mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Miquel Raynal](/assets/img/avatar_default.png)
The "enable arbiter" bit is available only for pxa3xx based platforms but it was experimentally shown that even if this bit is reserved, some Marvell platforms (64-bit) actually need it to be set. The driver always set this bit regardless of this property, which is harmless. Then this property is not needed. The "num_cs" field is always 1 and for a good reason, the old driver (pxa3xx_nand.c) could only handle one. The new driver that replaces it (marvell_nand.c) can handle more, but better use device tree for such description. As there is only one available chip select, there is no need for an array of partitions neither an array of partition numbers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
443 lines
11 KiB
C
443 lines
11 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/zylonite.c
|
|
*
|
|
* Support for the PXA3xx Development Platform (aka Zylonite)
|
|
*
|
|
* Copyright (C) 2006 Marvell International Ltd.
|
|
*
|
|
* 2007-09-04: eric miao <eric.miao@marvell.com>
|
|
* rewrite to align with latest kernel
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/pwm_backlight.h>
|
|
#include <linux/smc91x.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include "pxa3xx.h"
|
|
#include <mach/audio.h>
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include "zylonite.h"
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <linux/platform_data/keypad-pxa27x.h>
|
|
#include <linux/platform_data/mtd-nand-pxa3xx.h>
|
|
|
|
#include "devices.h"
|
|
#include "generic.h"
|
|
|
|
int gpio_eth_irq;
|
|
int gpio_debug_led1;
|
|
int gpio_debug_led2;
|
|
|
|
int wm9713_irq;
|
|
|
|
int lcd_id;
|
|
int lcd_orientation;
|
|
|
|
struct platform_device pxa_device_wm9713_audio = {
|
|
.name = "wm9713-codec",
|
|
.id = -1,
|
|
};
|
|
|
|
static void __init zylonite_init_wm9713_audio(void)
|
|
{
|
|
platform_device_register(&pxa_device_wm9713_audio);
|
|
}
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = ZYLONITE_ETH_PHYS + 0x300,
|
|
.end = ZYLONITE_ETH_PHYS + 0xfffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = -1, /* for run-time assignment */
|
|
.end = -1,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct smc91x_platdata zylonite_smc91x_info = {
|
|
.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
|
|
SMC91X_NOWAIT | SMC91X_USE_DMA,
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
.dev = {
|
|
.platform_data = &zylonite_smc91x_info,
|
|
},
|
|
};
|
|
|
|
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
|
|
static struct gpio_led zylonite_debug_leds[] = {
|
|
[0] = {
|
|
.name = "zylonite:yellow:1",
|
|
.default_trigger = "heartbeat",
|
|
},
|
|
[1] = {
|
|
.name = "zylonite:yellow:2",
|
|
.default_trigger = "default-on",
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data zylonite_debug_leds_info = {
|
|
.leds = zylonite_debug_leds,
|
|
.num_leds = ARRAY_SIZE(zylonite_debug_leds),
|
|
};
|
|
|
|
static struct platform_device zylonite_device_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &zylonite_debug_leds_info,
|
|
}
|
|
};
|
|
|
|
static void __init zylonite_init_leds(void)
|
|
{
|
|
zylonite_debug_leds[0].gpio = gpio_debug_led1;
|
|
zylonite_debug_leds[1].gpio = gpio_debug_led2;
|
|
|
|
platform_device_register(&zylonite_device_leds);
|
|
}
|
|
#else
|
|
static inline void zylonite_init_leds(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
|
static struct pwm_lookup zylonite_pwm_lookup[] = {
|
|
PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
|
|
PWM_POLARITY_NORMAL),
|
|
};
|
|
|
|
static struct platform_pwm_backlight_data zylonite_backlight_data = {
|
|
.max_brightness = 100,
|
|
.dft_brightness = 100,
|
|
.enable_gpio = -1,
|
|
};
|
|
|
|
static struct platform_device zylonite_backlight_device = {
|
|
.name = "pwm-backlight",
|
|
.dev = {
|
|
.parent = &pxa27x_device_pwm1.dev,
|
|
.platform_data = &zylonite_backlight_data,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
|
