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
select TIMER_OF
select GPIOLIB
select PINCTRL
select PINCTRL_BCM2835
select ARM_AMBA
select ARM_TIMER_SP804
select HAVE_ARM_ARCH_TIMER
help
This enables support for the Broadcom BCM2837 SoC.
This SoC is used in the Raspberry Pi 3 device.
config ARCH_BCM_IPROC
bool "Broadcom iProc SoC Family"
select COMMON_CLK_IPROC
select GPIOLIB
select PINCTRL
help
This enables support for Broadcom iProc based SoCs
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
select DW_APB_ICTL
select GPIOLIB
select PINCTRL
help
This enables support for Marvell Berlin SoC Family
config ARCH_BRCMSTB
bool "Broadcom Set-Top-Box SoCs"
select BRCMSTB_L2_IRQ
select GENERIC_IRQ_CHIP
help
This enables support for Broadcom's ARMv8 Set Top Box SoCs
config ARCH_EXYNOS
bool "ARMv8 based Samsung Exynos SoC family"
select COMMON_CLK_SAMSUNG
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select EXYNOS_PMU
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
select SOC_SAMSUNG
help
This enables support for ARMv8 based Samsung Exynos SoC family.
config ARCH_LAYERSCAPE
bool "ARMv8 based Freescale Layerscape SoC family"
select EDAC_SUPPORT
help
This enables support for the Freescale Layerscape SoC family.
config ARCH_LG1K
bool "LG Electronics LG1K SoC Family"
help
This enables support for LG Electronics LG1K SoC Family
config ARCH_HISI
bool "Hisilicon SoC Family"
select ARM_TIMER_SP804
select HISILICON_IRQ_MBIGEN if PCI
select PINCTRL
help
This enables support for Hisilicon ARMv8 SoC family
config ARCH_MEDIATEK
bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
select ARM_GIC
select PINCTRL
select MTK_TIMER
help
Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
config ARCH_MESON
bool "Amlogic Platforms"
select PINCTRL
select PINCTRL_MESON
select COMMON_CLK_AMLOGIC
select COMMON_CLK_GXBB
help
This enables support for the Amlogic S905 SoCs.
config ARCH_MVEBU
bool "Marvell EBU SoC Family"
select ARMADA_AP806_SYSCON
select ARMADA_CP110_SYSCON
select ARMADA_37XX_CLK
select GPIOLIB
select GPIOLIB_IRQCHIP
select MVEBU_GICP
select MVEBU_ICU
select MVEBU_ODMI
select MVEBU_PIC
select OF_GPIO
select PINCTRL
select PINCTRL_ARMADA_37XX
select PINCTRL_ARMADA_AP806
select PINCTRL_ARMADA_CP110
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
- Armada 7K SoC Family
- Armada 8K SoC Family
config ARCH_QCOM
bool "Qualcomm Platforms"
select GPIOLIB
select PINCTRL
help
This enables support for the ARMv8 based Qualcomm chipsets.
config ARCH_REALTEK
bool "Realtek Platforms"
help
This enables support for the ARMv8 based Realtek chipsets,
like the RTD1295.
config ARCH_ROCKCHIP
bool "Rockchip Platforms"
select ARCH_HAS_RESET_CONTROLLER
select GPIOLIB
select PINCTRL
select PINCTRL_ROCKCHIP
select ROCKCHIP_TIMER
help
This enables support for the ARMv8 based Rockchip chipsets,
like the RK3368.
config ARCH_SEATTLE
bool "AMD Seattle SoC Family"
help
This enables support for AMD Seattle SOC Family
config ARCH_SHMOBILE
bool
config ARCH_RENESAS
bool "Renesas SoC Platforms"
select ARCH_SHMOBILE
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select RENESAS_IRQC
select SOC_BUS
help
This enables support for the ARMv8 based Renesas SoCs.
config ARCH_R8A7795
bool "Renesas R-Car H3 SoC Platform"
depends on ARCH_RENESAS
help
This enables support for the Renesas R-Car H3 SoC.
config ARCH_R8A7796
bool "Renesas R-Car M3-W SoC Platform"
depends on ARCH_RENESAS
help
This enables support for the Renesas R-Car M3-W SoC.
config ARCH_R8A77995
bool "Renesas R-Car D3 SoC Platform"
depends on ARCH_RENESAS
help
This enables support for the Renesas R-Car D3 SoC.
config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family"
help
This enables support for Altera's Stratix 10 SoCFPGA Family.
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select TIMER_OF
select GENERIC_CLOCKEVENTS
select GPIOLIB
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select RESET_CONTROLLER
help
This enables support for the NVIDIA Tegra SoC family.
config ARCH_SPRD
bool "Spreadtrum SoC platform"
help
Support for Spreadtrum ARM based SoCs
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
This enables support for Cavium's Thunder Family of SoCs.
config ARCH_THUNDER2
bool "Cavium ThunderX2 Server Processors"
select GPIOLIB
help
This enables support for Cavium's ThunderX2 CN99XX family of
server processors.
config ARCH_UNIPHIER
bool "Socionext UniPhier SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
help
This enables support for Socionext UniPhier SoC family.
config ARCH_VEXPRESS
bool "ARMv8 software model (Versatile Express)"
select COMMON_CLK_VERSATILE
select GPIOLIB
select PM
select PM_GENERIC_DOMAINS
select POWER_RESET_VEXPRESS
select VEXPRESS_CONFIG
help
This enables support for the ARMv8 software model (Versatile
Express).
config ARCH_VULCAN
def_bool n
config ARCH_XGENE
bool "AppliedMicro X-Gene SOC Family"
help
This enables support for AppliedMicro X-Gene SOC Family
config ARCH_ZX
bool "ZTE ZX SoC Family"
select PINCTRL
help
This enables support for ZTE ZX SoC Family
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
help
This enables support for Xilinx ZynqMP Family
endmenu