142 lines
3.2 KiB
YAML
142 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (c) 2022 Amarulasolutions
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Omnivision OV5693/OV5695 CMOS Sensors
|
|
|
|
maintainers:
|
|
- Tommaso Merciai <tomm.merciai@gmail.com>
|
|
|
|
description: |
|
|
The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS
|
|
image sensors that deliver 2592x1944 at 30fps. It provides full-frame,
|
|
sub-sampled, and windowed 10-bit MIPI images in various formats via the
|
|
Serial Camera Control Bus (SCCB) interface.
|
|
|
|
OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus
|
|
(SCCB). The sensor output is available via CSI-2 serial data output (up to
|
|
2-lane).
|
|
|
|
allOf:
|
|
- $ref: /schemas/media/video-interface-devices.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: ovti,ov5693
|
|
then:
|
|
properties:
|
|
port:
|
|
properties:
|
|
endpoint:
|
|
required:
|
|
- link-frequencies
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- ovti,ov5693
|
|
- ovti,ov5695
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
description:
|
|
System input clock (aka XVCLK). From 6 to 27 MHz.
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
const: xvclk
|
|
|
|
dovdd-supply:
|
|
description:
|
|
Digital I/O voltage supply, 1.8V.
|
|
|
|
avdd-supply:
|
|
description:
|
|
Analog voltage supply, 2.8V.
|
|
|
|
dvdd-supply:
|
|
description:
|
|
Digital core voltage supply, 1.2V.
|
|
|
|
reset-gpios:
|
|
description:
|
|
The phandle and specifier for the GPIO that controls sensor reset.
|
|
This corresponds to the hardware pin XSHUTDN which is physically
|
|
active low.
|
|
maxItems: 1
|
|
|
|
port:
|
|
description: MIPI CSI-2 transmitter port
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
link-frequencies: true
|
|
|
|
data-lanes:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
required:
|
|
- data-lanes
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- port
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/px30-cru.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ov5693: camera@36 {
|
|
compatible = "ovti,ov5693";
|
|
reg = <0x36>;
|
|
|
|
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cif_clkout_m0>;
|
|
|
|
clocks = <&cru SCLK_CIF_OUT>;
|
|
assigned-clocks = <&cru SCLK_CIF_OUT>;
|
|
assigned-clock-rates = <19200000>;
|
|
|
|
avdd-supply = <&vcc_1v8>;
|
|
dvdd-supply = <&vcc_1v2>;
|
|
dovdd-supply = <&vcc_2v8>;
|
|
|
|
rotation = <90>;
|
|
orientation = <0>;
|
|
|
|
port {
|
|
ucam_out: endpoint {
|
|
remote-endpoint = <&mipi_in_ucam>;
|
|
data-lanes = <1 2>;
|
|
link-frequencies = /bits/ 64 <450000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|