linux-stable/drivers/usb/usbip/vhci_sysfs.c
Nobuo Iwata a38711a88b usbip: auto retry for concurrent attach
This patch adds recovery from false busy state on concurrent attach
operation.

The procedure of attach operation is as below.
1) Find an unused port in /sys/devices/platform/vhci_hcd/status.
(userspace)
2) Request attach found port to driver through
/sys/devices/platform/vhci_hcd/attach. (userspace)
3) Lock table, reserve requested port and unlock table. (vhci driver)

Attaching more than one remote devices concurrently, same unused port
number will be found in step-1. Then one request will succeed and
others will fail even though there are some unused ports.

With this patch, driver returns EBUSY when requested port has already
been used. In this case, attach command retries from step-1: finding
another unused port. If there's no unused port, the attach operation
will fail in step-1. Otherwise it retries automatically using another
unused port.

vhci-hcd's interface (only errno) is changed as following.

Current	errno	New errno	Condition
EINVAL		same as left	specified port number is in invalid
				range
EAGAIN		same as left	platform_get_drvdata() failed
EINVAL		same as left	specified socket fd is not valid
EINVAL		EBUSY		specified port status is not free

The errno EBUSY was not used in userspace
src/usbip_attach.c:import_device(). It is needed to distinguish the
condition to be able to retry from other unrecoverable errors.

It is possible to avoid this failure by introducing userspace exclusive
control. But it's exaggerated for this special condition. The locking
itself has done in driver.
As an alternate solution, userspace doesn't specify port number, driver
searches unused port and it returns port number to the userspace. With
this solution, the interface is much different than this patch.

Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31 18:08:45 +02:00

476 lines
11 KiB
C

/*
* Copyright (C) 2003-2008 Takahiro Hirofuchi
* Copyright (C) 2015-2016 Nobuo Iwata
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
* USA.
*/
#include <linux/kthread.h>
#include <linux/file.h>
#include <linux/net.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "usbip_common.h"
#include "vhci.h"
/* TODO: refine locking ?*/
/*
* output example:
* hub port sta spd dev socket local_busid
* hs 0000 004 000 00000000 c5a7bb80 1-2.3
* ................................................
* ss 0008 004 000 00000000 d8cee980 2-3.4
* ................................................
*
* IP address can be retrieved from a socket pointer address by looking
* up /proc/net/{tcp,tcp6}. Also, a userland program may remember a
* port number and its peer IP address.
*/
static void port_show_vhci(char **out, int hub, int port, struct vhci_device *vdev)
{
if (hub == HUB_SPEED_HIGH)
*out += sprintf(*out, "hs %04u %03u ",
port, vdev->ud.status);
else /* hub == HUB_SPEED_SUPER */
*out += sprintf(*out, "ss %04u %03u ",
port, vdev->ud.status);
if (vdev->ud.status == VDEV_ST_USED) {
*out += sprintf(*out, "%03u %08x ",
vdev->speed, vdev->devid);
*out += sprintf(*out, "%16p %s",
vdev->ud.tcp_socket,
dev_name(&vdev->udev->dev));
} else {
*out += sprintf(*out, "000 00000000 ");
*out += sprintf(*out, "0000000000000000 0-0");
}
*out += sprintf(*out, "\n");
}
/* Sysfs entry to show port status */
static ssize_t status_show_vhci(int pdev_nr, char *out)
{
struct platform_device *pdev = vhcis[pdev_nr].pdev;
struct vhci *vhci;
struct usb_hcd *hcd;
struct vhci_hcd *vhci_hcd;
char *s = out;
int i;
unsigned long flags;
if (!pdev || !out) {
usbip_dbg_vhci_sysfs("show status error\n");
return 0;
}
hcd = platform_get_drvdata(pdev);
vhci_hcd = hcd_to_vhci_hcd(hcd);
vhci = vhci_hcd->vhci;
spin_lock_irqsave(&vhci->lock, flags);
for (i = 0; i < VHCI_HC_PORTS; i++) {
struct vhci_device *vdev = &vhci->vhci_hcd_hs->vdev[i];
spin_lock(&vdev->ud.lock);
port_show_vhci(&out, HUB_SPEED_HIGH,
pdev_nr * VHCI_PORTS + i, vdev);
spin_unlock(&vdev->ud.lock);
}
for (i = 0; i < VHCI_HC_PORTS; i++) {
struct vhci_device *vdev = &vhci->vhci_hcd_ss->vdev[i];
spin_lock(&vdev->ud.lock);
port_show_vhci(&out, HUB_SPEED_SUPER,
pdev_nr * VHCI_PORTS + VHCI_HC_PORTS + i, vdev);
spin_unlock(&vdev->ud.lock);
}
spin_unlock_irqrestore(&vhci->lock, flags);
return out - s;
}
static ssize_t status_show_not_ready(int pdev_nr, char *out)
{
char *s = out;
int i = 0;
for (i = 0; i < VHCI_HC_PORTS; i++) {
out += sprintf(out, "hs %04u %03u ",
(pdev_nr * VHCI_PORTS) + i,
VDEV_ST_NOTASSIGNED);
out += sprintf(out, "000 00000000 0000000000000000 0-0");
out += sprintf(out, "\n");
}
for (i = 0; i < VHCI_HC_PORTS; i++) {
out += sprintf(out, "ss %04u %03u ",
(pdev_nr * VHCI_PORTS) + VHCI_HC_PORTS + i,
VDEV_ST_NOTASSIGNED);
out += sprintf(out, "000 00000000 0000000000000000 0-0");
out += sprintf(out, "\n");
}
return out - s;
}
static int status_name_to_id(const char *name)
{
char *c;
long val;
int ret;
c = strchr(name, '.');
if (c == NULL)
return 0;
ret = kstrtol(c+1, 10, &val);
if (ret < 0)
return ret;
return val;
}
static ssize_t status_show(struct device *dev,
struct device_attribute *attr, char *out)
{
char *s = out;
int pdev_nr;
out += sprintf(out,
"hub port sta spd dev socket local_busid\n");
pdev_nr = status_name_to_id(attr->attr.name);
if (pdev_nr < 0)
out += status_show_not_ready(pdev_nr, out);
else
out += status_show_vhci(pdev_nr, out);
return out - s;
}
static ssize_t nports_show(struct device *dev, struct device_attribute *attr,
char *out)
{
char *s = out;
/*
* Half the ports are for SPEED_HIGH and half for SPEED_SUPER, thus the * 2.
*/
out += sprintf(out, "%d\n", VHCI_PORTS * vhci_num_controllers);
return out - s;
}
static DEVICE_ATTR_RO(nports);
/* Sysfs entry to shutdown a virtual connection */
static int vhci_port_disconnect(struct vhci_hcd *vhci_hcd, __u32 rhport)
{
struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
struct vhci *vhci = vhci_hcd->vhci;
unsigned long flags;
usbip_dbg_vhci_sysfs("enter\n");
/* lock */
spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->ud.lock);
if (vdev->ud.status == VDEV_ST_NULL) {
pr_err("not connected %d\n", vdev->ud.status);
/* unlock */
spin_unlock(&vdev->ud.lock);
spin_unlock_irqrestore(&vhci->lock, flags);
return -EINVAL;
}
/* unlock */
spin_unlock(&vdev->ud.lock);
spin_unlock_irqrestore(&vhci->lock, flags);
usbip_event_add(&vdev->ud, VDEV_EVENT_DOWN);
return 0;
}
static int valid_port(__u32 pdev_nr, __u32 rhport)
{
if (pdev_nr >= vhci_num_controllers) {
pr_err("pdev %u\n", pdev_nr);
return 0;
}
if (rhport >= VHCI_HC_PORTS) {
pr_err("rhport %u\n", rhport);
return 0;
}
return 1;
}
static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
__u32 port = 0, pdev_nr = 0, rhport = 0;
struct usb_hcd *hcd;
struct vhci_hcd *vhci_hcd;
int ret;
if (kstrtoint(buf, 10, &port) < 0)
return -EINVAL;
pdev_nr = port_to_pdev_nr(port);
rhport = port_to_rhport(port);
if (!valid_port(pdev_nr, rhport))
return -EINVAL;
hcd = platform_get_drvdata(vhcis[pdev_nr].pdev);
if (hcd == NULL) {
