mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-29 05:44:11 +00:00
20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
75 lines
1.6 KiB
YAML
75 lines
1.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Aptina MT9V111 CMOS sensor
|
|
|
|
maintainers:
|
|
- Jacopo Mondi <jacopo@jmondi.org>
|
|
|
|
description: |
|
|
The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
|
|
based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
|
|
|
|
The sensor has an active pixel array of 640x480 pixels and can output a number
|
|
of image resolutions and formats controllable through a simple two-wires
|
|
interface.
|
|
|
|
properties:
|
|
compatible:
|
|
const: aptina,mt9v111
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
enable-gpios:
|
|
description: Enable signal, pin name "OE#". Active low.
|
|
maxItems: 1
|
|
|
|
standby-gpios:
|
|
description: |
|
|
Low power state control signal, pin name "STANDBY". Active high.
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
description: Chip reset signal, pin name "RESET#". Active low.
|
|
maxItems: 1
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: |
|
|
Output video port.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
camera@48 {
|
|
compatible = "aptina,mt9v111";
|
|
reg = <0x48>;
|
|
clocks = <&camera_clk>;
|
|
|
|
port {
|
|
mt9v111_out: endpoint {
|
|
remote-endpoint = <&ceu_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|