mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 02:39:48 +00:00
![Arnd Bergmann](/assets/img/avatar_default.png)
* rationalization of con_id names for phy clocks to make DT conversion easy * A patch to move away from syscon as platform device. This is needed for common clock framework conversion as well as helps get rid of syscon_regmap_lookup_by_pdevname() by removing the last known user. * convert mach-davinci to use reset support available in watchdog driver * a non-critical warning fix. It has been around since beginning so not sending as a standalone fix for -rc cycle. * moving mach-davinci clock init to .init_time() for legacy boot. This is again in preparation for CCF conversion. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJalPjTAAoJEGFBu2jqvgRNHwcP+gP6U9YQd7txyFy0bv73nTfu wn9ebJSWwzGruqMHO3ZhpC6MI0cKxIZ3mJbfADs/y/5Ha73sT06D3ajZT/+/Ij68 Pm9bgvEail+P2rhevBqiKShdTWMFcbSy35RF+O0u9o446lVRFDNtEuoyb2OToA1F Q+dvuDNzVASxFsOI+hgPkyfol4LkazPWvI3KrOjHhZBi7Nf2d+/03/vI4JhsnCjc BhPDfbrAodubpxhGqTOT9MHuTHvGOxrKp73OajdPgn+Z1na0U4XbMapshnaQQH0K fNU4SO92qVv7ElgQVPNknVS9x3/vpI1024HIpxcHEPYPV+akl947AXlmpprX98Jx 8Cb2xVnY8FCYxuQsMCKrmt/gM0dDYLg9S+mo94hkZYNoWqoZvtc64uZE+IxiyLEw z3IAtoC2+D+6VL66gnoMUsVGxkkcj16E3O6p0NKLLJhMqpZdsm9yvRupohEU8Y+6 z+XipvnR+P/fEt6m7paM8uKcm/fGlRBLr77GIJR86o4gPKSSHT5vpxqvab51Adl3 lXreP0ZlwXmOlU6tRffHPqHj6agBTalOHr7vSd7QRma/AotNcLkwJ+8rzNNgUjfa jJS72/AJONHsFDyjtbUWQFNPcu7sWNbzE7FoXDQJyd2vdivhiL0TyrEONGpynA2Z drZUuRS1Y6BCHqWRrCq7 =2MBq -----END PGP SIGNATURE----- Merge tag 'davinci-for-v4.17/soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc Pull "Miscellaneous DaVinci SoC support improvements for v4.17" from Sekhar Nori: * rationalization of con_id names for phy clocks to make DT conversion easy * A patch to move away from syscon as platform device. This is needed for common clock framework conversion as well as helps get rid of syscon_regmap_lookup_by_pdevname() by removing the last known user. * convert mach-davinci to use reset support available in watchdog driver * a non-critical warning fix. It has been around since beginning so not sending as a standalone fix for -rc cycle. * moving mach-davinci clock init to .init_time() for legacy boot. This is again in preparation for CCF conversion. * tag 'davinci-for-v4.17/soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: move davinci_clk_init() to init_time ARM: davinci: board-da830-evm: fix unused const variable warning ARM: davinci: remove watchdog reset ARM: da8xx: use platform data for CFGCHIP syscon regmap phy: da8xx-usb: rename clock con_ids
782 lines
18 KiB
C
782 lines
18 KiB
C
/*
|
|
* TI DaVinci DM365 EVM board support
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments Incorporated
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_data/at24.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
#include <linux/input.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/eeprom.h>
|
|
#include <linux/v4l2-dv-timings.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <mach/mux.h>
|
|
#include <mach/common.h>
|
|
#include <linux/platform_data/i2c-davinci.h>
|
|
#include <mach/serial.h>
|
|
#include <linux/platform_data/mmc-davinci.h>
|
|
#include <linux/platform_data/mtd-davinci.h>
|
|
#include <linux/platform_data/keyscan-davinci.h>
|
|
|
|
#include <media/i2c/ths7303.h>
|
|
#include <media/i2c/tvp514x.h>
|
|
|
|
#include "davinci.h"
|
|
|
|
static inline int have_imager(void)
|
|
{
|
|
/* REVISIT when it's supported, trigger via Kconfig */
|
|
return 0;
|
|
}
|
|
|
|
static inline int have_tvp7002(void)
|
|
{
|
|
/* REVISIT when it's supported, trigger via Kconfig */
|
|
return 0;
|
|
}
|
|
|
|
#define DM365_EVM_PHY_ID "davinci_mdio-0:01"
|
|
/*
|
|
* A MAX-II CPLD is used for various board control functions.