|
.pixclock = 110000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.hsync_len = 4,
|
|
.left_margin = 6,
|
|
.right_margin = 4,
|
|
.vsync_len = 2,
|
|
.upper_margin = 2,
|
|
.lower_margin = 3,
|
|
.sync = FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
|
|
.pixclock = 50000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 1,
|
|
.left_margin = 0x9f,
|
|
.right_margin = 1,
|
|
.vsync_len = 44,
|
|
.upper_margin = 0,
|
|
.lower_margin = 0,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
};
|
|
|
|
static struct pxafb_mode_info sharp_ls037_modes[] = {
|
|
[0] = {
|
|
.pixclock = 158000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.hsync_len = 4,
|
|
.left_margin = 39,
|
|
.right_margin = 39,
|
|
.vsync_len = 1,
|
|
.upper_margin = 2,
|
|
.lower_margin = 3,
|
|
.sync = 0,
|
|
},
|
|
[1] = {
|
|
.pixclock = 39700,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.bpp = 16,
|
|
.hsync_len = 8,
|
|
.left_margin = 81,
|
|
.right_margin = 81,
|
|
.vsync_len = 1,
|
|
.upper_margin = 2,
|
|
.lower_margin = 7,
|
|
.sync = 0,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info zylonite_sharp_lcd_info = {
|
|
.modes = sharp_ls037_modes,
|
|
.num_modes = 2,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
};
|
|
|
|
static void __init zylonite_init_lcd(void)
|
|
{
|
|
pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
|
|
platform_device_register(&zylonite_backlight_device);
|
|
|
|
if (lcd_id & 0x20) {
|
|
pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
|
|
return;
|
|
}
|
|
|
|
/* legacy LCD panels, it would be handy here if LCD panel type can
|
|
* be decided at run-time
|
|
*/
|
|
if (1)
|
|
zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
|
|
else
|
|
zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
|
|
|
|
pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
|
|
}
|
|
#else
|
|
static inline void zylonite_init_lcd(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC)
|
|
static struct pxamci_platform_data zylonite_mci_platform_data = {
|
|
.detect_delay_ms= 200,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.gpio_card_detect = EXT_GPIO(0),
|
|
.gpio_card_ro = EXT_GPIO(2),
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static struct pxamci_platform_data zylonite_mci2_platform_data = {
|
|
.detect_delay_ms= 200,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.gpio_card_detect = EXT_GPIO(1),
|
|
.gpio_card_ro = EXT_GPIO(3),
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static struct pxamci_platform_data zylonite_mci3_platform_data = {
|
|
.detect_delay_ms= 200,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.gpio_card_detect = EXT_GPIO(30),
|
|
.gpio_card_ro = EXT_GPIO(31),
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static void __init zylonite_init_mmc(void)
|
|
{
|
|
pxa_set_mci_info(&zylonite_mci_platform_data);
|
|
pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
|
|
if (cpu_is_pxa310())
|
|
pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
|
|
}
|
|
#else
|
|
static inline void zylonite_init_mmc(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
|
|
static const unsigned int zylonite_matrix_key_map[] = {
|
|
/* KEY(row, col, key_code) */
|
|
KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
|
|
KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
|
|
KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
|
|
KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
|
|
KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
|
|
KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
|
|
KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
|
|
|
|
KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
|
|
KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
|
|
KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
|
|
|
|
KEY(4, 5, KEY_SPACE),
|
|
KEY(5, 3, KEY_KPASTERISK), /* * */
|
|
KEY(5, 4, KEY_KPDOT), /* #" */
|
|
|
|
KEY(0, 7, KEY_UP),
|
|
KEY(1, 7, KEY_DOWN),
|
|
KEY(2, 7, KEY_LEFT),
|
|
KEY(3, 7, KEY_RIGHT),
|
|
