mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Arnd Bergmann](/assets/img/avatar_default.png)
We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
243 lines
5.1 KiB
C
243 lines
5.1 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/gumstix.c
|
|
*
|
|
* Support for the Gumstix motherboards.
|
|
*
|
|
* Original Author: Craig Hughes
|
|
* Created: Feb 14, 2008
|
|
* Copyright: Craig Hughes
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Implemented based on lubbock.c by Nicolas Pitre and code from Craig
|
|
* Hughes
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/usb/gpio_vbus.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include "pxa25x.h"
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include "udc.h"
|
|
#include "gumstix.h"
|
|
|
|
#include "generic.h"
|
|
|
|
static struct resource flash_resource = {
|
|
.start = 0x00000000,
|
|
.end = SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct mtd_partition gumstix_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
} , {
|
|
.name = "rootfs",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data gumstix_flash_data = {
|
|
.map_name = "cfi_probe",
|
|
.parts = gumstix_partitions,
|
|
.nr_parts = ARRAY_SIZE(gumstix_partitions),
|
|
.width = 2,
|
|
};
|
|
|
|
static struct platform_device gumstix_flash_device = {
|
|
.name = "pxa2xx-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &gumstix_flash_data,
|
|
},
|
|
.resource = &flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&gumstix_flash_device,
|
|
};
|
|
|
|
#ifdef CONFIG_MMC_PXA
|
|
static struct pxamci_platform_data gumstix_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.gpio_card_detect = -1,
|
|
.gpio_card_ro = -1,
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static void __init gumstix_mmc_init(void)
|
|
{
|
|
pxa_set_mci_info(&gumstix_mci_platform_data);
|
|
}
|
|
#else
|
|
static void __init gumstix_mmc_init(void)
|
|
{
|
|
pr_debug("Gumstix mmc disabled\n");
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_PXA25X
|
|
static struct gpio_vbus_mach_info gumstix_udc_info = {
|
|
.gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
|
|
.gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
|
|
};
|
|
|
|
static struct platform_device gumstix_gpio_vbus = {
|
|
.name = "gpio-vbus",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &gumstix_udc_info,
|
|
},
|
|
};
|
|
|
|
static void __init gumstix_udc_init(void)
|
|
{
|
|
platform_device_register(&gumstix_gpio_vbus);
|
|
}
|
|
#else
|
|
static void gumstix_udc_init(void)
|
|
{
|
|
pr_debug("Gumstix udc is disabled\n");
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BT
|
|
/* Normally, the bootloader would have enabled this 32kHz clock but many
|
|
** boards still have u-boot 1.1.4 so we check if it has been turned on and
|
|
** if not, we turn it on with a warning message. */
|
|
static void gumstix_setup_bt_clock(void)
|
|
{
|
|
int timeout = 500;
|
|
|
|
if (!(readl(OSCC) & OSCC_OOK))
|
|
pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
|
|
else
|
|
return;
|
|
|
|
writel(readl(OSCC) | OSCC_OON, OSCC);
|
|
do {
|
|
if (readl(OSCC) & OSCC_OOK)
|
|
break;
|
|
udelay(1);
|
|
} while (--timeout);
|
|
if (!timeout)
|
|
pr_err("Failed to start 32kHz clock\n");
|
|
}
|
|
|
|
static void __init gumstix_bluetooth_init(void)
|
|
{
|
|
int err;
|
|
|
|
gumstix_setup_bt_clock();
|
|
|
|
err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
|
|
if (err) {
|
|
pr_err("gumstix: failed request gpio for bluetooth reset\n");
|
|
return;
|
|
}
|
|
|
|
err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
|
|
if (err) {
|
|
pr_err("gumstix: can't reset bluetooth\n");
|
|
return;
|
|
}
|
|
gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
|
|
udelay(100);
|
|
gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
|
|
}
|
|
#else
|
|
static void gumstix_bluetooth_init(void)
|
|
{
|
|
pr_debug("Gumstix Bluetooth is disabled\n");
|
|
}
|
|
#endif
|
|
|
|
static unsigned long gumstix_pin_config[] __initdata = {
|
|
GPIO12_32KHz,
|
|
/* BTUART */
|
|
GPIO42_HWUART_RXD,
|
|
GPIO43_HWUART_TXD,
|
|
GPIO44_HWUART_CTS,
|
|
GPIO45_HWUART_RTS,
|
|
/* MMC */
|
|
GPIO6_MMC_CLK,
|
|
GPIO53_MMC_CLK,
|
|
GPIO8_MMC_CS0,
|
|
};
|
|
|
|
int __attribute__((weak)) am200_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int __attribute__((weak)) am300_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void __init carrier_board_init(void)
|
|
{
|
|
/*
|
|
* put carrier/expansion board init here if
|
|
* they cannot be detected programatically
|
|
*/
|
|
am200_init();
|
|
am300_init();
|
|
}
|
|
|
|
static void __init gumstix_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
pxa_set_hwuart_info(NULL);
|
|
|
|
gumstix_bluetooth_init();
|
|
gumstix_udc_init();
|
|
gumstix_mmc_init();
|
|
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
carrier_board_init();
|
|
}
|
|
|
|
MACHINE_START(GUMSTIX, "Gumstix")
|
|
.atag_offset = 0x100, /* match u-boot bi_boot_params */
|
|
.map_io = pxa25x_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa25x_init_irq,
|
|
.handle_irq = pxa25x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = gumstix_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|