|
|
*/
|
|
#define CPLD_OFFSET(a13a8,a2a1) (((a13a8) << 10) + ((a2a1) << 3))
|
|
|
|
#define CPLD_VERSION CPLD_OFFSET(0,0) /* r/o */
|
|
#define CPLD_TEST CPLD_OFFSET(0,1)
|
|
#define CPLD_LEDS CPLD_OFFSET(0,2)
|
|
#define CPLD_MUX CPLD_OFFSET(0,3)
|
|
#define CPLD_SWITCH CPLD_OFFSET(1,0) /* r/o */
|
|
#define CPLD_POWER CPLD_OFFSET(1,1)
|
|
#define CPLD_VIDEO CPLD_OFFSET(1,2)
|
|
#define CPLD_CARDSTAT CPLD_OFFSET(1,3) /* r/o */
|
|
|
|
#define CPLD_DILC_OUT CPLD_OFFSET(2,0)
|
|
#define CPLD_DILC_IN CPLD_OFFSET(2,1) /* r/o */
|
|
|
|
#define CPLD_IMG_DIR0 CPLD_OFFSET(2,2)
|
|
#define CPLD_IMG_MUX0 CPLD_OFFSET(2,3)
|
|
#define CPLD_IMG_MUX1 CPLD_OFFSET(3,0)
|
|
#define CPLD_IMG_DIR1 CPLD_OFFSET(3,1)
|
|
#define CPLD_IMG_MUX2 CPLD_OFFSET(3,2)
|
|
#define CPLD_IMG_MUX3 CPLD_OFFSET(3,3)
|
|
#define CPLD_IMG_DIR2 CPLD_OFFSET(4,0)
|
|
#define CPLD_IMG_MUX4 CPLD_OFFSET(4,1)
|
|
#define CPLD_IMG_MUX5 CPLD_OFFSET(4,2)
|
|
|
|
#define CPLD_RESETS CPLD_OFFSET(4,3)
|
|
|
|
#define CPLD_CCD_DIR1 CPLD_OFFSET(0x3e,0)
|
|
#define CPLD_CCD_IO1 CPLD_OFFSET(0x3e,1)
|
|
#define CPLD_CCD_DIR2 CPLD_OFFSET(0x3e,2)
|
|
#define CPLD_CCD_IO2 CPLD_OFFSET(0x3e,3)
|
|
#define CPLD_CCD_DIR3 CPLD_OFFSET(0x3f,0)
|
|
#define CPLD_CCD_IO3 CPLD_OFFSET(0x3f,1)
|
|
|
|
static void __iomem *cpld;
|
|
|
|
|
|
/* NOTE: this is geared for the standard config, with a socketed
|
|
* 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
|
|
* swap chips with a different block size, partitioning will
|
|
* need to be changed. This NAND chip MT29F16G08FAA is the default
|
|
* NAND shipped with the Spectrum Digital DM365 EVM
|
|
*/
|
|
#define NAND_BLOCK_SIZE SZ_128K
|
|
|
|
static struct mtd_partition davinci_nand_partitions[] = {
|
|
{
|
|
/* UBL (a few copies) plus U-Boot */
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = 30 * NAND_BLOCK_SIZE,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
}, {
|
|
/* U-Boot environment */
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 2 * NAND_BLOCK_SIZE,
|
|
.mask_flags = 0,
|
|
}, {
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_4M,
|
|
.mask_flags = 0,
|
|
}, {
|
|
.name = "filesystem1",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_512M,
|
|
.mask_flags = 0,
|
|
}, {
|
|
.name = "filesystem2",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0,
|
|
}
|
|
/* two blocks with bad block table (and mirror) at the end */
|
|
};
|
|
|
|
static struct davinci_nand_pdata davinci_nand_data = {
|
|
.mask_chipsel = BIT(14),
|
|
.parts = davinci_nand_partitions,
|
|
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
|
|
.ecc_mode = NAND_ECC_HW,
|
|
.bbt_options = NAND_BBT_USE_FLASH,
|
|
.ecc_bits = 4,
|
|
};
|
|
|
|
static struct resource davinci_nand_resources[] = {
|
|
{
|
|
.start = DM365_ASYNC_EMIF_DATA_CE0_BASE,