KEY(2, 6, KEY_HOME),
|
|
KEY(3, 6, KEY_END),
|
|
KEY(6, 4, KEY_DELETE),
|
|
KEY(6, 6, KEY_BACK),
|
|
KEY(6, 3, KEY_CAPSLOCK), /* KEY_LEFTSHIFT), */
|
|
|
|
KEY(4, 6, KEY_ENTER), /* scroll push */
|
|
KEY(5, 7, KEY_ENTER), /* keypad action */
|
|
|
|
KEY(0, 4, KEY_EMAIL),
|
|
KEY(5, 6, KEY_SEND),
|
|
KEY(4, 0, KEY_CALENDAR),
|
|
KEY(7, 6, KEY_RECORD),
|
|
KEY(6, 7, KEY_VOLUMEUP),
|
|
KEY(7, 7, KEY_VOLUMEDOWN),
|
|
|
|
KEY(0, 6, KEY_F22), /* soft1 */
|
|
KEY(1, 6, KEY_F23), /* soft2 */
|
|
KEY(0, 3, KEY_AUX), /* contact */
|
|
};
|
|
|
|
static struct matrix_keymap_data zylonite_matrix_keymap_data = {
|
|
.keymap = zylonite_matrix_key_map,
|
|
.keymap_size = ARRAY_SIZE(zylonite_matrix_key_map),
|
|
};
|
|
|
|
static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
|
|
.matrix_key_rows = 8,
|
|
.matrix_key_cols = 8,
|
|
.matrix_keymap_data = &zylonite_matrix_keymap_data,
|
|
|
|
.enable_rotary0 = 1,
|
|
.rotary0_up_key = KEY_UP,
|
|
.rotary0_down_key = KEY_DOWN,
|
|
|
|
.debounce_interval = 30,
|
|
};
|
|
|
|
static void __init zylonite_init_keypad(void)
|
|
{
|
|
pxa_set_keypad_info(&zylonite_keypad_info);
|
|
}
|
|
#else
|
|
static inline void zylonite_init_keypad(void) {}
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
|
|
static struct mtd_partition zylonite_nand_partitions[] = {
|
|
[0] = {
|
|
.name = "Bootloader",
|
|
.offset = 0,
|
|
.size = 0x060000,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
[1] = {
|
|
.name = "Kernel",
|
|
.offset = 0x060000,
|
|
.size = 0x200000,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
[2] = {
|
|
.name = "Filesystem",
|
|
.offset = 0x0260000,
|
|
.size = 0x3000000, /* 48M - rootfs */
|
|
},
|
|
[3] = {
|
|
.name = "MassStorage",
|
|
.offset = 0x3260000,
|
|
.size = 0x3d40000,
|
|
},
|
|
[4] = {
|
|
.name = "BBT",
|
|
.offset = 0x6FA0000,
|
|
.size = 0x80000,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
/* NOTE: we reserve some blocks at the end of the NAND flash for
|
|
* bad block management, and the max number of relocation blocks
|
|
* differs on different platforms. Please take care with it when
|
|
* defining the partition table.
|
|
*/
|
|
};
|
|
|
|
static struct pxa3xx_nand_platform_data zylonite_nand_info = {
|
|
.parts = zylonite_nand_partitions,
|
|
.nr_parts = ARRAY_SIZE(zylonite_nand_partitions),
|
|
};
|
|
|
|
static void __init zylonite_init_nand(void)
|
|
{
|
|
pxa3xx_set_nand_info(&zylonite_nand_info);
|
|
}
|
|
#else
|
|
static inline void zylonite_init_nand(void) {}
|
|
#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
static struct pxaohci_platform_data zylonite_ohci_info = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT1 | ENABLE_PORT2 |
|
|
POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
|
};
|
|
|
|
static void __init zylonite_init_ohci(void)
|
|
{
|
|
pxa_set_ohci_info(&zylonite_ohci_info);
|
|
}
|
|
#else
|
|
static inline void zylonite_init_ohci(void) {}
|
|
#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
|
|
|
|
static void __init zylonite_init(void)
|
|
{
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
/* board-processor specific initialization */
|
|
zylonite_pxa300_init();
|
|
zylonite_pxa320_init();
|
|
|
|
/*
|
|
* Note: We depend that the bootloader set
|
|
* the correct value to MSC register for SMC91x.
|
|
*/
|
|
smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
|
|
smc91x_resources[1].end = PXA_GPIO_TO_IRQ(gpio_eth_irq);
|
|
platform_device_register(&smc91x_device);
|
|
|
|
pxa_set_ac97_info(NULL);
|
|
zylonite_init_lcd();
|
|
zylonite_init_mmc();
|
|
zylonite_init_keypad();
|
|
zylonite_init_nand();
|
|
zylonite_init_leds();
|
|
zylonite_init_ohci();
|
|
zylonite_init_wm9713_audio();
|
|
}
|
|
|
|
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
|
|
.atag_offset = 0x100,
|
|
.map_io = pxa3xx_map_io,
|
|
.nr_irqs = ZYLONITE_NR_IRQS,
|
|
.init_irq = pxa3xx_init_irq,
|
|
.handle_irq = pxa3xx_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = zylonite_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|