dev_err(dev, "port is not ready %u\n", port);
return -EAGAIN;
}
usbip_dbg_vhci_sysfs("rhport %d\n", rhport);
if ((port / VHCI_HC_PORTS) % 2)
vhci_hcd = hcd_to_vhci_hcd(hcd)->vhci->vhci_hcd_ss;
else
vhci_hcd = hcd_to_vhci_hcd(hcd)->vhci->vhci_hcd_hs;
ret = vhci_port_disconnect(vhci_hcd, rhport);
if (ret < 0)
return -EINVAL;
usbip_dbg_vhci_sysfs("Leave\n");
return count;
}
static DEVICE_ATTR(detach, S_IWUSR, NULL, store_detach);
static int valid_args(__u32 pdev_nr, __u32 rhport, enum usb_device_speed speed)
{
if (!valid_port(pdev_nr, rhport)) {
return 0;
}
switch (speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
case USB_SPEED_WIRELESS:
case USB_SPEED_SUPER:
break;
default:
pr_err("Failed attach request for unsupported USB speed: %s\n",
usb_speed_string(speed));
return 0;
}
return 1;
}
/* Sysfs entry to establish a virtual connection */
/*
* To start a new USB/IP attachment, a userland program needs to setup a TCP
* connection and then write its socket descriptor with remote device
* information into this sysfs file.
*
* A remote device is virtually attached to the root-hub port of @rhport with
* @speed. @devid is embedded into a request to specify the remote device in a
* server host.
*
* write() returns 0 on success, else negative errno.
*/
static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct socket *socket;
int sockfd = 0;
__u32 port = 0, pdev_nr = 0, rhport = 0, devid = 0, speed = 0;
struct usb_hcd *hcd;
struct vhci_hcd *vhci_hcd;
struct vhci_device *vdev;
struct vhci *vhci;
int err;
unsigned long flags;
/*
* @rhport: port number of vhci_hcd
* @sockfd: socket descriptor of an established TCP connection
* @devid: unique device identifier in a remote host
* @speed: usb device speed in a remote host
*/
if (sscanf(buf, "%u %u %u %u", &port, &sockfd, &devid, &speed) != 4)
return -EINVAL;
pdev_nr = port_to_pdev_nr(port);
rhport = port_to_rhport(port);
usbip_dbg_vhci_sysfs("port(%u) pdev(%d) rhport(%u)\n",
port, pdev_nr, rhport);
usbip_dbg_vhci_sysfs("sockfd(%u) devid(%u) speed(%u)\n",
sockfd, devid, speed);
/* check received parameters */
if (!valid_args(pdev_nr, rhport, speed))
return -EINVAL;
hcd = platform_get_drvdata(vhcis[pdev_nr].pdev);
if (hcd == NULL) {
dev_err(dev, "port %d is not ready\n", port);
return -EAGAIN;
}
vhci_hcd = hcd_to_vhci_hcd(hcd);
vhci = vhci_hcd->vhci;
if (speed == USB_SPEED_SUPER)
vdev = &vhci->vhci_hcd_ss->vdev[rhport];
else
vdev = &vhci->vhci_hcd_hs->vdev[rhport];
/* Extract socket from fd. */
socket = sockfd_lookup(sockfd, &err);
if (!socket)
return -EINVAL;
/* now need lock until setting vdev status as used */
/* begin a lock */
spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->ud.lock);
if (vdev->ud.status != VDEV_ST_NULL) {
/* end of the lock */
spin_unlock(&vdev->ud.lock);
spin_unlock_irqrestore(&vhci->lock, flags);
sockfd_put(socket);
dev_err(dev, "port %d already used\n", rhport);
/*
* Will be retried from userspace
* if there's another free port.
*/
return -EBUSY;
}
dev_info(dev, "pdev(%u) rhport(%u) sockfd(%d)\n",
pdev_nr, rhport, sockfd);
dev_info(dev, "devid(%u) speed(%u) speed_str(%s)\n",
devid, speed, usb_speed_string(speed));
vdev->devid = devid;
vdev->speed = speed;
vdev->ud.tcp_socket = socket;
vdev->ud.status = VDEV_ST_NOTASSIGNED;
spin_unlock(&vdev->ud.lock);
spin_unlock_irqrestore(&vhci->lock, flags);
/* end the lock */
vdev->ud.tcp_rx = kthread_get_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
vdev->ud.tcp_tx = kthread_get_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
rh_port_connect(vdev, speed);
return count;
}
static DEVICE_ATTR(attach, S_IWUSR, NULL, store_attach);
#define MAX_STATUS_NAME 16
struct status_attr {
struct device_attribute attr;
char name[MAX_STATUS_NAME+1];
};
static struct status_attr *status_attrs;
static void set_status_attr(int id)
{
struct status_attr *status;
status = status_attrs + id;
if (id == 0)
strcpy(status->name, "status");
else
snprintf(status->name, MAX_STATUS_NAME+1, "status.%d", id);
status->attr.attr.name = status->name;
status->attr.attr.mode = S_IRUGO;
status->attr.show = status_show;
sysfs_attr_init(&status->attr.attr);
}
static int init_status_attrs(void)
{
int id;
status_attrs = kcalloc(vhci_num_controllers, sizeof(struct status_attr),
GFP_KERNEL);
if (status_attrs == NULL)
return -ENOMEM;
for (id = 0; id < vhci_num_controllers; id++)
set_status_attr(id);
return 0;
}
static void finish_status_attrs(void)
{
kfree(status_attrs);
}
struct attribute_group vhci_attr_group = {
.attrs = NULL,
};
int vhci_init_attr_group(void)
{
struct attribute **attrs;
int ret, i;
attrs = kcalloc((vhci_num_controllers + 5), sizeof(struct attribute *),
GFP_KERNEL);
if (attrs == NULL)
return -ENOMEM;
ret = init_status_attrs();
if (ret) {
kfree(attrs);
return ret;
}
*attrs = &dev_attr_nports.attr;
*(attrs + 1) = &dev_attr_detach.attr;
*(attrs + 2) = &dev_attr_attach.attr;
*(attrs + 3) = &dev_attr_usbip_debug.attr;
for (i = 0; i < vhci_num_controllers; i++)
*(attrs + i + 4) = &((status_attrs + i)->attr.attr);
vhci_attr_group.attrs = attrs;
return 0;
}
void vhci_finish_attr_group(void)
{
finish_status_attrs();
kfree(vhci_attr_group.attrs);
}