|
|
.end = DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = DM365_ASYNC_EMIF_CONTROL_BASE,
|
|
.end = DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device davinci_nand_device = {
|
|
.name = "davinci_nand",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(davinci_nand_resources),
|
|
.resource = davinci_nand_resources,
|
|
.dev = {
|
|
.platform_data = &davinci_nand_data,
|
|
},
|
|
};
|
|
|
|
static struct at24_platform_data eeprom_info = {
|
|
.byte_len = (256*1024) / 8,
|
|
.page_size = 64,
|
|
.flags = AT24_FLAG_ADDR16,
|
|
.setup = davinci_get_mac_addr,
|
|
.context = (void *)0x7f00,
|
|
};
|
|
|
|
static struct i2c_board_info i2c_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("24c256", 0x50),
|
|
.platform_data = &eeprom_info,
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("tlv320aic3x", 0x18),
|
|
},
|
|
};
|
|
|
|
static struct davinci_i2c_platform_data i2c_pdata = {
|
|
.bus_freq = 400 /* kHz */,
|
|
.bus_delay = 0 /* usec */,
|
|
};
|
|
|
|
static int dm365evm_keyscan_enable(struct device *dev)
|
|
{
|
|
return davinci_cfg_reg(DM365_KEYSCAN);
|
|
}
|
|
|
|
static unsigned short dm365evm_keymap[] = {
|
|
KEY_KP2,
|
|
KEY_LEFT,
|
|
KEY_EXIT,
|
|
KEY_DOWN,
|
|
KEY_ENTER,
|
|
KEY_UP,
|
|
KEY_KP1,
|
|
KEY_RIGHT,
|
|
KEY_MENU,
|
|
KEY_RECORD,
|
|
KEY_REWIND,
|
|
KEY_KPMINUS,
|
|
KEY_STOP,
|
|
KEY_FASTFORWARD,
|
|
KEY_KPPLUS,
|
|
KEY_PLAYPAUSE,
|
|
0
|
|
};
|
|
|
|
static struct davinci_ks_platform_data dm365evm_ks_data = {
|
|
.device_enable = dm365evm_keyscan_enable,
|
|
.keymap = dm365evm_keymap,
|
|
.keymapsize = ARRAY_SIZE(dm365evm_keymap),
|
|
.rep = 1,
|
|
/* Scan period = strobe + interval */
|
|
.strobe = 0x5,
|
|
.interval = 0x2,
|
|
.matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4,
|
|
};
|
|
|
|
static int cpld_mmc_get_cd(int module)
|
|
{
|
|
if (!cpld)
|
|
return -ENXIO;
|
|
|
|
/* low == card present */
|
|
return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
|
|
}
|
|
|
|
static int cpld_mmc_get_ro(int module)
|
|
{
|
|
if (!cpld)
|
|
return -ENXIO;
|
|
|
|
/* high == card's write protect switch active */
|
|
return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
|
|
}
|
|
|
|
static struct davinci_mmc_config dm365evm_mmc_config = {
|
|
.get_cd = cpld_mmc_get_cd,
|
|
.get_ro = cpld_mmc_get_ro,
|
|
.wires = 4,
|
|
.max_freq = 50000000,
|
|
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
|
|
};
|
|
|
|
static void dm365evm_emac_configure(void)
|
|
{
|
|
/*
|
|
* EMAC pins are multiplexed with GPIO and UART
|
|
* Further details are available at the DM365 ARM
|
|
* Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
|
|
*/
|
|
davinci_cfg_reg(DM365_EMAC_TX_EN);
|
|
davinci_cfg_reg(DM365_EMAC_TX_CLK);
|
|
davinci_cfg_reg(DM365_EMAC_COL);
|
|
davinci_cfg_reg(DM365_EMAC_TXD3);
|
|
davinci_cfg_reg(DM365_EMAC_TXD2);
|
|
davinci_cfg_reg(DM365_EMAC_TXD1);
|
|
davinci_cfg_reg(DM365_EMAC_TXD0);
|
|
davinci_cfg_reg(DM365_EMAC_RXD3);
|
|
davinci_cfg_reg(DM365_EMAC_RXD2);
|
|
davinci_cfg_reg(DM365_EMAC_RXD1);
|
|
davinci_cfg_reg(DM365_EMAC_RXD0);
|
|
davinci_cfg_reg(DM365_EMAC_RX_CLK);
|
|
davinci_cfg_reg(DM365_EMAC_RX_DV);
|
|
davinci_cfg_reg(DM365_EMAC_RX_ER);
|
|
davinci_cfg_reg(DM365_EMAC_CRS);
|
|
davinci_cfg_reg(DM365_EMAC_MDIO);
|
|
davinci_cfg_reg(DM365_EMAC_MDCLK);
|
|
|
|
/*
|
|
* EMAC interrupts are multiplexed with GPIO interrupts
|
|
* Details are available at the DM365 ARM
|
|
* Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
|
|
*/
|
|
davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
|
|
davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
|
|
davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
|
|
davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
|
|
}
|
|
|
|
static void dm365evm_mmc_configure(void)
|
|
{
|
|
/*
|
|
* MMC/SD pins are multiplexed with GPIO and EMIF
|
|
* Further details are available at the DM365 ARM
|
|
* Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
|
|
*/
|
|
davinci_cfg_reg(DM365_SD1_CLK);
|
|
davinci_cfg_reg(DM365_SD1_CMD);
|
|
davinci_cfg_reg(DM365_SD1_DATA3);
|
|
davinci_cfg_reg(DM365_SD1_DATA2);
|
|
davinci_cfg_reg(DM365_SD1_DATA1);
|
|
davinci_cfg_reg(DM365_SD1_DATA0);
|
|
}
|
|
|
|
static struct tvp514x_platform_data tvp5146_pdata = {
|
|
.clk_polarity = 0,
|
|
.hs_polarity = 1,
|
|
.vs_polarity = 1
|
|
};
|
|
|
|
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
|
|
/* Inputs available at the TVP5146 */
|
|
static struct v4l2_input tvp5146_inputs[] = {
|
|
{
|
|
.index = 0,
|
|
.name = "Composite",
|
|
.type = V4L2_INPUT_TYPE_CAMERA,
|
|
.std = TVP514X_STD_ALL,
|
|
},
|
|
{
|
|
.index = 1,
|
|
.name = "S-Video",
|
|
.type = V4L2_INPUT_TYPE_CAMERA,
|
|
.std = TVP514X_STD_ALL,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* this is the route info for connecting each input to decoder
|
|
* ouput that goes to vpfe. There is a one to one correspondence
|
|
* with tvp5146_inputs
|
|
*/
|
|
static struct vpfe_route tvp5146_routes[] = {
|
|
{
|
|
.input = INPUT_CVBS_VI2B,
|
|
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
|
|
},
|
|
{
|
|
.input = INPUT_SVIDEO_VI2C_VI1C,
|
|
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
|
|
},
|
|
};
|
|
|
|
static struct vpfe_subdev_info vpfe_sub_devs[] = {
|
|
{
|
|
.name = "tvp5146",
|
|
.grp_id = 0,
|
|
.num_inputs = ARRAY_SIZE(tvp5146_inputs),
|
|
.inputs = tvp5146_inputs,
|
|
.routes = tvp5146_routes,
|
|
.can_route = 1,
|
|
.ccdc_if_params = {
|
|
.if_type = VPFE_BT656,
|
|
.hdpol = VPFE_PINPOL_POSITIVE,
|
|
.vdpol = VPFE_PINPOL_POSITIVE,
|
|
},
|
|
.board_info = {
|
|
I2C_BOARD_INFO("tvp5146", 0x5d),
|
|
.platform_data = &tvp5146_pdata,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct vpfe_config vpfe_cfg = {
|
|
.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
|
|
.sub_devs = vpfe_sub_devs,
|
|
.i2c_adapter_id = 1,
|
|
.card_name = "DM365 EVM",
|
|
.ccdc = "ISIF",
|
|
};
|
|
|
|
/* venc standards timings */
|
|
static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
|
|
{
|
|
.name = "ntsc",
|
|
.timings_type = VPBE_ENC_STD,
|
|
.std_id = V4L2_STD_NTSC,
|
|
.interlaced = 1,
|
|
.xres = 720,
|
|
.yres = 480,
|
|
.aspect = {11, 10},
|
|
.fps = {30000, 1001},
|
|
.left_margin = 0x79,
|
|
.upper_margin = 0x10,
|
|
},
|
|
{
|
|
.name = "pal",
|
|
.timings_type = VPBE_ENC_STD,
|
|
.std_id = V4L2_STD_PAL,
|
|
.interlaced = 1,
|
|
.xres = 720,
|
|
.yres = 576,
|
|
.aspect = {54, 59},
|
|
.fps = {25, 1},
|
|
.left_margin = 0x7E,
|
|
.upper_margin = 0x16,
|
|
},
|
|
};
|
|
|
|
/* venc dv timings */
|
|
static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
|
|
{
|
|
.name = "480p59_94",
|
|
.timings_type = VPBE_ENC_DV_TIMINGS,
|
|
.dv_timings = V4L2_DV_BT_CEA_720X480P59_94,
|
|
.interlaced = 0,
|
|
.xres = 720,
|
|
.yres = 480,
|
|
.aspect = {1, 1},
|
|
.fps = {5994, 100},
|
|
.left_margin = 0x8F,
|
|
.upper_margin = 0x2D,
|
|
},
|
|
{
|
|
.name = "576p50",
|
|
.timings_type = VPBE_ENC_DV_TIMINGS,
|
|
.dv_timings = V4L2_DV_BT_CEA_720X576P50,
|
|
.interlaced = 0,
|
|
.xres = 720,
|
|
.yres = 576,
|
|
.aspect = {1, 1},
|
|
.fps = {50, 1},
|
|
.left_margin = 0x8C,
|
|
.upper_margin = 0x36,
|
|
},
|
|
{
|
|
.name = "720p60",
|
|
.timings_type = VPBE_ENC_DV_TIMINGS,
|
|
.dv_timings = V4L2_DV_BT_CEA_1280X720P60,
|
|
.interlaced = 0,
|
|
.xres = 1280,
|
|
.yres = 720,
|
|
.aspect = {1, 1},
|
|
.fps = {60, 1},
|
|
.left_margin = 0x117,
|
|
.right_margin = 70,
|
|
.upper_margin = 38,
|
|
.lower_margin = 3,
|
|
.hsync_len = 80,
|
|
.vsync_len = 5,
|
|
},
|
|
{
|
|
.name = "1080i60",
|
|
.timings_type = VPBE_ENC_DV_TIMINGS,
|
|
.dv_timings = V4L2_DV_BT_CEA_1920X1080I60,
|
|
.interlaced = 1,
|
|
.xres = 1920,
|
|
.yres = 1080,
|
|
.aspect = {1, 1},
|
|
.fps = {30, 1},
|
|
.left_margin = 0xc9,
|
|
.right_margin = 80,
|
|
.upper_margin = 30,
|
|
.lower_margin = 3,
|
|
.hsync_len = 88,
|
|
.vsync_len = 5,
|
|
},
|
|
};
|
|
|
|
#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
|
|
|
|
/*
|
|
* The outputs available from VPBE + ecnoders. Keep the
|
|
* the order same as that of encoders. First those from venc followed by that
|
|
* from encoders. Index in the output refers to index on a particular
|
|
* encoder.Driver uses this index to pass it to encoder when it supports more
|
|
* than one output. Application uses index of the array to set an output.
|
|
*/
|
|
static struct vpbe_output dm365evm_vpbe_outputs[] = {
|
|
{
|
|
.output = {
|
|
.index = 0,
|
|
.name = "Composite",
|
|
.type = V4L2_OUTPUT_TYPE_ANALOG,
|
|
.std = VENC_STD_ALL,
|
|
.capabilities = V4L2_OUT_CAP_STD,
|
|
},
|
|
.subdev_name = DM365_VPBE_VENC_SUBDEV_NAME,
|
|
.default_mode = "ntsc",
|
|
.num_modes = ARRAY_SIZE(dm365evm_enc_std_timing),
|
|
.modes = dm365evm_enc_std_timing,
|
|
.if_params = MEDIA_BUS_FMT_FIXED,
|
|
},
|
|
{
|
|
.output = {
|
|
.index = 1,
|
|
.name = "Component",
|
|
.type = V4L2_OUTPUT_TYPE_ANALOG,
|
|
.capabilities = V4L2_OUT_CAP_DV_TIMINGS,
|
|
},
|
|
.subdev_name = DM365_VPBE_VENC_SUBDEV_NAME,
|
|
.default_mode = "480p59_94",
|
|
.num_modes = ARRAY_SIZE(dm365evm_enc_preset_timing),
|
|
.modes = dm365evm_enc_preset_timing,
|
|
.if_params = MEDIA_BUS_FMT_FIXED,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Amplifiers on the board
|
|
*/
|
|
static struct ths7303_platform_data ths7303_pdata = {
|
|
.ch_1 = 3,
|
|
.ch_2 = 3,
|
|
.ch_3 = 3,
|
|
};
|
|
|
|
static struct amp_config_info vpbe_amp = {
|
|
.module_name = "ths7303",
|
|
.is_i2c = 1,
|
|
.board_info = {
|
|
I2C_BOARD_INFO("ths7303", 0x2c),
|
|
.platform_data = &ths7303_pdata,
|
|
}
|
|
};
|
|
|
|
static struct vpbe_config dm365evm_display_cfg = {
|
|
.module_name = "dm365-vpbe-display",
|
|
.i2c_adapter_id = 1,
|
|
.amp = &vpbe_amp,
|
|
.osd = {
|
|
.module_name = DM365_VPBE_OSD_SUBDEV_NAME,
|
|
},
|
|
.venc = {
|
|
.module_name = DM365_VPBE_VENC_SUBDEV_NAME,
|
|
},
|
|
.num_outputs = ARRAY_SIZE(dm365evm_vpbe_outputs),
|
|
.outputs = dm365evm_vpbe_outputs,
|
|
};
|
|
|
|
static void __init evm_init_i2c(void)
|
|
{
|
|
davinci_init_i2c(&i2c_pdata);
|
|
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
|
|
}
|
|
|
|
static struct platform_device *dm365_evm_nand_devices[] __initdata = {
|
|
&davinci_nand_device,
|
|
};
|
|
|
|
static inline int have_leds(void)
|
|
{
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
return 1;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
struct cpld_led {
|
|
struct led_classdev cdev;
|
|
u8 mask;
|
|
};
|
|
|
|
static const struct {
|
|
const char *name;
|
|
const char *trigger;
|
|
} cpld_leds[] = {
|
|
{ "dm365evm::ds2", },
|
|
{ "dm365evm::ds3", },
|
|
{ "dm365evm::ds4", },
|
|
{ "dm365evm::ds5", },
|
|
{ "dm365evm::ds6", "nand-disk", },
|
|
{ "dm365evm::ds7", "mmc1", },
|
|
{ "dm365evm::ds8", "mmc0", },
|
|
{ "dm365evm::ds9", "heartbeat", },
|
|
};
|
|
|
|
static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
|
|
{
|
|
struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
|
|
u8 reg = __raw_readb(cpld + CPLD_LEDS);
|
|
|
|
if (b != LED_OFF)
|
|
reg &= ~led->mask;
|
|
else
|
|
reg |= led->mask;
|
|
__raw_writeb(reg, cpld + CPLD_LEDS);
|
|
}
|
|
|
|
static enum led_brightness cpld_led_get(struct led_classdev *cdev)
|
|
{
|
|
struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
|
|
u8 reg = __raw_readb(cpld + CPLD_LEDS);
|
|
|
|
return (reg & led->mask) ? LED_OFF : LED_FULL;
|
|
}
|
|
|
|
static int __init cpld_leds_init(void)
|
|
{
|
|
int i;
|
|
|
|
if (!have_leds() || !cpld)
|
|
return 0;
|
|
|
|
/* setup LEDs */
|
|
__raw_writeb(0xff, cpld + CPLD_LEDS);
|
|
for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
|
|
struct cpld_led *led;
|
|
|
|
led = kzalloc(sizeof(*led), GFP_KERNEL);
|
|
if (!led)
|
|
break;
|
|
|
|
led->cdev.name = cpld_leds[i].name;
|
|
led->cdev.brightness_set = cpld_led_set;
|
|
led->cdev.brightness_get = cpld_led_get;
|
|
led->cdev.default_trigger = cpld_leds[i].trigger;
|
|
led->mask = BIT(i);
|
|
|
|
if (led_classdev_register(NULL, &led->cdev) < 0) {
|
|
kfree(led);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
/* run after subsys_initcall() for LEDs */
|
|
fs_initcall(cpld_leds_init);
|
|
|
|
|
|
static void __init evm_init_cpld(void)
|
|
{
|
|
u8 mux, resets;
|
|
const char *label;
|
|
struct clk *aemif_clk;
|
|
|
|
/* Make sure we can configure the CPLD through CS1. Then
|
|
* leave it on for later access to MMC and LED registers.
|
|
*/
|
|
aemif_clk = clk_get(NULL, "aemif");
|
|
if (IS_ERR(aemif_clk))
|
|
return;
|
|
clk_prepare_enable(aemif_clk);
|
|
|
|
if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
|
|
"cpld") == NULL)
|
|
goto fail;
|
|
cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
|
|
if (!cpld) {
|
|
release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
|
|
SECTION_SIZE);
|
|
fail:
|
|
pr_err("ERROR: can't map CPLD\n");
|
|
clk_disable_unprepare(aemif_clk);
|
|
return;
|
|
}
|
|
|
|
/* External muxing for some signals */
|
|
mux = 0;
|
|
|
|
/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
|
|
* NOTE: SW4 bus width setting must match!
|
|
*/
|
|
if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
|
|
/* external keypad mux */
|
|
mux |= BIT(7);
|
|
|
|
platform_add_devices(dm365_evm_nand_devices,
|
|
ARRAY_SIZE(dm365_evm_nand_devices));
|
|
} else {
|
|
/* no OneNAND support yet */
|
|
}
|
|
|
|
/* Leave external chips in reset when unused. */
|
|
resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
|
|
|
|
/* Static video input config with SN74CBT16214 1-of-3 mux:
|
|
* - port b1 == tvp7002 (mux lowbits == 1 or 6)
|
|
* - port b2 == imager (mux lowbits == 2 or 7)
|
|
* - port b3 == tvp5146 (mux lowbits == 5)
|
|
*
|
|
* Runtime switching could work too, with limitations.
|
|
*/
|
|
if (have_imager()) {
|
|
label = "HD imager";
|
|
mux |= 2;
|
|
|
|
/* externally mux MMC1/ENET/AIC33 to imager */
|
|
mux |= BIT(6) | BIT(5) | BIT(3);
|
|
} else {
|
|
struct davinci_soc_info *soc_info = &davinci_soc_info;
|
|
|
|
/* we can use MMC1 ... */
|
|
dm365evm_mmc_configure();
|
|
davinci_setup_mmc(1, &dm365evm_mmc_config);
|
|
|
|
/* ... and ENET ... */
|
|
dm365evm_emac_configure();
|
|
soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
|
|
resets &= ~BIT(3);
|
|
|
|
/* ... and AIC33 */
|
|
resets &= ~BIT(1);
|
|
|
|
if (have_tvp7002()) {
|
|
mux |= 1;
|
|
resets &= ~BIT(2);
|
|
label = "tvp7002 HD";
|
|
} else {
|
|
/* default to tvp5146 */
|
|
mux |= 5;
|
|
resets &= ~BIT(0);
|
|
label = "tvp5146 SD";
|
|
}
|
|
}
|
|
__raw_writeb(mux, cpld + CPLD_MUX);
|
|
__raw_writeb(resets, cpld + CPLD_RESETS);
|
|
pr_info("EVM: %s video input\n", label);
|
|
|
|
/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
|
|
}
|
|
|
|
static void __init dm365_evm_map_io(void)
|
|
{
|
|
dm365_init();
|
|
}
|
|
|
|
static struct spi_eeprom at25640 = {
|
|
.byte_len = SZ_64K / 8,
|
|
.name = "at25640",
|
|
.page_size = 32,
|
|
.flags = EE_ADDR2,
|
|
};
|
|
|
|
static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
|
|
{
|
|
.modalias = "at25",
|
|
.platform_data = &at25640,
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.mode = SPI_MODE_0,
|
|
},
|
|
};
|
|
|
|
static __init void dm365_evm_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = dm365_gpio_register();
|
|
if (ret)
|
|
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
|
|
|
|
evm_init_i2c();
|
|
davinci_serial_init(dm365_serial_device);
|
|
|
|
dm365evm_emac_configure();
|
|
dm365evm_mmc_configure();
|
|
|
|
davinci_setup_mmc(0, &dm365evm_mmc_config);
|
|
|
|
dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
|
|
|
|
/* maybe setup mmc1/etc ... _after_ mmc0 */
|
|
evm_init_cpld();
|
|
|
|
#ifdef CONFIG_SND_DM365_AIC3X_CODEC
|
|
dm365_init_asp();
|
|
#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
|
|
dm365_init_vc();
|
|
#endif
|
|
dm365_init_rtc();
|
|
dm365_init_ks(&dm365evm_ks_data);
|
|
|
|
dm365_init_spi0(BIT(0), dm365_evm_spi_info,
|
|
ARRAY_SIZE(dm365_evm_spi_info));
|
|
}
|
|
|
|
MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
|
|
.atag_offset = 0x100,
|
|
.map_io = dm365_evm_map_io,
|
|
.init_irq = davinci_irq_init,
|
|
.init_time = dm365_init_time,
|
|
.init_machine = dm365_evm_init,
|
|
.init_late = davinci_init_late,
|
|
.dma_zone_size = SZ_128M,
|
|
MACHINE_END
|
|
|